Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
Add more filters










Database
Publication year range
1.
Langmuir ; 40(18): 9579-9591, 2024 May 07.
Article in English | MEDLINE | ID: mdl-38657205

ABSTRACT

Herein, a fiber-supported iron-based ionic liquid as a type of fibrous catalyst has been developed for the synthesis of bioactive 3,4-dihydropyrimidin-2-(1H)-ones (DHPMs) via three-component Biginelli reactions in a cleaner manner. The described fibrous catalyst was obtained from the commercially available polyetheretherketone (PEEK) fiber by postfunctionalization processes and was characterized and analyzed in detail by means of diversified technologies. Furthermore, the fiber-supported iron-based ionic liquids could mediate the classical three-component Biginelli reactions to proceed smoothly to gain a variety of substituted DHPMs with yields of up to 99%. The superior catalytic activities of the fibrous catalyst were ascribed to the quasi-homogeneous medium by ionic liquids generated in the surface layer of the PEEK fiber, which could afford an appropriate reaction zone and could further be available for the aggregation of substrates to facilitate the three-component reaction. Notably, the fibrous catalyst is available for recycling over 10 runs just by a pair of tweezers, and the operational procedure was capable of enlarging the catalytic system to the gram-scale without any performance degradation, which provided a cleaner manner to take advantage of the iron-based catalyst in organic synthesis with potential industrialization prospects.

2.
Langmuir ; 40(17): 8950-8960, 2024 Apr 30.
Article in English | MEDLINE | ID: mdl-38623603

ABSTRACT

Highly selective synthesis of primary amines from renewable biomass has attracted increasing attention, but it still faces great challenges in chemical industry applications. In this study, an electron-rich Ru catalyst was constructed by doping N into coffee biochar using a one-pot carbonization method (Ru/NCB-600). Ru/NCB-600 showed high catalytic activity and yield for the reductive amination of furfural with green and cheap NH3 and H2. The excellent catalytic performance of Ru/NCB-600 was closely correlated to the formation of electron-rich Ruδ- species (Ruδ--Nxδ+), which endowed Ru/NCB-600 with an enhanced H2 adsorption and activation ability. Ru/NCB-600 showed a high formation rate of 95.6 gfurfurylamine·gRu-1·h-1 and a high yield of furfurylamine (98.6%) at 50 °C. Ru/NCB-600 can also be used for the reductive amination of various carbonyl compounds in good to excellent yield (95.4-99%). This study thus provides a potential pathway for the highly selective reductive amination of carbonyl compounds by regulating the electron density of Ru.

3.
Langmuir ; 39(25): 8801-8813, 2023 Jun 27.
Article in English | MEDLINE | ID: mdl-37314820

ABSTRACT

Selective reduction of nitroaromatics to the corresponding aromatic amines is extremely an attractive chemical process for both fundamental research and potential commercial applications. Herewith, we report that a highly dispersed Cu catalyst supported on H3PO4-activated coffee biochar and the resulting Cu/PBCR-600 catalyst show complete conversion of the nitroaromatics and >97.0% selectivity for the corresponding aromatic amines. The TOF of catalyzing the reduction of nitroaromatics (1.55-460.74 min-1) is approximately 2 to 15 times higher than those of previously reported non-noble and even noble metal catalysts. Additionally, Cu/PBCR-600 also shows high stability in catalytic recycles. Furthermore, it exhibits long-term catalytic stability (660 min) for practical application in a continuous-flow reactor. The characterizations and activity tests reveal that Cu0 existing in Cu/PBCR-600 acts as an active site in nitroaromatics reduction. Also, the further characterization by FTIR and UV-vis demonstrates that N, P co-doped coffee biochar could selectively adsorb and activate the nitro group of nitroaromatics.

4.
Zhong Nan Da Xue Xue Bao Yi Xue Ban ; 48(10): 1506-1517, 2023 Oct 28.
Article in English, Chinese | MEDLINE | ID: mdl-38432880

ABSTRACT

OBJECTIVES: At present, the doctor-patient relationship is tense. The prevalence of negative emotions, such as depression and anxiety, among healthcare workers is increasing every year. Negative attitudes of medical workers toward mental problems may aggravate the doctor-patient conflict and psychological problems of medical workers. This study aims to explore the complex network relationships between outpatient medical workers' attitudes toward mental problems, doctor-patient relationships, and their depression/anxiety levels. METHODS: A total of 578 outpatient medical staff from the Second Xiangya Hospital of Central South University (167 males, 411 females) completed questionnaires on their attitudes toward mental problems, doctor-patient relationships, and depression/anxiety symptoms. Network analysis was conducted separately to construct the "attitude towards mental problems-doctor-patient relationship network" and "depression-anxiety related network". RESULTS: The edge between "M15 (insulting words)" and "D8 (waste time)" showed the strongest strength in the "attitude towards mental problems-doctor-patient relationship network", and "M15 (insulting words)" had the highest bridge strength in the network. For the analysis of emotional variables, "P1 (anhedonia)" showed the most obvious association with "D10 (communication difficulties)" in the doctor-patient relationship and "M2 (poor quality of life)" in the psychiatric attitudes, and "P1 (anhedonia)" was the key bridge symptom in the network. CONCLUSIONS: The "insulting words" may be an intervention target for medical workers' attitudes toward mental problems. The "anhedonia" in depression is the potential symptom that needs to be treated. Intervention targeting these variables may be beneficial to improve the mental health level of medical workers and the doctor-patient relationship.


Subject(s)
Anhedonia , Depression , Female , Male , Humans , Physician-Patient Relations , Quality of Life , Anxiety , Health Personnel
5.
Langmuir ; 36(39): 11589-11599, 2020 Oct 06.
Article in English | MEDLINE | ID: mdl-32894945

ABSTRACT

Catalytic hydrogenations represent fundamental processes and allow for atom-efficient and clean functional group transformations for the production of chemical intermediates and fine chemicals in chemical industry. Herein, the Ru/CoO nanocomposites have been constructed and applied as nanocatalysts for the hydrogenation of phenols and furfurals into the corresponding cyclohexanols and tetrahydrofurfuryl alcohols, respectively. The functionalized ionic liquid acted not only as a ligand for stabilizing the Ru/CoO nanocatalyst but also as a thermoregulated agent. The as-obtained nanocatalyst showed superior activity, and it could be conveniently recovered via the thermoregulating phase separation. In six recycle experiments, the catalysts maintained excellent performance. It was observed that the catalytic performance highly hinged on the molar ratio of Ru to Co in the nanocatalyst. The catalyst characterization was carried out by high-resolution transmission electron microscopy (HRTEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray photoelectron spectroscopy, X-ray diffraction, high-resolution mass spectrometry, Fourier transform infrared, nuclear magnetic resonance, and UV-vis. Especially, the characterization by HRTEM and HAADF-STEM images of the nanocatalyst demonstrated that Ru(0) and Co(II) species were distributed uniformly and the Ru and Co(II) species were close to each other. However, Co(0) was generated and an electronic transfer from Co to Ru species could occur under the hydrogenation conditions. The 13C NMR characterization indicated further that Co(II) sites were mainly responsible for phenol adsorption. Meanwhile, the adjacent electron-rich Ru(0) sites can promote H2 dissociation and favor for the sequential hydrogenation.

6.
ChemSusChem ; 13(18): 4954-4966, 2020 Sep 18.
Article in English | MEDLINE | ID: mdl-32666698

ABSTRACT

Selective transformation of glycerol to propanal (PA) provides a feasible route towards the sustainable synthesis of high value-added chemicals. In this work, zirconium phosphate (ZrP) was studied as support and Ru and Co as metal sites for glycerol hydrogenolysis in a continuous-flow reactor. It was found that ZrP-supported Co-O species had a moderate selectivity to PA (49.5 %) in glycerol hydrogenolysis. Notably, once Ru species were doped into CoO/ZrP, the resulting catalyst exhibited not only an outstanding catalytic performance for glycerol hydrogenolysis to PA (a selectivity of 80.2 % at full conversion), but also a high stability at least a 50 h long-term performance. The spent catalyst could be regenerated by calcining in air to remove carbonaceous deposits. Characterization indicated that the acid sites on ZrP played a very critical role in the dehydration of glycerol into acrolein (AE), that the distribution of Co was uniform, basically consistent with that of Zr, P and Ru, and that an especially close contact between Co-O and Ru species was formed on Ru/CoO/ZrP catalyst. The further activity tests and characterizations confirmed that there was a strong interaction between the dispersed Co-O species and Ru0 nanoparticles, which endowed Ru sites with high electronic density. This effect could play a role in facilitating the dissociation of H2 , and thus in promoting the hydrogenation reaction. Besides, DFT calculations suggested that the Co-O species can adsorb more strongly the C=C bond of the intermediate AE on a highly coordinatively unsaturated Co (Cocus ) site and thus lead to preferential hydrogenation at the C=C bond of AE to PA.

SELECTION OF CITATIONS
SEARCH DETAIL
...