A comprehensive method for modeling and simulating ion exchange chromatography of complex mixtures.

In recent years, many biological-based products have been developed, representing a significant fraction of income in the pharmaceutical market. Ion exchange chromatography is an important downstream step for the purification of target recombinant proteins present in clarified cell extracts, together with many other unknown impurities. This work develops a robust approach to model and simulate the purification of untagged heterologous proteins, so that the improved conditions to carry out an ion exchange chromatography are identified in a rational basis prior to the real purification run itself. Purification of the pneumococcal surface protein A (PspA4Pro) was used as a case study. This protein is produced by recombinant Escherichia coli and is a candidate for the manufacture of improved pneumococcal vaccines. The developed method combined experimental and computational procedures. Different anion exchange operating conditions were mapped in order to gather a broad range of representative experimental data. The equilibrium dispersive and the steric mass action equations were used to model and simulate the process. A training strategy to fit the model and separately describe the elution profiles of PspA4Pro and other proteins of the cell extract was applied. Based on the simulation results, a reduced ionic strength was applied for PspA4Pro elution, leading to increases of 14.9% and 11.5% for PspA4Pro recovery and purity, respectively, compared to the original elution profile. These results showed the potential of this method, which could be further applied to improve the performance of ion exchange chromatography in the purification of other target proteins under real process conditions.

ClearColi as a platform for untagged pneumococcal surface protein A production: cultivation strategy, bioreactor culture, and purification.

Several studies have searched for new antigens to produce pneumococcal vaccines that are more effective and could provide broader coverage, given the great number of serotypes causing pneumococcal diseases. One of the promising subunit vaccine candidates is untagged recombinant pneumococcal surface protein A (PspA4Pro), obtainable in high quantities using recombinant Escherichia coli as a microbial factory. However, lipopolysaccharides (LPS) present in E. coli cell extracts must be removed, in order to obtain the target protein at the required purity, which makes the downstream process more complex and expensive. Endotoxin-free E. coli strains, which synthesize a nontoxic mutant LPS, may offer a cost-effective alternative way to produce recombinant proteins for application as therapeutics. This paper presents an investigation of PspA4Pro production employing the endotoxin-free recombinant strain ClearColi® BL21(DE3) with different media (defined, auto-induction, and other complex media), temperatures (27, 32, and 37 °C), and inducers. In comparison to conventional E. coli cells in a defined medium, ClearColi presented similar PspA4Pro yields, with lower productivities. Complex medium formulations supplemented with salts favored PspA4Pro yields, titers, and ClearColi growth rates. Induction with isopropyl-ß-D-thiogalactopyranoside (0.5 mM) and lactose (2.5 g/L) together in a defined medium at 32 °C, which appeared to be a promising cultivation strategy, was reproduced in 5 L bioreactor culture, leading to a yield of 146.0 mg PspA4Pro/g dry cell weight. After purification, the cell extract generated from ClearColi led to 98% purity PspA4Pro, which maintained secondary structure and biological function. ClearColi is a potential host for industrial recombinant protein production. KEY POINTS: • ClearColi can produce as much PspA4Pro as conventional E. coli BL21(DE3) cells. • 10.5 g PspA4Pro produced in ClearColi bioreactor culture using a defined medium. • Functional PspA4Pro (98% of purity) was obtained in ClearColi bioreactor culture. Graphical abstract.

Robust Immune Response Induced by Schistosoma mansoni TSP-2 Antigen Coupled to Bacterial Outer Membrane Vesicles.

PURPOSE: The use of adjuvants can significantly strengthen a vaccine's efficacy. We sought to explore the immunization efficacy of bacterial outer membrane vesicles (OMVs) displaying the Schistosoma mansoni antigen, SmTSP-2, through a biotin-rhizavidin coupling approach. The rationale is to exploit the nanoparticulate structure and the adjuvant properties of OMVs to induce a robust antigen-specific immune response, in light of developing new vaccines against S. mansoni. MATERIALS AND METHODS: OMVs were obtained from Neisseria lactamica and conjugated with biotin. The recombinant SmTSP-2 in fusion with the biotin-binding protein rhizavidin (rRzvSmTSP-2) was produced in E. coli and coupled to biotinylated OMVs to generate an OMV complex displaying SmTSP-2 on the membrane surface (OMV:rSmTSP-2). Transmission electron microscopy (TEM) and dynamic light scattering analysis were used to determine particle charge and size. The immunogenicity of the vaccine complex was evaluated in C57BL/6 mice. RESULTS: The rRzvSmTSP-2 protein was successfully coupled to biotinylated OMVs and purified by size-exclusion chromatography. The OMV:rSmTSP-2 nanoparticles showed an average size of 200 nm, with zeta potential around - 28 mV. Mouse Bone Marrow Dendritic Cells were activated by the nanoparticles as determined by increased expression of the co-stimulatory molecules CD40 and CD86, and the proinflammatory cytokines (TNF-α, IL-6 and IL-12) or IL-10. Splenocytes of mice immunized with OMV:rSmTSP-2 nanoparticles reacted to an in vitro challenge with SmTSP-2 with an increased production of IL-6, IL-10 and IL-17 and displayed a higher number of CD4+ and CD8+ T lymphocytes expressing IFN-γ, IL-4 and IL-2, compared to mice immunized with the antigen alone. Immunization of mice with OMV:rSmTSP-2 induced a 100-fold increase in specific anti-SmTSP-2 IgG antibody titers, as compared to the group receiving the recombinant rSmTSP-2 protein alone or even co-administered with unconjugated OMV. CONCLUSION: Our results demonstrate that the SmTSP-2 antigen coupled with OMVs is highly immunogenic in mice, supporting the potential effectiveness of this platform for improved antigen delivery in novel vaccine strategies.

Optimization of Expression and Purification of Schistosoma mansoni Antigens in Fusion with Rhizavidin.

Schistosomiasis causes significant morbidity and mortality. Vaccine efforts to date indicate the need to increase the immunogenicity of Schistosoma antigens. The multiple antigen-presenting system, whereby proteins are genetically fused to rhizavidin and affinity linked to biotinylated templates, enables the generation of robust immune responses. The objective of this work was to express and purify the S. mansoni antigens, SmTSP-2 and SmCD59.2, in fusion with rhizavidin. The fusion with rhizavidin greatly decreased the expression level of rSmTSP-2, but not rSmCD59.2, and both were expressed in the insoluble fraction, requiring optimization of culture conditions. Evaluation of different E. coli strains and media showed that BL21-DE3 cultured in Terrific Broth provided the highest expression levels of both proteins. Investigation of a range of time and temperature of induction showed that E. coli strains expressing rRzv:SmTSP-2 and rRzv:SmCD59.2 showed the highest protein production at 23 °C for 15 h. Recombinant proteins were purified by a single step of affinity chromatography allowing isolation of these proteins in high concentration and purity. The optimization process increased final soluble protein yield of rRzv:SmTSP-2 by fourfold and rRzv:SmCD59.2 by tenfold, providing ~ 20 mg/L of each protein. Optimized fusion protein production will allow antigen use in biotin-rhizavidin affinity platforms.

High stabilization and hyperactivation of a Recombinant ß-Xylosidase through Immobilization Strategies.

Attainment of a stable and highly active ß-xylosidase is of major importance for the efficient and cost-competitive hydrolysis of hemicellulose xylan, as well as for its industrial conversion into biofuels and biochemicals. Here, a recombinant ß-xylosidase of the glycoside hydrolase family (GH43) from Bacillus subtilis was produced in Escherichia coli culture, purified, and subsequently immobilized on agarose and chitosan. Glutaraldehyde and glyoxyl groups were evaluated as activating agents to select the most efficient derivative. Multi-point immobilization on agarose led to an extraordinary thermal stability (half-lives 3604 and 164-fold higher than the free enzyme, at 50° and 35 °C, respectively). Even for chitosan activated with glutaraldehyde, a low-cost support, thermal stability of the immobilized enzyme was 326 and 12-fold higher than the free enzyme at 50° and 35°C, respectively. Immobilized enzymes showed no release of any subunit for the agarose-glyoxyl derivative, and only a few ones for the support activated with glutaraldehyde. Most remarkably, the enzyme kinetic behavior after immobilization increased up to 4-fold in relation to the free one. ß-xylosidase, a tetrameric enzyme with four identical subunits, exists in equilibrium between the monomeric and oligomeric forms in solution. Depending on the pH of immobilization, the enzyme oligomerization can be favored, thus explaining the hyperactivation phenomenon. Both glyoxyl-agarose and chitosan-glutaraldehyde derivatives were used to catalyze corncob xylan hydrolysis, reaching 72 % conversion, representing a xylose productivity of around 20 g L-1 h-1. After ten 4h-cycles (pH 6.0, 35 °C), the xylan-to-xylose conversion remained approximately unchanged. Therefore, the immobilized ß-xylosidases prepared in this work can be of great interest as biocatalysts in a biorefinery context.

Evaluation of polymer choice on immunogenicity of chitosan coated PLGA NPs with surface-adsorbed pneumococcal protein antigen PspA4Pro.

Polymeric nanoparticles (NPs) are recognized as potential delivery vehicles for vaccines. PLGA is a biocompatible polymer synonymous with polymeric NPs, which can be coated with other polymers such as chitosan that has intrinsic adjuvant properties as well as mucoadhesive properties. Numerous modifications and variations exist for PLGA and chitosan, which can influence the NP characteristics and the resulting immunogenicity. The current study investigated variations for making chitosan coated PLGA NPs incorporating recombinant pneumococcal surface protein A from family 2, clade 4 (PspA4Pro) antigen as a vaccine targeting the vast majority of pneumococcal strains and determine the effect of the polymers on particle size, surface charge, and surface marker upregulation on a dendritic cell (DC) line in vitro. PLGA variations tested with the ester-terminal group had the greatest detriment for prospective vaccine use, due to the lowest PspA4Pro adsorption and induction of CD40 and CD86 cell surface markers on DCs. The negatively charged chitosans exhibited the lowest surface marker expressions, similar to the uncoated NP, supporting the commonly accepted notion that positive surface charge augments immunogenic effects of the NPs. However, the study indicated that NPs made from PLGA with an acid terminated group, and chitosan HCl salt, exhibit particle characteristics, antigen adsorption efficiency and immunogenicity, which could be most suitable as a vaccine formulation.

Development of recombinant human granulocyte colony-stimulating factor (nartograstim) production process in Escherichia coli compatible with industrial scale and with no antibiotics in the culture medium.

The granulocyte colony-stimulating factor (G-CSF) is a hematopoietic cytokine that has important clinical applications for treating neutropenia. Nartograstim is a recombinant variant of human G-CSF. Nartograstim has been produced in Escherichia coli as inclusion bodies (IB) and presents higher stability and biological activity than the wild type of human G-CSF because of its mutations. We developed a production process of nartograstim in a 10-L bioreactor using auto-induction or chemically defined medium. After cell lysis, centrifugation, IB washing, and IB solubilization, the following three refolding methods were evaluated: diafiltration, dialysis, and direct dilution in two refolding buffers. Western blot and SDS-PAGE confirmed the identity of 18.8-kDa bands as nartograstim in both cultures. The auto-induction medium produced 1.17 g/L and chemically defined medium produced 0.95 g/L. The dilution method yielded the highest percentage of refolding (99%). After refolding, many contaminant proteins precipitated during pH adjustment to 5.2, increasing purity from 50 to 78%. After applying the supernatant to cation exchange chromatography (CEC), nartograstim recovery was low and the purity was 87%. However, when the refolding solution was applied to anion exchange chromatography followed by CEC, 91%-98% purity and 2.2% recovery were obtained. The purification process described in this work can be used to obtain nartograstim with high purity, structural integrity, and the expected biological activity. KEY POINTS: • Few papers report the final recovery of the purification process from inclusion bodies. • The process developed led to high purity and reasonable recovery compared to literature. • Nartograstim biological activity was demonstrated in mice using a neutropenia model.

Anti-Flavivirus Vaccines: Review of the Present Situation and Perspectives of Subunit Vaccines Produced in Escherichia coli.

This article aims to review the present status of anti-flavivirus subunit vaccines, both those at the experimental stage and those already available for clinical use. Aspects regarding development of vaccines to Yellow Fever virus, (YFV), Dengue virus (DENV), West Nile virus (WNV), Zika virus (ZIKV), and Japanese encephalitis virus (JEV) are highlighted, with particular emphasis on purified recombinant proteins generated in bacterial cells. Currently licensed anti-flavivirus vaccines are based on inactivated, attenuated, or virus-vector vaccines. However, technological advances in the generation of recombinant antigens with preserved structural and immunological determinants reveal new possibilities for the development of recombinant protein-based vaccine formulations for clinical testing. Furthermore, novel proposals for multi-epitope vaccines and the discovery of new adjuvants and delivery systems that enhance and/or modulate immune responses can pave the way for the development of successful subunit vaccines. Nonetheless, advances in this field require high investments that will probably not raise interest from private pharmaceutical companies and, therefore, will require support by international philanthropic organizations and governments of the countries more severely stricken by these viruses.

Cost analysis based on bioreactor cultivation conditions: Production of a soluble recombinant protein using Escherichia coli BL21(DE3).

The impact of cultivation strategy on the cost of recombinant protein production is crucial for defining cost-effective bioreactor operation conditions. This paper presents a methodology to estimate and compare cost impacts related to utilities as well as medium composition, using simple design equations and accessible data. Data from batch bioreactor cultures were used as case study involving the production of pneumococcal surface protein A, a soluble recombinant protein, employing E. coli BL21(DE3). Cultivation strategies and corresponding process costs covered a wide range of operational conditions, including different media, inducers, and temperatures. The core expenses were related to the medium and cooling. When the price of peptone was above the threshold value of US$ 30/kg, defined medium became the best choice. IPTG and temperatures around 32 °C led to shorter cultures and lower PspA4Pro production costs. The procedure offers a simple, accessible theoretical tool to identify cost-effective production strategies using bioreactors.

Process intensification for production of Streptococcus pneumoniae whole-cell vaccine.

The available pneumococcal conjugate vaccines provide protection against only those serotypes that are included in the vaccine, which leads to a selective pressure and serotype replacement in the population. An alternative low-cost, safe and serotype-independent vaccine was developed based on a nonencapsulated pneumococcus strain. This study evaluates process intensification to improve biomass production and shows for the first time the use of perfusion-batch with cell recycling for bacterial vaccine production. Batch, fed-batch, and perfusion-batch were performed at 10 L scale using a complex animal component-free culture medium. Cells were harvested at the highest optical density, concentrated and washed using microfiltration or centrifugation to compare cell separation methods. Higher biomass was achieved using perfusion-batch, which removes lactate while retaining cells. The biomass produced in perfusion-batch would represent at least a fourfold greater number of doses per cultivation than in the previously described batch process. Each strategy yielded similar vaccines in terms of quality as evaluated by western blot and animal immunization assays, indicating that so far, perfusion-batch is the best strategy for the intensification of pneumococcal whole-cell vaccine production, as it can be integrated to the cell separation process keeping the same vaccine quality.

Modeling and simulation of anion exchange chromatography for purification of proteins in complex mixtures.

Ion exchange chromatography is extensively used in the purification of biological compounds. Reliable mathematical models describing this chromatographic technique are available and can be used to improve the performance of this separation step. However, the use of synthetic mixtures for model development hampers the application of this approach with real cell extracts processed in downstream operations. This work presents an original approach for handling non-synthetic genuine mixtures of proteins, which was applied in the purification of an untagged recombinant pneumococcal surface protein A (PspA4Pro). First, evaluation was made of the efficiency of steric mass action (SMA) and modified Langmuir isotherms, which were separately used together with the equilibrium dispersive model (EDM). The data used for parameter estimation and model validation were obtained from anion exchange chromatography runs (employing Q-Sepharose FF), applied to real cell extracts produced by different cultivation strategies. Simulations showed that the models were able to describe the complex mixtures of unknown proteins. Next, the EDM and SMA approaches were used to separately describe the profile of PspA4Pro and the pool of protein impurities eluted together. The simulations showed that PspA4Pro tended to elute at the beginning of the peak, enabling the establishment of an alternative elution schedule that provided a 34% increase in the purity achieved using the anion exchange chromatography.

Mucosal immunization with PspA (Pneumococcal surface protein A)-adsorbed nanoparticles targeting the lungs for protection against pneumococcal infection.

Burden of pneumonia caused by Streptococcus pneumoniae remains high despite the availability of conjugate vaccines. Mucosal immunization targeting the lungs is an attractive alternative for the induction of local immune responses to improve protection against pneumonia. Our group had previously described the development of poly(glycerol adipate-co-ω-pentadecalactone) (PGA-co-PDL) polymeric nanoparticles (NPs) adsorbed with Pneumococcal surface protein A from clade 4 (PspA4Pro) within L-leucine microcarriers (nanocomposite microparticles-NCMPs) for mucosal delivery targeting the lungs (NP/NCMP PspA4Pro). NP/NCMP PspA4Pro was now used for immunization of mice. Inoculation of this formulation induced anti-PspA4Pro IgG antibodies in serum and lungs. Analysis of binding of serum IgG to intact bacteria showed efficient binding to bacteria expressing PspA from clades 3, 4 and 5 (family 2), but no binding to bacteria expressing PspA from clades 1 and 2 (family 1) was observed. Both mucosal immunization with NP/NCMP PspA4Pro and subcutaneous injection of the protein elicited partial protection against intranasal lethal pneumococcal challenge with a serotype 3 strain expressing PspA from clade 5 (PspA5). Although similar survival levels were observed for mucosal immunization with NP/NCMP PspA4Pro and subcutaneous immunization with purified protein, NP/NCMP PspA4Pro induced earlier control of the infection. Conversely, neither immunization with NP/NCMP PspA4Pro nor subcutaneous immunization with purified protein reduced bacterial burden in the lungs after challenge with a serotype 19F strain expressing PspA from clade 1 (PspA1). Mucosal immunization with NP/NCMP PspA4Pro targeting the lungs is thus able to induce local and systemic antibodies, conferring protection only against a strain expressing PspA from the homologous family 2.

Conjugation of PspA4Pro with Capsular Streptococcus pneumoniae Polysaccharide Serotype 14 Does Not Reduce the Induction of Cross-Reactive Antibodies.

Current pneumococcal vaccines are composed of bacterial polysaccharides as antigens, plain or conjugated to carrier proteins. While efficacious against vaccine serotypes, epidemiologic data show an increasing incidence of infections caused by nonvaccine serotypes of Streptococcus pneumoniae The use of pneumococcal surface protein A (PspA) as a carrier protein in a conjugate vaccine could help prevent serotype replacement by increasing vaccine coverage and reducing selective pressure of S. pneumoniae serotypes. PspA is present in all pneumococcal strains, is highly immunogenic, and is known to induce protective antibodies. Based on its sequence, PspA has been classified into three families and six clades. A PspA fragment derived from family 2, clade 4 (PspA4Pro), was shown to generate antibodies with a broad range of cross-reactivity, across clades and families. Here, PspA4Pro was modified and conjugated to capsular polysaccharide serotype 14 (PS14). We investigated the impact of conjugation on the immune response induced to PspA4Pro and PS14. Mice immunized with the PS14-mPspA4Pro conjugate produced higher titers of anti-PS14 antibodies than the animals that received coadministered antigens. The conjugate induced antibodies with opsonophagocytic activity against PS14-carrying strains, as well as against a panel of strains bearing PspAs from five clades (encompassing families 1 and 2) bearing a non-PS14 serotype. Furthermore, mice immunized with PS14-mPspA4Pro were protected against nasal colonization with a nonrelated S. pneumoniae strain bearing PspA from clade 1, serotype 6B. These results demonstrate that the cross-reactivity mediated by PspA4Pro is retained following conjugation, supporting the use of PspA4 as a carrier protein in order to enhance pneumococcal vaccine coverage and encourage its further investigation as a candidate in future vaccine designs.

IL-17A and complement contribute to killing of pneumococci following immunization with a pneumococcal whole cell vaccine.

The pneumococcal whole cell vaccine (PWCV) has been investigated as an alternative to polysaccharide-based vaccines currently in use. It is a non-encapsulated killed vaccine preparation that induces non-capsular antibodies protecting mice against invasive pneumococcal disease (IPD) and reducing nasopharyngeal (NP) carriage via IL-17A activation of mouse phagocytes. Here, we show that PWCV induces antibody and IL-17A production to protect mice against challenge in a fatal aspiration-sepsis model after only one dose. We observed protection even with a boiled preparation, attesting to the stability and robustness of the vaccine. PWCV antibodies were shown to bind to different encapsulated strains, but complement deposition on the pneumococcal surface was observed only on serotype 3 strains; using flow cytometer methodology, variations in PWCV quality, as in the boiled vaccine, were detected. Moreover, anti-PWCV induces phagocytosis of different pneumococcal serotypes by murine peritoneal cells in the presence of complement or IL-17A. These findings suggest that complement and IL-17A may participate in the process of phagocytosis induced by PWCV antibodies. IL-17A can stimulate phagocytic cells to kill pneumococcus and this is enhanced in the presence of PWCV antibodies bound to the bacterial cell surface. Our results provide further support for the PWCV as a broad-range vaccine against all existing serotypes, potentially providing protection for humans against NP colonization and IPD. Additionally, we suggest complement deposition assay as a tool to detect subtle differences between PWCV lots.

Pulmonary dry powder vaccine of pneumococcal antigen loaded nanoparticles.

Pneumonia, caused by Streptococcus pneumoniae, mainly affects the immunocompromised, the very young and the old, and remains one of the leading causes of death. A steady rise in disease numbers from non-vaccine serotypes necessitates a new vaccine formulation that ideally has better antigen stability and integrity, does not require cold-chain and can be delivered non-invasively. In this study, a dry powder vaccine containing an important antigen of S. pneumoniae, pneumococcal surface protein A (PspA) that has shown cross-reactivity amongst serotypes to be delivered via the pulmonary route has been formulated. The formulation contains the antigen PspA adsorbed onto the surface of polymeric nanoparticles encapsulated in L-leucine microparticles that can be loaded into capsules and delivered via an inhaler. We have successfully synthesized particles of ∼150 nm and achieved ∼20 µg of PspA adsorption per mg of NPs. In addition, the spray-dried powders displayed a FPF of 74.31±1.32% and MMAD of 1.70±0.03 µm suggesting a broncho-alveolar lung deposition facilitating the uptake of the nanoparticles by dendritic cells. Also, the PspA released from the dry powders maintained antigen stability (SDS-PAGE), integrity (Circular dichroism) and activity (lactoferrin binding assay). Moreover, the released antigen also maintained its antigenicity as determined by ELISA.

Development of a whole cell pneumococcal vaccine: BPL inactivation, cGMP production, and stability.

Pneumococcal infections impose a large burden of disease on the human population, mainly in developing countries, and the current pneumococcal vaccines offer serotype-specific protection, but do not cover all pathogenic strains, leaving populations vulnerable to disease caused by non-vaccine serotypes. The pneumococcal whole cell vaccine is a low-cost strategy based on non-capsular antigens common to all strains, inducing serotype-independent immunity. Therefore, we developed the process for the cGMP production of this cellular vaccine. Initially, three engineering runs and two cGMP runs were performed in 60-L bioreactors, demonstrating the consistency of the production process, as evaluated by the growth curves, glucose consumption and metabolite formation (lactate and acetate). Cell recovery by tangential filtration was 92 ± 13 %. We optimized the conditions for beta-propiolactone (BPL) inactivation of the bacterial suspensions, establishing a maximum cell density of OD600 between 27 and 30, with a BPL concentration of 1:4000 (v/v) at 150 rpm and 4 °C for 30 h. BPL was hydrolyzed by heating for 2h at 37 °C. The criteria and methods for quality control were defined using the engineering runs and the cGMP Lots passed all specifications. cGMP vaccine Lots displayed high potency, inducing between 80 and 90% survival in immunized mice when challenged with virulent pneumococci. Sera from mice immunized with the cGMP Lots recognized several pneumococcal proteins in the extract of encapsulated strains by Western blot. The cGMP whole cell antigen bulk and whole cell vaccine product lots were shown to be stable for up to 12 and 18 months, respectively, based upon survival assays following i.p. challenge. Our results show the consistency and stability of the cGMP whole cell pneumococcal vaccine lots and demonstrate the feasibility of production in a developing country setting.

Conjugation of polysaccharide 6B from Streptococcus pneumoniae with pneumococcal surface protein A: PspA conformation and its effect on the immune response.

Despite the substantial beneficial effects of incorporating the 7-valent pneumococcal conjugate vaccine (PCV7) into immunization programs, serotype replacement has been observed after its widespread use. As there are many serotypes currently documented, the use of a conjugate vaccine relying on protective pneumococcal proteins as active carriers is a promising alternative to expand PCV coverage. In this study, capsular polysaccharide serotype 6B (PS6B) and recombinant pneumococcal surface protein A (rPspA), a well-known protective antigen from Streptococcus pneumoniae, were covalently attached by two conjugation methods. The conjugation methodology developed by our laboratory, employing 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM) as an activating agent through carboxamide formation, was compared with reductive amination, a classical methodology. DMT-MM-mediated conjugation was shown to be more efficient in coupling PS6B to rPspA clade 1 (rPspA1): 55.0% of PS6B was in the conjugate fraction, whereas 24% was observed in the conjugate fraction with reductive amination. The influence of the conjugation process on the rPspA1 structure was assessed by circular dichroism. According to our results, both conjugation processes reduced the alpha-helical content of rPspA; reduction was more pronounced when the reaction between the polysaccharide capsule and rPspA1 was promoted between the carboxyl groups than the amine groups (46% and 13%, respectively). Regarding the immune response, both conjugates induced functional anti-rPspA1 and anti-PS6B antibodies. These results suggest that the secondary structure of PspA1, as well as its reactive groups (amine or carboxyl) involved in the linkage to PS6B, may not play an important role in eliciting a protective immune response to the antigens.

Quantification of capsular polysaccharide of Streptococcus pneumoniae serotype 14 in culture broth samples.

Streptococcus pneumoniae is a major cause of mortality in underdeveloped countries, where more than one million people die from pneumococcal disease every year. Vaccines are the most efficient method for preventing the infection and are based on the capsular polysaccharide (PS) protection. The serotype 14 is the most frequent in pediatric infections worldwide. This study aimed to establish a quantification protocol for PS present in culture broth samples of S. pneumoniae serotype 14 (PS14) and use this protocol for selection of the best PS14 producer strain. Phenol-sulfuric, HPSEC, competitive ELISA, and sandwich ELISA methods were tested for PS14 quantification. Sandwich ELISA was the method with the best reproducibility and sensitivity and the least susceptible to interferences. The quantification limit and detection limit of this method were 0.99 and 0.57 ng/mL, respectively. Statistical analysis was performed to calculate the coefficient of variation (CV) intraassay (1-3% intraplate and 2-6% interplate) and interassay (11-15%) and the reproducibility in different days (CV<20%). The sandwich ELISA allows us to select, among six strains evaluated, the strain 5287 as the best PS14 producer (11.68 mg PS14/biomass) and it was shown to be the best choice for measurement of pneumococcal polysaccharides in culture broth samples.

Humoral immune response of a pneumococcal conjugate vaccine: capsular polysaccharide serotype 14-Lysine modified PspA.

Polysaccharide-protein conjugates are so far the current antigens used for pneumococcal vaccines for children under 2 years of age. In this study, pneumococcal surface protein A (PspA) was used as a carrier protein for pneumococcal capsular polysaccharide serotype 14 as an alternative to broaden the vaccine coverage. PspA was modified by reductive amination with formaldehyde in order to improve the specificity of the reaction between protein and polysaccharide, inhibiting polymerization and the gel formation reaction. In the synthesis process, the currently used activator, 1-[3-(dimethylamine)propyl]-3-ethylcarbodiimide hydrochloride (EDAC) was substituted for 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride (DMT-MM). BALB/c mice were immunized with either the PS14-mPspA conjugate or the co-administered components in a three dose regimen and sera from the immunized animals were assayed for immunity induced against both antigens: PS14 and mPspA. Modification of more than 70% of lysine residues from PspA (mPspA) did not interfere in the immune response as evaluated by the anti-PspA titer and C3 complement deposition assay. Sera of mice immunized with conjugated PS14-mPspA showed similar IgG titers, avidity and isotype profile as compared to controls immunized with PspA or mPspA alone. The complement deposition was higher in the sera of mice immunized with the conjugate vaccine and the opsonophagocytic activity was similar for both sera. Conjugation improved the immune response against PS14. The anti PS14 IgG titer was higher in sera of mice immunized with the conjugate than with co-administered antigens and presented an increased avidity index, induction of a predominant IgG1 isotype and increased complement deposition on a bacteria with a surface serotype 14. These results strongly support the use of PspA as carrier in a conjugate vaccine where both components act as antigens.

Production and purification of recombinant fragment of pneumococcal surface protein A (PspA) in Escherichia coli

New conjugated vaccines against Streptococcus pneumoniae are being developed using pneumococcal surfaceproteins as carriers. The pneumococcal surface protein A (PspA) was selected as carrier because it is indispensablefor virulence of S. pneumoniae. The PspA can be classified into 3 families according to the homology of proteinsequences, within each family there is immunological cross-reactivity and PspA from family 1 or 2 are present in99% of strains associated with pneumococcal invasive disease. Hence, the purpose of this work was to develop an industrial production and purification process of His-tagged recombinant fragment of PspA in E. coli BL21 (DE3),rfPspA245 from family 1. Fed-batch cultivations in 5-L bioreactors with defined medium were carried out using glycerol as carbon source. Itwas obtained circa 60 g/L of dry cell weight and 3.0 g/L of rfPspA. Cells were disrupted with 96.7% of efficiency by high pressure continuous homogenizer. The clarification step was done by centrifugation. The results ofchromatographic steps were analyzed by densitometry of SDS-PAGE protein bands. Using the chromatographicsequence anion exchange (Q-Sepharose) followed by metal affinity (IMAC-Sepharose), the rfPspA245 was obtained with 67% and 97% of purity respectively for each step and final recovery of 23%. In conclusion, the purification process was developed and rfPspA245 was obtained with high purity, but the recovery should still be improved.