ABSTRACT
In this study, we evaluated the concentration of lipases from Aspergillus niger using efficient and low-cost methods aiming at application in the treatment of waste cooking oils. The change in ionic strength of the medium by the addition of salt and precipitation with ethanol increased the specific activity from 2.90 to 28.50 U/mg, resulting in a purification factor of 9.82-fold. The use of acetone resulted in a specific activity of 33.63 U/mg, resulting in a purification factor of 11.60-fold. After that, the concentrated lipase was used in the hydrolysis of waste cooking oil and 753.07 and 421.60 µmol/mL of free fatty acids were obtained for the enzyme precipitated with ethanol and acetone, respectively. The hydrolysis of waste cooking oil catalyzed by homemade purified lipase in ultrasonic media can be considered a pretreatment of oil by converting a significant amount of triglycerides into free fatty acids.
Subject(s)
Aspergillus niger/enzymology , Fungal Proteins/chemistry , Lipase/chemistry , Plant Oils/chemistry , Fatty Acids/chemistry , Hydrolysis , Waste ManagementABSTRACT
This work aims to evaluate the production of second-generation ethanol from sugarcane bagasse hydrolysate without acetic acid (inhibitor) detoxification. Three isolated yeast strains from lignocellulosic materials were evaluated, and one strain (UFFS-CE-3.1.2), identified using large subunit rDNA sequences as Wickerhamomyces sp., showed satisfactory results in terms of ethanol production without acetic acid removal. A Plackett-Burman design was used to evaluate the influence of hydrolysate composition and nutrients supplementation in the fermentation medium for the second-generation ethanol production. Two fermentation kinetics were performed, with controlled pH at 5.5, or keeping the initial pH at 4.88. The fermentation conducted without pH adjustment and supplementation of nutrients reported the best result in terms of second-generation ethanol production. Wickerhamomyces sp., isolated as UFFS-CE-3.1.2, was considered promising in the production of second-generation ethanol by using crude (non-detoxified) sugarcane hydrolysate.
Subject(s)
Ethanol , Saccharum , Cellulose , Fermentation , Hydrolysis , WoodABSTRACT
The present study evaluated the purification of inulinase by changing the ionic strength of the medium by addition of NaCl and CaCl2 followed by precipitation with n-propyl alcohol or iso-propyl alcohol. The effects of the concentration of alcohols and the rate of addition of alcohols in the crude extract on the purification yield and purification factor were evaluated. Precipitation caused an activation of enzyme and allowed purification factors up to 2.4-fold for both alcohols. The purification factor was affected positively by the modification of the ionic strength of the medium to 0.5 mol.L-1 NaCl before precipitation with the alcohol (n-propyl or iso-propyl). A purification factor of 4.8-fold and an enzyme yield of 78.1 % could be achieved by the addition of 0.5 mol.L-1 of NaCl to the crude extract, followed by the precipitation with 50 % (v/v) of n-propyl alcohol, added at a flow rate of 19.9 mL/min.
Subject(s)
Alcohols/chemistry , Chemical Precipitation , Glycoside Hydrolases/chemistry , Glycoside Hydrolases/isolation & purification , Osmolar Concentration , Calcium Chloride/chemistry , Culture Media/chemistry , Kluyveromyces/chemistry , Kluyveromyces/isolation & purification , Reference Values , Reproducibility of Results , Salts/chemistry , Sodium Chloride/chemistry , Solvents/chemistryABSTRACT
ABSTRACT The present study evaluated the purification of inulinase by changing the ionic strength of the medium by addition of NaCl and CaCl2 followed by precipitation with n-propyl alcohol or iso-propyl alcohol. The effects of the concentration of alcohols and the rate of addition of alcohols in the crude extract on the purification yield and purification factor were evaluated. Precipitation caused an activation of enzyme and allowed purification factors up to 2.4-fold for both alcohols. The purification factor was affected positively by the modification of the ionic strength of the medium to 0.5 mol.L-1 NaCl before precipitation with the alcohol (n-propyl or iso-propyl). A purification factor of 4.8-fold and an enzyme yield of 78.1 % could be achieved by the addition of 0.5 mol.L-1 of NaCl to the crude extract, followed by the precipitation with 50 % (v/v) of n-propyl alcohol, added at a flow rate of 19.9 mL/min.
Subject(s)
Osmolar Concentration , Chemical Precipitation , Alcohols/chemistry , Glycoside Hydrolases/isolation & purification , Glycoside Hydrolases/chemistry , Reference Values , Salts/chemistry , Solvents/chemistry , Kluyveromyces/isolation & purification , Kluyveromyces/chemistry , Calcium Chloride/chemistry , Sodium Chloride/chemistry , Reproducibility of Results , Culture Media/chemistryABSTRACT
This work is focused on the synthesis of the fructooligosaccharides (FOS) from sucrose and inulin, using free, immobilized and pre-treated immobilized inulinase from Kluyveromyces marxianus NRRL Y 7571 and Aspergillus niger in an aqueous-organic system. Initially, the influence of pre-treatment using four different gases, propane, n-butane, CO(2) and liquefied petroleum gas (LPG), was investigated towards FOS production and best results were found when both enzymes were previously treated with LPG. The best reaction yields were obtained when the immobilized enzymes were treated with LPG. Considering FOS synthesis using the enzyme from A. niger, yields of 26.62% of GF2 (kestose), 30.62% of GF3 (nystose) and 8.47% of GF4 (fructosyl nystose) were achieved using sucrose as substrate. Using inulinases from K. marxianus NRRL Y 7571, 11.89% of GF2 and 20.83% of GF3 were obtained, using inulin as substrate. However, promising results were achieved using the free form of inulinase from A. niger (77.19% of GF2; 14.03% of GF3 and 0.07% of GF4) using inulin as substrate.