Comparative molecular and conventional cytogenetic analyses of three species of Rhinella (Anura; Bufonidae).

The genus Rhinella corresponds to a group of anurans characterized by numerous taxonomic and systemic challenges, leading to their organization into species complexes. Cytogenetic data for this genus thus far are limited to the diploid number and chromosome morphology, which remain highly conserved among the species. In this study, we analyse the karyotypes of three species of the genus Rhinella (Rhinella granulosa, Rhinella margaritifera, and Rhinella marina) using both classical (conventional staining and C-banding) and molecular (FISH-fluorescence in situ hybridization with 18S rDNA, telomeric sequences, and microsatellite probes) cytogenetic approaches. The aim of this study is to provide data that can reveal variations in the distribution of repetitive sequences that can contribute to understanding karyotypic diversification in these species. The results revealed a conserved karyotype across the species, with 2n = 22 and FN = 44, with metacentric and submetacentric chromosomes. C-banding revealed heterochromatic blocks in the pericentromeric region for all species, with a proximal block on the long arms of pairs 3 and 6 in R. marina and on the short arms of pairs 4 and 6 in R. margaritifera. Additionally, 18S rDNA probes hybridized to pair 5 in R. granulosa, to pair 7 in R. marina, and to pair 10 in R. margaritifera. Telomeric sequence probes displayed signals exclusively in the distal region of the chromosomes, while microsatellite DNA probes showed species-specific patterns. These findings indicate that despite a conserved karyotypical macrostructure, chromosomal differences exist among the species due to the accumulation of repetitive sequences. This variation may be attributed to chromosome rearrangements or differential accumulation of these sequences, highlighting the dynamic role of repetitive sequences in the chromosomal evolution of Rhinella species. Ultimately, this study emphasizes the importance of the role of repetitive DNAs in chromosomal rearrangements to elucidate the evolutionary mechanisms leading to independent diversification in the distinct phylogenetic groups of Rhinella.

Observation of Replica Symmetry Breaking in Standard Mode-Locked Fiber Laser.

We report the first experimental demonstration of the replica symmetry breaking (RSB) phenomenon in a fiber laser system supporting standard mode-locking (SML) regime. Though theoretically predicted, this photonic glassy phase remained experimentally undisclosed so far. We employ an ytterbium-based mode-locked fiber laser with a very rich phase diagram. Two phase transitions are observed separating three different regimes: cw, quasi-mode-locking (QML), and SML. The regimes are intrinsically related to the distinct dynamics of intensity fluctuations in the laser spectra. We set the connection between the RSB glassy phase with frustrated modes and onset of L-shaped intensity distributions in the QML regime, which impact directly the replica overlap measure.

Harnessing Brazilian biodiversity database: identification of flavonoids as potential inhibitors of SARS-CoV-2 main protease using computational approaches and all-atom molecular dynamics simulation.

SARS-CoV-2 (Severe Acute Respiratory Syndrome Coronavirus 2) is the etiological agent responsible for the global outbreak of COVID-19 (Coronavirus Disease 2019). The main protease of SARS-CoV-2, Mpro, is a key enzyme that plays a vital role in mediating viral replication and transcription. In this study, a comprehensive computational approach was employed to investigate the binding affinity, selectivity, and stability of natural product candidates as potential new antivirals acting on the viral polyprotein processing mediated by SARS-CoV-2 Mpro. A library of 288 flavonoids extracted from Brazilian biodiversity was screened to select potential Mpro inhibitors. An initial filter based on Lipinski's rule of five was applied, and 204 compounds that did not violate any of the Lipinski rules were selected. The compounds were then docked into the active site of Mpro using the GOLD program, and the poses were subsequently re-scored using MM-GBSA (Molecular Mechanics Generalized Born Surface Area) binding free energy calculations performed by AmberTools23. The top five flavonoids with the best MM-GBSA binding free energy values were selected for analysis of their interactions with the active site residues of the protein. Next, we conducted a toxicity and drug-likeness analysis, and non-toxic compounds were subjected to molecular dynamics simulation and free energy calculation using the MM-PBSA (Molecular Mechanics Poisson-Boltzmann Surface Area) method. It was observed that the five selected flavonoids had lower MM-GBSA binding free energy with Mpro than the co-crystal ligand. Furthermore, these compounds also formed hydrogen bonds with two important residues, Cys145 and Glu166, in the active site of Mpro. Two compounds that passed the drug-likeness filter showed stable conformations during the molecular dynamics simulations. Among these, NuBBE_867 exhibited the best MM-PBSA binding free energy value compared to the crystallographic inhibitor. Therefore, this study suggests that NuBBE_867 could be a potential inhibitor against the main protease of SARS-CoV-2 and may be further examined to confirm our results.

A mode-locked random laser generating transform-limited optical pulses.

Ever since the mid-1960's, locking the phases of modes enabled the generation of laser pulses of duration limited only by the uncertainty principle, opening the field of ultrafast science. In contrast to conventional lasers, mode spacing in random lasers is ill-defined because optical feedback comes from scattering centres at random positions, making it hard to use mode locking in transform limited pulse generation. Here the generation of sub-nanosecond transform-limited pulses from a mode-locked random fibre laser is reported. Rayleigh backscattering from decimetre-long sections of telecom fibre serves as laser feedback, providing narrow spectral selectivity to the Fourier limit. The laser is adjustable in pulse duration (0.34-20 ns), repetition rate (0.714-1.22 MHz) and can be temperature tuned. The high spectral-efficiency pulses are applied in distributed temperature sensing with 9.0 cm and 3.3 × 10-3 K resolution, exemplifying how the results can drive advances in the fields of spectroscopy, telecommunications, and sensing.

Optical clearing agents based on metallic and dielectric nanoparticles for caries diagnostic by optical coherence tomography.

OBJECTIVE: This study aimed to assess the effect of titanium dioxide (TiO2) and silver (Ag) nanoparticles dispersed in glycerol or water, serving as optical clearing agents nanocolloids (OCAs-NC), for improving optical coherence tomography (OCT) images and highlighting incipient lesions in ex vivo human teeth. MATERIALS AND METHODS: Twelve human teeth with incipient lesions were divided into seven groups according to the OCA-NC; they were subjected to G1 (air), G2 (glycerol), G3 (TiO2 0.1%), G4 (TiO2 0.01%), G5 (TiO2 0.001%), G6 (AgNO3 10%), and G7 (AgNO3 100%). The OCA-NC was applied to the occlusal surface, and two-dimensional images of the specimens were analyzed using OCT (930 nm central wavelength; 100 nm bandwidth; 5 mW output power; axial resolution of 7/5.3 µm in water and air, respectively; lateral resolution of 8 µm; and light penetration depth of 1.6 mm inside the sample). RESULTS: The findings demonstrated that the utilization of OCAs-NC containing metallic or dielectric nanoparticles (AgNO3 and TiO2) led to improved differentiation between sound and demineralized enamel on occlusal surfaces. Additionally, it enhanced the depth of image penetration when analyzing this hard tissue with OCT. CLINICAL RELEVANCE: In the current context of minimally invasive dentistry, the use of OCAs-NC in conjunction with OCT can provide clinicians with early diagnosis, allowing for the determination of less/more invasive therapies and consequently halting the disease before cavitation of dental tissues occurs.

Hypoxia modulates the phenotype of mechanically stressed endothelial cells responding to CoCr-enriched medium.

Given the importance of the endothelial cell phenotype in dental peri-implant healing processes, the aim of this study was to better assess the involvement of endothelial cells responding to cobalt-chromium (CoCr)-enriched medium. Biologically, cobalt is widely used molecule to induce chemical experimental hypoxia because it stabilizes hypoxia inducible factors (HIF1α). The aplication of hypoxia models provides better experimental condition to allow its impact on cellular metabolism, by looking for biochemical and molecular issues. Thus, this study looks for understaing whether CoCr-based materials are able to modulate endothelial cells considering the hypoxic effect prmoted by cobalt. Firstly, our data shows there is a siginificant effect on endothelial phenotype by modulating the expression of VEGF and eNOS genes, whith low requirement of genes related with proteasome intracellular complex. Importantly, the data were validated using classical chemical modulators of hypoxia signaling [chrysin (5,7-dihydroxyflavone) and Dimethyloxalylglycine (DMOG)] in functional assays. Altogether, these data validate the hypothesis that hipoxya is important to maintain the phenotype of endothelial cells, and it is properly interesting during the tissue regeneration surrounding implants and so compromising osseointegration process. Finally, it is important to mention that the cobalt released from CoCr devices might contribute with an sufficient microenvironment surrounding implanted devices and it paviments new roads looking for more bioactive surfaces of implantable materials in human health.

Mechanosignaling-related angiocrine factors drive osteoblastic phenotype in response to zirconia.

BACKGROUND: The growing use of zirconia as a ceramic material in dentistry is attributed to its biocompatibility, mechanical properties, esthetic appearance, and reduced bacterial adhesion. These favorable properties make ceramic materials a viable alternative to commonly used titanium alloys. Mimicking the physiological properties of blood flow, particularly the mechanosignaling in endothelial cells (ECs), is crucial for enhancing our understanding of their role in the response to zirconia exposure. METHODS: In this study, EC cultures were subjected to shear stress while being exposed to zirconia for up to 3 days. The conditioned medium obtained from these cultures was then used to expose osteoblasts for a duration of 7 days. To investigate the effects of zirconia on osteoblasts, we examined the expression of genes associated with osteoblast differentiation, including Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Additionally, we assessed the impact of mechanosignaling-related angiocrine factors on extracellular matrix (ECM) remodeling by measuring the activities of matrix metalloproteinases 2 and 9 (MMP2 and MMP9) during the acquisition of the osteogenic phenotype, which precedes mineralization. RESULTS: Our data revealed that mechanosignaling-related angiocrine factors play a crucial role in promoting an osteoblastic phenotype in response to zirconia exposure. Specifically, exposed osteoblasts exhibited significantly higher expression levels of genes associated with osteoblast differentiation, such as Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Furthermore, the activities of MMP2 and MMP9, which are involved in ECM remodeling, were modulated by mechanosignaling-related angiocrine factors. This modulation is likely an initial event preceding the mineralization phase. CONCLUSION: Based on our findings, we propose that mechanosignaling drives the release of angiocrine factors capable of modulating the osteogenic phenotype at the biointerface with zirconia. This process creates a microenvironment that promotes wound healing and osseointegration. Moreover, these results highlight the importance of considering the mechanosignaling of endothelial cells in the modulation of bone healing and osseointegration in the context of blood vessel effects. Our data provide new insights and open avenues for further investigation into the influence of mechanosignaling on bone healing and the osseointegration of dental devices.

Berberine-fluconazole microparticle-based combination therapy to treat candidiasis infections.

AIM: This study aims to incorporate alginate microparticles containing berberine and fluconazole into two different types of pharmaceutical formulations, to subsequently evaluate the antifungal activity against Candida albicans. METHODS AND RESULTS: Alginate microparticles containing BBR (berberine) and FLU (fluconazole) were produced by the spray-drying technique, characterized and incorporated in two pharmaceutical formulations, a vaginal cream and artificial saliva. Broth microdilution, checkerboard, time-kill curve, and scanning electron microscopy were carried out to determine the antifungal effects of BBR and FLU against C. albicans. The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) values of free BBR were 125 µg ml-1. Synergism between BBR and FLU was demonstrated by a fractional inhibitory concentration index (FICI) = 0.0762. The time-kill curve for the combination BBR + FLU showed a more pronounced decrease in fungal growth in comparison to free drugs, and an antibiofilm effect of BBR occurred in the formation and preformed biofilm. CONCLUSION: Alginate microparticles containing BBR and FLU were obtained and incorporated in a vaginal cream and artificial saliva. Both formulations showed good stability, antifungal effects, and organoleptic characteristics, which suggest that BBR-FLU microparticles in formulations have potential as antifungal therapy.

Exploring Natural Alkaloids from Brazilian Biodiversity as Potential Inhibitors of the Aedes aegypti Juvenile Hormone Enzyme: A Computational Approach for Vector Mosquito Control.

This study explores the potential inhibitory activity of alkaloids, a class of natural compounds isolated from Brazilian biodiversity, against the mJHBP enzyme of the Aedes aegypti mosquito. This mosquito is a significant vector of diseases such as dengue, zika, and chikungunya. The interactions between the ligands and the enzyme at the molecular level were evaluated using computational techniques such as molecular docking, molecular dynamics (MD), and molecular mechanics with generalized Born surface area (MMGBSA) free energy calculation. The findings suggest that these compounds exhibit a high binding affinity with the enzyme, as confirmed by the binding free energies obtained in the simulation. Furthermore, the specific enzyme residues that contribute the most to the stability of the complex with the compounds were identified: specifically, Tyr33, Trp53, Tyr64, and Tyr129. Notably, Tyr129 residues were previously identified as crucial in the enzyme inhibition process. This observation underscores the significance of the research findings and the potential of the evaluated compounds as natural insecticides against Aedes aegypti mosquitoes. These results could stimulate the development of new vector control agents that are more efficient and environmentally friendly.

Influence of different adhesion strategies on glass fiber post retention.

Background: Failures in glass fiber post (GFP) retention may be associated with low adhesion achieved in root dentin. Material and Methods: 55 single-rooted premolars were endodontically treated and distributed according to different adhesion strategies (n=11): G1: RelyX ARC (3M ESPE; etch-rinse strategy); G2: Relyx Ultimate (3M ESPE; etch-rinse strategy); G3: AllCem (FGM; etch-rinse strategy); G4: Relyx Ultimate (3M ESPE; self-etching strategy); G5: RelyX U200 (3M ESPE; self-adhesive strategy). For Bonding Strength (BS) analysis, the roots were sectioned in slices (1.0mm thickness) corresponding to each root third and submitted to push-out test. The type of failure was assessed by scanning electron microscopy (SEM). Results: The highest BS averages were found in G2 and G3. However, in the middle and apical root thirds, G3 showed statistically similar results to G4 and G5. In the cervical and middle third, G1 was statistically similar to G4 and G5. The mixed type of failure was the most common in all groups. Conclusions: Self-etching (G4) and self-adhesive resin (G5) cements, showed similar BS results of immediate bonding in the cementation of GFP compared to conventional resin cements (G1, G2, G3). Key words:Dental Cements, Dentin-Bonding Agents, Post and Core Technique, Dental Bonding.

Intensity-Dependent Optical Response of 2D LTMDs Suspensions: From Thermal to Electronic Nonlinearities.

The nonlinear optical (NLO) response of photonic materials plays an important role in the understanding of light-matter interaction as well as pointing out a diversity of photonic and optoelectronic applications. Among the recently studied materials, 2D-LTMDs (bi-dimensional layered transition metal dichalcogenides) have appeared as a beyond-graphene nanomaterial with semiconducting and metallic optical properties. In this article, we review most of our work in studies of the NLO response of a series of 2D-LTMDs nanomaterials in suspension, using six different NLO techniques, namely hyper Rayleigh scattering, Z-scan, photoacoustic Z-scan, optical Kerr gate, and spatial self-phase modulation, besides the Fourier transform nonlinear optics technique, to infer the nonlinear optical response of semiconducting MoS2, MoSe2, MoTe2, WS2, semimetallic WTe2, ZrTe2, and metallic NbS2 and NbSe2. The nonlinear optical response from a thermal to non-thermal origin was studied, and the nonlinear refraction index and nonlinear absorption coefficient, where present, were measured. Theoretical support was given to explain the origin of the nonlinear responses, which is very dependent on the spectro-temporal regime of the optical source employed in the studies.

Nanohydroxyapatite-Coated Titanium Surface Increases Vascular Endothelial Cells Distinct Signaling Responding to High Glucose Concentration.

AIM: The success of dental implants depends on osseointegration can be compromised by well-known related adverse biological processes, such as infection and diabetes. Previously, nanohydroxyapatite-coated titanium surfaces (nHA_DAE) have been shown to contain properties that promote osteogenesis by enhancing osteoblast differentiation. In addition, it was hypothesized to drive angiogenesis in high-glucose microenvironments, mimicking diabetes mellitus (DM). On the other hand, the null hypothesis would be confirmed if no effect was observed in endothelial cells (ECs). MATERIALS AND METHODS: Titanium discs presenting the differential surfaces were previously incubated in an FBS-free cell culture medium for up to 24 h, which was, thereafter, supplemented with 30.5 mM of glucose to expose human umbilical vein endothelial cells (HUVECs, ECs) for 72 h. They were then harvested, and the sample was processed to provide molecular activity of specific genes related to EC survival and activity by using qPCR, and the conditioned medium by ECs was used to evaluate the activity of matrix metalloproteinases (MMPs). RESULTS: Our data guaranteed better performance of this nanotechnology-involved titanium surface to this end once the adhesion and survival characteristics were ameliorated by promoting a higher involvement of ß1-Integrin (~1.5-fold changes), Focal Adhesion Kinases (FAK; ~1.5-fold changes) and SRC (~2-fold changes) genes. This signaling pathway culminated with the cofilin involvement (~1.5-fold changes), which guaranteed cytoskeleton rearrangement. Furthermore, nHA_DAE triggered signaling that was able to drive the proliferation of endothelial cells once the cyclin-dependent kinase gene was higher in response to it, while the P15 gene was significantly down-regulated with an impact on the statement of angiogenesis. CONCLUSIONS: Altogether, our data show that a nanohydroxyapatite-coated titanium surface ameliorates the EC performance in a high-glucose model in vitro, suggesting its potential application in DM patients.

Adipogenesis-Related Metabolic Condition Affects Shear-Stressed Endothelial Cells Activity Responding to Titanium.

PURPOSE: Obesity has increased around the world. Obese individuals need to be better assisted, with special attention given to dental and medical specialties. Among obesity-related complications, the osseointegration of dental implants has raised concerns. This mechanism depends on healthy angiogenesis surrounding the implanted devices. As an experimental analysis able to mimic this issue is currently lacking, we address this issue by proposing an in vitro high-adipogenesis model using differentiated adipocytes to further investigate their endocrine and synergic effect in endothelial cells responding to titanium. MATERIALS AND METHODS: Firstly, adipocytes (3T3-L1 cell line) were differentiated under two experimental conditions: Ctrl (normal glucose concentration) and High-Glucose Medium (50 mM of glucose), which was validated using Oil Red O Staining and inflammatory markers gene expression by qPCR. Further, the adipocyte-conditioned medium was enriched by two types of titanium-related surfaces: Dual Acid-Etching (DAE) and Nano-Hydroxyapatite blasted surfaces (nHA) for up to 24 h. Finally, the endothelial cells (ECs) were exposed in those conditioned media under shear stress mimicking blood flow. Important genes related to angiogenesis were then evaluated by using RT-qPCR and Western blot. RESULTS: Firstly, the high-adipogenicity model using 3T3-L1 adipocytes was validated presenting an increase in the oxidative stress markers, concomitantly with an increase in intracellular fat droplets, pro-inflammatory-related gene expressions, and also the ECM remodeling, as well as modulating mitogen-activated protein kinases (MAPKs). Additionally, Src was evaluated by Western blot, and its modulation can be related to EC survival signaling. CONCLUSION: Our study provides an experimental model of high adipogenesis in vitro by establishing a pro-inflammatory environment and intracellular fat droplets. Additionally, the efficacy of this model to evaluate the EC response to titanium-enriched mediums under adipogenicity-related metabolic conditions was analyzed, revealing significant interference with EC performance. Altogether, these data gather valuable findings on understanding the reasons for the higher percentage of implant failures in obese individuals.

In Vitro Diagnostic Assay to Detect SARS-CoV-2-Neutralizing Antibody in Patient Sera Using Engineered ACE-2 Mini-Protein.

The recent development and mass administration of Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) vaccines allowed for disease control, reducing hospitalizations and mortality. Most of these vaccines target the SARS-CoV-2 Spike (S) protein antigens, culminating with the production of neutralizing antibodies (NAbs) that disrupt the attachment of the virus to ACE2 receptors on the host cells. However, several studies demonstrated that the NAbs typically rise within a few weeks after vaccination but quickly reduce months later. Thus, multiple booster administration is recommended, leading to vaccination hesitancy in many populations. Detecting serum anti-SARS-CoV-2 NAbs can instruct patients and healthcare providers on correct booster strategies. Several in vitro diagnostics kits are available; however, their high cost impairs the mass NAbs diagnostic testing. Recently, we engineered an ACE2 mimetic that interacts with the Receptor Binding Domain (RBD) of the SARS-2 S protein. Here we present the use of this engineered mini-protein (p-deface2 mut) to develop a detection assay to measure NAbs in patient sera using a competitive ELISA assay. Serum samples from twenty-one patients were tested. Nine samples (42.8%) tested positive, and twelve (57.1%) tested negative for neutralizing sera. The data correlated with the result from the standard commercial assay that uses human ACE2 protein. This confirmed that p-deface2 mut could replace human ACE2 in ELISA assays. Using bacterially expressed p-deface2 mut protein is cost-effective and may allow mass SARS-CoV-2 NAbs detection, especially in low-income countries where economical diagnostic testing is crucial. Such information will help providers decide when a booster is required, reducing risks of reinfection and preventing the administration before it is medically necessary.

Euphorbia tirucalli latex loaded polymer nanoparticles: Synthesis, characterization, in vitro release and in vivo antinociceptive action.

The encapsulation of drugs in micro and nanocarriers has helped to resolve mechanisms of cellular resistance and decrease drug side effects as well. In this study, poly(D,L-lactide-co-glycolide) (PLGA) was used to encapsulate the Euphol active substance-containing latex from Euphorbia tirucalli (E-latex). The nanoparticles (NP) were prepared using the solvent evaporation method and the physical and chemical properties were evaluated using spectrophotometric techniques. FTIR was used to prove the formation of the ester bond between the E-latex and PLGA-NP. The UV-Vis spectroscopic technique was used to show that more than 75% of the latex was encapsulated; the same technique was used to determine the release profile of the compound at different pH values, as well as determining the speed with which the process occurs through kinetic models, and it was observed that the best adjustments occurred for the Korsmeyer-Peppas model and the Higuchi model. The DLS technique was used to determine the diameter of the particles produced as well as their zeta potential (ZP). The sizes of the particles varied from 497 to 764 nm, and it was observed that the increase in E-latex concentration causes a reduction in the diameter of the NP and an increase in the ZP (-1.44 to -22.7 mV), due to more functional groups from latex film being adsorbed to the NPs surfaces. The thermogravimetric experiments exhibit the glass transition temperatures (Tg) that is appropriate for the use of formulated NPs as a stable drug delivery device before use. The in vivo activity of E-NPs (30 and 100 mg/Kg/p.o.) was tested against carrageenan-induced mechanical hypernociception. The data demonstrated a significantly antinociceptive effect for E-NPs, suggesting that E-latex nanoencapsulation preserved its desired properties.

Engineering defensin α-helix to produce high-affinity SARS-CoV-2 spike protein binding ligands.

The binding of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike protein to the angiotensin-converting enzyme 2 (ACE2) receptor expressed on the host cells is a critical initial step for viral infection. This interaction is blocked through competitive inhibition by soluble ACE2 protein. Therefore, developing high-affinity and cost-effective ACE2 mimetic ligands that disrupt this protein-protein interaction is a promising strategy for viral diagnostics and therapy. We employed human and plant defensins, a class of small (2-5 kDa) and highly stable proteins containing solvent-exposed alpha-helix, conformationally constrained by two disulfide bonds. Therefore, we engineered the amino acid residues on the constrained alpha-helix of defensins to mimic the critical residues on the ACE2 helix 1 that interact with the SARS-CoV-2 spike protein. The engineered proteins (h-deface2, p-deface2, and p-deface2-MUT) were soluble and purified to homogeneity with a high yield from a bacterial expression system. The proteins demonstrated exceptional thermostability (Tm 70.7°C), high-affinity binding to the spike protein with apparent Kd values of 54.4 ± 11.3, 33.5 ± 8.2, and 14.4 ± 3.5 nM for h-deface2, p-deface2, and p-deface2-MUT, respectively, and were used in a diagnostic assay that detected SARS-CoV-2 neutralizing antibodies. This work addresses the challenge of developing helical ACE2 mimetics by demonstrating that defensins provide promising scaffolds to engineer alpha-helices in a constrained form for designing of high-affinity ligands.

Karyotypical Confirmation of Natural Hybridization between Two Manatee Species, Trichechus manatus and Trichechus inunguis.

Two species of manatees are found in Northern Brazil-the Antillean manatee (Trichechus manatus), which is found along the coast from Florida to Northeastern Brazil, and the Amazonian manatee (Trichechus inunguis), endemic to the Amazon drainage basin. These species show a sympatric distribution in the region of the Marajó Archipelago, an estuarine area surrounding the Amazon River mouth. There is evidence of the occurrence of interspecific hybrids in this area, based on mitochondrial DNA analyses, although the use of nuclear markers has not corroborated this proposal. Considering that these species show very distinct karyotypes, despite being closely related (2n = 48 in T. manatus and 2n = 56 in T. inunguis), hybrids would present distinct chromosome numbers. Based on this, we conducted cytogenetic analyses using classic and molecular techniques in three calves found stranded in the Marajó Island and Amapá coast. The results showed that one of them, morphologically classified as T. inunguis, presented the correspondent karyotype, with 2n = 56. However, the other two, which were phenotypically similar to T. manatus, showed 2n = 49. Despite the same diploid number, their G-banding patterns revealed some differences. The results of the distribution of some microsatellite sequences have also confirmed the heterozygosity of some chromosomal pairs in these two individuals. These results are the first indubitable confirmation of the occurrence of natural hybrids between T. manatus and T. inunguis, and also brings about some issues concerning the viability of hybrids, considering that these two individuals do not correspond to an F1 hybrid, but instead, both presented a possible F2 karyotype.

Bibliometric Analysis: Nanotechnology and COVID-19.

BACKGROUND: COVID-19 pandemic information is critical to study it further, but the virus has still not been confined. In addition, even if there is no longer any threat, more knowledge may be gathered from these resources. METHODS: The data used in this study was gathered from several scientific areas and the links between them. Since the COVID-19 pandemic has not been fully contained, and additional information can be gleaned from these references, bibliometric analysis of it is important Results: A total of 155 publications on the topic of "COVID-19" and the keyword "nanotechnology" was identified in the Scopus database between 2020 and 2021 in a network visualization map. CONCLUSION: As a result, our analysis was conducted appropriately to provide a comprehensive understanding of COVID-19 and nanotechnology and prospective research directions for medicinal chemistry.

Activity of poly(methacrylic acid)-silver nanoparticles on fluconazole-resistant Candida albicans strains: Synergistic and cytotoxic effects.

AIMS: To synthesize and evaluate the antifungal activity of poly(methacrylic acid)-silver nanoparticles (PMAA-AgNPs) against nine Candida albicans isolated from clinical specimens. METHODS AND RESULTS: The effects of PMAA-AgNPs-fluconazole combination was analysed by checkerboard methodology. The synergistic potential of PMAA-AgNPs-fluconazole was determined by the fractional inhibitory concentration index (FICI). The inhibition of germ tube formation and the determination of PMAA-AgNPs cytotoxicity were also performed. All C. albicans strains were susceptible to PMAA-AgNPs and resistant to fluconazole. PMAA-AgNPs at subinhibitory concentrations restored the susceptibility of resistant C. albicans to fluconazole, whose FICI ranged from 0.3 to 0.5. The synergistic interaction of the combination was observed in eight of nine strains. The PMAA-AgNPs-fluconazole combination was also able to inhibit the germ tube formation. PMAA-AgNPs showed a dose-dependent decrease in viability for cells tested, with 50% cytotoxic concentration (CC50 ) values of 6.5, 4.9 and 6.8 µg ml-1 for macrophages, fibroblasts and Vero cells, respectively. CONCLUSIONS: This study demonstrated that, in general, PMAA-AgNPs acts synergistically in combination with fluconazole, inhibiting fluconazole-resistant C. albicans strains. PMAA-AgNPs-fluconazole combination was also able to inhibit germ tube formation, an important virulence factor. Inhibitory effect of PMAA-AgNPs alone or in combination was higher in C. albicans than in mammalian cells. SIGNIFICANCE AND IMPACT OF STUDY: This study shows the potential of PMAA-AgNPs combined with fluconazole to inhibit fluconazole-resistant C. albicans strains.

Exploiting Nanomaterials for Optical Coherence Tomography and Photoacoustic Imaging in Nanodentistry.

There is already a societal awareness of the growing impact of nanoscience and nanotechnology, with nanomaterials (with at least one dimension less than 100 nm) now incorporated in items as diverse as mobile phones, clothes or dentifrices. In the healthcare area, nanoparticles of biocompatible materials have already been used for cancer treatment or bioimaging enhancement. Nanotechnology in dentistry, or nanodentistry, has already found some developments in dental nanomaterials for caries management, restorative dentistry and orthodontic adhesives. In this review, we present state-of-the-art scientific development in nanodentistry with an emphasis on two imaging techniques exploiting nanomaterials: optical coherence tomography (OCT) and photoacoustic imaging (PAI). Examples will be given using OCT with nanomaterials to enhance the acquired imaging, acting as optical clearing agents for OCT. A novel application of gold nanoparticles and nanorods for imaging enhancement of incipient occlusal caries using OCT will be described. Additionally, we will highlight how the OCT technique can be properly managed to provide imaging with spatial resolution down to 10's-100's nm resolution. For PAI, we will describe how new nanoparticles, namely TiN, prepared by femtosecond laser ablation, can be used in nanodentistry and will show photoacoustic microscopy and tomography images for such exogenous agents.