ABSTRACT
Reactions between tungsten alkylidyne [tBuOCO]W≡CtBu(THF)2 1 and sulfur containing small molecules are reported. Complex 1 reacts with CS2 to produce intermediate η2 bound CS2 complex [O2C(tBuCâ)W(η2-(S,C)-CS2)(THF)] 8. Heating complex 8 provides a mixture of a monomeric tungsten sulfido complex 9 and a dimeric complex 10 in a 4:1 ratio, respectively. Heating the mixture does not perturb the ratio. Addition of excess THF in a solution of 9 and 10 (4:1) converts 10 to 9 (>96%) with concomitant loss of (CS)x. Both 9 and 10 can be selectively crystallized from the mixture. An alternative synthesis of exclusively monomeric 9 involves the reaction between 1 and PhNCS. Demonstrating ring expansion metathesis polymerization (REMP), tethered tungsten alkylidene 8 polymerizes norbornene to produce cis-selective syndiotactic cyclic polynorbornene (c-poly(NBE)).
ABSTRACT
Small molecule photoswitches capable of toggling between two distinct molecular states in response to light are versatile tools to monitor biological processes, control photochemistry, and design smart materials. In this work, six novel dicyanorhodanine-based pyrrole-containing photoswitches are reported. The molecular design avails both the Z and E isomers from synthesis, where each can be isolated using chromatographic techniques. Inter- and intramolecular hydrogen bonding (H-bonding) interactions available to the E and Z isomers, respectively, uniquely impart thermal stability to each isomer over long time periods. Photoisomerization could be assessed by solution NMR and UV-vis spectroscopic techniques along with complementary ground- and excited-state computational studies, which show good agreement. Quantitative E â Z isomerization occurs upon 523 nm irradiation of the parent compound (where R = H) in solution, whereas Z â E isomerization using 404 nm irradiation offers a photostationary state (PSS) ratio of 84/16 (E/Z). Extending the π-conjugation of the pyrrole unit (where R = p-C6H4-OMe) pushes the maximum absorption to the yellow-orange region of the visible spectrum and allows bidirectional quantitative isomerization with 404 and 595 nm excitation. Comparator molecules have been prepared to report how the presence or absence of H-bonding affects the photoswitching behavior. Finally, studies of the photoswitches in neat films and photoinactive polymer matrices reveal distinctive structural and optical properties of the Z and E isomers and ultimately afford reversible photoswitching to spectrally unique PSSs using visible light sources including the Sun.
ABSTRACT
The development of a three-component cine,ipso-disubstitution of nitrocoumarins is reported. The reaction leverages the electrophilicity of nitrocoumarins, the nucleophilicity of nitronates, and the leaving group ability of nitrite (NO2-) to yield complex polyfunctionalized biaryls that often display stable axial chirality.
ABSTRACT
A new strategy to access α-functionalized alicyclic amines via their corresponding imine-BF3 complexes is reported. Isolable imine-BF3 complexes, readily prepared via dehydrohalogenation of N-bromoamines in a base-promoted/18-crown-6 catalyzed process followed by addition of boron trifluoride etherate, undergo reactions with a wide range of organometallic nucleophiles to afford α-functionalized azacycles. Organozinc and organomagnesium nucleophiles add at ambient temperatures, obviating the need for cryogenic conditions. In situ preparation of imine-BF3 complexes provides access to α-functionalized morpholines and piperazines directly from their parent amines in a single operation. α-Functionalized morpholines can be elaborated further, for instance by installing a second substituent in the α'-position.
ABSTRACT
Tacticity is critical to polymer properties. The influence of solvent on tacticity in the catalytic synthesis of cyclic polynorbornene (c-PNB) is reported. In toluene cis,syndiotactic c-PNB forms; in THF, cis,syn/iso c-PNB forms.
ABSTRACT
The synthesis, characterization, and preliminary activity of an unprecedented tethered alkylidyne tungsten complex for ring expansion alkyne metathesis polymerization (REAMP) are reported. The tethered alkylidyne 7 is generated rapidly by combining alkylidyne W(CtBu)(CH2tBu)(O-2,6-i-Pr2C6H3)2 (6) with 1 equiv of an yne-ol proligand (5). Characterized by NMR studies and nuclear Overhauser effect spectroscopy, complex 7 is a dimer. Each metal center contains a tungsten-carbon triple bond tethered to the metal center via an alkoxide ligand. The polymerization of the strained cycloalkyne 3,8-didodecyloxy-5,6-dihydro-11,12-didehydrodibenzo[a,e]-[8]annulene, 8, to generate cyclic polymers was demonstrated. Size exclusion chromatography (SEC) and intrinsic viscosity (η) measurements confirm the polymer's cyclic topology.
ABSTRACT
Reactions between imines and tungsten alkylidyne complexes are studied. The trianionic pincer ligand supported alkylidyne [tBuOCO]WCC(CH3)3(THF)2 (1) reacts with N-(R)-1-phenylmethanimine (PMI-R, R = Me, Ph, Bn, and TMS) yielding [tBuOC(H)O]W(η2-tBuCîCPh)N(R) (4-R), products from metathesis reaction. In contrast, the non-pincer alkylidyne (tBuO)3WîCC(CH3)3 does not react with PMI-R imines.
ABSTRACT
Biosynthetic modifications of the 6/10-bicyclic hydrocarbon skeletons of the eunicellane family of diterpenoids are unknown. We explored the biosynthesis of a bacterial trans-eunicellane natural product, albireticulone A (3), and identified a novel isomerase that catalyzes cryptic isomerization in the biosynthetic pathway. We also assigned functions of two cytochromes P450 that oxidize the eunicellane skeleton, one of which was a naturally evolved non-functional P450 that, when genetically repaired, catalyzes allylic oxidation. Finally, we described the chemical susceptibility of the trans-eunicellane skeleton to undergo Cope rearrangement to yield inseparable atropisomers.
Subject(s)
Cytochrome P-450 Enzyme System , Diterpenes , Isomerism , Cytochrome P-450 Enzyme System/metabolism , Diterpenes/metabolism , Oxidation-Reduction , Bacteria/metabolismABSTRACT
Enantioselective oxa-Pictet-Spengler reactions of tryptophol with aldehydes proceed under weakly acidic conditions utilizing a combination of two catalysts, an indoline HCl salt and a bisthiourea compound. Mechanistic investigations revealed the roles of both catalysts and confirmed the involvement of oxocarbenium ion intermediates, ruling out alternative scenarios. A stereochemical model was derived from density functional theory calculations, which provided the basis for the development of a highly enantioselective stereodivergent variant with racemic tryptophol derivatives.
ABSTRACT
The resorcinol-terpene phytocannabinoid template is a privileged scaffold for the development of diverse therapeutics targeting the endocannabinoid system. Axially chiral cannabinols (axCBNs) are unnatural cannabinols (CBNs) that bear an additional C10 substituent, which twists the cannabinol biaryl framework out of planarity creating an axis of chirality. This unique structural modification is hypothesized to enhance both the physical and biological properties of cannabinoid ligands, thus ushering in the next generation of endocannabinoid system chemical probes and cannabinoid-inspired leads for drug development. In this full report, we describe the philosophy guiding the design of axCBNs as well as several synthetic strategies for their construction. We also introduce a second class of axially chiral cannabinoids inspired by cannabidiol (CBD), termed axially chiral cannabidiols (axCBDs). Finally, we provide an analysis of axially chiral cannabinoid (axCannabinoid) atropisomerism, which spans two classes (class 1 and 3 atropisomers), and provide first evidence that axCannabinoids retainâand in some cases, strengthenâaffinity and functional activity at cannabinoid receptors. Together, these findings present a promising new direction for the design of novel cannabinoid ligands for drug discovery and exploration of the complex endocannabinoid system.
Subject(s)
Cannabidiol , Cannabinoids , Endocannabinoids , Receptors, Cannabinoid , Ligands , CannabinolABSTRACT
Water solubility measurements are required in drug discovery, in toxicological or environmental studies, and in developing industrial processes which employ extractions or crystallizations. The gold-standard shake-flask method is tedious and takes at least 24 h. We developed a nuclear magnetic resonance (NMR) method for automation, which has the same accuracy and solubility range as the shake-flask method, but a measurement can be made faster, since the analysis does not require separation of the phases. Samples of saturated solutions are analyzed in the presence of excess solute, since the NMR spectra do not show signals for the dispersed solids, and they tend to show separate signals for the dissolved and dispersed liquids. Spectra are acquired with water suppression, using a pulse sequence appropriate for quantitation. A sample of water is used as the external reference, and the concentration of the solute is determined using the PULCON relationship. An evaluation of the method in terms of selectivity, accuracy, precision, and limit of quantitation is presented in detail.
ABSTRACT
Described is an approach to preparing the first iClick network metallopolymers with porous properties. Treating digoldazido complex 2-AuN3 with trigoldacetylide 3-AuPPh3 or 3-AuPEt3, trialkyne 3-H, tetragoldacetylide 4-AuPPh3, or tetraalkyne 4-H in CH2Cl2 affords five iClick network metallopolymers 5-AuPPh3, 5-AuPEt3, 5-H, 6-AuPPh3, and 6-H. Confirmation of the iClick network metallopolymers comes from FTIR, 13C solid-state cross-coupling magic angle spinning (CPMAS) NMR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and nitrogen and CO2 sorption analysis. Employing model complexes 7-AuPPh3, 7-AuPEt3, 7-H, 8-AuPPh3, and 8-H provides structural insights due to the insolubility of iClick network metallopolymers.
Subject(s)
Calorimetry, Differential Scanning , Magnetic Resonance Spectroscopy/methodsABSTRACT
Secondary alicyclic amines are converted to α-aminonitriles via addition of TMSCN to their corresponding imines, intermediates that are produced in situ via the oxidation of amine-derived lithium amides with simple ketone oxidants. Amines with an existing α-substituent undergo regioselective α'-cyanation even if the C-H bonds at that site are less activated. Amine α-arylation can be combined with α'-cyanation to generate difunctionalized products in a single operation.
ABSTRACT
Dopamine regulates normal functions such as movement, reinforcement learning, and cognition, and its dysfunction has been implicated in multiple psychiatric and neurological disorders. Dopamine acts through D1- (D1R and D5R) and D2-class (D2R, D3R, and D4R) receptors and activates both G protein- and ß-arrestin-dependent signaling pathways. Current dopamine receptor-based therapies are used to ameliorate motor deficits in Parkinson's disease or as antipsychotic medications for schizophrenia. These drugs show efficacy for ameliorating only some symptoms caused by dopamine dysfunction and are plagued by debilitating side effects. Studies in primates and rodents have shown that shifting the balance of dopamine receptor signaling toward the arrestin pathway can be beneficial for inducing normal movement, while reducing motor side effects such as dyskinesias, and can be efficacious at enhancing cognitive function compared to balanced agonists. Several structure-activity relationship (SAR) studies have embarked on discovering ß-arrestin-biased dopamine agonists, focused on D2 partial agonists, noncatechol D1 agonists, and mixed D1/D2R dopamine receptor agonists. Here, we describe an SAR study to identify novel D1R ß-arrestin-biased ligands using A-86929, a high-affinity D1R catechol agonist, as a core scaffold to identify chemical motifs responsible for ß-arrestin-biased activity at both D1 and D2Rs. Most of the A-86929 analogs screened were G protein-biased, but none of them were exclusively arrestin-biased. Additionally, various small-fragment molecular probes displayed weak bias toward the ß-arrestin pathway. Continued in-depth SFSR (structure-functional selectivity relationship) studies informed by structure determination, molecular modeling, and mutagenesis studies will facilitate the discovery of potent and efficacious arrestin-biased dopamine receptor ligands.
Subject(s)
Dopamine Agonists , Dopamine , Animals , Dopamine/metabolism , Dopamine Agonists/pharmacology , GTP-Binding Proteins/metabolism , Ligands , Quinolones , Receptors, Dopamine D1/agonists , Receptors, Dopamine D2/metabolism , Thiophenes , beta-Arrestins/metabolismABSTRACT
Reported are structure-property-function relationships associated with a class of cyclic thiosulfonate molecules-disulfide-bond disrupting agents (DDAs)-with the ability to downregulate the Epidermal Growth Factor Receptor (HER) family in parallel and selectively induce apoptosis of EGFR+ or HER2+ breast cancer cells. Recent findings have revealed that the DDA mechanism of action involves covalent binding to the thiol(ate) from the active site cysteine residue of members of the protein disulfide isomerase (PDI) family. Reported is how structural modifications to the pharmacophore can alter the anticancer activity of cyclic thiosulfonates by tuning the dynamics of thiol-thiosulfonate exchange reactions, and the studies reveal a correlation between the biological potency and thiol-reactivity. Specificity of the cyclic thiosulfonate ring-opening reaction by a nucleophilic attack can be modulated by substituent addition to a parent scaffold. Lead compound optimization efforts are also reported, and have resulted in a considerable decrease of the IC50 /IC90 values toward HER-family overexpressing breast cancer cells.
Subject(s)
Antineoplastic Agents , Antineoplastic Agents/pharmacology , Cysteine , Protein Disulfide-Isomerases , Structure-Activity Relationship , Sulfhydryl Compounds/chemistryABSTRACT
The reactivity of phosphaalkynes, the isolobal and isoelectronic congeners to alkynes, with metal alkylidyne complexes is explored in this work. Treating the tungsten alkylidyne [t BuOCO]W≡Ct Bu(THF)2 (1) with phosphaalkyne (10) results in the formation of [O2 C(t BuC=)W{η2 -(P,C)-P≡C-Ad}(THF)] (13-t BuTHF ) and [O2 C(AdC=)W{η2 -(P,C)-P≡C-t Bu}(THF)] (13-AdTHF ); derived from the formal reductive migratory insertion of the alkylidyne moiety into a W-Carene bond. Analogous to alkyne metathesis, a stable phosphametallacyclobutadiene complex [t BuOCO]W[κ2 -C(t Bu)PC(Ad)] (14) forms upon loss of THF from the coordination sphere of either 13-t BuTHF or 13-AdTHF . Remarkably, the C-C bonds reversibly form/cleave with the addition or removal of THF from the coordination sphere of the formal tungsten(VI) metal center, permitting unprecedented control over the transformation of a tetraanionic pincer to a trianionic pincer and back. Computational analysis offers thermodynamic and electronic reasoning for the reversible equilibrium between 13-t Bu/AdTHF and 14.
ABSTRACT
Reported herein is the discovery of a diastereoselective indole-dearomative Cope rearrangement. A suite of minor driving forces promote dearomatization: (i) steric congestion in the starting material, (ii) alkylidene malononitrile and stilbene conjugation events in the product, and (iii) an unexpected intramolecular π-π* stack on the product side of the equilibrium. The key substrates are rapidly assembled from simple starting materials, resulting in many successful examples. The products are structurally complex and bear vicinal stereocenters generated by the dearomative Cope rearrangement. They also contain a variety of functional groups for interconversion to complex architectures.
ABSTRACT
Polyfunctionalized cyclohexanes are privileged scaffolds in drug discovery. Reported herein is a method for synthesizing 1,2,4-trifunctionalized cyclohexanes via diastereoselective reductive Cope rearrangement. The scaffolds obtained can be derivatized by orthogonal functional group interconversion to cyclohexanes bearing a 1-amide, 2-branched arylallyl, and variable 4-functional group.
ABSTRACT
This work outlines an approach to creating a catalyst for cyclic polymer synthesis using readily available materials in only one or two steps. Combining commercially available molybdenum-alkylidene 1 with two equivalents of ene-ol proligand 2 rapidly produces, in quantitative yield (1H NMR spectroscopy), the double tethered metallacyclobutane complex 3. Characterized by variable temperature NMR studies and nuclear Overhauser effect spectroscopy (NOESY) experiments, complex 3 exhibits fluxional behavior in solution. Determined by single crystal X-ray diffraction, the solid-state structure of complex 3 reveals metrical parameters indicating that the metallacyclobutane is not predicted to undergo rapid retro-cycloaddition. However, complex 3 is a precatalyst for the polymerization of norbornene to produce cyclic polynorbornene. An NMR spectrum of a test polymerization indicates that only a small fraction of the precatalyst is activated upon exposure to monomer. Quantifying the active catalyst is possible by measuring vinyl resonances that appear in the 1H NMR spectrum. The vinyl resonances are attributable to the release of one of the tethers upon norbornene addition. Confirmation of the polymer cyclic topology comes from gel permeation chromatography (GPC), dynamic light scattering (DLS), and intrinsic viscosity (η) measurements. The double tethered metallacyclobutane complex is a novel design for catalytic cyclic polymer synthesis. The synthetic approach suggests that catalyst tuning is possible by a choice of the commercial alkylidene and alteration of the ene-ol proligand.
Subject(s)
NorbornanesABSTRACT
Combining strain-promoted azide-alkyne cycloaddition (SPAAC) and inorganic click (iClick) reactivity provides access to metal 1,2,3-triazolates. Experimental and computational insights demonstrate that iClick reactivity of the tested metal azides (LM-N3, M = Au, W, Re, Ru and Pt) depends on the accessibility of the azide functionality rather than electronic effects imparted by the metal. SPAAC iClick reactivity with cyclooctyne is observed when the azide functionality is sterically unencumbered, e.g. [Au(N3)(PPh3)] (Au-N3), [W(η3-allyl)(N3)(bpy)(CO)2] (W-N3), and [Re(N3)(bpy)(CO)3] [bpy = 2,2'-bipyridine] (Re-N3). Increased steric bulk and/or preequilibria with high activation barriers prevent SPAAC iClick reactivity for the complexes [Ru(N3)(Tp)(PPh3)2] [Tp = tris(pyrazolyl)borate] (Ru-N3), [Pt(N3)(CH3)(PiPr3)2] [iPr = isopropyl] (Pt(II)-N3), and [Pt(N3)(CH3)3]4 ((PtN3)4). Based on these computational insights, the SPAAC iClick reactivity of [Pt(N3)(CH3)3(P(CH3)3)2] (Pt(IV)-N3) was successfully predicted.