Urinary calculi in larvae of striped trumpeter, Latris lineata.

Urinary calculi are observed in some cultured marine fish larvae and may negatively impact larval health and survival. This study assessed urinary calculi in striped trumpeter Latris lineata larvae from hatching to 28 days post-hatching (dph). The prevalence of urinary calculi was variable over time and ranged from 15% to 50%, whereas the average size of calculi increased with larval age. Urinary calculi were semi-translucent, light cream to white colour with irregular morphology and a uniform internal structure. The calculi resulted in pressure atrophy causing a distended epithelium of the urinary bladder of fish with calculi. The calculi were predominantly formed of calcium hydrogen phosphate (CaHPO4 ). Routine assessment of the prevalence of urinary calculi in marine fish larvae is recommended, along with other parameters, to monitor larval quality and inform hatchery management actions.

Novel Methods to Manipulate Autolysis in Sparkling Wine: Effects on Yeast.

Sparkling wine made by the traditional method (Méthode Traditionelle) develops a distinct and desirable flavour and aroma profile attributed to proteolytic processes during prolonged ageing on lees. Microwave, ultrasound and addition of ß-glucanase enzymes were applied to accelerate the disruption of Saccharomyces cerevisiae, and added to the tirage solution for secondary fermentation in traditional sparkling winemaking. Scanning electron microscopy and flow cytometry analyses were used to observe and describe yeast whole-cell anatomy, and cell integrity and structure via propidium iodide (PI) permeability after 6-, 12- and 18-months post-tirage. Treatments applied produced features on lees that were distinct from that of the untreated control yeast. Whilst control yeast displayed budding cells (growth features) with smooth, cavitated and flat external cell appearances; microwave treated yeast cells exhibited modifications like 'doughnut' shapes immediately after treatment (time 0). Similar 'doughnut'-shaped and 'pitted/porous' cell features were observed on progressively older lees from the control. Flow cytometry was used to discriminate yeast populations; features consistent with cell disruption were observed in the microwave, ultrasound and enzyme treatments, as evidenced by up to 4-fold increase in PI signal in the microwave treatment. Forward and side scatter signals reflected changes in size and structure of yeast cells, in all treatments applied. When flow cytometry was interpreted alongside the scanning electron microscopy images, bimodal populations of yeast cells with low and high PI intensities were revealed and distinctive 'doughnut'-shaped cell features observed in association with the microwave treatment only at tirage, that were not observed until 12 months wine ageing in older lees from the control. This work offers both a rapid approach to visualise alterations to yeast cell surfaces and a better understanding of the mechanisms of yeast lysis. Microwave, ultrasound or ß-glucanase enzymes are tools that could potentially initiate the release of yeast cell compounds into wine. Further investigation into the impact of such treatments on the flavour and aroma profiles of the wines through sensory evaluation is warranted.

Kimberlite genesis from a common carbonate-rich primary melt modified by lithospheric mantle assimilation.

Quantifying the compositional evolution of mantle-derived melts from source to surface is fundamental for constraining the nature of primary melts and deep Earth composition. Despite abundant evidence for interaction between carbonate-rich melts, including diamondiferous kimberlites, and mantle wall rocks en route to surface, the effects of this interaction on melt compositions are poorly constrained. Here, we demonstrate a robust linear correlation between the Mg/Si ratios of kimberlites and their entrained mantle components and between Mg/Fe ratios of mantle-derived olivine cores and magmatic olivine rims in kimberlites worldwide. Combined with numerical modeling, these findings indicate that kimberlite melts with highly variable composition were broadly similar before lithosphere assimilation. This implies that kimberlites worldwide originated by partial melting of compositionally similar convective mantle sources under comparable physical conditions. We conclude that mantle assimilation markedly alters the major element composition of carbonate-rich melts and is a major process in the evolution of mantle-derived magmas.

Multipoint Background Analysis: Gaining Precision and Accuracy in Microprobe Trace Element Analysis.

Electron microprobe trace element analysis is a significant challenge. Due to the low net intensity of peak measurements, the accuracy and precision of such analyses relies critically on background measurements, and on the accuracy of any pertinent peak interference corrections. A linear regression between two points selected at appropriate background positions is a classical approach for electron probe microanalysis (EPMA). However, this approach neglects the accurate assessment of background curvature (exponential or polynomial), and the presence of background interferences, a hole in the background, or an absorption edge can dramatically affect the results if underestimated or ignored. The acquisition of a quantitative wavelength-dispersive spectrometry (WDS) scan over the spectral region of interest remains a reasonable option to determine the background intensity and curvature from a fitted regression of background portions of the scan, but this technique can be time consuming and retains an element of subjectivity, as the analyst has to select areas in the scan which appear to represent background. This paper presents a new multi-point background (MPB) method whereby the background intensity is determined from up to 24 background measurements from wavelength positions on either side of analytical lines. This method improves the accuracy and precision of trace element analysis in a complex matrix through careful regression of the background shape, and can be used to characterize the background over a large spectral region covering several elements to be analyzed. The overall efficiency improves as systematic WDS scanning is not required to assess background interferences. The method is less subjective compared to methods that rely on WDS scanning, including selection of two interpolation points based on WDS scans, because "true" backgrounds are selected through an exclusion method of possible erroneous backgrounds. The first validation of the MPB method involves blank testing to ensure the method can accurately measure the absence of an element. The second validation involves the analysis of U-Th-Pb in several monazite reference materials of known isotopic age. The impetus for the MPB method came from efforts to refine EPMA monazite U-Th-Pb dating, where it was recognized that background errors resulting from interference or strong background curvature could result in errors of several tens of millions of years on the calculated date. Results obtained on monazite reference materials using two different microprobes, a Cameca SX-100 Ultrachron and a JEOL JXA-8230, yield excellent agreement with ages obtained by isotopic methods (Thermal Ionization Mass Spectrometry [TIMS], Sensitive High-Resolution Ion MicroProbe [SHRIMP], or Secondary Ion Mass Spectrometry [SIMS]). Finally, the MPB method can be used to model the background over a large spectrometer range to improve the accuracy of background measurement of minor and trace elements acquired on a same spectrometer, a method called the shared background measurement. This latter significantly improves the accuracy of minor and trace element analysis in complex matrices, as demonstrated by the analysis of Rare Earth Elements (REE) in REE-silicates and phosphates and of trace elements in scheelite.

Intraoperative performance and ultrastructural integrity of human capsulotomies created by the improved precision pulse capsulotomy device.

PURPOSE: To investigate the intraoperative performance and the ultrastructural features of anterior capsulotomy performed with the improved Zepto precision pulse capsulotomy (PPC) device. SETTING: Launceston Eye Institute, Launceston, Tasmania, Australia. DESIGN: Prospective, consecutive case series. METHODS: Intraoperative observation of performance and complications were made on consecutive eyes having capsulotomies with the improved PPC device. The capsulotomy specimens were examined under scanning electron microscope and compared with manual continuous curvilinear capsulorhexis and femtosecond laser-assisted cataract surgery specimens. RESULTS: The study comprised 52 eyes. Intended capsulotomy occurred in 50 eyes with 2 device failures. Complete free-floating capsulotomies were achieved in 48 eyes (96%). Anterior capsule tears occurred in 2 eyes (4%). CONCLUSIONS: The ability of the PPC device to create complete free-floating capsulotomies improved; however, the radial tear rate remained high. The ultrastructural features in ex vivo human capsulotomy specimens still showed areas of irregular capsule margin with frayed edges.

Ultrastructural Integrity of Human Capsulotomies Created by a Thermal Device.

PURPOSE: To investigate the ultrastructural features of anterior capsulotomy performed with a thermal device, the precision pulse capsulotomy (PPC). DESIGN: Prospective, multicenter case series. PARTICIPANTS: Consecutive patients undergoing capsulotomy with the PPC device. METHODS: Prospective study of patients undergoing capsulotomy with the PPC by 2 surgeons, followed up by routine phacoemulsification cataract surgery, was undertaken. All capsulotomy specimens were collected for scanning electron microscopy (SEM). Observations were made regarding uniformity of the capsular edge and the presence of irregularities that may compromise integrity. Comparisons were made with manual continuous curvilinear capsulorrhexis. MAIN OUTCOME MEASURES: Ultrastructural features of PPC and presence of irregularities. RESULTS: Frayed appearance of the anterior capsule edge was noted in postoperative visits under slit-lamp examination. Scanning electron microscopy sampling showed a generally uniform rolled capsular edge, but interspersed with areas of irregularity with frayed appearance at the capsule margin. CONCLUSIONS: The PPC device is capable of creating reproducible, central, and precise circular capsulotomy. The ultrastructural features in ex vivo human capsulotomy specimens generally show eversion of the capsulotomy edge, but in some cases, this was accompanied by areas of irregular capsule margin with frayed edges, likely caused by dissipated thermal energy. The postoperative appearance and SEM features warrant further assessment of the PPC integrity and clinical correlation.

Anterior capsulotomy integrity after femtosecond laser-assisted cataract surgery.

OBJECTIVE: To compare the incidence of anterior capsular tears after femtosecond laser-assisted cataract surgery (FLACS) versus phacoemulsification cataract surgery (PCS) and to assess the ultrastructural features of anterior capsulotomy specimens (FLACS and PCS) using electron microscopy. DESIGN: Prospective, multicenter, comparative cohort case series. PARTICIPANTS: Consecutive patients undergoing FLACS or PCS. METHODS: A prospective cohort study of all patients (n = 1626) undergoing FLACS or PCS by 2 surgeons from centers A and B was undertaken to compare the incidence of anterior capsule tears. Anterior lens capsules were collected by 4 surgeons from centers A, B, C, and D using 3 different commercially available femtosecond platforms, each with latest version upgrades. Lens capsule tissue was prepared for scanning electron microscopy (SEM) using a total of 10 samples for patients undergoing PCS, and 40 samples for patients undergoing FLACS. MAIN OUTCOME MEASURES: Incidence of anterior capsule tear and comparative ultrastructural features of capsular samples from both PCS and FLACS cases. RESULTS: There was a significantly increased rate of anterior capsule tears in the FLACS group (15/804 [1.87%]) when compared with the PCS group (1/822 [0.12%]; P = 0.0002, Fisher exact test). In 7 cases, the anterior capsule tear extended to the posterior capsule. Because all cases had occurred in complete capsulotomy, the integrity of the anterior capsule was questioned in the FLACS group. Subsequent SEM sampling showed irregularity at the capsule margin, as well as multiple apparently misplaced laser pits in normal parts of the tissue. Aberrant pits were approximately 2 to 4 µm apart and occurred at a range of 10 to 100 µm radially from the capsule edge. CONCLUSIONS: Laser anterior capsulotomy integrity seems to be compromised by postage-stamp perforations and additional aberrant pulses, possibly because of fixational eye movements. This can lead to an increased rate of anterior capsule tears, and extra care should be taken during surgery after femtosecond laser pretreatment has been performed. A learning curve may account for some of the increased complication rate with FLACS. However, the SEM features raise safety concerns for capsular integrity after FLACS and warrant further investigation.