Smart Electrode Surfaces by Electrolyte Immobilization for Electrocatalytic CO2 Conversion.

The activity and selectivity of molecular catalysts for the electrochemical CO2 reduction reaction (CO2RR) are influenced by the induced electric field at the electrode/electrolyte interface. We present here a novel electrolyte immobilization method to control the electric field at this interface by positively charging the electrode surface with an imidazolium cation organic layer, which significantly favors CO2 conversion to formate, suppresses hydrogen evolution reaction, and diminishes the operating cell voltage. Those results are well supported by our previous DFT calculations studying the mechanistic role of imidazolium cations in solution for CO2 reduction to formate catalyzed by a model molecular catalyst. This smart electrode surface concept based on covalent grafting of imidazolium on a carbon electrode is successfully scaled up for operating at industrially relevant conditions (100 mA cm-2) on an imidazolium-modified carbon-based gas diffusion electrode using a flow cell configuration, where the CO2 conversion to formate process takes place in acidic aqueous solution to avoid carbonate formation and is catalyzed by a model molecular Rh complex in solution. The formate production rate reaches a maximum of 4.6 gHCOO- m-2 min-1 after accumulating a total of 9000 C of charge circulated on the same electrode. Constant formate production and no significant microscopic changes on the imidazolium-modified cathode in consecutive long-term CO2 electrolysis confirmed the high stability of the imidazolium organic layer under operating conditions for CO2RR.

Electrocatalytic Conversion of CO2 to Formate at Low Overpotential by Electrolyte Engineering in Model Molecular Catalysis.

An electrolyte engineering strategy was developed for CO2 reduction into formate with a model molecular catalyst, [Rh(bpy)(Cp*)Cl]Cl, by modifying the solvent (organic or aqueous), the proton source (H2 O or acetic acid), and the electrode/solution interface with imidazolium- and pyrrolidinium-based ionic liquids (ILs). Experimental and theoretical density functional theory investigations suggested that π+ -π interactions between the imidazolium-based IL cation and the reduced bipyridine ligand of the catalyst improved the efficiency of the CO2 reduction reaction (CO2 RR) by lowering the overpotential, while granting partial suppression of the hydrogen evolution reaction. This allowed tuning the selectivity towards formate, reaching for this catalyst an unprecedented faradaic efficiency (FEHCOO -) ≥90 % and energy efficiency of 66 % in acetonitrile solution. For the first time, relevant CO2 conversion to formic acid/formate was reached at low overpotential (0.28 V) using a homogeneous catalyst in acidic aqueous solution (pH=3.8). These results open up a new strategy based on electrolyte engineering for enhancing carbon balance in CO2 RR.

Carbon Dioxide Reduction: A Bioinspired Catalysis Approach.

While developed in a number of directions, bioinspired catalysis has been explored only very recently for CO2 reduction, a challenging reaction of prime importance in the context of the energetic transition to be built up. This approach is particularly relevant because nature teaches us that CO2 reduction is possible, with low overpotentials, high rates, and large selectivity, and gives us unique clues to design and discover new interesting molecular catalysts. Indeed, on the basis of our relatively advanced understanding of the structures and mechanisms of the active sites of fascinating metalloenzymes such as formate dehydrogenases (FDHs) and CO dehydrogenases (CODHs), it is possible to design original, active, selective, and stable molecular catalysts using the bioinspired approach. These metalloenzymes use fascinating metal centers: in FDHs, a Mo(W) mononuclear ion is coordinated by four sulfur atoms provided by a specific organic ligand, molybdopterin (MPT), containing a pyranopterin heterocycle (composed of a pyran ring fused with a pterin unit) and two sulfhydryl groups for metal chelation; in CODHs, catalytic activity depends on either a unique nickel-iron-sulfur cluster or a dinuclear Mo-Cu complex in which the Mo ion is chelated by an MPT ligand. As a consequence, the novel class of catalysts, designed by bioinspiration, consists of mononuclear Mo, W, and Ni and as well as dinuclear Mo-Cu and Ni-Fe complexes in which the metal ions are coordinated by sulfur ligands, more specifically, dithiolene chelates mimicking the natural MPT cofactor. In general, their activity is evaluated in electrochemical systems (cyclic voltammetry and bulk electrolysis) or in photochemical systems (in the presence of a photosensitizer and a sacrificial electron donor) in solution. This research is multidisciplinary because it implies detailed biochemical, functional, and structural characterization of the inspiring enzymes together with synthetic organic and organometallic chemistry and molecular catalysis studies. The most important achievements in this direction, starting from the first report of a catalytically active biomimetic bis-dithiolene-Mo complex in 2015, are discussed in this Account, highlighting the challenging issues associated with synthesis of such sophisticated ligands and molecular catalysts as well as the complexity of reaction mechanisms. While the very first active biomimetic catalysts require further improvement, in terms of performance, they set the stage in which molecular chemistry and enzymology can synergistically cooperate for a better understanding of why nature has selected these sites and for developing highly active catalysts.

Structure-directing role of immobilized polyoxometalates in the synthesis of porphyrinic Zr-based metal-organic frameworks.

We evidence the structure-directing role of the PW12O403- polyoxometalate in porphyrinic MOF synthesis whereby it promotes the formation of the kinetic topology. Its immobilization into the MOF is successfully achieved at a high temperature yielding the kinetic MOF-525/PCN-224 phases, while prohibiting the formation of the thermodynamic MOF-545 product. A combined experimental/theoretical approach uses differential PDF and DFT calculations along with solid-state NMR to show the structural integrity of the POM and its location next to the Zr-based nodes.

Co-immobilization of a Rh Catalyst and a Keggin Polyoxometalate in the UiO-67 Zr-Based Metal-Organic Framework: In Depth Structural Characterization and Photocatalytic Properties for CO2 Reduction.

The Keggin-type polyoxometalate (POM) PW12O403- and the catalytic complex Cp*Rh(bpydc)Cl2 (bpydc = 2,2'-bipyridine-5,5'-dicarboxylic acid) were coimmobilized in the Zr(IV) based metal organic framework UiO-67. The POM is encapsulated within the cavities of the MOF by in situ synthesis, and then, the Rh catalytic complex is introduced by postsynthetic linker exchange. Infrared and Raman spectroscopies, 31P and 13C MAS NMR, N2 adsorption isotherms, and X-ray diffraction indicate the structural integrity of all components (POM, Rh-complex and MOF) within the composite of interest (PW12,Cp*Rh)@UiO-67. DFT calculations identified two possible locations of the POM in the octahedral cavities of the MOF: one at the center of a UiO-67 pore with the Cp*Rh complex pointing toward an empty pore and one off-centered with the Cp*Rh pointing toward the POM. 31P-1H heteronuclear (HETCOR) experiments ascertained the two environments of the POM, equally distributed, with the POM in interaction either with the Cp* fragment or with the organic linker. In addition, Pair Distribution Function (PDF) data were collected on the POM@MOF composite and provided key evidence of the structural integrity of the POM once immobilized into the MOF. The photocatalytic activity of the (PW12,Cp*Rh)@UiO-67 composite for CO2 reduction into formate and hydrogen were evaluated. The formate production was doubled when compared with that observed with the POM-free Cp*Rh@UiO-67 catalyst and reached TONs as high as 175 when prepared as thin films, showing the beneficial influence of the POM. Finally, the stability of the composite was assessed by means of recyclability tests. The combination of XRD, IR, ICP, and PDF experiments was essential in confirming the integrity of the POM, the catalyst, and the MOF after catalysis.

Thin Films of Fully Noble Metal-Free POM@MOF for Photocatalytic Water Oxidation.

P2W18Co4@MOF-545, which contains the sandwich-type polyoxometalate (POM) [(PW9O34)2Co4(H2O)2]10- (P2W18Co4) immobilized in the porphyrinic metal-organic framework (MOF), MOF-545, is a "three-in-one" (porosity + light capture + catalysis) heterogeneous photosystem for the oxygen-evolution reaction (OER). Thin films of this composite were synthesized on transparent and conductive indium tin oxide (ITO) supports using electrophoretic (EP) or drop-casting (DC) methods, thus providing easy-to-use devices. Their electro- and photocatalytic activities for OER were investigated. Remarkably, both types of films exhibit higher turnover numbers (TONs) than the original bulk material previously studied as a suspension for the photocatalytic OER, with TONs after 2 h equal to 1600 and 403 for DC and EP films, respectively, compared to 70 for the suspension. This difference of catalytic activities is related to the proportion of efficiently illuminated crystallites, whereby a DC thin film offers the largest proportion of POM@MOF crystallites exposed to light due to its lower thickness when compared to an EP film or crystals in suspension. Such devices can be easily recycled by simply removing them from the reaction medium and washing them before reuse. The films were fully characterized with extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES) spectroscopies, Raman, scanning electron microscopy, and electrochemistry before and after catalysis. The combination of all of these techniques shows the stability of both the POM and the MOF within the composite upon water-oxidation reaction.

An unprecedented {Ni14SiW9} hybrid polyoxometalate with high photocatalytic hydrogen evolution activity.

A unique polyoxometalate complex made up of a tetradecanuclear nickel bisphosphonate cluster capping a {SiW9} unit has been characterized. This stable compound exhibits a high hydrogen evolution reaction photocatalytic activity under visible light irradiation via a reductive quenching mechanism.

A Fully Noble Metal-Free Photosystem Based on Cobalt-Polyoxometalates Immobilized in a Porphyrinic Metal-Organic Framework for Water Oxidation.

The sandwich-type polyoxometalate (POM) [(PW9O34)2Co4(H2O)2]10- was immobilized in the hexagonal channels of the Zr(IV) porphyrinic MOF-545 hybrid framework. The resulting composite was fully characterized by a panel of physicochemical techniques. Calculations allowed identifying the localization of the POM in the vicinity of the Zr6 clusters and porphyrin linkers constituting the MOF. The material exhibits a high photocatalytic activity and good stability for visible-light-driven water oxidation. It thus represents a rare example of an all-in-one fully noble metal-free supramolecular heterogeneous photocatalytic system, with the catalyst and the photosensitizer within the same porous solid material.

A cobalt complex with a bioinspired molybdopterin-like ligand: a catalyst for hydrogen evolution.

Cobalt dithiolene complexes are a new class of H2-evolving catalysts. Here we describe the preparation, the structure and the catalytic activity of an original cobalt complex using a bioinspired ligand, a quinoxaline-pyran-fused dithiolene derivative (qpdt(2-)) that mimics the molybdopterin cofactor present in the active sites of formate dehydrogenases. This complex displays very good activity for electrochemical proton reduction under weak acid conditions in terms of turnover frequency, faradic yields and stability. Density functional theory calculations show that protonation of a nitrogen atom of the ligand decreases overpotentials by 520 mV and H2 formation proceeds via protonation of an intermediate Co-H hydride, with an adjacent S atom of the dithiolene ligand serving as a proton relay.

Synthesis and Reactivity of a Bio-inspired Dithiolene Ligand and its Mo Oxo Complex.

An original synthesis of the fused pyranoquinoxaline dithiolene ligand qpdt(2-) is discussed in detail. The most intriguing step is the introduction of the dithiolene moiety by Pd-catalyzed carbon-sulfur coupling. The corresponding Mo(IV)O complex (Bu4N)2 [MoO(qpdt)2] (2) underwent reversible protonation in a strongly acidic medium and remained stable under anaerobic conditions. Besides, 2 was found to be very sensitive towards oxygen, as upon oxidation it formed a planar dithiin derivative. Moreover, the qpdt(2-) ligand in the presence of [MoCl4 (tBuNC)2] formed a tetracyclic structure. The products resulting from the unique reactivity of qpdt(2-) were characterized by X-ray diffraction, mass spectrometry, NMR spectroscopy, UV/Vis spectroscopy, and electrochemistry. Plausible mechanisms for the formation of these products are also proposed.

Surface Initiated Immobilization of Molecules Contained in an Ionic Liquid Framework.

A simple and general route for the immobilization of molecules containing ionic liquids framework was described. The proposed approach is inspired from the classical synthesis of ionic liquid and labeled surface-initiated synthesis of molecules bearing ionic liquid components. In the first step, bromide end layer was electrochemically grafted onto the electrode surface followed by its reaction with imidazole derivatives. The generated modified materials were characterized by electrochemistry and by X-ray photoelectron spectroscopy (XPS). As a result, molecule-based ionic liquids were successfully attached onto electrode material. The possibility to perform an anion-exchange reaction within the layer was demonstrated. Furthermore, the proposed surface functionalization approach was successfully performed without requiring the synthesis of any intermediate. The generated structures provide multifunctional systems containing ions, immobilized cation and mobile anion, and redox species.

A Bioinspired Molybdenum Complex as a Catalyst for the Photo- and Electroreduction of Protons.

A molybdenum-dithiolene-oxo complex was prepared as a model of some active sites of Mo/W-dependent enzymes. The ligand, a quinoxaline-pyran-fused dithiolene, mimics molybdopterin present in these active sites. For the first time, this type of complex was shown to be active as a catalyst for the photoreduction of protons with excellent turnover numbers (500) and good stability in aqueous/organic media and for the electroreduction of protons in acetonitrile with remarkable rate constants (1030 s(-1) at -1.3 V versus Ag/AgCl). DFT calculations provided insight into the catalytic cycle of the reaction, suggesting that the oxo ligand plays a key role in proton exchange. These results provide a basis to optimize this new class of H2 -evolving catalysts.

Bioinspired Tungsten Dithiolene Catalysts for Hydrogen Evolution: A Combined Electrochemical, Photochemical, and Computational Study.

Bis(dithiolene)tungsten complexes, W(VI)O2 (L = dithiolene)2 and W(IV)O (L = dithiolene)2, which mimic the active site of formate dehydrogenases, have been characterized by cyclic voltammetry and controlled potential electrolysis in acetonitrile. They are shown to be able to catalyze the electroreduction of protons into hydrogen in acidic organic media, with good Faradaic yields (75-95%) and good activity (rate constants of 100 s(-1)), with relatively high overpotentials (700 mV). They also catalyze proton reduction into hydrogen upon visible light irradiation, in combination with [Ru(bipyridine)3](2+) as a photosensitizer and ascorbic acid as a sacrificial electron donor. On the basis of detailed DFT calculations, a reaction mechanism is proposed in which the starting W(VI)O2 (L = dithiolene)2 complex acts as a precatalyst and hydrogen is further formed from a key reduced W-hydroxo-hydride intermediate.

Screen-printed graphite macroelectrodes for the direct electron transfer of cytochrome c: a deeper study of the effect of pH on the conformational states, immobilization and peroxidase activity.

The direct electron transfer of cytochrome c has been studied at screen-printed graphite macroelectrodes without recourse to mediators or the need for any electrode pre-treatment as is commonly employed within the literature. A wide range of pH values from 2.0 to 11.0 have been explored upon the electrochemical response of cytochrome c and different voltammetric signatures have been observed. The direct electron transfer of the alkaline transition of cytochrome c was found impeded within alkaline media leading to either an irreversible redox process or even no voltammetric responses. In acidic aqueous media the electrochemical process is observed to undergo a mixed diffusion and adsorption controlled process rather than a purely diffusional process of the native conformation as observed at pH 7.0. Interestingly, at pH 3.5 a new conformational state is revealed in cooperation with the native conformation. The immobilization of the protein was satisfactorily obtained using a simple method by cycling the protein at specific solution pH values allowing amperometric responses to be obtained and gives rise to useful pseudo-peroxidase activity for sensing H2O2. Apparent Michaelis-Menten constant values (Km) were calculated via the Lineweaver-Burk method with deduced values of 25 ± 4, 98 ± 12 and 230 ± 30 mM, respectively for pH values of 2.0, 3.0 and 7.0. Such work is important for those utilising cytochrome c in bio-electrochemical and related applications.

Exploring the electrochemical performance of graphitic paste electrodes: graphene vs. graphite.

We report the fabrication, characterisation (SEM, TEM, XPS and Raman spectroscopy) and electrochemical implementation of a graphene paste electrode. The paste electrodes utilised are constructed by simply mixing graphene with mineral oil (which acts as a binder) prior to loading the resultant paste into a piston-driven polymeric-tubing electrode-shell, where this electrode configuration allows for rapid renewal of the electrode surface. The fabricated paste electrode is electrochemically characterised using both inner-sphere and outer-sphere redox probes, namely potassium ferrocyanide(ii), hexaammine-ruthenium(iii) chloride and hexachloroiridate(iii), in addition to the biologically relevant and electroactive analytes, l-ascorbic acid (AA) and uric acid (UA). Comparisons are made with a graphite paste alternative and the benefits of graphene implementation as a paste electrode within electrochemistry are explored, as well as the characterisation of their electroanalytical performances. We reveal no observable differences in the electrochemical performance and thus suggest that there are no advantages of using graphene over graphite in the fabrication of paste electrodes. Such work is highly important and informative for those working in the field of electroanalysis where electrochemistry can provide portable, rapid, reliable and accurate sensing protocols (bringing the laboratory into the field), with particular relevance to those searching for new electrode materials.

Electrochemical nitration of myoglobin at tyrosine 103: structure and stability.

Nitration in proteins is a physiologically relevant process and the formation of 3-nitrotyrosine was first proposed as an in vivo marker of the production of reactive nitrogen species in oxidative stress. No studies have been published on structural changes associated with nitration of myoglobin. To address this deficiency the electrochemical nitration of equine skeletal muscle (Mb) at amino acid tyrosine 103 has been investigated for the evaluation and characterization of structural and thermal stability changes. Y103 in Mb is one of the most exposed tyrosine residues and it is also close to the heme group. Effects of Y103 nitration on the secondary and tertiary structure of Y103 have been studied by UV-Vis, circular dichroism, fluorescence and NMR spectroscopy and by electrochemical studies. At physiological pH, subtle changes were observed involving slight loosening of the tertiary structure and conformational exchange processes. Thermal stability of the nitrated protein was found to be reduced by 5 °C for the nitrated Mb compared with the native Mb at physiological pH. Altogether, NMR data indicates that nitrated Mb has a very similar tertiary structure to that of native Mb, although with a slightly open conformation.

Electrochemistry of Q-graphene.

A newly synthesised type of graphene, Q-Graphene, has been physically and electrochemically characterised with Scanning and Transmission Electron Microscopy (SEM, TEM), X-ray Photoelectron Spectroscopy (XPS) and Cyclic Voltammetry (CV). Interpretation of SEM, TEM and XPS data reveal the material to consist of hollow carbon nanospheres of multi-layer graphene (viz. graphite), which exhibit a total oxygen content of ca. 36.0% (atomic weight via XPS). In addition to the carbon structures present, spherical magnesium oxide particles of ≤50 nm in diameter are abundantly present in the sample (ca. 16.2%). Interestingly, although the TEM/SEM images show macroporous carbon structures, Raman spectroscopy shows peaks typically characteristic of graphene, which suggests the material is highly heterogeneous and consists of many types of carbon allotropes. Q-Graphene is electrochemically characterised using both inner-sphere and outer-sphere electrochemical redox probes, namely potassium ferrocyanide(II), hexaammine-ruthenium(III) chloride and hexachloroiridate(III), in addition to the biologically relevant and electroactive analytes, norepinephrine, ß-nicotinamide adenine dinucleotide (NADH) and l-ascorbic acid. The electrochemical response of Q-Graphene is benchmarked against edge plane- and basal plane-pyrolytic graphite (EPPG and BPPG respectively), pristine graphene and graphite alternatives. Q-Graphene is found to exhibit fast electron transfer kinetics, likely due to its high proportion of folded edges and surface defects, exhibiting a response similar to that of EPPG - which exhibits fast electron transfer rates due to the high proportion of edge plane sites it possesses. Furthermore, we demonstrate that the specific oxygen content plays a pivotal role in dictating the observed electrochemical response, which is analyte dependant. Consequently there is potential for this new member of the graphene family to be beneficially utilised in various electrochemical applications.

Graphene electrochemical supercapacitors: the influence of oxygen functional groups.

We have critically compared graphene and graphene oxide as materials for utilisation as supercapacitors indicating that the former exhibits a larger capacitance over the latter which has implications for those fabricating supercapacitors.

CVD graphene electrochemistry: biologically relevant molecules.

We investigate the electrochemical properties of CVD grown graphene towards the detection of various biologically prevalent analytes including l-ascorbic acid (AA), dopamine hydrochloride (DA), ß-nicotinamide adenine dinucleotide (NADH), uric acid (UA) and epinephrine (EP). We find that the observed electrochemical response of the CVD-graphene towards these select analytes does not originate from the graphene, however, from various other contributions including the presence of 'graphitic islands' on the surface of the CVD-graphene which dominate its electrochemistry. In the systems studied within, it appears at best, CVD-graphene acts akin to that of an edge plane pyrolytic graphite (EPPG) electrode constructed from highly ordered pyrolytic graphite. However, in other cases, the response of the CVD-graphene is worse than that of an EPPG electrode, which is likely due to the low O/C ratio.

Screen printed graphite macroelectrodes for the direct electron transfer of cytochrome c.

We report the direct electrochemistry of cytochrome c at screen printed graphite electrodes which exhibits quasi-reversible voltammetric responses without the need for any chemical or electrochemical pre-treatment, use of mediators or nanomaterials. Through voltammetric studies and X-ray photoelectron spectroscopy (XPS) it is shown that carbonyl and carboxylic surface oxygenated species likely residing at edge plane like- sites/defects of the graphite comprising the screen printed electrodes are responsible for the favourable interaction of the cytochrome c with that of the screen printed electrochemical sensing platform.