ABSTRACT
The industrial catalysts utilized for propane dehydrogenation (PDH) to propylene, an important alternative to petroleum-based cracking processes, either use expensive metals or metal oxides that are environmentally unbenign. We report that a typically less-active oxide, titanium oxide (TiO2), can be combined with earth-abundant metallic nickel (Ni) to form an unconventional Ni@TiOx catalyst for efficient PDH. The catalyst demonstrates a 94% propylene selectivity at 40% propane conversion and superior stability under industrially relevant conditions. Complete encapsulation of Ni nanoparticles was allowed at elevated temperatures (>550°C). A mechanistic study suggested that the defective TiOx overlayer consisting of tetracoordinated Ti sites with oxygen vacancies is catalytically active. Subsurface metallic Ni acts as an electronic promoter to accelerate carbon-hydrogen bond activation and hydrogen (H2) desorption on the TiOx overlayer.
ABSTRACT
Electrochemical CO2 reduction to value-added chemicals by renewable energy sources is a promising way to implement the artificial carbon cycle. During the reaction, especially at high current densities for practical applications, the complex interaction between the key intermediates and the active sites would affect the selectivity, while the reconfiguration of electrocatalysts could restrict the stability. This paper describes the fabrication of Ag/C catalysts with a well-engineered interfacial structure, in which Ag nanoparticles are partially encapsulated by C supports. The obtained electrocatalyst exhibits CO Faradaic efficiencies (FEs) of over 90% at current densities even as high as 1.1 A/cm2. The strong interfacial interaction between Ag and C leads to highly localized electron density that promotes the rate-determining electron transfer step by enhancing the adsorption and the stabilization of the key *COOâ intermediate. In addition, the partially encapsulated structure prevents the reconfiguration of Ag during the reaction. Stable performance for over 600 h at 500 mA/cm2 is achieved with CO FE maintaining over 95%, which is among the best stability with such a high selectivity and current density. This work provides a novel catalyst design showing the potential for the practical application of electrochemical reduction of CO2.
ABSTRACT
OBJECTIVE: No study has systematically investigated the quality of long-term care delivered to the rural older people with chronic diseases, such as atrial fibrillation (AF) in China. This study aims to provide contemporary data on the prevalence and awareness of AF among the older population in rural China and to evaluate healthcare knowledge and delivery by village doctors. DESIGN: A cross-sectional study. SETTING: Rural villages in Daqiao and Xiaoji towns of Jiangsu Province, China. PARTICIPANTS: Rural population aged ≥65 years. OUTCOME MEASURES: AF was identified using 12-lead electrocardiography in the first-step (government-led health examination) and single-lead electrocardiography in the second-step (in-house AF screening). Questionnaire surveys were designed for the AF patients and their village doctors. RESULTS: Among 31,342 permanent residents, 12,630 (40.3 %) declined, 7,956 (25.3 %) participated in the first-step and 10,756 (34.3 %) in the second-step. The overall AF detection rate was 4.3 % (810/18,712). Of the 810 AF patients (mean age 76.1±5.9 years; 51.4 % female), 51.5 % were illiterate, only 2.6 % could use smartphone applications, and 8.1 % lived with their children. Common risk factors were older age, men, hypertension, diabetes, prior stroke, vascular disease, and congestive heart failure. Among the 402 patients with known AF, 367 were at high risk of stroke and 10.9 % (40/367) were anticoagulated. Only 17.6 % patients with known hypertension had blood pressure level <140/90 mmHg, and 6.0 % with known diabetes had a fasting blood glucose level ≤6.1 mmol/L. Only 7.3 % (9/122) village doctors reported having the knowledge of integrated care AF management. CONCLUSIONS: This study identified AF in 4.3 %, but AF management was suboptimal in rural China. The current village doctor-dominant rural healthcare system is far from delivering standardized AF management for older patients in rural China. There is an urgent need to empower the village doctors in optimising the care of AF patients.
ABSTRACT
The catalytic partial oxidation of methane (POM) presents a promising technology for synthesizing syngas. However, it faces severe over-oxidation over catalyst surface. Attempts to modify metal surfaces by incorporating a secondary metal towards C-H bond activation of CH4 with moderate O* adsorption have remained the subject of intense research yet challenging. Herein, we report that high catalytic performance for POM can be achieved by the regulation of O* occupation in the atomically dispersed (AD) MoNi alloy, with over 95% CH4 conversion and 97% syngas selectivity at 800 °C. The combination of ex-situ/in-situ characterizations, kinetic analysis and DFT (density functional theory) calculations reveal that Mo-Ni dual sites in AD MoNi alloy afford the declined O2 poisoning on Ni sites with rarely weaken CH4 activation for partial oxidation pathway following the combustion reforming reaction (CRR) mechanism. These results underscore the effectiveness of CH4 turnovers by the design of atomically dispersed alloys with tunable O* adsorption.
ABSTRACT
Photoelectrochemical seawater splitting is a promising route for direct utilization of solar energy and abundant seawater resources for H2 production. However, the complex salinity composition in seawater results in intractable challenges for photoelectrodes. This paper describes the fabrication of a bilayer stack consisting of stainless steel and TiO2 as a cocatalyst and protective layer for Si photoanode. The chromium-incorporated NiFe (oxy)hydroxide converted from stainless steel film serves as a protective cocatalyst for efficient oxygen evolution and retarding the adsorption of corrosive ions from seawater, while the TiO2 is capable of avoiding the plasma damage of the surface layer of Si photoanode during the sputtering of stainless steel catalysts. By implementing this approach, the TiO2 layer effectively shields the vulnerable semiconductor photoelectrode from the harsh plasma sputtering conditions in stainless steel coating, preventing surface damages. Finally, the Si photoanode with the bilayer stack inhibits the adsorption of chloride and realizes 167 h stability in chloride-containing alkaline electrolytes. Furthermore, this photoanode also demonstrates stable performance under alkaline natural seawater for over 50 h with an applied bias photon-to-current efficiency of 2.62%.
ABSTRACT
The structure of catalysts determines the performance of catalytic processes. Intrinsically, the electronic and geometric structures influence the interaction between active species and the surface of the catalyst, which subsequently regulates the adsorption, reaction, and desorption behaviors. In recent decades, the development of catalysts with complex structures, including bulk, interfacial, encapsulated, and atomically dispersed structures, can potentially affect the electronic and geometric structures of catalysts and lead to further control of the transport and reaction of molecules. This review describes comprehensive understandings on the influence of electronic and geometric properties and complex catalyst structures on the performance of relevant heterogeneous catalytic processes, especially for the transport and reaction over structured catalysts for the conversions of light alkanes and small molecules. The recent research progress of the electronic and geometric properties over the active sites, specifically for theoretical descriptors developed in the recent decades, is discussed at the atomic level. The designs and properties of catalysts with specific structures are summarized. The transport phenomena and reactions over structured catalysts for the conversions of light alkanes and small molecules are analyzed. At the end of this review, we present our perspectives on the challenges for the further development of structured catalysts and heterogeneous catalytic processes.
ABSTRACT
A systematic theoretical study probing the catalytic potential of metal-doped SnO2(110) was conducted. The incorporation of metals such as Zr, Ti, W, V, Hf, and Ge is shown to drive electron transfer to Sn. The increased charge of Sn is injected into anti-bonding orbitals, finely tuning the catalytic activity and reducing the overpotential to -0.34 V. AIMD simulations show the stability of the modified structures. This work sheds light on the rational design of low-cost metal oxides with a high catalytic performance for CO2ER to formate.
ABSTRACT
Photoelectrochemical (PEC) carbon dioxide (CO2) reduction (CO2R) holds the potential to reduce the costs of solar fuel production by integrating CO2 utilization and light harvesting within one integrated device. However, the CO2R selectivity on the photocathode is limited by the lack of catalytic active sites and competition with the hydrogen evolution reaction. On the other hand, serious parasitic light absorption occurs on the front-side-illuminated photocathode due to the poor light transmittance of CO2R cocatalyst films, resulting in extremely low photocurrent density at the CO2R equilibrium potential. This paper describes the design and fabrication of a photocathode consisting of crystal phase-modulated Ag nanocrystal cocatalysts integrated on illumination-reaction decoupled heterojunction silicon (Si) substrate for the selective and efficient conversion of CO2. Ag nanocrystals containing unconventional hexagonal close-packed phases accelerate the charge transfer process in CO2R reaction, exhibiting excellent catalytic performance. Heterojunction Si substrate decouples light absorption from the CO2R catalyst layer, preventing the parasitic light absorption. The obtained photocathode exhibits a carbon monoxide (CO) Faradaic efficiency (FE) higher than 90% in a wide potential range, with the maximum FE reaching up to 97.4% at -0.2 V vs. reversible hydrogen electrode. At the CO2/CO equilibrium potential, a CO partial photocurrent density of -2.7 mA cm-2 with a CO FE of 96.5% is achieved in 0.1 M KHCO3 electrolyte on this photocathode, surpassing the expensive benchmark Au-based PEC CO2R system.
ABSTRACT
In heterogeneous catalysis, the catalytic dehydrogenation reactions of hydrocarbons often exhibit a negative pressure dependence on hydrogen due to the competitive chemisorption of hydrocarbons and hydrogen. However, some catalysts show a positive pressure dependence for propane dehydrogenation, an important reaction for propylene production. Here we show that the positive activity dependence on H2 partial pressure of gallium oxide-based catalysts arises from metastable hydride mediation. Through in situ spectroscopic, kinetic and computational analyses, we demonstrate that under reaction conditions with H2 co-feeding, the dissociative adsorption of H2 on a partially reduced gallium oxide surface produces H atoms chemically bonded to coordinatively unsaturated Ga atoms. These metastable gallium hydride species promote C-H bond activation while inhibiting deep dehydrogenation. We found that the surface coverage of gallium hydride determines the catalytic performance. Accordingly, benefiting from proper H2 co-feeding, the alumina-supported, trace additive-modified gallium oxide catalyst GaOx-Ir-K/Al2O3 exhibited high activity and selectivity at high propane concentrations.
ABSTRACT
Gas diffusion electrodes (GDEs) mediate the transport of reactants, products and electrons for the electrocatalytic CO2 reduction reaction (CO2RR) in membrane electrode assemblies. The random distribution of ionomer, added by the traditional physical mixing method, in the catalyst layer of GDEs affects the transport of ions and CO2. Such a phenomenon results in elevated cell voltage and decaying selectivity at high current densities. This paper describes a pre-confinement method to construct GDEs with homogeneously distributed ionomer, which enhances mass transfer locally at the active centers. The optimized GDE exhibited comparatively low cell voltages and high CO Faradaic efficiencies (FE > 90%) at a wide range of current densities. It can also operate stably for over 220 h with the cell voltage staying almost unchanged. This good performance can be preserved even with diluted CO2 feeds, which is essential for pursuing a high single-pass conversion rate. This study provides a new approach to building efficient mass transfer pathways for ions and reactants in GDEs to promote the electrocatalytic CO2RR for practical applications.
ABSTRACT
The strong promotion effects of alkali/alkaline earth metals are frequently reported for heterogeneous catalytic processes such as propane dehydrogenation (PDH), but their functioning principles remain elusive. This paper describes the effect of the addition of calcium (Ca) on reducing the deactivation rate of platinum-tin (Pt-Sn) catalyzed PDH from 0.04 h-1 to 0.0098 h-1 at 873 K under a WHSV of 16.5 h-1 of propane. The Pt-Sn-Ca catalyst shows a high propylene selectivity of >96% with a propylene production rate of 41 molC3H6 (gPt h)-1 and â¼1% activity loss after regeneration. The combination of characterization and DFT simulations reveals that Ca acts as a structural promoter favoring the transition of Snn+ in the parent catalyst to Sn0 during reduction, and the latter is an electron donor that increases the electron density of Pt. This greatly suppresses coke formation from deep dehydrogenation. Moreover, it was found that Ca promotes the formation of a highly reactive and sintering-resistant sub-nano Pt-Sn alloy with a diameter of approximately 0.8 nm. These lead to high activity and selectivity for the Pt-Sn-Ca catalyst for PDH.
ABSTRACT
The electrochemical reduction of CO has drawn a large amount of attention due to its potential to produce sustainable fuels and chemicals by using renewable energy. However, the reaction's mechanism is not yet well understood. A major debate is whether the rate-determining step for the generation of multi-carbon products is C-C coupling or CO hydrogenation. This paper conducts an experimental analysis of the rate-determining step, exploring pH dependency, kinetic isotope effects, and the impact of CO partial pressure on multi-carbon product activity. Results reveal constant multi-carbon product activity with pH or electrolyte deuteration changes, and CO partial pressure data aligns with the theoretical formula derived from *CO-*CO coupling as the rate-determining step. These findings establish the dimerization of two *CO as the rate-determining step for multi-carbon product formation. Extending the study to commercial copper nanoparticles and oxide-derived copper catalysts shows their rate-determining step also involves *CO-*CO coupling. This investigation provides vital kinetic data and a theoretical foundation for enhancing multi-carbon product production.
ABSTRACT
BACKGROUND: There is no consensus on the usage of extended criteria donor (ECD) grafts in liver transplantation (LT) for acute-on-chronic liver failure (ACLF) patients. AIM: To summarize the experience of using ECD livers in ACLF-LT. METHODS: A retrospective cohort study was conducted, enrolling patients who underwent LT at the First Affiliated Hospital of Sun Yat-Sen University from January 2015 to November 2021. The patients were divided into ECD and non-ECD groups for analysis. RESULTS: A total of 145 recipients were enrolled in this study, of which ECD and non-ECD recipients accounted for 53.8% and 46.2%, respectively. Donation after cardiac death (DCD) recipients accounted for the minority compared with donation after brain death (DBD) recipients (16.6% vs 83.4%). Neither overall survival nor graft survival significantly differed between ECD and non-ECD and DCD and DBD recipients. ECD grafts were associated with a significantly higher incidence of early allograft dysfunction (EAD) than non-ECD grafts (67.9% vs 41.8%, P = 0.002). Postoperative outcomes between DCD and DBD recipients were comparable (P > 0.05). ECD graft (P = 0.009), anhepatic phase (P = 0.034) and recipient gamma glutamyltransferase (P = 0.016) were independent risk factors for EAD. Recipient preoperative number of extrahepatic organ failures > 2 (P = 0.015) and intraoperative blood loss (P = 0.000) were independent predictors of poor post-LT survival. CONCLUSION: Although related to a higher risk of EAD, ECD grafts can be safely used in ACLF-LT. The main factors affecting post-LT survival in ACLF patients are their own severe preoperative disease and intraoperative blood loss.
Subject(s)
Acute-On-Chronic Liver Failure , Liver Transplantation , Tissue and Organ Procurement , Humans , Liver Transplantation/adverse effects , Acute-On-Chronic Liver Failure/surgery , Acute-On-Chronic Liver Failure/etiology , Retrospective Studies , Blood Loss, Surgical , Donor Selection , Tissue Donors , Brain Death , Graft Survival , DeathABSTRACT
Photogenerated charge localization on material surfaces significantly affects photocatalytic performance, especially for multi-electron CO2 reduction. Dual single atom (DSA) catalysts with flexibly designed reactive sites have received significant research attention for CO2 photoreduction. However, the charge transfer mechanism in DSA catalysts remains poorly understood. Here, for the first time, a reversed electron transfer mechanism on Au and Co DSA catalysts is reported. In situ characterizations confirm that for CdS nanoparticles (NPs) loaded with Co or Au single atoms, photogenerated electrons are localized around the single atom of Co or Au. In DSA catalysts, however, electrons are delocalized from Au and accumulate around Co atoms. Importantly, combined advanced spectroscopic findings and theoretical computation evidence that this reversed electron transfer in Au/Co DSA boosts charge redistribution and activation of CO2 molecules, leading to highly significantly increased photocatalytic CO2 reduction, for example, Au/Co DSA loaded CdS exhibits, respectively, ≈2800% and 700% greater yields for CO and CH4 compared with that for CdS alone. Reversed electron transfer in DSA can be used for practical design for charge redistribution and to boost photoreduction of CO2 . Findings will be of benefit to researchers and manufacturers in DSA-loaded catalysts for the generation of solar fuels.
ABSTRACT
The complex reconstructed structure of materials can be revealed by global optimization. This paper describes a hybrid evolutionary algorithm (HEA) that combines differential evolution and genetic algorithms with a multi-tribe framework. An on-the-fly machine learning calculator is adopted to expedite the identification of low-lying structures. With a superior performance to other well-established methods, we further demonstrate its efficacy by optimizing the complex oxidized surface of Pt/Pd/Cu with different facets under (4 × 4) periodicity. The obtained structures are consistent with experimental results and are energetically lower than the previously presented model.
ABSTRACT
Electrochemical conversion of N2 into ammonia presents a sustainable pathway to produce hydrogen storage carrier but yet requires further advancement in electrocatalyst design and electrolyzer integration. This technology suffers from low selectivity and yield owing to the extremely strong N≡N bond and the exceptionally low solubility of N2 in aqueous systems. A high NH3 synthesis performance is restricted by the high activation energy of N≡N bond and the supply insufficiency of N2 to active sites. This paper describes the introduction of electron-rich Bi0 sites into Ag catalysts with a high-pressure electrolyzer that enables a dramatically enhanced Faradaic efficiency of 44.0% and yield of 28.43 µg cm-2 h-1 at 4.0 MPa. Combined with density functional theory results, in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy demonstrates that N2 reduction reaction follows an associative mechanism, in which a high coverage of N-N bond and -NH2 intermediates suggest electron-rich Bi0 boosts sound activation of N2 molecules and low hydrogenation barrier. The proposed strategy of engineering electrochemical catalysts and devices provides powerful guidelines for achieving industrial-level green ammonia production.
ABSTRACT
The grain boundaries (GBs) in copper (Cu) electrocatalysts have been suggested as active sites for CO2 electroreduction to ethanol. Nevertheless, the mechanisms are still elusive. Herein, we describe how GBs tune the activity and selectivity for ethanol on two representative Cu-GB models, namely Cu∑3/(111) GB and Cu∑5/(100) GB, using joint first-principles calculations and experiments. The unique geometric structures on the GBs facilitate the adsorption of bidentate intermediates, *COOH and *CHO, which are crucial for CO2 activation and CO protonation. The decreased CO-CHO coupling barriers on the GBs can be rationalized via kinetics analysis. Furthermore, when introducing GBs into Cu (100), the product is selectively switched from ethylene to ethanol, due to the stabilization effect for *CH3CHO and inapposite geometric structure for *O adsorption, which are validated by experimental trends. An overall 12.5 A current and a single-pass conversion of 5.18% for ethanol can be achieved over the synthesized Cu-GB catalyst by scaling up the electrode into a 25 cm2 membrane electrode assembly system.
ABSTRACT
Direct propane dehydrogenation (PDH) to propylene is a desirable commercial reaction but is highly endothermic and severely limited by thermodynamic equilibrium. Routes that oxidatively remove hydrogen as water have safety and cost challenges. We coupled chemical looping-selective hydrogen (H2) combustion and PDH with multifunctional ferric vanadate-vanadium oxide (FeVO4-VOx) redox catalysts. Well-dispersed VOx supported on aluminum oxide (Al2O3) provides dehydrogenation sites, and adjacent nanoscale FeVO4 acts as an oxygen carrier for subsequent H2 combustion. We achieved an integral performance of 81.3% propylene selectivity at 42.7% propane conversion at 550°C for 200 chemical looping cycles for the reoxidization of FeVO4. Based on catalytic experiments, spectroscopic characterization, and theory calculations, we propose a hydrogen spillover-mediated coupling mechanism. The hydrogen species generated at the VOx sites migrated to adjacent FeVO4 for combustion, which shifted PDH toward propylene. This mechanism is favored by the proximity between the dehydrogenation and combustion sites.
ABSTRACT
Construction of a "net-zero-emission" system through CO2 hydrogenation to methanol with solar energy is an eco-friendly way to mitigate the greenhouse effect. Traditional CO2 hydrogenation demands centralized mass production for cost reduction with mass water electrolysis for hydrogen supply. To achieve continuous reaction with intermittent and fluctuating flow of H2 on a small-scale for distributed application scenarios, modulating the catalyst interface environment and chemical adsorption capacity to adapt fluctuating reaction conditions is highly desired. This paper describes a distributed clean CO2 utilization system in which the surface structure of catalysts is carefully regulated. The Ni catalyst with unsaturated electrons loaded on In2 O3 can reduce the dissociation energy of H2 to overcome the slow response of intermittent H2 supply, exhibiting a faster response (12â min) than bare oxide catalysts (42â min). Moreover, the introduction of Ni enhances the sensitivity of the catalyst to hydrogen, yielding a Ni/In2 O3 catalyst with a good performance at lower H2 concentrations with a 15â times adaptability for wider hydrogen fluctuation range than In2 O3 , greatly reducing the negative impact of unstable H2 supplies derived from renewable energies.