An organic-organometallic CO-releasing material comprising 4,4'-bipyridine and molybdenum subcarbonyl building blocks.

Over the past two decades, following the discovery of the important biological roles of carbon monoxide (CO), metal carbonyl complexes have been intensively studied as CO-releasing molecules (CORMs) for therapeutic applications. To improve the properties of "bare" low molecular weight CORMs, attention has been drawn to conjugating CORMs with macromolecular and inorganic scaffolds to produce CO-releasing materials (CORMAs) capable of storing and delivering large payloads of the gasotransmitter. A significant obstacle is to obtain CORMAs that retain the beneficial features of the parent CORMs. In the present work, a crystalline metal-organic framework (MOF) formulated as Mo(CO)3(4,4'-bipyridine)3/2 (Mobpy), with a structure based on Mo(CO)3 metallic nodes and bipyridine linkers, has been prepared in near quantitative yield by a straightforward reflux method, and found to exhibit CO-release properties that mimic those typically observed for molybdenum carbonyl CORMs. Mobpy was characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), FT-IR, FT-Raman and diffuse reflectance (DR) UV-vis spectroscopies, and 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR. The release of CO from Mobpy was studied by the deoxy-myoglobin (deoxy-Mb)/carbonmonoxy-myoglobin (MbCO) UV-vis assay. Mobpy liberates CO upon contact with a physiological buffer in the dark, leading to a maximum released amount of 1.3-1.5 mmol g-1, after 1.5 h at 37 °C, with half-lives of 0.5-1.0 h (time to transfer 0.5 equiv. of CO to Mb). In the solid-state and under open air, Mobpy undergoes complete decarbonylation over a period of 42 days, corresponding to a theoretical CO-release of 7.25 mmol g-1.

Tricarbonyl-Pyrazine-Molybdenum(0) Metal-Organic Frameworks for the Storage and Delivery of Biologically Active Carbon Monoxide.

Metal-organic frameworks (MOFs) have high potential as nanoplatforms for the storage and delivery of therapeutic gasotransmitters or gas-releasing molecules. The aim of the present study was to open an investigation into the viability of tricarbonyl-pyrazine-molybdenum(0) MOFs as carbon monoxide-releasing materials (CORMAs). A previous investigation found that the reaction of Mo(CO)6 with excess pyrazine (pyz) in a sealed ampoule gave a mixture comprising a major triclinic phase with pyz-occupied hexagonal channels, formulated as fac-Mo(CO)3(pyz)3/2·1/2pyz (Mo-hex), and a minor dense cubic phase, formulated as fac-Mo(CO)3(pyz)3/2 (Mo-cub). In the present work, an open reflux method in toluene has been optimized for the large-scale synthesis of the pure Mo-cub phase. The crystalline solids Mo-hex and Mo-cub were characterized by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), FT-IR and FT-Raman spectroscopies, and 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR spectroscopy. The release of CO from the MOFs was studied by the deoxy-myoglobin (deoxy-Mb)/carbonmonoxy-myoglobin (MbCO) UV-vis assay. Mo-hex and Mo-cub release CO upon contact with a physiological buffer in the dark, delivering 0.35 and 0.22 equiv (based on Mo), respectively, after 24 h, with half-lives of 3-4 h. Both materials display high photostability such that the CO-releasing kinetics is not affected by irradiation of the materials with UV light. These materials are attractive as potential CORMAs due to the slow release of a high CO payload. In the solid-state and under open air, Mo-cub underwent almost complete decarbonylation over a period of 4 days, corresponding to a theoretical CO release of 10 mmol per gram of material.

Enhanced thermal and photo-stability of a para-substituted dicumyl ketone intercalated in a layered double hydroxide.

A ketodiacid, 4,4'-dicarboxylate-dicumyl ketone (3), has been intercalated into a Zn, Al layered double hydroxide (LDH) by a coprecipitation synthesis strategy. The structure and chemical composition of the resultant hybrid material (LDH-KDA3) were characterized by powder X-ray diffraction (PXRD), FT-IR, FT-Raman and solid-state 13C{1H} NMR spectroscopies, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), thermogravimetric analysis (TGA), and elemental analysis (CHN). PXRD showed that the dicarboxylate guest molecules assembled into a monolayer to give a basal spacing of 18.0 Å. TGA revealed that the organic guest starts to decompose at a significantly higher temperature (ca. 330°C) than that determined for the free ketodiacid (ca. 230°C). Photochemical experiments were performed to probe the photoreactivity of the ketoacid in the crystalline state, in solution, and as a guest embedded within the photochemically-inert LDH host. Irradiation of the bulk crystalline ketoacid results in photodecarbonylation and the exclusive formation of the radical-radical combination product. Solution studies employing the standard myoglobin (Mb) assay for quantification of released CO showed that the ketoacid behaved as a photoactivatable CO-releasing molecule for transfer of CO to heme proteins, although the photoreactivity was low. No photoinduced release of CO was found for the LDH system, indicating that molecular confinement enhanced the photo-stability of the hexasubstituted ketone. To better understand the behavior of 3 under irradiation, a more comprehensive study, involving excitation of this compound in DMSO-d6 followed by 1H NMR, UV-Vis and fluorescence spectroscopy, was undertaken and further rationalized with the help of time-dependent density functional theory (TDDFT) electronic quantum calculations. The photophysical study showed the formation of a less emissive compound (or compounds). New signals in the 1H NMR spectra were attributed to photoproducts obtained via Norrish type I α-cleavage decarbonylation and Norrish type II (followed by CH3 migration) pathways. TDDFT calculations predicted that the formation of a keto-enol system (via a CH3 migration step in the type II pathway) was highly favorable and consistent with the observed spectral data.

A hafnium-based metal-organic framework for the entrapment of molybdenum hexacarbonyl and the light-responsive release of the gasotransmitter carbon monoxide.

A carbon monoxide-releasing material (CORMA) has been prepared by inclusion of molybdenum hexacarbonyl in a hafnium-based metal-organic framework (MOF) with the UiO-66 architecture. Mo(CO)6 was adsorbed from solution to give supported materials containing 6.0-6.6 wt% Mo. As confirmed by powder X-ray diffraction (PXRD) and SEM coupled with energy dispersive X-ray spectroscopy, neither the crystallinity nor the morphology of the porous host was affected by the loading process. While the general shape of the N2 physisorption isotherms (77 K) did not change significantly after encapsulation of Mo(CO)6, the micropore volume decreased by ca. 20%. Thermogravimetric analysis of the as-prepared materials revealed a weight loss step around 160 °C associated with the decomposition of Mo(CO)6 to subcarbonyl species. Confirmation for the presence of encapsulated Mo(CO)6 complexes was provided by FT-IR and 13C{1H} cross-polarization magic-angle spinning NMR spectroscopies. To test the capability of these materials to behave as CORMAs and transfer CO to heme proteins, the standard myoglobin (Mb) assay was used. While stable in the dark, photoactivation with low-power UV light (365 nm) liberated CO from the encapsulated hexacarbonyl molecules in Mo(6.0)/UiO-66(Hf), leading to a maximum amount of 0.26 mmol CO released per gram of material. Under the simulated physiological conditions of the Mb assay (37 °C, pH 7.4 buffer), minimal leaching of molybdenum occurred, PXRD showed only slight amorphization, and FT-IR spectroscopy confirmed the high chemical stability of the MOF host.

A Molybdenum Trioxide Hybrid Decorated by 3-(1,2,4-Triazol-4-yl)adamantane-1-carboxylic Acid: A Promising Reaction-Induced Self-Separating (RISS) Catalyst.

3-(1,2,4-Triazol-4-yl)adamantane-1-carboxylic acid (tradcH), a heterobifunctional organic ligand in which carboxylic acid and 1,2,4-triazole groups are united through a rigid 1,3-adamantanediyl spacer, was employed for the synthesis of a MoVI oxide organic hybrid. The ligand crystallized from water as tradcH·H2O (1), possessing a two-dimensional hydrogen-bonding network, and from ethanol as a cyclic molecular solvate with the composition (tradcH)3·2EtOH (2). Treatment of tradcH with MoO3 under hydrothermal conditions afforded a new Mo trioxide hybrid, [MoO3(tradcH)]·H2O (3), which was structurally characterized. In 3, the molybdenum atoms form a polymeric zigzag chain of {µ2-O-MoO2}n which is supported by double triazole bridges, while the carboxylic acid termini are left uncoordinated. The coordination environment of the Mo centers appears as distorted cis-{MoN2O4} octahedra. The hybrid exhibits high thermal stability (up to 270 °C) and was employed for a relatively broad scope of catalytic oxidation reactions in the liquid phase. Its catalytic behavior may be compared to a reversible mutation, featuring the best sides of homogeneous and heterogeneous catalysis. The original solid material converts into soluble active species, and the latter revert to the original material upon completion of the catalytic reaction, precipitating and allowing straightforward catalyst separation/reuse (like a heterogeneous catalyst). This catalyst was explored for a chemical reaction scope covering sulfoxidation, oxidative alcohol dehydrogenation, aldehyde oxidation, and olefin epoxidation, using hydrogen peroxide as an eco-friendly oxidant that gives water as a coproduct.

A hydrogen-bonded assembly of cucurbit[6]uril and [MoO2Cl2(H2O)2] with catalytic efficacy for the one-pot conversion of olefins to alkoxy products.

The reaction of the macrocyclic cavitand cucurbit[6]uril (CB[6]) and the diaqua complex [MoO2Cl2(H2O)2] in hydrochloric acid solution gave a water insoluble supramolecular compound with the general composition 2[MoO2Cl2(H2O)2]·CB[6]·xH2O·yHCl·z(CH3COCH3) (2). Single crystal X-ray diffraction (XRD) analysis revealed the presence of barrel-shape supramolecular entities, {CB[6]·10(H2O)}, aligned in layers which are shifted relative to adjacent layers to form a brick-like pattern. The CB[6]/water hydrogen-bonded entities further engage in intermolecular interactions with water, HCl and [MoO2Cl2(H2O)2] molecules to form a three-dimensional (3D) framework. Compound 2 was characterised by thermogravimetric analysis (TGA), IR and Raman vibrational spectroscopy, and 13C{1H} CP MAS NMR. The reference complex [MoO2Cl2(H2O)2]·(diglyme)2 (1) and compound 2 were studied for the oxidative catalytic conversion of olefins (cis-cyclooctene, cyclohexene and styrene) with aqueous H2O2 as oxidant. Using alcohols as solvents, 2 was employed in a one-pot two-stage strategy for converting olefins to alkoxy products, which involves oxidation (with H2O2) and acid chemistry. Mechanistic studies were carried out using different intermediates as substrates, and the type of solvent and substrate scope were investigated. The results demonstrated the ability of the CB[6]/MoVI supramolecular adduct to function as an acid-oxidation multifunctional catalyst, and its recovery and reuse via relatively simple procedures.

Interactions and Supramolecular Organization of Sulfonated Indigo and Thioindigo Dyes in Layered Hydroxide Hosts.

Supramolecularly organized host-guest systems have been synthesized by intercalating water-soluble forms of indigo (indigo carmine, IC) and thioindigo (thioindigo-5,5'-disulfonate, TIS) in zinc-aluminum-layered double hydroxides (LDHs) and zinc-layered hydroxide salts (LHSs) by coprecipitation routes. The colors of the isolated powders were dark blue for hybrids containing only IC, purplish blue or dark lilac for cointercalated samples containing both dyes, and ruby/wine for hybrids containing only TIS. The as-synthesized and thermally treated materials were characterized by Fourier transform infrared, Fourier transform Raman, and nuclear magnetic resonance spectroscopies, powder X-ray diffraction, scanning electron microscopy, and elemental and thermogravimetric analyses. The basal spacings found for IC-LDH, TIS-LDH, IC-LHS, and TIS-LHS materials were 21.9, 21.05, 18.95, and 21.00 Å, respectively, with intermediate spacings being observed for the cointercalated samples that either decreased (LDHs) or increased (LHSs) with increasing TIS content. UV-visible and fluorescence spectroscopies (steady-state and time-resolved) were used to probe the molecular distribution of the immobilized dyes. The presence of aggregates together with the monomer units is suggested for IC-LDH, whereas for TIS-LDH, IC-LHS, and TIS-LHS, the dyes are closer to the isolated situation. Accordingly, while emission from the powder H2TIS is strongly quenched, an increment in the emission of about 1 order of magnitude was observed for the TIS-LDH/LHS hybrids. Double-exponential fluorescence decays were obtained and associated with two monomer species interacting differently with cointercalated water molecules. The incorporation of both TIS and IC in the LDH and LHS hosts leads to an almost complete quenching of the fluorescence, pointing to a very efficient energy transfer process from (fluorescent) TIS to (nonfluorescent) IC.

A Comparative Study of Molybdenum Carbonyl and Oxomolybdenum Derivatives Bearing 1,2,3-Triazole or 1,2,4-Triazoles in Catalytic Olefin Epoxidation.

The molybdenum(0)-carbonyl-triazole complexes [Mo(CO)3(L)3] [L = 1,2,3-triazole (1,2,3-trz) or 1,2,4-triazole (1,2,4-trz)] have been prepared and examined as precursors to molybdenum(VI) oxide catalysts for the epoxidation of cis-cyclooctene. Reaction of the carbonyl complexes with the oxidant tert-butyl hydroperoxide (TBHP) (either separately or in situ) gives oxomolybdenum(VI) hybrid materials that are proposed to possess one-dimensional polymeric structures in which adjacent oxo-bridged dioxomolybdenum(VI) moieties are further linked by bidentate bridging triazole (trz) ligands. A pronounced ligand influence on catalytic performance was found and the best result (quantitative epoxide yield within 1 h at 70 °C) was obtained with the 1,2,3-triazole oxomolybdenum(VI) hybrid. Both molybdenum oxide-triazole compounds displayed superior catalytic performance in comparison with the known hybrid materials [MoO3(trz)0.5], which have different structures based on organic-inorganic perovskite-like layers. With aqueous H2O2 as the oxidant instead of TBHP, all compounds were completely soluble and active. A pronounced ligand influence on catalytic performance was only found for the hybrids [MoO3(trz)0.5], and only the 1,2,4-trz compound displayed reaction-induced self-precipitation behavior. An insight into the type of solution species that may be involved in the catalytic processes with these compounds was obtained by separately treating [MoO3(1,2,4-trz)0.5] with excess H2O2, which led to the crystallization of the complex (NH4)1.8(H3O)0.2[Mo2O2(µ2-O)(O2)4(1,2,4-trz)]·H2O. The single-crystal X-ray investigation of this complex reveals an oxo-bridged dinuclear structure with oxodiperoxo groups being further linked by a single triazole bridge.

Molybdenum(0) tricarbonyl and tetracarbonyl complexes with a cationic pyrazolylpyridine ligand: synthesis, crystal structures and catalytic performance in olefin epoxidation.

The synthesis of molybdenum(0) tricarbonyl and tetracarbonyl complexes of the form [Mo(CO)3(ptapzpy)Br] (1) and cis-[Mo(CO)4(ptapzpy)]Br (2) is reported, where ptapzpy = 2-(1-propyltrimethylammonium-3-pyrazolyl)pyridine. Preparation of these derivatives was accomplished either through thermal replacement of CO in Mo(CO)6 (for 1) or substitution under milder conditions of piperidine ligands in the precursor cis-[Mo(CO)4(pip)2] (for 2). The crystal structures of the ligand [ptapzpy]Br and complexes 1 and 2 were determined. Thermal treatment of 2 at 125-150 °C leads to mono decarbonylation and formation of 1. On the other hand, oxidative decarbonylation of 1 and 2 by reaction with tert-butylhydroperoxide (TBHP, 10 equiv.) gives a molybdenum oxide hybrid material formulated as [Mo3O9([ptapzpy]Br)2]·nH2O (3), which was characterised by FT-IR and Raman spectroscopy, thermogravimetric analysis, and 13C{1H} CP MAS NMR spectroscopy. Compounds 1-3 were effective (pre)catalysts for the epoxidation of cis-cyclooctene at 55 °C with aqueous H2O2 or TBHP (slightly better results were obtained with the former). The characterisation of the Mo-containing solids isolated after the catalytic reaction showed that poorly soluble ß-octamolybdate salts, (L) x [Mo8O26], were formed from 1-3 with TBHP and from 1 with H2O2, while soluble oxoperoxo species were formed from 3 with H2O2. These findings helped to explain the different catalytic performances obtained.

Ferrocene and ferrocenium inclusion compounds with cucurbiturils: a study of metal atom dynamics probed by Mössbauer spectroscopy.

Temperature-dependent 57Fe Mössbauer effect (ME) spectroscopic studies were carried out on ferrocene (Fc), 1,1'-dimethylferrocene (1,1'(CH3)2Fc) and ferrocenium hexafluorophosphate (FcPF6) guest species in cucurbit[n]uril (n = 7, 8) inclusion complexes. The solid inclusion complexes were isolated by freeze-drying of dilute aqueous solutions and/or microwave-assisted precipitation from concentrated mixtures. The presence of genuine 1 : 1 (host : guest) inclusion complexes in the isolated solids was supported by liquid-state 1H and solid-state 13C{1H} MAS NMR, elemental and thermogravimetric analyses, powder X-ray diffraction, FTIR spectroscopy, and diffuse reflectance UV-Vis spectroscopy. The ME spectra of the complexes CB7·Fc and CB7·1,1'(CH3)2Fc consist of well-resolved doublets with hyperfine parameters (isomer shift and quadrupole splitting at 90 K) and temperature-dependent recoil-free fraction data that are very similar to those for the neat parent compounds, Fc and 1,1'(CH3)2Fc, suggesting that the organometallic guest molecules do not interact significantly with the host environment over the experimental temperature range. The ME spectra for CB7·FcPF6 and CB8·FcPF6 consist of a major broad line resonance attributed to a paramagnetic FeIII site. From the temperature-dependence of the recoil-free fraction it is evident that the charged guest species in these systems interact with the host environment significantly more strongly than was observed in the case of the neutral guest species, Fc and 1,1'(CH3)2Fc. Moreover, the ME data indicate that the vibrational amplitude of the ferrocenium guest molecule is significantly larger in the CB8 host molecule than in the CB7 homologue, as expected on the basis of the different cavity sizes.

Triazolyl, Imidazolyl, and Carboxylic Acid Moieties in the Design of Molybdenum Trioxide Hybrids: Photophysical and Catalytic Behavior.

Three organic ligands bearing 1,2,4-triazolyl donor moieties, (S)-4-(1-phenylpropyl)-1,2,4-triazole (trethbz), 4-(1,2,4-triazol-4-yl)benzoic acid (trPhCO2H), and 3-(1H-imidazol-4-yl)-2-(1,2,4-triazol-4-yl)propionic acid (trhis), were prepared to evaluate their coordination behavior in the development of molybdenum(VI) oxide organic hybrids. Four compounds, [Mo2O6(trethbz)2]·H2O (1), [Mo4O12(trPhCO2H)2]·0.5H2O (2a), [Mo4O12(trPhCO2H)2]·H2O (2b), and [Mo8O25(trhis)2(trhisH)2]·2H2O (3), were synthesized and characterized. The monofunctional tr-ligand resulted in the formation of a zigzag chain [Mo2O6(trethbz)2] built up from cis-{MoO4N2} octahedra united through common µ2-O vertices. Employing the heterodonor ligand with tr/-CO2H functions afforded either layer or ribbon structures of corner- or edge-sharing {MoO5N} polyhedra (2a or 2b) stapled by tr-links in axial positions, whereas -CO2H groups remained uncoordinated. The presence of the im-heterocycle as an extra function in trhis facilitated formation of zwitterionic molecules with a protonated imidazolium group (imH+) and a negatively charged -CO2- group, whereas the tr-fragment was left neutral. Under the acidic hydrothermal conditions used, the organic ligand binds to molybdenum atoms either through [N-N]-tr or through both [N-N]-tr and µ2-CO2- units, which occur in protonated bidentate or zwitterionic tetradentate forms (trhisH+ and trhis, respectively). This leads to a new zigzag subtopological motif (3) of negatively charged polyoxomolybdate {Mo8O25}n2n- consisting of corner- and edge-sharing cis-{MoO4N2} and {MoO6} octahedra, while the tetradentate zwitterrionic trhis species connect these chains into a 2D net. Electronic spectra of the compounds showed optical gaps consistent with semiconducting behavior. The compounds were investigated as epoxidation catalysts via the model reactions of achiral and prochiral olefins (cis-cyclooctene and trans-ß-methylstyrene) with tert-butylhydroperoxide. The best-performing catalyst (1) was explored for the epoxidation of other olefins, including biomass-derived methyl oleate, methyl linoleate, and prochiral dl-limonene.

Insights into the Photophysics and Supramolecular Organization of Congo Red in Solution and the Solid State.

Steady-state and time-resolved absorption and fluorescence measurements are reported for Congo Red (CR) in aqueous and dimethylsulfoxide (DMSO) solutions. The very low fluorescence quantum yield (≈10-4 ) for CR in dilute solutions together with the absence of a triplet state indicates that internal conversion is the dominant deactivation route with more than 99.99 % of the quanta loss (attributed to the energy gap law for radiationless transitions). Although no direct evidence for trans-cis photoisomerization was obtained from absorption or fluorescence data, the global analysis of fs-transient absorption data indicates the presence of a photoproduct with a lifetime of ≈170 ps that is suggested to be associated with such a process. Spectral data for more concentrated CR solutions indicate the presence of oblique or twisted J-type aggregates. These results are compared with spectra for CR in the solid state (sodium salt) and intercalated in a layered double hydroxide via a one-step co-precipitation route. Powder XRD and electronic spectral data for the nanohybrid indicate that the CR guest molecules are intercalated as a monolayer consisting of slipped cofacial J-type aggregates.

Solid-state study of the structure and host-guest chemistry of cucurbituril-ferrocene inclusion complexes.

Inclusion complexes of ferrocene (Fc) with cucurbit[n]urils (n = 7, 8) have been prepared via a rapid microwave-assisted hydrothermal approach. Solids were isolated and characterised by elemental analysis, powder X-ray diffraction (PXRD), spectroscopic, and thermoanalytical methods. The UV-Vis spectra support the presence of Fc in Fc@CB7 and a mixture of Fc and ferrocenium ions in Fc@CB8. Partial oxidation of Fc to Fc+ takes place in situ mainly due to the presence of acid of crystallisation in CB8. On the basis of PXRD, the complex Fc@CB8 is classified into an isostructural series that is formed by several CB8-containing compounds that crystallise in the space group I41/a and have similar unit cell dimensions and CB8 packing motifs. The FT-IR and Raman spectra of Fc@CB7 are compared with those of the CB7 host and the Fc guest starting materials, revealing significant frequency shifts of some Fc-centered vibrational modes upon complexation. Blueshifts of the Fe-Cp stretching and ring tilt bands are attributed to encapsulation of Fc monomers in a constrained environment, leading to restricted motion effects and/or a change in the Fc conformation from staggered to eclipsed. The absence of comparable shifts for Fc@CB8 point to a weaker host-guest interaction as a consequence of the larger cavity size. The different host-guest interactions are also evident through a comparison of the 13C{1H} CP MAS NMR spectra. Thermogravimetric analysis for the inclusion compounds reveals that sublimation of Fc is inhibited by molecular encapsulation to the extent that oxidative decomposition of the organoiron species takes place concurrently with cucurbituril decomposition, leading to the formation of hematite, α-Fe2O3.

A recyclable ionic liquid-oxomolybdenum(vi) catalytic system for the oxidative desulfurization of model and real diesel fuel.

The oxidative desulfurization of model and real diesel has been studied using the complex [MoO2Cl2(4,4'-di-tert-butyl-2,2'-bipyridine)] as (pre)catalyst, aq. H2O2 as oxidant, and an ionic liquid as extraction solvent. Under moderate conditions (50 °C) and short reaction times (<3 h), dibenzothiophene, 4-methyldibenzothiophene and 4,6-dimethyldibenzothiophene could be completely removed from the model diesel. The (pre)catalyst 1 was transformed in situ to the active catalyst [MoO(O2)2(di-tBu-bipy)]. By sequentially performing extractive desulfurization and ECODS steps, 76% sulfur removal was achieved for a real diesel (Sinitial = 2300 ppm). For both the model and real diesels, the catalyst/IL phase could be easily recycled and reused with no loss of desulfurization efficiency.

Catalytic alcoholysis of epoxides using metal-free cucurbituril-based solids.

Metal-free cucurbit[7]uril (CB7) solid-state assemblies promote acid-catalysed alcoholysis of aliphatic and aromatic epoxides under mild conditions to give ß-alkoxy alcohols, which are important intermediates for the synthesis of a vast range of compounds such as bioactive pharmaceuticals. The catalytic process is heterogeneous and the catalyst can be reused in consecutive runs without any reactivation treatment. The acid species responsible for the catalytic activity of CB7 may be entrapped hydronium ions.

Crystal structure of an organic-inorganic supra-molecular salt based on a 4,4'-methyl-enebis(3,5-dimethyl-1H-pyrazol-2-ium) cation and a ß-octa-molybdate anion.

The asymmetric unit of the title compound, bis-[4,4'-methyl-enebis(3,5-dimethyl-1H-pyrazol-2-ium)] ß-octa-molybdate, (C11H18N4)2[Mo8O26] or (H4mbdpz)2[Mo8O26], is composed of an H4mbdpz(2+) cation and half of the ß-octa-molybdate anion which is completed by inversion symmetry. The organic mol-ecular units are engaged in a series of N-H⋯O hydrogen bonds with neighbouring anions, with N⋯O distances and N-H⋯O angles in the ranges 2.730 (2)-2.941 (2) Šand 122-166°, respectively. These inter-actions lead to the formation of a supra-molecular two-dimensional network parallel to the (010) plane.

Synthesis and Structural Elucidation of Triazolylmolybdenum(VI) Oxide Hybrids and Their Behavior as Oxidation Catalysts.

A large family of bifunctional 1,2,4-triazole molecular tectons (tr) has been explored for engineering molybdenum(VI) oxide hybrid solids. Specifically, tr ligands bearing auxiliary basic or acidic groups were of the type amine, pyrazole, 1H-tetrazole, and 1,2,4-triazole. The organically templated molybdenum(VI) oxide solids with the general compositions [MoO3(tr)], [Mo2O6(tr)], and [Mo2O6(tr)(H2O)2] were prepared under mild hydrothermal conditions or by refluxing in water. Their crystal structures consist of zigzag chains, ribbons, or helixes of alternating cis-{MoO4N2} or {MoO5N} polyhedra stapled by short [N-N]-tr bridges that for bitriazole ligands convert the motifs into 2D or 3D frameworks. The high thermal (235-350 °C) and chemical stability observed for the materials makes them promising for catalytic applications. The molybdenum(VI) oxide hybrids were successfully explored as versatile oxidation catalysts with tert-butyl hydroperoxide (TBHP) or aqueous H2O2 as an oxygen source, at 70 °C. Catalytic performances were influenced by the different acidic-basic properties and steric hindrances of coordinating organic ligands as well as the structural dimensionality of the hybrid.

An Indigo Carmine-Based Hybrid Nanocomposite with Supramolecular Control of Dye Aggregation and Photobehavior.

Zn-Al layered double hydroxides (LDHs) containing solely indigo carmine (IC) or 1-hexanesulfonate (HS) anions, or a mixture of the two with different HS/IC molar ratios, were prepared by the direct synthesis method and characterized by various techniques. Hydrotalcite-type phases were obtained with basal spacings of 17.6 Šfor the LDH intercalated by IC (IC-LDH) and 18.2-18.3 Šfor the other materials containing HS. From the basal spacing for IC-LDH and UV/Vis spectroscopic data, it is proposed that the dye molecules assemble within the interlayer galleries to form a J-type stacking arrangement. A comprehensive electronic spectral and photophysical study was undertaken for IC in solution and all materials, aiming to obtain a detailed characterization of the host-guest and guest-guest interactions. In solution (the solvent surrounded "isolated" molecule), IC presents a fast excited state proton transfer with rate constants of ∼1.2-1.4×10(11)  s(-1) , which is linked to the very efficient radiationless deactivation channel. In the solid state it is shown that incorporation of IC within the LDH decreases the level of aggregation, and that further addition of HS induces the appearance of isolated IC units within the LDH galleries. The indigo carmine-based nanocomposites reported constitute a step forward in the design of hybrid materials with tunable properties.

Crystal Structure and Catalytic Behavior in Olefin Epoxidation of a One-Dimensional Tungsten Oxide/Bipyridine Hybrid.

The tungsten oxide/2,2'-bipyridine hybrid material [WO3(2,2'-bpy)]·nH2O (n = 1-2) (1) has been prepared in near quantitative yield by the reaction of H2WO4, 2,2'-bpy, and H2O in the mole ratio of ca. 1:2:700 at 160 °C for 98 h in a rotating Teflon-lined digestion bomb. The solid-state structure of 1 was solved and refined through Rietveld analysis of high-resolution synchrotron X-ray diffraction data collected for the microcrystalline powder. The material, crystallizing in the orthorhombic space group Iba2, is composed of a one-dimensional organic-inorganic hybrid polymer, ∞(1)[WO3(2,2'-bpy)], topologically identical to that found in the previously reported anhydrous phases [MO3(2,2'-bpy)] (M = Mo, W). While in the latter the N,N'-chelated 2,2'-bpy ligands of adjacent corner-shared {MO4N2} octahedra are positioned on the same side of the 1D chain, in 1 the 2,2'-bpy ligands alternate above and below the chain. The catalytic behavior of compound 1 for the epoxidation of cis-cyclooctene was compared with that for several other tungsten- or molybdenum-based (pre)catalysts, including the hybrid polymer [MoO3(2,2'-bpy)]. While the latter exhibits superior performance when tert-butyl hydroperoxide (TBHP) is used as the oxidant, compound 1 is superior when aqueous hydrogen peroxide is used, allowing near-quantitative conversion of the olefin to the epoxide. With H2O2, compounds 1 and [MoO3(2,2'-bpy)] act as sources of soluble active species, namely, the oxodiperoxo complex [MO(O2)2(2,2'-bpy)], which is formed in situ. Compounds 1 and [WO(O2)2(2,2'-bpy)] (2) were further tested in the epoxidation of cyclododecene, trans-2-octene, 1-octene, (R)-limonene, and styrene. The structure of 2 was determined by single-crystal X-ray diffraction and found to be isotypical with the molybdenum analogue.

Dichlorodioxomolybdenum(VI) complexes bearing oxygen-donor ligands as olefin epoxidation catalysts.

Treatment of the solvent adduct [MoO2Cl2(THF)2] with either 2 equivalents of N,N-dimethylbenzamide (DMB) or 1 equivalent of N,N'-diethyloxamide (DEO) gave the dioxomolybdenum(vi) complexes [MoO2Cl2(DMB)2] () and [MoO2Cl2(DEO)] (). The molecular structures of and were determined by single-crystal X-ray diffraction. Both complexes present a distorted octahedral geometry and adopt the cis-oxo, trans-Cl, cis-L configuration typical of complexes of the type [MoO2X2(L)n], with either the monodentate DMB or bidentate DEO oxygen-donor ligands occupying the equatorial positions trans to the oxo groups. The complexes were applied as homogeneous catalysts for the epoxidation of olefins, namely cis-cyclooctene (Cy), 1-octene, trans-2-octene, α-pinene and (R)-(+)-limonene, using tert-butylhydroperoxide (TBHP) as oxidant. In the epoxidation of Cy at 55 °C, the desired epoxide was the only product and turnover frequencies in the range of ca. 3150-3200 mol molMo(-1) h(-1) could be reached. The catalytic production of cyclooctene oxide was investigated in detail, varying either the reaction temperature or the cosolvent. Complexes and were also applied in liquid-liquid biphasic catalytic epoxidation reactions by using an ionic liquid of the type [C4mim][X] (C4mim = 1-n-butyl-3-methylimidazolium; X = NTf2, BF4 or PF6] as a solvent to immobilise the metal catalysts. Recycling for multiple catalytic runs was achieved without loss of activity.