ABSTRACT
The surface roughness of additively manufactured (AM) components can have deleterious effects on the properties of the final part, such as corrosion resistance and fatigue life. Modification of the surface finish or parts produced by AM processes, such as cold spray, through methods such as mass finishing, can help to mitigate some of these issues. In this work, the surface evolution of as-produced copper cold sprayed material consolidations was studied through mass finishing. Three different copper powders attained by different production methods and of different sizes were used as feedstock. The surface topography of the cold spray deposits was measured as a function of the mass finishing time for the three copper cold spray samples and analyzed in terms of relative area and complexity, revealing an inverse correlation relating material removal rate and hardness/strength of the cold sprayed deposits. The material removal rate was also affected by the quality of the cold spray deposition, as defined by deposition efficiency (DE). Large initial drops in relative area and complexity are also likely due to the removal of loosely bonded powders at the start of mass finishing. Based on this study, the cold spray parameters that affect the rate of mass finishing have been explored.
ABSTRACT
In this literature review, the antipathogenic properties and contact-mediated antibacterial and antiviral performance of copper cold spray surfaces are assessed and compared with alternative antimicrobial materials that are able to kill and/or inactivate infectious agents via direct contact. Discussion is also provided concerning the suitability of copper cold spray material consolidations as biocidal and viricidal surfaces that retain long-term functionality as a preventative measure against fomite transmission of pathogenic agents and hospital-acquired infections from contaminated high-touch surfaces. Numerable alternative antimicrobial coatings and surfaces that do not rely upon the oligodynamic action of copper are detailed. Given the ongoing need for recognition of said alternative antimicrobial materials by authoritative agencies, such as the U.S. Environmental Protection Agency, the relevant literature on non-copper-based antipathogenic coatings and surfaces are then described. Furthermore, a wide-ranging take on antipathogenic copper cold spray coatings are provided and consideration is given to the distinctive grain-boundary mediated copper ion diffusion pathways found in optimizable, highly deformed, copper cold spray material consolidations that enable pathogen inactivation on surfaces from direct contact. To conclude this literature review, analysis of how copper cold spray coatings can be employed as a preventative measure against COVID-19 was also presented in light of on-going debates surrounding SARS-CoV-2's non-primary, but non-negligible, secondary transmission pathway, and also presented in conjunction with the inevitability that future pathogens, which will be responsible for forthcoming global pandemics, may spread even more readily via fomite pathways too.