ABSTRACT
Objectives: Current diameter-based guidelines for ascending thoracic aortic aneurysms (aTAA) do not consistently predict risk of dissection/rupture. ATAA wall stresses may enhance risk stratification independent of diameter. The relation of wall stresses and diameter indexed to height and body surface area (BSA) is unknown. Our objective was to compare aTAA wall stresses with indexed diameters in relation to all-cause mortality at 3.75 years follow-up. Methods: Finite element analyses were performed in a veteran population with aortas ≥ 4.0 cm. Three-dimensional geometries were reconstructed from computed tomography with models accounting for pre-stress geometries. A fiber-embedded hyperelastic material model was applied to obtain wall stress distributions under systolic pressure. Peak wall stresses were compared across guideline thresholds for diameter/BSA and diameter/height. Hazard ratios for all-cause mortality and surgical aneurysm repair were estimated using cause-specific Cox proportional hazards models. Results: Of 253 veterans, 54 (21 %) had aneurysm repair at 3.75 years. Indexed diameter alone would have prompted repair at baseline in 17/253 (6.7 %) patients, including only 4/230 (1.7 %) with diameter < 5.5 cm. Peak wall stresses did not significantly differ across guideline thresholds for diameter/BSA (circumferential: p = 0.15; longitudinal: p = 0.18), but did differ for diameter/height (circumferential: p = 0.003; longitudinal: p = 0.048). All-cause mortality was independently associated with peak longitudinal stresses (p = 0.04). Peak longitudinal stresses were best predicted by diameter (c-statistic = 0.66), followed by diameter/height (c-statistic = 0.59), and diameter/BSA (c-statistic = 0.55). Conclusions: Diameter/height improved stratification of peak wall stresses compared to diameter/BSA. Peak longitudinal stresses predicted all-cause mortality independent of age and indexed diameter and may aid risk stratification for aTAA adverse events.
ABSTRACT
The affinity of hydronium ions (H3O+) for the air-water interface is a crucial question in environmental chemistry. While sum-frequency generation (SFG) spectroscopy has been instrumental in indicating the preference of H3O+ for the interface, key questions persist regarding the molecular origin of the SFG spectral changes in acidified water. Here we combine nanosecond long neural network (NN) reactive simulations of pure and acidified water slabs with NN predictions of molecular dipoles and polarizabilities to calculate SFG spectra of long reactive trajectories including proton transfer events. Our simulations show that H3O+ ions cause two distinct changes in phase-resolved SFG spectra: first, a low-frequency tail due to the vibrations of H3O+ and its first hydration shell, analogous to the bulk proton continuum, and second, an enhanced hydrogen-bonded band due to the ion-induced static field polarizing molecules in deeper layers. Our calculations confirm that changes in the SFG spectra of acidic solutions are caused by hydronium ions preferentially residing at the interface.
ABSTRACT
BACKGROUND: In ascending thoracic aortic aneurysm risk stratification, aortic area/height ratio is a reasonable alternative to maximum diameter. Biomechanically, aortic dissection may be initiated by wall stress exceeding wall strength. Our objective was to evaluate the association between aortic area/height and peak aneurysm wall stresses in relation to valve morphology and 3-year all-cause mortality. METHODS: Finite element analysis was performed on 270 ascending thoracic aortic aneurysms (46 associated with bicuspid and 224 with tricuspid aortic valves) in veterans. Three-dimensional aneurysm geometries were reconstructed from computed tomography and models developed accounting for prestress geometries. Fiber-embedded hyperelastic material model was applied to obtain aneurysm wall stresses during systole. Correlations of aortic area/height ratio and peak wall stresses were compared across valve types. Area/height ratio was evaluated across peak wall stress thresholds obtained from proportional hazards models of 3-year all-cause mortality, with aortic repair treated as a competing risk. RESULTS: Aortic area/height 10 cm2/m or greater coincided with 23/34 (68%) 5.0 to 5.4 cm and 20/24 (83%) 5.5 cm or greater aneurysms. Area/height correlated weakly with peak aneurysm stresses: for tricuspid valves, r = 0.22 circumferentially and r = 0.24 longitudinally; and for bicuspid valves, r = 0.42 circumferentially and r = 0.14 longitudinally. Age and peak longitudinal stress, but not area/height, were independent predictors of all-cause mortality (age: hazard ratio, 2.20 per 9-year increase, P = .013; peak longitudinal stress: hazard ratio, 1.78 per 73-kPa increase, P = .035). CONCLUSIONS: Area/height was more predictive of high circumferential stresses in bicuspid than tricuspid valve aneurysms, but similarly less predictive of high longitudinal stresses in both valve types. Peak longitudinal stress, not area/height, independently predicted all-cause mortality. VIDEO ABSTRACT.
Subject(s)
Aortic Aneurysm, Thoracic , Bicuspid Aortic Valve Disease , Heart Valve Diseases , Veterans , Humans , Heart Valve Diseases/complications , Heart Valve Diseases/diagnostic imaging , Aortic Aneurysm, Thoracic/diagnostic imaging , Aortic Aneurysm, Thoracic/etiology , Aortic Aneurysm, Thoracic/surgery , Aorta , Aortic Valve/diagnostic imaging , Aortic Valve/surgeryABSTRACT
Risk of aortic dissection in ascending thoracic aortic aneurysms is not sufficiently captured by size-based metrics. From a biomechanical perspective, dissection may be initiated when wall stress exceeds wall strength. Our objective was to assess the association between aneurysm peak wall stresses and 3-year all-cause mortality. Finite element analysis was performed in 273 veterans with chest computed tomography for surveillance of ascending thoracic aortic aneurysms. Three-dimensional geometries were reconstructed and models developed accounting for prestress geometries. A fiber-embedded hyperelastic material model was applied to obtain circumferential and longitudinal wall stresses under systolic pressure. Patients were followed up to 3 years following the scan to assess aneurysm repair and all-cause mortality. Fine-Gray subdistribution hazards were estimated for all-cause mortality based on age, aortic diameter, and peak wall stresses, treating aneurysm repair as a competing risk. When accounting for age, subdistribution hazard of mortality was not significantly increased by peak circumferential stresses (p = 0.30) but was significantly increased by peak longitudinal stresses (p = 0.008). Aortic diameter did not significantly increase subdistribution hazard of mortality in either model (circumferential model: p = 0.38; longitudinal model: p = 0.30). The effect of peak longitudinal stresses on subdistribution hazard of mortality was maximized at a binary threshold of 355kPa, which captured 34 of 212(16%) patients with diameter <5 cm, 11 of 36(31%) at 5.0-5.4 cm, and 11 of 25(44%) at ≥5.5 cm. Aneurysm peak longitudinal stresses stratified by age and diameter were associated with increased hazard of 3-year all-cause mortality in a veteran cohort. Risk prediction may be enhanced by considering peak longitudinal stresses.
ABSTRACT
Whether the air-water interface decreases or increases the acidity of simple organic and inorganic acids compared to the bulk is critically important in a broad range of environmental and biochemical processes. However, a consensus has not yet been achieved on this key question. Here we use machine learning-based reactive molecular dynamics simulations to study the dissociation of paradigmatic nitric and formic acids at the air-water interface. We show that the local acidity profile across the interface is determined by changes in acid and conjugate base solvation and that the acidity decreases abruptly over a transition region of a few molecular layers. At the interface, both acids are weaker than in the bulk due to desolvation. In contrast, acidities below the interface reach a plateau and are all the stronger compared to those in the bulk as the surface to volume ratio of the aqueous phase is large, due to the growing impact of the stabilization of the released proton at the surface of the water. These results imply that the measured degree of dissociation sensitively depends on the experimental probing length and system size and suggest a molecular explanation for the contrasting experimental results. The aerosol size dependence of acidity has important consequences for atmospheric chemistry.
Subject(s)
Air , Water , Formates , Molecular Dynamics Simulation , Water/chemistryABSTRACT
The self-diffusion of water molecules plays a key part in a broad range of essential processes in biochemistry, medical imaging, material science, and engineering. However, its molecular mechanism and the role played by the water hydrogen-bond network rearrangements are not known. Here we combine molecular dynamics simulations and analytic modeling to determine the molecular mechanism of water diffusion. We establish a quantitative connection between the water diffusion coefficient and hydrogen-bond jump exchanges, and identify the features that determine the underlying energetic barrier. We thus provide a unified framework to understand the coupling between translational, rotational, and hydrogen-bond dynamics in liquid water. It explains why these different dynamics do not necessarily exhibit identical temperature dependences although they all result from the same hydrogen-bond exchange events. The consequences for the understanding of water diffusion in supercooled conditions and for water transport in complex aqueous systems, including ionic, biological, and confined solutions, are discussed.
Subject(s)
Hydrogen , Water , Diffusion , Hydrogen Bonding , Spectrophotometry, Infrared/methods , Water/chemistryABSTRACT
OBJECTIVES: Ascending thoracic aortic aneurysms (aTAAs) carry a risk of acute type A dissection. Elective repair guidelines are based on diameter, but complications often occur below diameter threshold. Biomechanically, dissection can occur when wall stress exceeds wall strength. Aneurysm wall stresses may better capture dissection risk. Our aim was to investigate patient-specific aTAA wall stresses associated with a tricuspid aortic valve (TAV) by anatomic region. METHODS: Patients with aneurysm diameter ≥4.0 cm underwent computed tomography angiography. Aneurysm geometries were reconstructed and loaded to systemic pressure while taking prestress into account. Finite element analyses were conducted to obtain wall stress distributions. The 99th percentile longitudinal and circumferential stresses were determined at systole. Wall stresses between regions were compared using one-way analysis of variance with post hoc Tukey HSD for pairwise comparisons. RESULTS: Peak longitudinal wall stresses on aneurysms (n = 204) were 326 [standard deviation (SD): 61.7], 246 (SD: 63.4) and 195 (SD: 38.7) kPa in sinuses of Valsalva, sinotubular junction (STJ) and ascending aorta (AscAo), respectively, with significant differences between AscAo and both sinuses (P < 0.001) and STJ (P < 0.001). Peak circumferential wall stresses were 416 (SD: 85.1), 501 (SD: 119) and 340 (SD: 57.6) kPa for sinuses, STJ and AscAo, respectively, with significant differences between AscAo and both sinuses (P < 0.001) and STJ (P < 0.001). CONCLUSIONS: Circumferential and longitudinal wall stresses were greater in the aortic root than AscAo on aneurysm patients with a TAV. Aneurysm wall stress magnitudes and distribution relative to respective regional wall strength could improve understanding of aortic regions at greater risk of dissection in a particular patient.
Subject(s)
Aortic Aneurysm, Thoracic , Aortic Aneurysm , Aorta , Aortic Aneurysm/complications , Aortic Aneurysm/etiology , Aortic Aneurysm, Thoracic/diagnostic imaging , Aortic Aneurysm, Thoracic/etiology , Aortic Valve/diagnostic imaging , Humans , Stress, Mechanical , Tricuspid Valve/diagnostic imagingABSTRACT
OBJECTIVE: Ascending thoracic aortic aneurysms carry a risk of acute type A dissection. Elective repair guidelines are designed around size thresholds, but the 1-dimensional parameter of maximum diameter cannot predict acute events in small aneurysms. Biomechanically, dissection can occur when wall stress exceeds strength. Patient-specific ascending thoracic aortic aneurysm wall stresses may be a better predictor of dissection. Our aim was to compare wall stresses in tricuspid aortic valve-associated ascending thoracic aortic aneurysms based on diameter. METHODS: Patients with tricuspid aortic valve-associated ascending thoracic aortic aneurysm and diameter 4.0 cm or greater (n = 221) were divided into groups by 0.5-cm diameter increments. Three-dimensional geometries were reconstructed from computed tomography images, and finite element models were developed taking into account prestress geometries. A fiber-embedded hyperelastic material model was applied to obtain longitudinal and circumferential wall stress distributions under systolic pressure. Median stresses with interquartile ranges were determined. The Kruskal-Wallis test was used for comparisons between size groups. RESULTS: Peak longitudinal wall stresses for tricuspid aortic valve-associated ascending thoracic aortic aneurysm were 290 (265-323) kPa for size 4.0 to 4.4 cm versus 330 (296-359) kPa for 4.5 to 4.9 cm versus 339 (320-373) kPa for 5.0 to 5.4 cm versus 318 (293-351) kPa for 5.5 to 5.9 cm versus 373 (363-449) kPa for 6.0 cm or greater (P = 8.7e-8). Peak circumferential wall stresses were 460 (421-543) kPa for size 4.0 to 4.4 cm versus 503 (453-569) kPa for 4.5 to 4.9 cm versus 549 (430-588) kPa for 5.0 to 5.4 cm versus 540 (471-608) kPa for 5.5 to 5.9 cm versus 596 (506-649) kPa for 6.0 cm or greater (P = .0007). CONCLUSIONS: Circumferential and longitudinal wall stresses are higher as diameter increases, but size groups had large overlap of stress ranges. Wall stress thresholds based on aneurysm wall strength may be a better predictor of patient-specific risk of dissection than diameter in small ascending thoracic aortic aneurysms.
Subject(s)
Aortic Aneurysm, Thoracic , Aorta , Aortic Aneurysm, Thoracic/diagnostic imaging , Aortic Aneurysm, Thoracic/etiology , Aortic Aneurysm, Thoracic/surgery , Aortic Valve/diagnostic imaging , Aortic Valve/surgery , Humans , Tricuspid Valve/diagnostic imagingABSTRACT
In recent years the most studied carbon allotrope has been graphene, due to the outstanding properties that this two-dimensional material exhibits; however, it turns out to be a difficult material to produce, pattern, and transfer to a device substrate without contamination. Carbon microelectromechanical systems are a versatile technology used to create nano/micro carbon devices by pyrolyzing a patterned photoresist, making them highly attractive for industrial applications. Furthermore, recent works have reported that pyrolytic carbon material can be graphitized by the diffusion of carbon atoms through a transition metal layer. In this work we take advantage of the latter two methods in order to produce multilayer graphene by improving the molecular ordering of photolithographically-defined pyrolytic carbon microstructures, through the diffusion (annealing) of carbon atoms through nickel, and also to eliminate any further transfer process to a device substrate. The allotropic nature of the final carbon microstructures was inspected by Raman spectroscopy (AverageID/IGof 0.2348 ± 0.0314) and TEM clearly shows well-aligned lattice planes of 3.34 Å fringe separation. These results were compared to measurements made on pyrolytic carbon (AverageID/IGof 0.9848 ± 0.0235) to confirm that our method is capable of producing a patterned multilayer graphene material directly on a silicon substrate.
ABSTRACT
BACKGROUND: Hepatic cyst disease is often asymptomatic, but treatment is warranted if patients experience symptoms. We describe our management approach to these patients and review the technical nuances of the laparoscopic approach. METHODS: Medical records were reviewed for operative management of hepatic cysts from 2012 to 2019 at a single, tertiary academic medical center. RESULTS: Fifty-three patients (39 female) met the inclusion criteria with median age at presentation of 65 years. Fifty cases (94.3%) were performed laparoscopically. Fourteen patients carried diagnosis of polycystic liver disease. Dominant cyst diameter was median 129 mm and located within the right lobe (30), left lobe (17), caudate (2), or was bilobar (4). Pre-operative concern for biliary cystadenoma/cystadenocarcinoma existed for 7 patients. Operative techniques included fenestration (40), fenestration with decapitation (7), decapitation alone (3), and excision (2). Partial hepatectomy was performed in conjunction with fenestration/decapitation for 15 cases: right sided (7), left sided (7), and central (1). One formal left hepatectomy was performed in a polycystic liver disease patient. Final pathology yielded simple cyst (52) and one biliary cystadenoma. Post-operative complications included bile leak (2), perihepatic fluid collection (1), pleural effusion (1), and ascites (1). At median 7.1-month follow-up, complete resolution of symptoms occurred for 34/49 patients (69.4%) who had symptoms preoperatively. Reintervention for cyst recurrence occurred for 5 cases (9.4%). CONCLUSIONS: Outcomes for hepatic cyst disease are described with predominantly laparoscopic approach, approach with minimal morbidity, and excellent clinical results.
Subject(s)
Cysts , Laparoscopy , Liver Diseases , Cysts/diagnostic imaging , Cysts/surgery , Female , Hepatectomy , Humans , Liver Diseases/surgery , Neoplasm Recurrence, LocalABSTRACT
Experimental studies of the electronic structure of excess electrons in liquids-archetypal quantum solutes-have been largely restricted to very dilute electron concentrations. We overcame this limitation by applying soft x-ray photoelectron spectroscopy to characterize excess electrons originating from steadily increasing amounts of alkali metals dissolved in refrigerated liquid ammonia microjets. As concentration rises, a narrow peak at ~2 electron volts, corresponding to vertical photodetachment of localized solvated electrons and dielectrons, transforms continuously into a band with a sharp Fermi edge accompanied by a plasmon peak, characteristic of delocalized metallic electrons. Through our experimental approach combined with ab initio calculations of localized electrons and dielectrons, we obtain a clear picture of the energetics and density of states of the ammoniated electrons over the gradual transition from dilute blue electrolytes to concentrated bronze metallic solutions.
ABSTRACT
BACKGROUND: Bicuspid aortic valve-associated ascending thoracic aortic aneurysms (BAV-aTAAs) carry a risk of acute type A dissection. Biomechanically, dissection may occur when wall stress exceeds wall strength. Our aim was to develop patient-specific computational models of BAV-aTAAs to determine magnitudes of wall stress by anatomic regions. METHODS: Patients with BAV-aTAA diameter greater than 4.5 cm (n = 41) underwent electrocardiogram-gated computed tomography angiography. Three-dimensional aneurysm geometries were reconstructed after accounting for prestress and loaded to systemic pressure. Finite element analyses were performed with fiber-embedded hyperelastic material model using LS-DYNA software (LSTC Inc, Livermore, CA) to obtain wall stress distributions. The 99th percentile longitudinal and circumferential stresses were determined at systole. RESULTS: The 99th percentile longitudinal wall stresses for BAV-aTAAs at sinuses of Valsalva, sinotubular junction (STJ), and ascending aorta were 361 ± 59.8 kPa, 295 ± 67.2 kPa, and 224 ± 37.6 kPa, respectively, with significant differences in ascending aorta vs sinuses (P< 1 × 10-13) and STJ (P < 1 × 10-6). The 99th percentile circumferential wall stresses were 474 ± 88.2 kPa, 634 ± 181.9 kPa, and 381 ± 54.0 kPa for sinuses, the STJ, and the ascending aorta, respectively, with significant differences in the ascending aorta vs sinuses (P = .002) and STJ (P < 1 × 10-13). CONCLUSIONS: Wall stresses, both circumferential and longitudinal, were greater in the aortic root, sinuses, and STJ than in the ascending aorta on BAV-aTAAs. These results fill a fundamental knowledge gap regarding biomechanical stress distribution in BAV-aTAA patients, which when related to wall strength may provide prognostication of aTAA dissection risk by patient-specific modeling.
Subject(s)
Aortic Aneurysm, Thoracic/diagnostic imaging , Aortic Aneurysm, Thoracic/physiopathology , Aortic Valve/abnormalities , Heart Valve Diseases/diagnostic imaging , Heart Valve Diseases/physiopathology , Aged , Aortic Aneurysm, Thoracic/etiology , Aortic Valve/diagnostic imaging , Aortic Valve/physiopathology , Bicuspid Aortic Valve Disease , Blood Pressure/physiology , Computed Tomography Angiography , Electrocardiography , Female , Finite Element Analysis , Heart Valve Diseases/complications , Humans , Male , Middle Aged , Models, Cardiovascular , Patient-Specific Modeling , Shear Strength/physiology , Tensile Strength/physiologyABSTRACT
AIM: We seek to characterize how faster tumour shrinkage rate (k) can lead to paradoxically shorter Response Evaluation Criteria in Solid Tumors (RECIST) time to progression ('TTP20' - tumour size exceeding its minimum by 5 mm and 20%) [1] and, therefore, progression-free survival (PFS). Specifically, we investigate under what conditions this paradoxical behaviour occurs, what fraction of patients satisfy these conditions, whether this phenomenon can invert population-level PFS hazard ratio, and consistency of an alternative time-to-event benefit metric with k. METHODS: We use a mathematical model treating tumour burden as decreasing drug-sensitive and increasing drug-resistant cell subpopulations. We fit this model to data from several clinical trials with different indications [2]. We simulated a more effective treatment and recorded whether patients' TTP20 increased or decreased. We performed a study-level analysis to compare the relationship of speed and depth of response with TTP20 for both the administered 'control' and simulated 'more effective' drug. We propose and test an alternative benefit metric: the model-projected time that tumour size reaches 120% of baseline (TTB120). RESULTS: Depending on indication, 3-27% of patients are estimated to have a paradoxically inverse relationship between k and TTP20. Simulated head-to-head studies show that TTP20-based PFS can favour the less effective drug. In contrast, TTB120 always favours the more effective drug. CONCLUSION: We demonstrate the paradoxical behaviour of RECIST TTP20 - as an exemplar of percent-change-from-nadir based cancer progression criterion - both in theory and in observed patient data at the individual and trial level. We propose an alternative tumour size-based criterion (TTB120) that is directionally consistent with tumour shrinkage rate.