Photocatalytic degradation of Acid Red 18 by synthesized AgCoFe2O4@Ch/AC: Recyclable, environmentally friendly, chemically stable, and cost-effective magnetic nano hybrid catalyst.

Chitosan (Ch) is a linear biodegradable natural carbohydrate polymer and the most appealing biopolymer, such as low-cost biodegradability, biocompatibility, hydrophilicity, and non-toxicity. In this case, Ch was utilized to synthesize AgCoFe2O4@Ch/Activated Carbon (AC) by the modified microwave-assisted co-precipitation method. The physical and chemical structure of magnetic nanocomposites was analyzed and characterized by Field Emission Scanning Electron Microscope (FESEM), Transmission electron microscopy (TEM), X-ray diffraction (XRD), Energy Dispersive Spectroscopy (EDS), Diffuse Reflection Spectroscopy (DRS), Value stream mapping (VSM), Fourier transform spectroscopy (FTIR) and BET. The effects of various parameters on the removal of dye (Acid Red18), including catalyst dose, dye concentration, pH, and time were studied. Results showed that the highest removal efficiencies were 96.68 % and 84 % for the synthetic sample and actual wastewater, respectively, in optimal conditions (pH: 3, the initial dye concentration: 10 mgL-1, the catalyst dose: 0.14 gL-1, time: 50 min). Mineralization, according to the COD analysis, was 89.56 %. Photocatalytic degradation kinetics of Acid Red 18 followed pseudo-first order and Langmuir-Hinshelwood with constants of kc = 0.12 mg L-1 min-1 and KL-H = 0.115 Lmg-1. Synthesized photocatalytic AgCoFe2O4@Ch/AC showed high stability and after five recycling cycles was able to remove the pollutant with an efficiency of 85.6 %. So, the synthesized heterogenous magnetic nanocatalyst AgCoFe2O4@Ch/AC was easily recycled from aqueous solutions and it can be used in the removal of dyes from industries with high efficiency.

An effective magnetic nanobiocomposite: Preparation, characterization and its application for adsorption removal of P-nitroaniline from aquatic environments.

In this investigation, a magnetic nanobiocomposite, denoted as CoFe2O4/Activated Carbon integrated with Chitosan (CoFe2O4/AC@Ch), was synthesized based on a microwave-assisted for the efficacious adsorption of P-nitroaniline (PNA). The physicochemical properties of the said nano biocomposite were thoroughly characterized using a suite of analytical methodologies, namely FESEM/EDS, BET, FTIR, XRD, and VSM. The results confirm the successful synthesis of the nanobiocomposite, with its point of zero charge (pHZPC) determined to be 6.4. Adsorptive performance towards PNA was systematically examined over a spectrum of conditions, encompassing variations in PNA concentration (spanning 10-40 mg/L), adsorbent concentration (10-200 mg/L), contact periods (2.5-22.5 min), and solution pH (3-11). Upon optimization, the conditions converged to an adsorbent concentration of 200 mg/L, pH 5, PNA concentration of 10 mg/L, and a contact duration of 22.5 min, under which an impressive PNA adsorption efficacy of 98.6% was attained. Kinetic and isotherm analyses insinuated the adsorption mechanism to adhere predominantly to the pseudo-second-order kinetic and Langmuir isotherm models. The magnetic nanocomposite was recovered and used in 4 cycles, and the absorption rate reached 86%, which shows the good stability of the magnetic nanocomposite in wastewater treatment. Conclusively, these empirical outcomes underscore the viability of the formulated magnetic nanobiocomposite as a potent, recyclable adsorbent for the proficient extraction of PNA from aqueous matrices.

Hybrid UV/COP advanced oxidation process using ZnO as a catalyst immobilized on a stone surface for degradation of acid red 18 dye.

Azo dyes are the largest group of synthetic organic dyes which containing the linkage C-N[bond, double bond]N-C and used in various industries such as textile industries leather articles, and some foods. Azo dyes are resistant compounds against the biodegradation processes. The purpose of this research was hybrid UV/COP advanced oxidation process using ZnO as a catalyst immobilized on a stone surface for degradation of acid red 18 (AR18) Dye. In the hybrid process using some parameters such as the dye initial concentration, pH, contact time and catalyst concentration, the process efficiency was investigated. In order to the dye removal, the sole ozonation process (SOP), catalytic ozonation process (COP) and photocatalytic process (UV/ZnO) were used. The ZnO nanoparticles were characterized by XRD, SEM and TEM analyses.  The maximum dye removal was achieved 97% at the dye initial concentration 25 mg/L, catalyst concentration 3 g/L, contact time 40 min and pH 5. As a real sample, the Yazdbaf textile factory wastewater was selected. After that, the physicochemical quality was evaluated. As well as, in the optimal conditions, the AR18 dye removal efficiency was achieved 65%. The kinetic results demonstrated that the degradation reaction was fitted by pseudo-first-order kinetic. The UV/COP hybrid process had high efficiency for removal of resistant dyes from the textile wastewater. Advantages of this technique were as follows:•ZnO nanoparticles were synthesized as catalyst by thermal method and were immobilized on the stones.•pH changes had no significant effect on the removal efficiency.•In the kinetic studies, the decomposition reaction followed pseudo-first order kinetic.

Microwave-assisted preparation of ZnFe2O4@methyl cellulose as a new nano-biomagnetic photocatalyst for photodegradation of metronidazole.

In the present study, ZnFe2O4@methyl cellulose (MC) nano-biomagnetic photocatalyst was rapidly prepared based on a microwave-assisted method. FTIR, FESEM, EDS, UV-DRS, XRD, and VSM were performed to characterize the structure of as-prepared ZnFe2O4@MC. The removal efficiency of Metronidazole (MNZ) degradation was 92.65% and 71.12% in synthetic and real samples under optimal conditions, respectively. The removal efficiency of TOC was also reported to be 77.87% under optimal conditions. The kinetic linear models showed that the photocatalytic degradation of MNZ follows either a pseudo-first-order kinetic or the Langmuir-Hinshelwood model. The correlation coefficients (R2) were 0.92, 0.97, 0.99, and 0.94, respectively at 5, 10, 20, and 30 mg/L. The equilibrium adsorption coefficient (KL-H) of the Langmuir-Hinshelwood model and the superficial reaction rate constant (Kc) were 0.633 Lmg-1 and 0.203 mg/L min-1, respectively. The participation of active species such as holes and hydroxyl and superoxide radicals was studied during MNZ photodegradation with organic and inorganic radical scavengers. Finally, the nano-biomagnetic catalyst could be reused for six further runs without remarkable changes in catalytic efficiencies. In this study, we present a new magnetic nanocomposite and a novel strategy for antibiotic removal from aqueous media.