Synthesis of Mesoporous and Hollow SiO2@ Eu(TTA)3phen with Enhanced Fluorescence Properties.

Lanthanide ions are extensively utilized in optoelectronic materials, owing to their narrow emission bandwidth, prolonged lifetime, and elevated fluorescence quantum yield. Inorganic non-metallic materials commonly serve as host matrices for lanthanide complexes, posing noteworthy challenges regarding loading quantity and fluorescence performance stability post-loading. In this investigation, an enhanced Stöber method was employed to synthesize mesoporous hollow silica, and diverse forms of SiO2@Eu(TTA)3phen (S@Eu) were successfully prepared. Transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), Fourier-transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS) outcomes revealed the effective binding of silica with Eu(TTA)3phen through both physical adsorption and chemical bonding. This includes the formation of Si-O-C bonds between silica and the ligand, as well as Si-O-Eu bonds between silica and europium ions. Fluorescence tests demonstrated that the mesoporous SiO2@Eu(TTA)3phen(MS@Eu) composite exhibited the highest fluorescence intensity among the three structured silica composites, with a notable enhancement of 46.60% compared to the normal SiO2@Eu(TTA)3phen composite. The Brunauer-Emmett-Teller (BET) analysis indicated that the specific surface area plays a crucial role in influencing the fluorescence intensity of SiO2@Eu(TTA)3phen, whereby the prepared mesoporous hollow silica further elevated the fluorescence intensity by 61.49%. Moreover, SiO2@Eu(TTA)3phen demonstrated 11.11% greater cyclic stability, heightened thermal stability, and enhanced alkaline resistance relative to SiO2@Eu(TTA)3phen.

Revisiting the Intriguing Electronic Features of the BeOBeC Carbyne and Some Isomers: A Quantum-Chemical Assessment.

Extensive high-level quantum-chemical calculations reveal that the rod-shaped molecule BeOBeC, which was recently generated in matrix experiments, exists in two nearly isoenergetic states, the 5 Σ quintet (5 6) and the 3 Σ triplet (3 6). Their IR features are hardly distinguishable at finite temperature. The major difference concerns the mode of spin coupling between the terminal beryllium and carbon atoms. Further, the ground-state potential-energy surface of the [2Be,C,O] system at 4 K is presented and differences between the photochemical and thermal behaviors are highlighted. Finally, a previously not considered, so far unknown C2v -symmetric rhombus-like four-membered ring 3 [Be(O)(C)Be] (3 5) is predicted to represent the global minimum on the potential-energy surface.

On the Crucial Role of Isolated Electronic States in the Thermal Reaction of ReC+ with Dihydrogen.

Presented here is that isolated, long-lived electronic states of ReC+ serve as the root cause for distinctly different reactivities of this diatomic ion in the thermal activation of dihydrogen. Detailed high-level quantum chemical calculations support the experimental findings obtained in the highly diluted gas phase using FT-ICR mass spectrometry. The origin for the existence of these long-lived excited electronic states and the resulting implications for the varying mechanisms of dihydrogen splitting are addressed.

Counter-Intuitive Gas-Phase Reactivities of [V2 ]+ and [V2 O]+ towards CO2 Reduction: Insight from Electronic Structure Calculations.

[V2 O]+ remains "invisible" in the thermal gas-phase reaction of bare [V2 ]+ with CO2 giving rise to [V2 O2 ]+ ; this is because the [V2 O]+ intermediate is being consumed more than 230 times faster than it is generated. However, the fleeting existence of [V2 O]+ and its involvement in the [V2 ]+ → [V2 O2 ]+ chemistry are demonstrated by a cross-over labeling experiment with a 1:1 mixture of C16 O2 /C18 O2 , generating the product ions [V2 16 O2 ]+ , [V2 16 O18 O]+ , and [V2 18 O2 ]+ in a 1:2:1 ratio. Density functional theory (DFT) calculations help to understand the remarkable and unexpected reactivity differences of [V2 ]+ versus [V2 O]+ towards CO2 .

Effects of Rolling-Sliding Mechanical Stimulation on Cartilage Preserved In Vitro.

INTRODUCTION: Mechanical stimulation is important for maintaining cartilage function. We used a loading device to exert rolling-sliding mechanical stimulation on cartilage preserved in vitro to investigate cartilage viability and the involved mechanisms. METHODS: Osteochondral grafts from pig knees were randomly classified into loading and control groups. The loading group cartilage was subjected to cycles of mechanical stimulation with specified frequency/time/pressure combinations every 3 days; Then the DMEM was refreshed, and the cartilage was preserved in vitro. The control group cartilage was preserved in DMEM throughout the process and was changed every 3 days. On days 14 and 28, the chondrocyte survival rate, histology, and Young's modulus of the cartilage were measured. Western blots were performed after 2 h of loading to evaluate the protein expression. RESULTS: The loading group showed a significantly higher chondrocyte survival rate, proteoglycan and type II collagen content, and Young's modulus than did the control group on day 14, but no statistically significant differences were found on day 28. After two hours of the loading, the phosphorylation levels of MEK and ERK1/2 increased, and the expression of caspase-3, cleaved caspase-3 and bax decreased. CONCLUSION: These results suggest that periodic rolling-sliding mechanical stimulation can increase cartilage vitality in 2 weeks; a possible mechanism is that mechanical stimulation activates the MEK/ERK signalling pathway, thus inhibiting apoptotic protein expression. This loading preservation scheme could be used by cartilage tissue banks to improve cartilage preservation in vitro and enhance the quality of cartilage repair.

Complete cleavage of the N≡N triple bond by Ta2N+ via degenerate ligand exchange at ambient temperature: A perfect catalytic cycle.

An unprecedented, spontaneous, and complete cleavage of the triple bond of N2 in the thermal reaction of 15N2 with Ta214N+ was observed experimentally by Fourier transform ion cyclotron resonance mass spectrometry; mechanistic aspects of the degenerate ligand exchange were addressed by high-level quantum chemical calculations. The "hidden" dis- and reassembly of N2, mediated by Ta2N+, constitutes a full catalytic cycle. A frontier orbital analysis reveals that the scission of the N2 triple bond is essentially governed by the donation of d-electrons from the 2 metal centers into antibonding π*-orbitals of N2 and by the concurrent migration of electrons from bonding π- and σ-orbitals of N2 into empty d-orbitals of the metals. This work may contribute to a rational design of catalysts in order to reduce the still enormous energy demand required for an artificial dinitrogen activation.

Rolling-sliding load decreases the loss of chondrocyte viability and the mechanical properties of cartilage explants preserved in vitro.

The viability of cartilage explants preserved in vitro decreases with time, which limits its use for transplantation. The effect of mechanical stimulation to cartilage explants in vitro is unknown. In this study, we observed the effects of mechanical stimulation on chondrocyte viability and the mechanical properties of cartilage explants preserved in vitro using a rolling-sliding loading device designed by us, and the optimal stimulation protocol was established. A cylindrical osteochondral mass drilled on the femoral condyle of a healthy pig was divided into two groups (loading group and control group), and changes in the chondrocyte survival rate, matrix composition and cartilage biomechanical properties was observed at different time points. Additionally, the mRNA expression of the apoptosis-related proteins caspase-3/Bax/Bcl-2, the cytoskeletal proteins actin/vimentin, and the matrix-related protein MMP13 were detected. The loading group exhibited delayed collagen and aggrecan degeneration and improved chondrocyte viability for three days. Protein and mRNA detection showed that apoptotic factors such as caspase-3 and Bax decreased rapidly in cartilage tissue after loading. The cytoskeletal proteins actin and vimentin showed no significant changes in mRNA expression in the control group, but was significantly higher in the loading group. MMP-13 mRNA expression was significantly higher in both the control group and loading group. Overall, this study suggests that suitable mechanical stimulation decreases the loss of chondrocyte viability and the mechanical properties of cartilage explants in vitro and improves cartilage preservation.

A Reaction-Induced Localization of Spin Density Enables Thermal C-H Bond Activation of Methane by Pristine FeC4.

The reactivity of the cationic metal-carbon cluster FeC4 + towards methane has been studied experimentally using Fourier-transform ion cyclotron resonance mass spectrometry and computationally by high-level quantum chemical calculations. At room temperature, FeC4 H+ is formed as the main ionic product, and the experimental findings are substantiated by labeling experiments. According to extensive quantum chemical calculations, the C-H bond activation step proceeds through a radical-based hydrogen-atom transfer (HAT) mechanism. This finding is quite unexpected because the initial spin density at the terminal carbon atom of FeC4 + , which serves as the hydrogen acceptor site, is low. However, in the course of forming an encounter complex, an electron from the doubly occupied sp-orbital of the terminal carbon atom of FeC4 + migrates to the singly occupied π*-orbital; the latter is delocalized over the entire carbon chain. Thus, a highly localized spin density is generated in situ at the terminal carbon atom. Consequently, homolytic C-H bond activation occurs without the obligation to pay a considerable energy penalty that is usually required for HAT involving closed-shell acceptor sites. The mechanistic insights provided by this combined experimental/computational study extend the understanding of methane activation by transition-metal carbides and add a new facet to the dizzying mechanistic landscape of hydrogen-atom transfer.

Reassessment of the Mechanisms of Thermal C-H Bond Activation of Methane by Cationic Magnesium Oxides: A Critical Evaluation of the Suitability of Different Density Functionals.

The mechanisms of the thermal reactions of the two iconic magnesium oxide cations MgO.+ and Mg2 O2.+ with methane have been re-evaluated at the CCSD(T)/CBS//CCSD/def2-TZVP level of theory. For the reaction of MgO.+ with CH4 , only the classical hydrogen-atom transfer (HAT) was found; in contrast, for the Mg2 O2.+ /CH4 couple, both HAT and proton-coupled electron-transfer (PCET) exist as mechanistic variants. In order to evaluate the suitability of density functional theory (DFT) methods, the reactions were computed by using 27 density functionals. The results obtained demonstrate that the various DFT methods often deliver rather different results for both geometric and energetic features. As to the prediction of the apparent barriers, pure functionals give the largest mean absolute errors. BMK, ωB97XD, and the double-hybrid functional mPW2PLYP were confirmed to come closest to the results provided by CCSD(T)/CBS. Thus, mechanistic conclusions based on a single DFT method should be viewed with great caution. In summary, this study may assist in the selection of a suitable quantum chemical method to unravel the mechanistic details of C-H bond activation by charged metal oxides.

Intrinsic Reactivity of Diatomic 3d Transition-Metal Carbides in the Thermal Activation of Methane: Striking Electronic Structure Effects.

Mechanistic aspects of the C-H bond activation of methane by metal-carbide cations MC+ of the 3d transition-metals Sc-Zn were elucidated by NEVPT2//CASSCF quantum-chemical calculations and verified experimentally for M = Ti, V, Fe, and Cu by using Fourier transform ion-cyclotron resonance mass spectrometry. While MC+ species with M = Sc, Ti, V, Cr, Cu, and Zn activate CH4 at ambient temperature, this is prevented with carbide cations of M = Mn, Fe, and Co by high apparent barriers; NiC+ has a small apparent barrier. Hydrogen-atom transfers from methane to metal-carbide cations were found to proceed via a proton-coupled electron transfer mechanism for M = Sc-Co; wherein the doubly occupied πxz/yz-orbitals between metal and carbon at the carbon site serve as electron donors and the corresponding metal-centered vacant π*xz/yz-orbitals as electron acceptors. Classical hydrogen-atom transfer transpires only in the case of NiC+, while ZnC+ follows a mechanistic scenario, in which a formally hydridic hydrogen is transferred. CuC+ reacts by a synchronous activation of two C-H bonds. While spin density is often so crucial for the reactions of numerous MO+/CH4 couples, it is much less important for the C-H bond activation by carbide cations of the 3d transition-metals, in which one notes large changes in bond dissociation energies, spin states, number of d-electrons, and charge distributions. All these factors jointly affect both the reactivity of the metal carbides and their mechanisms of C-H bond activation.

Ta2+-mediated ammonia synthesis from N2 and H2 at ambient temperature.

In a full catalytic cycle, bare Ta2+ in the highly diluted gas phase is able to mediate the formation of ammonia in a Haber-Bosch-like process starting from N2 and H2 at ambient temperature. This finding is the result of extensive quantum chemical calculations supported by experiments using Fourier transform ion cyclotron resonance MS. The planar Ta2N2+, consisting of a four-membered ring of alternating Ta and N atoms, proved to be a key intermediate. It is formed in a highly exothermic process either by the reaction of Ta2+ with N2 from the educt side or with two molecules of NH3 from the product side. In the thermal reaction of Ta2+ with N2, the N≡N triple bond of dinitrogen is entirely broken. A detailed analysis of the frontier orbitals involved in the rate-determining step shows that this unexpected reaction is accomplished by the interplay of vacant and doubly occupied d-orbitals, which serve as both electron acceptors and electron donors during the cleavage of the triple bond of N≡N by the ditantalum center. The ability of Ta2+ to serve as a multipurpose tool is further shown by splitting the single bond of H2 in a less exothermic reaction as well. The insight into the microscopic mechanisms obtained may provide guidance for the rational design of polymetallic catalysts to bring about ammonia formation by the activation of molecular nitrogen and hydrogen at ambient conditions.

Oriented external electric fields as mimics for probing the role of metal ions and ligands in the thermal gas-phase activation of methane.

In the course of combined computational and mass spectrometry-based mechanistic studies, recently we came across rather unusual, if not unprecedented, effects of transition-metal ions and ligands when simple metal oxides or carbides are subjected to thermal gas-phase reactions with methane. Interestingly, "Gedankenexperiments" demonstrate how these effects can be modeled using oriented external electric fields (OEEFs), thus expanding their predicted role as "smart reagents" (Shaik et al., Nat. Chem., 2016, 8, 1091), and further suggesting that the OEEFs may be used in controlling the adsorption/desorption behavior of methane as well as serving as a tool to explore mechanistic features.

Thermal O-H Bond Activation of Water As Mediated by Heteronuclear [Al2Mg2O5]•+: Evidence for Oxygen-Atom Scrambling.

Mechanistic insight into the thermal O-H bond activation of water by the cubane-like, prototypical heteronuclear oxide cluster [Al2Mg2O5]•+ has been derived from a combined experimental/computational study. Experiments in the highly diluted gas phase using Fourier transform ion-cyclotron resonance mass spectrometry show that hydrogen-atom abstraction from water by the cluster cation [Al2Mg2O5]•+ occurs at ambient conditions accompanied by the liberation of an OH• radical. Because of a complete randomization of all oxygen atoms prior to fragmentation, about 83% of the oxygen atoms of the hydroxyl radical released originate from the oxide cluster itself. The experimental findings are supported by detailed high-level quantum chemical calculations. The theoretical analysis reveals that the transfer of a formal hydrogen atom from water to the metal-oxide cation can proceed mechanistically via proton- or hydrogen-atom transfer exploiting different active sites of the cluster oxide. In addition to the unprecedented oxygen-atom scrambling, one of the more general and quite unexpected findings concerns the role of spin density at the hydrogen-acceptor oxide atom. While this feature is crucial for [M-O]+/CH4 couples, it is much less important in the O-H bond activation of water.

Electrostatic and Charge-Induced Methane Activation by a Concerted Double C-H Bond Insertion.

A mechanistically unique, simultaneous activation of two C-H bonds of methane has been identified during the course of its reaction with the cationic copper carbide, [Cu-C]+. Detailed high-level quantum chemical calculations support the experimental findings obtained in the highly diluted gas phase using FT-ICR mass spectrometry. The behavior of [Cu-C]+/CH4 contrasts that of [Au-C]+/CH4, for which a stepwise bond-activation scenario prevails. An explanation for the distinct mechanistic differences of the two coinage metal complexes is given. It is demonstrated that the coupling of [Cu-C]+ with methane to form ethylene and Cu+ is modeled very well by the reaction of a carbon atom with methane mediated by an oriented external electric field of a positive point charge.

Benchmark study on methanol C-H and O-H bond activation by bare [Fe(IV)O](2+).

We present a high-level computational study on methanol C-H and O-H bond cleavages by bare [Fe(IV)O](2+), as well as benchmarks of various density functional theory (DFT) methods. We considered direct and concerted hydrogen transfer (DHT and CHT) pathways, respectively. The potential energy surfaces were constructed at the CCSD(T)/def2-TZVPP//B3LYP/def2-TZVP level of theory. Mechanistically, (1) the C-H bond cleavage is dominant and the O-H activation only plays minor role on the PESs; (2) the DHT from methyl should be the most practical channel; and (3) electronic structure analysis demonstrates the proton and electron transfer coupling behavior along the reaction coordinates. The solvent effect is evident and plays distinct roles in regulating the two bond activations in different mechanisms during the catalysis. The effect of optimizing the geometries using different density functionals was also studied, showing that it is not meaningful to discuss which DFT method could give the accurate prediction of the geometries, especially for transition structures. Furthermore, the gold-standard CCSD(T) method was used to benchmark 19 different density functionals with different Hartree-Fock exchange fractions. The results revealed that (i) the structural factor plays a minor role in the single point energy (SPE) calculations; (ii) reaction energy prediction is quite challenging for DFT methods; (iii) the mean absolute deviations (MADs) reflect the problematic description of the DFs when dealing with metal oxidation state change, giving a strong correlation on the HF exchange in the DFs. Knowledge from this study should be of great value for computational chemistry, especially for the de novo design of transition metal catalysts.

Does a higher metal oxidation state necessarily imply higher reactivity toward H-atom transfer? A computational study of C-H bond oxidation by high-valent iron-oxo and -nitrido complexes.

In this work, the reactions of C-H bond activation by two series of iron-oxo ( (Fe(IV)), (Fe(V)), (Fe(VI))) and -nitrido model complexes ( (Fe(IV)), (Fe(V)), (Fe(VI))) with a nearly identical coordination geometry but varying iron oxidation states ranging from iv to vi were comprehensively investigated using density functional theory. We found that in a distorted octahedral coordination environment, the iron-oxo species and their isoelectronic nitrido analogues feature totally different intrinsic reactivities toward C-H bond cleavage. In the case of the iron-oxo complexes, the reaction barrier monotonically decreases as the iron oxidation state increases, consistent with the gradually enhanced electrophilicity across the series. The iron-nitrido complex is less reactive than its isoelectronic iron-oxo species, and more interestingly, a counterintuitive reactivity pattern was observed, i.e. the activation barriers essentially remain constant independent of the iron oxidation states. The detailed analysis using the Polanyi principle demonstrates that the different reactivities between these two series originate from the distinct thermodynamic driving forces, more specifically, the bond dissociation energies (BDEE-Hs, E = O, N) of the nascent E-H bonds in the FeE-H products. Further decomposition of the BDEE-Hs into the electron and proton affinity components shed light on how the oxidation states modulate the BDEE-Hs of the two series.

Large equatorial ligand effects on C-H bond activation by nonheme iron(IV)-oxo complexes.

In this article, we present density functional theory (DFT) calculations on the iron(IV)-oxo catalyzed methane C-H activation reactions for complexes in which the Fe(IV)═O core is surrounded by five negatively charged ligands. We found that it follows a hybrid pathway that mixes features of the classical σ- and π-pathways in quintet surfaces. These calculations show that the Fe-O-H arrangement in this hybrid pathway is bent in sharp contrast to the collinear character as observed for the classical quintet σ-pathways before. The calculations have also shown that it is the equatorial ligands that play key roles in tuning the reactivity of Fe(IV)═O complexes. The strong π-donating equatorial ligands employed in the current study cause a weak π(FeO) bond and thereby shift the electronic accepting orbitals (EAO) from the vertically orientated O pz orbital to the horizontally orientated O px. In addition, all the equatorial ligands are small in size and would therefore be expected have small steric effects upon substrate horizontal approaching. Therefore, for the small and strong π-donating equatorial ligands, the collinear Fe-O-H arrangement is not the best choice for the quintet reactivity. This study adds new element to iron(IV)-oxo catalyzed C-H bond activation reactions.

Electronic structure analysis of multistate reactivity in transition metal catalyzed reactions: the case of C-H bond activation by non-heme iron(IV)-oxo cores.

This perspective discusses the principles of the multistate scenario often encountered in transition metal catalyzed reactions, and is organized as follows. First, several important theoretical concepts (physical versus formal oxidation states, orbital interactions, use of (spin) natural and corresponding orbitals, exchange enhanced reactivity and the connection between valence bond and molecular orbital based electronic structure analysis) are presented. These concepts are then used to analyze the electronic structure changes occurring in the reaction of C-H bond oxidation by Fe(IV)oxo species. The analysis reveals that the energy separation and the overlap between the electron donating orbitals and electron accepting orbitals of the Fe(IV)oxo complexes dictate the reaction stereochemistry, and that the manner in which the exchange interaction changes depends on the identity of these orbitals. The electronic reorganization of the Fe(IV)oxo species during the reaction is thoroughly analyzed and it is shown that the Fe(IV)oxo reactant develops oxyl radical character, which interacts effectively with the σCH orbital of the alkane. The factors that determine the energy barrier for the reaction are discussed in terms of molecular orbital and valence bond concepts.

Hydrogen-bonding effects on the reactivity of [X-Fe(III)-O-Fe(IV)═O] (X = OH, F) complexes toward C-H bond cleavage.

Complexes 1-OH and 1-F are related complexes that share similar [X-Fe(III)-O-Fe(IV)═O](3+) core structures with a total spin S of ½, which arises from antiferromagnetic coupling of an S = 5/2 Fe(III)-X site and an S = 2 Fe(IV)═O site. EXAFS analysis shows that 1-F has a nearly linear Fe(III)-O-Fe(IV) core compared to that of 1-OH, which has an Fe-O-Fe angle of ~130° due to the presence of a hydrogen bond between the hydroxo and oxo groups. Both complexes are at least 1000-fold more reactive at C-H bond cleavage than 2, a related complex with a [OH-Fe(IV)-O-Fe(IV)═O](4+) core having individual S = 1 Fe(IV) units. Interestingly, 1-F is 10-fold more reactive than 1-OH. This raises an interesting question about what gives rise to the reactivity difference. DFT calculations comparing 1-OH and 1-F strongly suggest that the H-bond in 1-OH does not significantly change the electrophilicity of the reactive Fe(IV)═O unit and that the lower reactivity of 1-OH arises from the additional activation barrier required to break its H-bond in the course of H-atom transfer by the oxoiron(IV) moiety.