Correction: Luminescent Nd2S3 thin films: a new chemical vapour deposition route towards rare-earth sulphides.

Correction for 'Luminescent Nd2S3 thin films: a new chemical vapour deposition route towards rare-earth sulphides' by Stefan Cwik et al., Dalton Trans., 2019, 48, 2926-2938.

Luminescent Nd2S3 thin films: a new chemical vapour deposition route towards rare-earth sulphides.

Neodymium sulphide (Nd2S3) belongs to the exciting class of rare earth sulphides (RES) and is projected to have a serious potential in a wide spectrum of application either in pure form or as dopant. We demonstrate a facile and first growth of Nd2S3 thin films via metal-organic chemical vapour deposition (MOCVD) at moderate process conditions using two new Nd precursors, namely tris(N,N'-diisopropyl-2-dimethylamido-guanidinato)Nd(iii) and tris(N,N'-diisopropyl-acetamidinato)Nd(iii). The promising thermal properties and suitable reactivity of both Nd precursors towards elemental sulphur enabled the formation of high purity γ-Nd2S3. While the process temperature for film growth ranged from 400 °C to 600 °C, the films were crystalline above 500 °C. We also demonstrate that the as-deposited γ-Nd2S3 are luminescent, with the optical bandgap ranging from 2.3 eV to 2.5 eV. The process circumvents post-deposition treatments such as sulfurisation to fabricate the desired Nd2S3, which paves the way for large scale synthesis and also opens up new avenues for exploring the potential of this class of materials with properties for functional applications.

Unearthing [3-(Dimethylamino)propyl]aluminium(III) Complexes as Novel Atomic Layer Deposition (ALD) Precursors for Al2 O3 : Synthesis, Characterization and ALD Process Development.

Identification and synthesis of intramolecularly donor-stabilized aluminium(III) complexes, which contain a 3-(dimethylamino)propyl (DMP) ligand, as novel atomic layer deposition (ALD) precursors has enabled the development of new and promising ALD processes for Al2 O3 thin films at low temperatures. Key for this promising outcome is the nature of the ligand combination that leads to heteroleptic Al complexes encompassing optimal volatility, thermal stability and reactivity. The first ever example of the application of this family of Al precursors for ALD is reported here. The process shows typical ALD like growth characteristics yielding homogeneous, smooth and high purity Al2 O3 thin films that are comparable to Al2 O3 layers grown by well-established, but highly pyrophoric, trimethylaluminium (TMA)-based ALD processes. This is a significant development based on the fact that these compounds are non-pyrophoric in nature and therefore should be considered as an alternative to the industrial TMA-based Al2 O3 ALD process used in many technological fields of application.

Self-Assembly, Dynamics, and Polymorphism of hIAPP(20-29) Aggregates at Solid-Liquid Interfaces.

The misfolding and subsequent assembly of proteins and peptides into insoluble amyloid structures play important roles in the development of numerous diseases. The dynamics of self-assembly and the morphology of the resulting aggregates critically depend on various environmental factors and especially on the presence of interfaces. Here, we show in detail how the presence of surfaces with different physicochemical properties influences the assembly dynamics and especially the aggregate morphology of hIAPP(20-29), an amyloidogenic fragment of the peptide hormone human islet amyloid polypeptide (hIAPP), which is involved in the development of type 2 diabetes. Time-lapse atomic force microscopy is employed to study the assembly dynamics of hIAPP(20-29) and the morphology of the resulting aggregates in bulk solution as well as at hydrophilic and hydrophobic model surfaces. We find that the presence of hydrophilic mica surfaces promotes fibrillation when compared with the assembly in bulk solution and results in a more pronounced polymorphism. Three fibrillar species are found to coexist on the mica surface, that is, straight, coiled, and ribbon-like fibrils, whereas only the straight and coiled fibrils are observed in bulk solution after comparable incubation times. In addition, the straight and coiled fibrils assembled at the mica surface have significantly different dimensions compared with those assembled in bulk solution. The three fibrillar species found on the mica surface most likely form independently by lateral association of arbitrary numbers of protofibrils with about 2 nm height. On hydrophobic hydrocarbon surfaces, fibrillation is retarded but not completely suppressed, in contrast to previous observations for full-length hIAPP(1-37). Our results show that peptide-surface interactions may induce diverse, peptide-specific alterations of amyloid assembly dynamics and fibrillar polymorphism. They may therefore contribute to a deeper understanding of the molecular processes that govern amyloid aggregation at different surfaces.

Plasma-Enhanced Chemical Vapor Deposition (PE-CVD) yields better Hydrolytical Stability of Biocompatible SiOx Thin Films on Implant Alumina Ceramics compared to Rapid Thermal Evaporation Physical Vapor Deposition (PVD).

Densely sintered aluminum oxide (α-Al2O3) is chemically and biologically inert. To improve the interaction with biomolecules and cells, its surface has to be modified prior to use in biomedical applications. In this study, we compared two deposition techniques for adhesion promoting SiOx films to facilitate the coupling of stable organosilane monolayers on monolithic α-alumina; physical vapor deposition (PVD) by thermal evaporation and plasma enhanced chemical vapor deposition (PE-CVD). We also investigated the influence of etching on the formation of silanol surface groups using hydrogen peroxide and sulfuric acid solutions. The film characteristics, that is, surface morphology and surface chemistry, as well as the film stability and its adhesion properties under accelerated aging conditions were characterized by means of X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and tensile strength tests. Differences in surface functionalization were investigated via two model organosilanes as well as the cell-cytotoxicity and viability on murine fibroblasts and human mesenchymal stromal cells (hMSC). We found that both SiOx interfaces did not affect the cell viability of both cell types. No significant differences between both films with regard to their interfacial tensile strength were detected, although failure mode analyses revealed a higher interfacial stability of the PE-CVD films compared to the PVD films. Twenty-eight day exposure to simulated body fluid (SBF) at 37 °C revealed a partial delamination of the thermally deposited PVD films whereas the PE-CVD films stayed largely intact. SiOx layers deposited by both PVD and PE-CVD may thus serve as viable adhesion-promoters for subsequent organosilane coupling agent binding to α-alumina. However, PE-CVD appears to be favorable for long-term direct film exposure to aqueous solutions.

Influence of the liquid crystal behaviour on the Langmuir and Langmuir-Blodgett film supramolecular architecture of an ionic liquid crystal.

A new luminescent ionic liquid crystal, called Ipz-2, has been synthesised and its mesophase behaviour and also at the air-liquid interface has been studied and compared with Ipz, another ionic pyrazole derivative, with a similar molecular structure, previously studied. The X-ray diffraction pattern shows that Ipz-2 exhibits hexagonal columnar mesomorphism, while Ipz adopts lamellar mesophases. Langmuir films of both compounds are flat and homogeneous at large areas per molecule, but create different supramolecular structures under further compression. Ipz-2 Langmuir films have been transferred onto solid substrates, and Atomic Force Microscopy (AFM) images of the Langmuir-Blodgett films have shown that large columnar structures hundreds of nm in diameter are formed on top of the initial monolayer, in contrast with well-defined trilayer LB films obtained for Ipz. Our results show that Ipz-2 has a tendency to stack in columnar arrangements both in liquid crystalline bulk and in Langmuir and Langmuir-Blodgett films.

Air-water interfacial behavior of linear-dendritic block copolymers containing PEG and azobenzene chromophores.

Fabrication of Langmuir films at the air-water interface of four linear-dendritic block copolymers (LDBCs) is described. The LDBCs are composed of a linear hydrophilic chain of poly(ethylene glycol) (PEG) and the first four generations of hydrophobic aliphatic polyester dendrons functionalized at the periphery with cyanoazobenzene chromophores. Langmuir films of the LDBCs, coded as PEG-AZOn (n indicates the number of cyanoazobenzene units at the periphery of the dendritic block), have been characterized by a combination of surface pressure versus area per molecule isotherms, UV-vis reflection spectroscopy and Brewster angle microscopy. The observed PEG-AZOn Langmuir film behavior depends strongly on the hydrophilic/hydrophobic ratio. A typical transition, related to PEG chains desorption from the air-water interface into the water subphase is observed for all the LDBCs, except for PEG-AZO16. In addition, PEG-AZO2 and PEG-AZO4 show a second transition whose nature has been studied in detail. Azobenzene chromophore interactions have been shown to be relevant in the organization of PEG-AZOn (n=4, 8 and 16) Langmuir films. Moreover, for PEG-AZO16 the orientation of the azobenzene units has been determined, revealing the formation of a well organized structure of azobenzene moieties at the air-water interface.

Molecular arrangement in Langmuir and Langmuir-Blodgett films of a mesogenic bent-core carboxylic acid.

A different alternative to previous research on Langmuir and Langmuir-Blodgett (LB) films of bent-core liquid crystals is reported in this work. A bent-shaped molecule wearing a terminal carboxylic group has been used to obtain monomolecular films with their long molecular axis almost perpendicular to the aqueous surface. Langmuir films at the air-liquid interface (pH=9) have been characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. A condensed phase is reached at surface pressures up to 20 mN x m-1. In this condensed phase, molecules are packed forming H-aggregates with a well-defined molecular orientation. Langmuir films have been transferred onto quartz and silicon substrates and characterized by means of UV-vis spectroscopy and XRR. The transference is Z-type, with a constant deposition of the monolayers. The total LB monolayer film thickness is evaluated to be about 5.8 nm, which is in good agreement with the deduced orientation at the air-liquid interface as well as with the lamellar order observed within the solid obtained by cooling the sample from the mesophase.

The use of scanning polarization force microscopy to study the miscibility of a molecular wire candidate and an insulating fatty acid in mixed films.

Mixed films containing a conjugated "molecular wire" candidate and an "insulating" fatty acid have been prepared by the Langmuir-Blodgett technique. Specifically, this paper reports the fabrication of mixed films as well as miscibility studies of 4-[4-(4-hexyloxyphenylethynyl)phenylethynyl]benzoic acid (HBPEB) and docosanoic (or behenic) acid (BA). Surface pressure vs. area per molecule isotherms were recorded, with excess area and excess Gibbs energy of mixing calculated. Surface potential-area per molecule isotherms were also recorded for mixtures over the whole range of mole fractions, with negative deviations from the additivity rule revealing orientational changes induced in the HBPEB molecules. The Langmuir films were transferred onto solid supports and characterized by SPM techniques, with atomic force microscopy (AFM) revealing that well-ordered, defect-free films are obtained. The use of scanning polarization force microscopy (SPFM), which provides non-contact imaging based on differences in surface charge distribution, i.e., surface potential, provides complimentary information regarding distribution of the components within the mixed films. From the comprehensive miscibility study performed, which includes thermodynamic and imaging methods, it can be concluded that the wire-like molecule and the fatty acid are miscible over the 0-0.1 and 0.8-1 ranges of HBPEB mole fraction while phase separation occurs for HBPEB mole fractions over the 0.1-0.8 range.

Influence of the Hofmeister series of anions on the molecular organization of positively ionized monolayers of a viologen derivative.

The effects of the Hofmeister series of ions are ubiquitous in chemistry and biology. In this paper specific ion effects on the surface behavior of a viologen dication, namely 1,1(')-dioctadecyl-4,4(')-bipyridilium, are shown. Surface pressure and surface potential vs area isotherms were obtained on aqueous subphases containing potassium salts with several representative counterions in the Hofmeister series (C6H5O3-7, SO2 -4, HPO2-4, Cl-, Br-, NO-3, I-, and ClO-4). The parameters obtained from the compression isotherms (area per molecule, phase transitions, Young modulus, initial surface potential, and variation of the surface potential upon compression) are dependent on the nature of the counterion, indicating ion specificity. Aqueous subphases containing C6H5O3-7, SO2-4, and HPO2-4 anions yield more expanded viologen monolayers and these anions do not effectively penetrate into the monolayer. Brewster angle microscopy was used to map the different phases of the viologen monolayers at the air-water interface. The Langmuir films were also characterized by UV-vis spectroscopy, with quantitative analysis of the reflection spectra supporting an organizational model in which the viologen chromophore undergoes a gradual transition to a more vertical position with respect to the water surface upon compression. A comparison of the tilt angles of the viologen on the different subphases indicates that anions that can more easily penetrate in the monolayer permit the viologen moieties to adopt a slightly more vertical position with respect to the water surface.