Effects of rosmarinic acid esters on the oxidation kinetic of organogel and emulsion gel.

Rosmarinic acid was esterified with ethanol, butanol, and hexanol to produce ethyl rosmarinate, butyl rosmarinate, and hexyl rosmarinate, respectively. The antioxidant capacities of the rosmarinic acid esters were evaluated in linseed oil, organogel, and emulsion gel during the initiation and propagation phases of peroxidation. Organogel control sample showed higher induction period and propagation period than those of linseed oil and emulsion gel control samples. Among linseed oil and organogel samples containing antioxidants, samples containing rosmarinic acid exhibited the highest antioxidant activity during the initiation phase, while rosemary extract containing butyl rosmarinate showed the highest antioxidant activity in the propagation phase. In emulsion gel, rosemary extract containing butyl rosmarinate showed higher antioxidant activity than those of rosemary extract containing ethyl rosmarinate or hexyl rosmarinate in the initiation and propagation phases. In addition, the investigated antioxidants showed lower efficiency in organogel and emulsion gel samples than those in linseed oil samples.

Application of electrospinning to fabricate phycocyanin- and Spirulina extract-loaded gliadin fibers for active food packaging.

This study explored the active food packaging application of phycocyanin- and Spirulina extract-loaded gliadin electrospun fibers (GPhy and GSPE5%). SEM findings confirmed that the morphology of fibers was tubular, showing the GPhy and GSPE5% as the optimum fibers. The loading efficiencies of GPhy and GSPE5% were also around 90%, which proved the well-incorporated compounds within the fibers. Simulation results of α-gliadin dissolved in acetic acid illustrated the denaturation of the protein. FTIR and TGA confirmed that after electrospinning the chemical/structural changes and enhanced thermostabilities occurred, respectively. Antibacterial and antioxidant tests detected higher bactericidal and antioxidative effects of GSPE5% than GPhy. In the application part, it was found that GPhy and GSPE5% were able to decrease PV and TBA values as the indications of walnut kernels' protection from lipid oxidation. This work shows a facile and an efficient way to fabricate active food packaging materials using electrospinning and natural compounds.

Enhancing the accuracy, speed, and efficiency of kafirin-PEO electrospun bio-nanocomposite pH indicators with red beetroot extract using image processing.

Intelligent electrospun pH indicators were produced from bio-nanocomposite kafirin-polyethylene oxide (PEO) containing red beetroot extract. The aim was to evaluate the performance and stability of the electrospun pH indicators via image processing. Red beetroot extract was added to a mixture of kafirin and PEO at various concentrations. The mixtures were electrospun, and infrared Fourier transform spectroscopy confirmed the presence of kafirin, PEO, and red beetroot extract in the resulting pH indicator. The results showed that the pH indicators had high stability and reversibility at different temperatures, pHs, and environmental conditions. The results showed that the color of the indicators was significantly reversible after pH changes, with highly desirable reversibility observed at pH values of 1, 3, 4, 5, 7, 9, and 10. The findings proved that the red beetroot extract loaded bio-nanocomposite pH indicator accompanied by evaluation of color characteristics through image processing technique, can serve as a time-efficient, accurate tool for detecting and tracking pH changes caused by food spoilage.

Bilayer coatings for extension of the shelf life of fish fillets: Incorporating seaweed sulfated polysaccharides in chitosan-alginate LbL structures.

The aim of this study was to develop a new active coating of layer-by-layer (LbL) structure composed of alginate (as polyanions) and chitosan (as a polycation) containing sulfated polysaccharide (fucoidan) from Sargassum angustifolium, to protect rainbow trout fillets during refrigerated storage. Chitosan and alginate do not combine with each other as a homogeneous solution, so they are suitable for multilayer coatings. The results demonstrated that coating samples with chitosan and fucoidan significantly improved the quality of fish fillets and extended their shelf life from 6 to 16 days. The chemical values (TBARS and TVB-N) and bacterial growth (total viable count (TVC), total psychrophilic count (PTC), and lactic acid bacteria (LAB)) indicated lower levels in the LbL coating samples containing fucoidan compared to the alginate and control samples. Among the different coating samples, the LbL coating with fucoidan (AChF1) exhibited lower weight loss, improved chromaticity (L*, a*, and b*), and minimal changes in mechanical and sensory evaluations. Based on the findings, AChF1 was the most effective treatment for increasing the shelf life of rainbow trout fillets during refrigerated storage. Therefore, it has potential applications in the food packaging industry.

Potential prebiotic and antibacterial activities of fucoidan from Laminaria japonica.

Fucoidan from Laminaria japonica became sterilized with an autoclave and ultraviolet (UV) radiation. Potential prebiotic and antibacterial activities of sterilized fucoidans (SF) were the subject of investigation. Molecular weight, monosaccharide composition, FTIR, and NMR spectra of SF underwent evaluations to elucidate the relationship between the structure and activities of SF. The growth of Lactobacillus rhamnosus GG and L. acidophilus with autoclave sterilized fucoidan (ASF) and the growth of L. plantarum, L. gasseri, L. paracasei, and L. reuteri with UV sterilized fucoidan (USF) increased significantly. Also, fucoidan was vastly more effective than fructooligosaccharides in improving the growth of L. gasseri, L. reuteri, and L. paracasei. The growth of Escherichia coli and Bacillus cereus decreased at each SF concentration. ASF was more effective against E. coli, B. cereus, and Staphylococcus aureus than the USF efficiency. However, USF exhibited more inhibitory effects on the growth of Enterobacteriaceae compared to the ASF efficiency. When comparing the ASF and USF, autoclave caused a considerable decrease in molecular weight and uronic acid content, increased fucose and galactose, and made no significant changes in NMR spectra. Fucoidan effectively promoted probiotic bacterial growth and reduced pathogenic outbreaks in the medium. Therefore, it can occur as a new algal prebiotic and antibacterial agent.

Alginate/whey protein isolate-based emulgel as an alternative margarine replacer in processed cheese: Impact on rheological, mechanical, nutritional, and sensory characteristics.

Effects of partial or full replacement of margarine by alginate/whey protein isolate-based olive oil emulgel (E) on nutritional, physicochemical, mechanical, and rheological properties of processed cheese (PC) were investigated in this work. All formulated samples had the same amount of total fat, dry matter, and pH. According to the results of the fatty acids profile, the processed cheese sample in which the margarine was fully replaced by the emulgel (EPC100) had the highest (49.84%) oleic acid content and showed a reduction of 23.7% in saturated fatty acids compared with the control sample (EPC0: formulated just with margarine). EPC0 had the highest hardness among various cheese samples, which was also confirmed by its compact microstructure. Dynamic oscillatory measurements revealed that EPC100 had the highest crossover strain (or resistance to deformation). The high rigidity of this sample was related to the 3-dimensional structure of emulgel. According to the creep test results, EPC100 showed the lowest relative recovery (flowability). A high temperature-dependency of viscoelastic moduli was observed in EPC0 at 42°C. No significant differences were observed between color attributes and sensory properties of various cheese samples. Alginate/WPI-based olive oil emulgel can be considered as a healthy margarine replacer in processed cheese.

Antioxidant potency and inhibitory mechanism of curcumin and its derivatives in oleogel and emulgel produced by linseed oil.

The antioxidant activity of curcumin and curcumin esters was investigated in oleogel and emulgel produced by linseed oil. In the initiation phase, curcumin acetate at 1.086 mM concentration showed the highest antioxidant activity in linseed oil, while curcumin at 2.172 mM concentration showed the highest antioxidant activity in oleogel. In the propagation phase, curcumin and curcumin esters exhibited higher efficiency in linseed oil samples than those of oleogel samples. In the initiation phase, curcumin hexanoate showed higher antioxidant activity than curcumin acetate and curcumin butyrate, while curcumin hexanoate showed lower efficiency than curcumin acetate and curcumin butyrate in the propagation phase. Investigating the mechanism of action of curcumin and curcumin esters in oleogel and emulgel showed that in addition to inhibiting peroxyl radicals, curcumin and curcumin esters were likely to pro-oxidatively attack hydroperoxides. Also, curcumin and curcumin esters radicals were likely to attack lipid substrates in these systems.

Exploiting Apical Sodium-Dependent Bile Acid Transporter (ASBT)-Mediated Endocytosis with Multi-Functional Deoxycholic Acid Grafted Alginate Amide Nanoparticles as an Oral Insulin Delivery System.

OBJECTIVE: Oral administration of insulin is a potential candidate for managing diabetes. However, it is obstructed by the gastrointestinal tract barriers resulting in negligible oral bioavailability. METHODS: This investigation presents a novel nanocarrier platform designed to address these challenges. In this regard, the process involved amination of sodium alginate by ethylene diamine, followed by its conjugation with deoxycholic acid. RESULTS: The resulting DCA@Alg@INS nanocarrier revealed a significantly high insulin loading content of 63.6 ± 1.03% and encapsulation efficiency of 87.6 ± 3.84%, with a particle size of 206 nm and zeta potentials of -3 mV. In vitro studies showed sustained and pH-dependent release profiles of insulin from nanoparticles. In vitro cellular studies, confocal laser scanning microscopy and flow cytometry analysis confirmed the successful attachment and internalization of DCA@Alg@INS nanoparticles in Caco-2 cells. Furthermore, the DCA@Alg@INS demonstrated a superior capacity for cellular uptake and permeability coefficient relative to the insulin solution, exhibiting sixfold and 4.94-fold enhancement, respectively. According to the uptake mechanism studies, the results indicated that DCA@Alg@INS was mostly transported through an energy-dependent active pathway since the uptake of DCA@Alg@INS by cells was significantly reduced in the presence of NaN3 by ~ 92% and at a low temperature of 4°C by ~ 94%. CONCLUSIONS: Given the significance of administering insulin through oral route, deoxycholic acid-modified alginate nanoparticles present a viable option to surmount various obstacles presented by the gastrointestinal.

Effects of sesame dehulling on physicochemical and sensorial properties of its oil.

At present, sesame oil is extracted from un-hulled white sesame seeds by using cold press lubrication machines in local stores in Iran. This study aimed to evaluate the physicochemical properties and safety parameters of the hulled and un-hulled white sesame oils. The fatty acid composition, antioxidant activity, oxalates content, total phenolic content, carotenoid content, acid value, peroxide value, p-anisidine value, value total oxidation value (TOTOX), aflatoxins and pesticides residue, smoke point, color, relative density, and refractive index of oil sample were examined immediately after extracting the oil. The peroxide, p-anisidine, and TOTOX value of the hulled and un-hulled sesame oil samples were also examined periodically. After 7 months, the quality parameters were high and the oil samples were not consumable. Linoleic and oleic acids were the predominant fatty acids in the hulled and un-hulled sesame oils. The results of this study showed that the oil extracted from raw un-hulled sesame had a lower initial quality than hulled sesame oil and was oxidized more rapidly than it during the storage period. Virgin oils contained impurities acting like prooxidants and reduced their stability and shelf life. In addition, the un-hulled sesame oil contained higher amounts of antinutrient compounds (e.g., oxalate and pesticide residues) than the hulled sesame oil. Aflatoxin was not detected in our oil samples.

Fabrication and characterization of bio-nanocomposites based on kafirin and polyethylene oxide as auxiliary polymer: process optimization, rheological, morphological and thermal properties.

The aim of this research was to compare the effects of various solvents on producing kafirin/polyethylene oxide (PEO) bio-nanocomposites by the technique of electrospinning. Different concentrations of kafirin (15, 20, 25, 30 and 40% w/v) and PEO (2, 4 and 6% w/v) were electrospun. For the dissolution and electrospinning of these two biopolymers, different solvents were used comparatively, i.e. distilled water, ethanol (70%), acetic acid (40%), 2-Butanol and glacial acetic acid. An evaluation of flow behavior showed that kafirin and PEO had Newtonian and pseudoplastic behaviors, respectively. A mixture of these two polymers demonstrated quasi-Newtonian and shear-independent behaviors in a low shear rate range, which positively affected the electrospinning process. SEM images showed that the best concentrations of kafirin and PEO were 25 and 2%, respectively, for producing nanofibers with uniform structures. Fourier-transform infrared spectroscopy (FTIR) indicated the presence of kafirin and PEO in the bio-nanocomposite after electrospinning. The FTIR proved that these two polymers had no chemical interactions with each other. Overall, the results showed that selecting an appropriate solvent and a suitable auxiliary polymer could have significant roles in producing biodegradable kafirin nanofibers.

The effect of celery (Apium graveolens) powder on cardiometabolic factors in overweight/obese individuals with type 2 diabetes mellitus: A pilot randomized, double-blinded, placebo-controlled clinical trial.

Celery (Apium graveolens) was shown to have beneficial effects on cardiometabolic factors in animal models. As the progression of type 2 diabetes mellitus (T2DM) adversely affects cardiometabolic factors, we aimed to assess the effects of celery powder on glycemic and anthropometric indices, lipid profile, liver function, oxidative stress, and blood pressure of individuals with T2DM. In a pilot randomized, double-blinded, placebo-controlled clinical trial, 50 eligible adults with T2DM were randomly divided into two groups of intervention and control to consume either 750 mg of celery powder (obtained from fresh celery) or placebo along with a low-calorie diet for 12 weeks, respectively. Dietary intake, physical activity, and cardiometabolic factors were assessed before and at the end of the study. Thirty-six patients finished the study (18 in each group). Consumption of celery powder significantly reduced body fat percentage (p = .021). Between-group analysis for changes in cardiometabolic factors did not show significant differences. Although malondialdehyde was reduced in the intervention group and increased in the control group, between-group changes were not significant. Although the insulin-level change was statistically insignificant, a clinical improvement was observed in the intervention group. A 750-mg daily supplementation of celery powder for 12 weeks did not improve the cardiometabolic factors of patients with T2DM. Further studies are suggested.

Designing ultra-stable linseed oil-in-water Mickering emulsions using whey protein isolate cold-set microgels containing marjoram aqueous extract: Effect of pH and extract on rheological, physical, and chemical properties.

In this study, whey protein isolate (WPI) cold-set microgels containing marjoram (Origanum majorana) aqueous extract (MAE) were prepared at different pHs (4.0, 5.0, and 6.0). After characterization, the microgel dispersion was used to stabilize linseed oil-in-water Mickering emulsions (MEs). The resultant MEs were then characterized in terms of physicochemical and rheological properties under the effect of pH and MAE addition. The morphology, particle size, zeta potential, and interfacial tension of microgels were affected by pH and MAE. XRD patterns showed the amorphous structure. Microgel-stabilized MEs did not reveal any significant sign of instability under gravity during 6 months of storage. All MEs had dominant elastic character. Despite the lowest zeta potential values, MEs prepared at pH 4 showed the highest physical stability against gravity but the lowest centrifugal stability against oiling off, which indicated that both viscous and elastic components are required for MEs stability. This sample had the highest apparent viscosity and the strongest viscoelastic properties. Rheological data were best fitted with Herschel-Bulkley and Power Law models. An increase in pH and presence of MAE improved the oxidative stability of MEs. The results of this study showed that WPI microgels are appropriate candidate for long-term stabilization of linseed oil-in-water MEs. The presence of MAE is useful in designing special emulsions in which the aqueous phase is partially replaced by the aqueous extract of medicinal plants.

Development and characterization of antimicrobial alginate hydrogel beads filled with cinnamon essential oil nanoemulsion.

The aim of the present study was to investigate the characteristics of alginate beads filled with cinnamon essential oil nanoemulsions (CEONs). The influence of the alginate and CaCl2 concentrations on their physical, antimicrobial and antioxidant properties was studied. The droplet size of CEON was 146.20 ± 39.28 nm and the zeta potential was -33.8 ± 0.72 mV demonstrating proper nanoemulsions stability. Decreasing the alginate and CaCl2 concentrations resulted in higher EOs release due to the increased pore size of the alginate beads. The scavenging activity of DPPH of beads was found to be dependent on the alginate and calcium ion concentrations which affected the pore size of the fabricated beads. The FT-IR results declared the new bands in the spectra of filled hydrogel beads, which verified the encapsulation of EOs in the beads. The surface morphology of beads was studied using SEM images which showed the spherical shape and porous structure of alginate beads. In addition, the alginate beads filled with CEO nanoemulsion demonstrated strong antibacterial activity.

Enhancing phycocyanin solubility via complexation with fucoidan or κ-carrageenan and improving phycocyanin color stability by encapsulation in alginate-pregelatinized corn starch composite gel beads.

Phycocyanin (PC), as a pigment-protein complex, aggregates and precipitates in acidic environments. In this context, complex formation with anionic polysaccharides is a strategy to enhance protein solubility. Besides, acidic conditions negatively affect the inherent blue color of PC, which can be prevented by encapsulation. Thereupon, in the present study, two different biopolymer-based systems, namely complexes and hydrogel beads, were prepared to increase PC solubility and its color stability under acidic conditions, respectively. Fucoidan and κ-carrageenan (KC) were separately utilized to make a complex with PC. Calcium alginate-pregelatinized corn starch (PCS) composite gel beads were used to encapsulate PC. The prepared samples were added into model systems simulating acidic conditions and then characterized during storage at 4 and 25 °C under dark conditions. Appropriate colloidal stabilities were observed for fucoidan/PC and KC/PC model systems. The color of the samples remained stable at 4 °C. As well, the bead carriers (i.e. alginate-PCS) properly protected PC against low pH conditions over time at 4 °C. Thereupon, the blue color of the beads satisfactorily remained stable at this temperature. The findings showed that complexation with fucoidan or KC and encapsulation in mixed hydrogel beads are promising routes for improving PC solubility and its color stability, respectively.

Comparison of the antioxidant capacity of sesamol esters in gelled emulsion and non-gelled emulsion.

The antioxidant capacity of sesamol esters in gelled emulsion was investigated in comparison with non-gelled emulsion to assess the role of mass transfer on their antioxidant capacity. Initiation phase and propagation phase kinetic parameters of peroxidation was calculated using a sigmoidal model. Sesamol esters showed higher antioxidant activity than sesamol in gelled emulsion and non-gelled emulsion. Sesamyl acetate, sesamyl butyrate, and sesamyl hexanoate had no synergistic effect with sesamol in gelled emulsion, while in non-gelled emulsion sesamyl butyrate exhibited a slight synergistic effect with sesamol. The antioxidant activity of sesamyl acetate and sesamyl hexanoate in non-gelled emulsion samples were higher than those of gelled emulsion samples, while sesamyl butyrate exhibited higher antioxidant activity in gelled emulsion than that of non-gelled emulsion. The cut-off effect hypothesis was observed in gelled emulsion, while this hypothesis was disappeared in non-gelled emulsion. During propagation phase, sesamol esters remained active and exhibited inhibitory effect.

Studying structural and rheological properties of alginate-whey protein isolate cold-set hybrid emulgels at various pH levels.

Effects of different pH values (4-7) and whey protein isolate (WPI) concentrations (0.5-1.5%) were evaluated on physical, mechanical, and rheological properties of cold-set alginate-based soybean oil hybrid emulgels. The pH value changes were more effective than WPI concentration changes on emulgel properties. According to syneresis and texture profile analysis results, 1% WPI was selected as the optimum concentration. The XRD analysis showed that calcium alginate (CA) emulgel at pH 6 had a different peak at 2θ of 14.8°, likely indicating the highest amount of ion-bridging and maximum number of junction zones. The homogeneity of CA and CA + WPI emulgels (determined by image entropy analysis) decreased by pH reduction from 7 to 4, which can be related to acid-induced intermolecular interactions between alginate chains. The rheological properties of CA and CA + WPI emulgels revealed predominant elastic character (G' > G'') at different pH values. Creep test results showed that the relative recovery of emulgel prepared at pH 7 and 5 was 18.10 and 63.83%, respectively, suggesting pH reduction contributed to increase in the elastic component of material. The findings of this study can be applied for developing structured cold-set emulgels as solid fat replacers in meat and dairy products.

Recent Trends in Improving the Oxidative Stability of Oil-Based Food Products by Inhibiting Oxidation at the Interfacial Region.

In recent years, new approaches have been developed to limit the oxidation of oil-based food products by inhibiting peroxidation at the interfacial region. This review article describes and discusses these particular approaches. In bulk oils, modifying the polarity of antioxidants by chemical methods (e.g., esterifying antioxidants with fatty alcohol or fatty acids) and combining antioxidants with surfactants with low hydrophilic-lipophilic balance value (e.g., lecithin and polyglycerol polyricinoleate) can be effective strategies for inhibiting peroxidation. Compared to monolayer emulsions, a thick interfacial layer in multilayer emulsions and Pickering emulsions can act as a physical barrier. Meanwhile, high viscosity of the water phase in emulsion gels tends to hinder the diffusion of pro-oxidants into the interfacial region. Furthermore, applying surface-active substances with antioxidant properties (such as proteins, peptides, polysaccharides, and complexes of protein-polysaccharide, protein-polyphenol, protein-saponin, and protein-polysaccharide-polyphenol) that adsorb at the interfacial area is another novel method for enhancing oil-in-water emulsion oxidative stability. Furthermore, localizing antioxidants at the interfacial region through lipophilization of hydrophilic antioxidants, conjugating antioxidants with surfactants, or entrapping antioxidants into Pickering particles can be considered new strategies for reducing the emulsion peroxidation.

The effects of Shirazi thyme (Zataria multiflora) oil nanoemulsion on the quality of shrimp (Litopenaeus vannamei) during refrigerated storage.

The effects of carboxymethyl cellulose (CMC) coating incorporated with Shirazi thyme (Zataria multiflora) oil nano emulsion (SNE), in different concentrations (10, 20, and 30 mg/ml), on the melanosis and the quality of Pacific white shrimp (Litopenaeus vannamei) was investigated during 10 days in refrigerated temperature (4 ± 0.5 °C). The results showed that incorporating SNE into CMC could significantly (P < 0.05) improve the microbial and lipid oxidation quality of the shrimp. During storage, the incremewnt of total volatile basic-nitrogen and trimethylamine in the SNEs-treated groups were lower than that of the other groups (P < 0.05). Also, the application of SNEs improved the textural, melanosis, and sensory acceptability of the coated shrimps. However, treating the shrimp with SNE in 30 mg/ml concentration caused an increase in the a* and b* values of samples and a decrease in the acceptability of this group. Hence, the SNE incorporation at lower concentrations (10, 20 mg/ml) into CMC coating could be useful in extending the shelf life of the shrimp during refrigerated storage and could be a substitute for sodium metabisulphite.

Comparing the antioxidant activity of gallic acid and its alkyl esters in emulsion gel and non-gelled emulsion.

In this study, antioxidant capacity of gallic acid and its alkyl esters in emulsion gel was compared with non-gelled emulsion to determine the role of mass transport on their efficiency. Lauryl gallate exhibited higher antioxidant activity than gallic acid and ethyl gallate in emulsion gel and non-gelled emulsion. In emulsion gel, the synergistic effects in the initiation stage for gallic acid + ethyl gallate, gallic acid + lauryl gallate, and ethyl gallate + lauryl gallate were 78.28 %, 68.46 %, and 60.04 %, respectively. In non-gelled emulsion, the synergistic effects were 52.78 %, 39.02 %, and 22.30 %, respectively. In both emulsion gel and non-gelled emulsion, the longest induction period and propagation period was observed in samples containing gallic acid + lauryl gallate. The effectiveness of antioxidants in emulsion gel was lower than non-gelled emulsion. This reduction in antioxidant activity can be due to the limited ability of antioxidants to be transferred to the interfacial area.

Integration of physicochemical, molecular dynamics, and in vitro evaluation of electrosprayed γ-oryzanol-loaded gliadin nanoparticles.

Electrospraying is a technique to improve the application and stability of bioactive compounds in food. Here, electrospraying was applied to fabricate gliadin particles incorporated γ-oryzanol. The round particles were obtained, with an average diameter of 481.56 ± 283.74 nm, from scanning electron microscopy. Simulations demonstrated how γ-oryzanol-loaded gliadin particles were unfolded in acetic acid and culminated in their globular shape under an electric field. The results also revealed that γ-oryzanol was present in gliadin particles. Moreover, there was a successful formation of particles with a homogeneous distribution and an enhanced thermostabilization of γ-oryzanol. In food simulants, γ-oryzanol demonstrated an initial burst release, followed by a subsequent, slower release that occurred gradually. Finally, MTT assays showed concentration- and time-dependent inhibitions of γ-oryzanol-loaded gliadin particles on HT-29 cells, with IC50 values of 0.47 and 0.40 mg/mL for 24 and 48 h, respectively. This study described a protocol for developing γ-oryzanol-loaded gliadin particles with enhanced stability, valuable release-behavior, and decreased HT-29 proliferation.