ABSTRACT
BACKGROUND AND OBJECTIVE: Large, uniformly spaced, complex and time varying datasets derived from high resolution medical image velocimetry can provide a wealth of information regarding small-scale transient physiological flow phenomena and pulsation of anatomical boundaries. However, there remains a need for interpolation techniques to effectively reconstruct a fully 4-dimensional functional relationship from this data. This paper presents a preliminary evaluation of a 4-dimensional local radial basis function (RBF) algorithm as a means of addressing this problem for laminar flows. METHODS: A 4D interpolation algorithm is proposed based on a Local Hermitian Interpolation (LHI) using a combination of multi-quadric RBF with a partition of unity scheme. The domain is divided into uniform sub-systems with size restricted to immediately neighbouring points. The validity of the algorithm is first established on a known 4D analytical dataset and a CFD based laminar flow phantom. Application is then demonstrated through characterisation of a large 4D laminar flow dataset obtained from magnetic resonance imaging (MRI) measurements of cerebrospinal fluid velocities in the brain. RESULTS: Performance of the algorithm is compared to that of a quad-linear interpolation, demonstrating favourable improvement in accuracy. The technique is shown to be robust, computationally efficient and capable of refined interpolation in Euclidean space and time. Application to MR velocimetry data is shown to produce promising results for the 4D reconstruction of the transient flow field and movement of the fluid boundaries at spatial and temporal locations intermediate to the original data. CONCLUSION: This study has demonstrated feasibility of an accurate, stable and efficient 4-dimensional local RBF interpolation method for large, transient laminar flow velocimetry datasets. The proposed approach does not suffer from ill-conditioning or high computational cost due to domain decomposition into local stencils where the RBF is only ever applied to a limited number of points. This work offers a potential tool to assist medical diagnoses and drug delivery through better understanding of physiological flow fields such as cerebrospinal fluid. Further work will evaluate the technique on a wider range of flow fields and against CFD simulation.
ABSTRACT
In this paper we study the effects of dynamic wetting on the immiscible displacement of a high viscosity fluid subject to the radial injection of a less viscous fluid in a Hele-Shaw cell. The displaced fluid can leave behind a trailing film that coats the cell walls, dynamically affecting the pressure drop at the fluid interface. By considering the nonlinear pressure drop in a boundary element formulation, we construct a Picard scheme to iteratively predict the interfacial velocity and subsequent displacement in finite-mobility-ratio flow regimes. Dynamic wetting delays the onset of finger bifurcation in the late stages of interfacial growth and at high local capillary numbers can alter the fundamental mode of bifurcation, producing vastly different finger morphologies. In low mobility ratio regimes, we see that finger interaction is reduced and characteristic finger breaking mechanisms are delayed but never fully inhibited. In high mobility ratio regimes, finger shielding is reduced when dynamic wetting is present. Finger bifurcation is delayed, which allows the primary fingers to advance further into the domain before secondary fingers are generated, reducing the level of competition.
ABSTRACT
ΔV is frequently used to describe collision severity, and is often used by accident investigators to estimate speeds of vehicles prior to a collision, and by researchers looking for correlations between severity and outcome. This study identifies how ΔV varies over a wide range of input uncertainties allowing the direct comparison of different methods of input data collection in terms of their effect on uncertainty in the calculation of ΔV. Software was developed to implement this sensitivity analysis and was validated against examples presented in the CRASH3 manual. The findings are therefore representative of, and relevant to, commercially available tools such as CRASH3 and AIDamage. It is possible to measure the vehicle and collision parameters with sufficient accuracy to determine ΔV to a level of precision that is useful to predict occupant fatality. In many cases, ΔV is largely insensitive to the input parameter and category values or values determined from photographs may be used. A vehicle specific value of the stiffness parameter B should be used. Direct measurement of crush measurements and vehicle mass (including the best estimates of fluid loss) should be used. Similarly the mass of occupants and cargo should be measured directly rather than estimated from 50th centile values. Calculation of ΔV is sensitive to PDOF which should be measured with a precision of better than ±6°.
Subject(s)
Accidents, Traffic , Computer Simulation , Software , HumansABSTRACT
Cerebrospinal fluid (CSF) is a Newtonian fluid and can, therefore, be modelled using computational fluid dynamics (CFD). Previous modelling of the CSF has been limited to simplified geometric models. This work describes a geometrically accurate three dimensional (3D) computational model of the human ventricular system (HVS) constructed from magnetic resonance images (MRI) of the human brain. It is an accurate and full representation of the HVS and includes appropriately positioned CSF production and drainage locations. It was used to investigate the pulsatile motion of CSF within the human brain. During this investigation CSF flow rate was set at a constant 500 ml/day, to mimic real life secretion of CSF into the system, and a pulsing velocity profile was added to the inlets to incorporate the effect of cardiac pulsations on the choroid plexus and their subsequent influence on CSF motion in the HVS. Boundary conditions for the CSF exits from the ventricles (foramina of Magendie and Lushka) were found using a "nesting" approach, in which a simplified model of the entire central nervous system (CNS) was used to examine the effects of the CSF surrounding the ventricular system (VS). This model provided time varying pressure data for the exits from the VS nested within it. The fastest flow was found in the cerebral aqueduct, where a maximum velocity of 11.38 mm/s was observed over five cycles. The maximum Reynolds number recorded during the simulation was 15 with an average Reynolds number of the order of 0.39, indicating that CSF motion is creeping flow in most of the computational domain and consequently will follow the geometry of the model. CSF pressure also varies with geometry with a maximum pressure drop of 1.14 Pa occurring through the cerebral aqueduct. CSF flow velocity is substantially slower in the areas that are furthest away from the inlets; in some areas flow is nearly stagnant.
Subject(s)
Cerebrospinal Fluid/physiology , Imaging, Three-Dimensional/methods , Models, Biological , Rheology/methods , Ventricular Function , Computer Simulation , HumansABSTRACT
The purpose of this research work was to develop a methodology to model arm movement in normal subjects and neurologically impaired individuals through the application of a statistical modelling method. Thirteen subjects with Parkinson's disease and 29 normal controls were recruited to participate in an arm motor task. An infrared optoelectronic kinematic movement analysis system was employed to record arm movement at 50 times per second. This study identified the modified extended Freundlich model as one that could be used to describe this task. Results showed that this model fit the data well and that it has a good correspondence between the observed and the predicted data. However, verification of the model showed that the residuals contained a sizeable autocorrelation factor. The Cochrane and Orcutt method was applied to remove this factor, which improved the fit of the model. Results showed that Parkinson's disease subjects had a higher autocorrelation coefficient than the normal subjects for this task. A positive correlation (r(s) = 0.72, p < 0.001) was found between the Langton-Hewer stage and the autocorrelation coefficient of PD subjects. This finding suggests that if autocorrelation is positively correlated with disease progression, clinicians in their clinical practice might use the autocorrelation value as a useful indicator to quantify the progression of a subjects' disease. Significant differences in model parameters were seen between normal and Parkinson's disease subjects. The use of such a model to represent and quantify movement patterns provides an important base for future study.