Epithelial and stromal thickness profile and lens decentration in myopic orthokeratology / Perfil de espesor epitelial y estromal y descentrado del cristalino en ortoqueratología miope

Purpose: To study topographic epithelial and total corneal thickness changes in myopic subjects undergoing successful orthokeratology treatment in connection with the objective assessment of contact lens decentration. Methods: A prospective-observational and non-randomized study in 32 Caucasian myopic eyes undergoing Ortho-k for 3 months. Total, epithelial, and stromal thicknesses were studied before and after Ortho-k treatment, using optical coherence tomography with anterior segment application software. Central, paracentral, and mid-peripheral values are taken along 8 semi-meridians. Results: The central average total corneal thickness was 4.72 ± 1.04 μm thinner after Ortho-K. The paracentral corneal thickness showed no significant changes (p = 0.137), while the mid-peripheral corneal thickness was increased by 3.25 ± 1.6 μm associating this increase exclusively to the epithelial plot (p<0.001). When lens centration was assessed, a lens fitting decentration less than 1.0 mm was found for the whole sample, predominantly horizontal-temporal (87.5%) and vertical-inferior (50%) decentring. Corneal topographical analysis revealed a horizontal and vertical epithelial thickness asymmetric change profile with paracentral temporal thinnest values, and mid-peripheral nasal thickest values. Conclusions: The present study found a central corneal thinning induced by Ortho-k lenses in subjects with moderate myopia, only associated with a change in epithelial thickness, as well as mid-peripheral thickening, that seems to be mainly epithelial in origin. The authors also found a tendency of contact lens decentration toward temporal and inferior areas conditioning an asymmetric epithelial redistribution pattern.(AU)

Economic impact of periprosthetic hip fractures / Impacto económico de las fracturas periprotésicas de cadera

Introduction: Hip replacement is one of the most successful operations in orthopaedic surgery. Periprosthetic hip fractures (PPHF) have very serious consequences for the patient, and they also entail a very important economic impact on healthcare systems. The aim of the study was to provide the first detailed cost analysis of PPHF in a traumatology and orthopaedics service in a third level hospital in Spain. Methods: The study included all patients admitted between 2009 and 2019 with a diagnosis of “PPHF”. We assessed hospital stay cost, total cost of the operating theatre, cost of the implants used, analyses, consultations with other specialists, rehabilitation sessions, radiological tests, microbiology, blood transfusions and other surgical operations during the same admission. Results: 78 patients were included in the study, 49 women and 29 men, with a mean age of 78.74 years (R 45–92). 69 patients received surgical treatment, 75% had open reduction and internal fixation (ORIF), and 25% had revision surgery. The total cost was €1,139,650.17. The average cost was €14,610.90. Significantly higher costs were incurred for revision compared to ORIF treatments, admissions that lasted more than 30 days, and patients who required more than one operation during admission. The most costly factors were the hospital stay (46%), the cost of the surgery itself (35%), and the implants (24%). Conclusions: Revision arthroplasty versus ORIF treatment, admissions lasting more than 30 days, and patients requiring more than one operation on admission incurred significantly higher costs. The average cost, from a hospital perspective, generated by a PPHF was €14,610.90. The most costly factors were, in descending order, the hospital stay, the cost of the surgery itself, and the implants. It is necessary to establish protocols and updated therapeutic algorithms in the perioperative management of PPHF in order to reduce both morbidity rates and associated costs.(AU)

Introducción: La artroplastia de cadera es una de las operaciones con mejores resultados en cirugía ortopédica. Las fracturas periprotésicas de cadera (FPPC) tienen consecuencias muy graves para el paciente y además suponen un impacto económico muy importante para los sistemas sanitarios. El objetivo del estudio es realizar el primer análisis detallado de los costes de las FPPC en un Servicio de Cirugía Ortopédica y Traumatología en un hospital universitario de tercer nivel en España. Métodos: El estudio incluyó a todos los pacientes ingresados entre 2009 y 2019 con el diagnóstico de «FPPC». Se evaluaron el coste de la estancia hospitalaria, el coste total del quirófano, el coste de los implantes utilizados, los análisis de sangre, las consultas con otros especialistas, las sesiones de rehabilitación, las pruebas radiológicas, la microbiología, las transfusiones de sangre y otras intervenciones quirúrgicas durante el mismo ingreso. Resultados: Se incluyó a un total de 78 pacientes, 49 mujeres y 29 hombres, con una edad media de 78,74 años (R 45-92); 69 pacientes recibieron tratamiento quirúrgico, el 75% se sometió a reducción abierta y fijación interna (RAFI) y el 25% a revisión protésica. El coste total fue de 1.139.650,17 €. El coste medio fue de 14.610,90 €. Los costes fueron significativamente más elevados en la revisión protésica que en la RAFI, en los ingresos que duraron más de 30 días y en los pacientes que requirieron más de una intervención quirúrgica durante el ingreso. Los factores que más influyeron en el coste fueron la estancia hospitalaria (46%), el coste de la intervención quirúrgica (35%) y el de los implantes (24%). Conclusiones: La cirugía de revisión protésica frente a RAFI, los ingresos de más de 30 días y los pacientes que requirieron más de una intervención quirúrgica durante el ingreso supusieron costes significativamente mayores. El coste medio, desde el punto de vista hospitalario, generado por una FPPC fue de 14.610,90 €.(AU)

[Artículo traducido] Impacto económico de las fracturas periprotésicas de cadera / Economic impact of periprosthetic hip fractures

Introduction: Hip replacement is one of the most successful operations in orthopaedic surgery. Periprosthetic hip fractures (PPHF) have very serious consequences for the patient, and they also entail a very important economic impact on healthcare systems. The aim of the study was to provide the first detailed cost analysis of PPHF in a traumatology and orthopaedics service in a third level hospital in Spain. Methods: The study included all patients admitted between 2009 and 2019 with a diagnosis of “PPHF”. We assessed hospital stay cost, total cost of the operating theatre, cost of the implants used, analyses, consultations with other specialists, rehabilitation sessions, radiological tests, microbiology, blood transfusions and other surgical operations during the same admission. Results: 78 patients were included in the study, 49 women and 29 men, with a mean age of 78.74 years (R 45–92). 69 patients received surgical treatment, 75% had open reduction and internal fixation (ORIF), and 25% had revision surgery. The total cost was €1,139,650.17. The average cost was €14,610.90. Significantly higher costs were incurred for revision compared to ORIF treatments, admissions that lasted more than 30 days, and patients who required more than one operation during admission. The most costly factors were the hospital stay (46%), the cost of the surgery itself (35%), and the implants (24%). Conclusions: Revision arthroplasty versus ORIF treatment, admissions lasting more than 30 days, and patients requiring more than one operation on admission incurred significantly higher costs. The average cost, from a hospital perspective, generated by a PPHF was €14,610.90. The most costly factors were, in descending order, the hospital stay, the cost of the surgery itself, and the implants. It is necessary to establish protocols and updated therapeutic algorithms in the perioperative management of PPHF in order to reduce both morbidity rates and associated costs.(AU)

Introducción: La artroplastia de cadera es una de las operaciones con mejores resultados en cirugía ortopédica. Las fracturas periprotésicas de cadera (FPPC) tienen consecuencias muy graves para el paciente y además suponen un impacto económico muy importante para los sistemas sanitarios. El objetivo del estudio es realizar el primer análisis detallado de los costes de las FPPC en un Servicio de Cirugía Ortopédica y Traumatología en un hospital universitario de tercer nivel en España. Métodos: El estudio incluyó a todos los pacientes ingresados entre 2009 y 2019 con el diagnóstico de «FPPC». Se evaluaron el coste de la estancia hospitalaria, el coste total del quirófano, el coste de los implantes utilizados, los análisis de sangre, las consultas con otros especialistas, las sesiones de rehabilitación, las pruebas radiológicas, la microbiología, las transfusiones de sangre y otras intervenciones quirúrgicas durante el mismo ingreso. Resultados: Se incluyó a un total de 78 pacientes, 49 mujeres y 29 hombres, con una edad media de 78,74 años (R 45-92); 69 pacientes recibieron tratamiento quirúrgico, el 75% se sometió a reducción abierta y fijación interna (RAFI) y el 25% a revisión protésica. El coste total fue de 1.139.650,17 €. El coste medio fue de 14.610,90 €. Los costes fueron significativamente más elevados en la revisión protésica que en la RAFI, en los ingresos que duraron más de 30 días y en los pacientes que requirieron más de una intervención quirúrgica durante el ingreso. Los factores que más influyeron en el coste fueron la estancia hospitalaria (46%), el coste de la intervención quirúrgica (35%) y el de los implantes (24%). Conclusiones: La cirugía de revisión protésica frente a RAFI, los ingresos de más de 30 días y los pacientes que requirieron más de una intervención quirúrgica durante el ingreso supusieron costes significativamente mayores. El coste medio, desde el punto de vista hospitalario, generado por una FPPC fue de 14.610,90 €.(AU)

Economic impact of periprosthetic hip fractures. / [Artículo traducido] Impacto económico de las fracturas periprotésicas de cadera.

INTRODUCTION: Hip replacement is one of the most successful operations in orthopaedic surgery. Periprosthetic hip fractures (PPHF) have very serious consequences for the patient, and they also entail a very important economic impact on healthcare systems. The aim of the study was to provide the first detailed cost analysis of PPHF in a traumatology and orthopaedics service in a third level hospital in Spain. METHODS: The study included all patients admitted between 2009 and 2019 with a diagnosis of «PPHF¼. We assessed hospital stay cost, total cost of the operating theatre, cost of the implants used, analyses, consultations with other specialists, rehabilitation sessions, radiological tests, microbiology, blood transfusions and other surgical operations during the same admission. RESULTS: Seventy-eight patients were included in the study, 49 women and 29 men, with a mean age of 78.74 years (R 45-92). Sixty-nine patients received surgical treatment, 75% had open reduction and internal fixation (ORIF), and 25% had revision surgery. The total cost was €1 139 650.17. The average cost was €14 610.90. Significantly higher costs were incurred for revision compared to ORIF treatments, admissions that lasted more than 30 days, and patients who required more than one operation during admission. The most costly factors were the hospital stay (46%), the cost of the surgery itself (35%), and the implants (24%). CONCLUSIONS: Revision arthroplasty versus ORIF treatment, admissions lasting more than 30 days, and patients requiring more than one operation on admission incurred significantly higher costs. The average cost, from a hospital perspective, generated by a PPHF was €14 610.90. The most costly factors were, in descending order, the hospital stay, the cost of the surgery itself, and the implants. It is necessary to establish protocols and updated therapeutic algorithms in the perioperative management of PPHF in order to reduce both morbidity rates and associated costs.

Economic impact of periprosthetic hip fractures.

INTRODUCTION: Hip replacement is one of the most successful operations in orthopaedic surgery. Periprosthetic hip fractures (PPHF) have very serious consequences for the patient, and they also entail a very important economic impact on healthcare systems. The aim of the study was to provide the first detailed cost analysis of PPHF in a traumatology and orthopaedics service in a third level hospital in Spain. METHODS: The study included all patients admitted between 2009 and 2019 with a diagnosis of "PPHF". We assessed hospital stay cost, total cost of the operating theatre, cost of the implants used, analyses, consultations with other specialists, rehabilitation sessions, radiological tests, microbiology, blood transfusions and other surgical operations during the same admission. RESULTS: 78 patients were included in the study, 49 women and 29 men, with a mean age of 78.74 years (R 45-92). 69 patients received surgical treatment, 75% had open reduction and internal fixation (ORIF), and 25% had revision surgery. The total cost was €1,139,650.17. The average cost was €14,610.90. Significantly higher costs were incurred for revision compared to ORIF treatments, admissions that lasted more than 30 days, and patients who required more than one operation during admission. The most costly factors were the hospital stay (46%), the cost of the surgery itself (35%), and the implants (24%). CONCLUSIONS: Revision arthroplasty versus ORIF treatment, admissions lasting more than 30 days, and patients requiring more than one operation on admission incurred significantly higher costs. The average cost, from a hospital perspective, generated by a PPHF was €14,610.90. The most costly factors were, in descending order, the hospital stay, the cost of the surgery itself, and the implants. It is necessary to establish protocols and updated therapeutic algorithms in the perioperative management of PPHF in order to reduce both morbidity rates and associated costs.

Can straw-biochar mulching mitigate erosion of wildfire-degraded soils under extreme rainfall?

High severity wildfires cause a drastic alteration of soil carbon cycling - both oxidising and thermally altering soil organic matter (SOM) - and usually are followed by strong runoff and erosion events. To restore wildfire-degraded soils, SOM needs to be rebuilt while soil erosion is prevented. Post-fire straw mulching has been shown to mitigate soil erosion by providing a protective cover against rainsplash. However, SOM takes many decades or centuries to rebuilt naturally. Biochar, co-applied with straw to the soil surface can replace the SOM of the O-horizon, while the stabilised soil - by straw mulching - may gain in SOM naturally and by downward movement of biochar. We conducted a field study to test if straw-only and straw-biochar co-application could restore soils degraded by wildfire in one high burn severity (HBS) and one moderate burn severity (MBS) study area in southern Portugal and Spain, respectively, by monitoring erosion and SOM for the most intense rainfall period of the first post-fire year. Burned sites were characterized for soil and sediment physical properties, TOC content, SOM quality by thermogravimetry (DTG) and nuclear magnetic resonance (NMR 13C) spectroscopy. Straw-biochar mulching significantly reduced soil erosion by 76% and 65% in the HBS and MBS sites, respectively, in both cases similar to the erosion reduction by straw-only mulching. DTG and NMR 13C indicated that a relatively small proportion of the biochar eroded, i.e. 0.7%, indicating that co-application of straw with biochar may help restore the SOC lost in the wildfire in the medium term. The amount of SOM eroded was lower with straw-biochar mulching than in the untreated plots for both study areas. Straw-biochar mulching mitigates erosion of wildfire-degraded soils under extreme rainfall, while a relatively small proportion of the biochar is lost by erosion. Future studies need to monitor medium term effects.

Pyrolysis-gas chromatography-isotope ratio mass spectrometry for monitoring natural additives in polylactic acid active food packages.

Compound-specific isotope analysis (CSIA) usually requires preparative steps (pretreatments, extraction, derivatization) to get amenable chromatographic analytes from bulk geological, biological or synthetic materials. Analytical pyrolysis (Py-GC/MS) can help to overcome such sample manipulation. This communication describe the results obtained by hyphenating analytical pyrolysis (Py-GC) with carbon isotope-ratio mass spectrometry (IRMS) for the analysis of a polylactic acid (PLA) a based bio-plastic extruded with variable quantities of a natural plant extract or oregano essential oil. The chemical structural information of pyrolysates was first determined by conventional analytical pyrolysis and the measure of δ13C in specific compounds was done by coupling a pyrolysis unit to a gas chromatograph connected to a continuous flow IRMS unit (Py-GC-C-IRMS). Using this Py-CSIA device it was possible to trace natural additives with depleted δ13C values produced by C3 photosystem vegetation (cymene: -26.7‰±2.52; terpinene: -27.1‰±0.13 and carvacrol: -27.5‰±1.80 from oregano and two unknown structures: -23.3‰±3.32 and -24.4‰±1.70 and butyl valerate: -24.1‰±3.55 from Allium spp.), within the naturally isotopically enriched bio-plastic backbone derived from corn (C4 vegetation) starch (cyclopentanones: -14.2‰±2.11; lactide enantiomers: -9.2‰±1.56 and larger polymeric units: -17.2‰±1.71). This is the first application of Py-CSIA to characterize a bio-plastic and is shown as a promising tool to study such materials, providing not only a fingerprinting, but also valuable information about the origin of the materials, allowing the traceability of additives and minimizing sample preparation.

Pyrolysis-gas chromatography-isotope ratio mass spectrometry of polyethylene.

Polyethylene is probably the most used plastic material in daily life and its accurate analysis is of importance. In this communication the chemical structure of polyethylenes is studied in detail using conventional analytical pyrolysis (Py-GC/MS), bulk stable isotopic analysis (IRMS) and pyrolysis compound specific stable isotopic analysis (Py-CSIA) to measure stable isotope proportions (δ(13)C, δ(15)N and δD) of polyethylene pyrolysis compounds. Polyethylene pyrolysis yields triplet peaks of n-alkanes, α-alkenes and α,ω-alkanedienes. No differences were found for bulk δ(13)C among different polyethylene types. However, conspicuous differences in δD were evident. It was possible to assign structure δ(13)C and δD values to specific polyethylene pyrolysis products in the range 12-18 carbon chain length. Conspicuous differences were found for the pyrolysis products with unsaturated moieties showing significant higher δD values than saturated chains (alkanes) that were deuterium depleted. In addition, a full isotopic fingerprinting (δ(13)C, δ(15)N and δD) for a dye (o-chloroaniline) contained in a polyethylene is reported. To the best of our knowledge this is the first application Py-CSIA to the study of a synthetic polymer. This hyphenated analytical technique is a promising tool to study synthetic materials, providing not only a fingerprinting, but also allowing the traceability of the polymerization process and the origin of the materials.

Utilidad de la oximetría cerebral en el manejo de la persistencia del conducto arterioso / Cerebral oximetry in the management of ductus arteriosus

No disponible

Detection of cylindrospermopsin toxin markers in cyanobacterial algal blooms using analytical pyrolysis (Py-GC/MS) and thermally-assisted hydrolysis and methylation (TCh-GC/MS).

The hepatotoxin cylindrospermopsin (CYN) is produced by freshwater cyanobacteria becoming an emerging threat for human health. Methods for the rapid determination of CYN in environmental samples are needed. Conventional analytical pyrolysis (Py-GC/MS) and thermally-assisted hydrolysis and methylation (TCh-GC/MS) were used to study a CYN standard, two Aphanizomenon ovalisporum cultures (CYN+) and one culture of Cylindrospermopsis raciborskii (CYN-). A micro-furnace pyrolyzer was used directly attached to a GC/MS system fitted with a 30 m × 250 µm × 0.25 µm film thickness column (14% cyanopropyl phenyl, 86% dimethyl polysiloxane pahase composition). Oven temperature was held at 50 °C for 1 min and increased to 100 °C at 30 °C min(-1), from 100 °C to 300 °C at 10 °C min(-1), and stabilized at 300 °C for 10 min using helium (1 mL min(-1)) as carrier gas. Pyrolysis at 500 °C yield over 70 compounds with 20 specific for CYN+ samples. Two peaks containing a diagnostic fragment (m/z 194) were found at 25.0 and 28.9 min only in CYN+ samples. Fewer peaks with limited diagnostic value were released after TCh-GC/MS, including breakdown products and TMAH adducts. A compound was detected that may correspond to the CYN molecule (MW 415 Da) thermoevaporation product after the loss of SO3 (MW 80 Da). This TCh-GC/MS peak (m/z 336) together with the fragments obtained by conventional Py-GC/MS (m/z 194) are diagnostic ions with potential use for the direct detection of CYN toxin in environmental samples at last with an estimated 5 ppm detection threshold.

Relative and combined effects of selenium, protein deficiency and ethanol on hepatocyte ballooning and liver steatosis.

Oxidative damage plays a key role in alcohol-mediated liver alterations. Selenium, a potent antioxidant, is decreased in alcoholics. This study was conducted to analyse if the supplementation with selenium may alter liver changes in a murine model fed ethanol and/or a 2 % protein-containing diet, following the Lieber-DeCarli design. Adult male Sprague Dawley rats were divided into eight groups which received the Lieber-DeCarli control diet; an isocaloric, 36 % ethanol-containing diet; an isocaloric, 2 % protein-containing diet; and an isocaloric diet containing 2 % protein and 36 % ethanol diet; and other similar four groups to which selenomethionine (1 mg/kg body weight) was added. After sacrifice (5 weeks later), liver fat amount and hepatocyte areas of pericentral and periportal cells were measured, and liver and serum selenium, activity of liver glutathione peroxidase (GPX), and liver malondialdehyde were determined. Ethanol-fed rats showed increased hepatocyte areas and fat accumulation especially when ethanol was added to a 2 % protein diet. Selenium caused a decrease in hepatocyte ballooning and liver fat amount, but an increase in GPX activity, and a marked increase in serum and liver selenium. The present study demonstrates that selenium, added to the diet of rats in the form of seleniomethionine, prevents the appearance of early signs of ethanol-mediated liver injury under the conditions of the Lieber-DeCarli experimental design.

Adherence of Streptococcus mutans to orthodontic band cements.

BACKGROUND: The aim of this study was to quantitatively determine the adherence of Streptococcus mutans to orthodontic band cements. METHODS: Two hundred and ten blocks of seven different band cements for orthodontic prescription were made using a Teflon mould (4 × 4 × 1 mm). The obtained blocks were slightly polished and cleansed ultrasonically. Certified S. mutans ATCC 25175 were cultured with conventional methods for growth in Petri dishes and trypticase soy broth. Quantitative analysis was carried out with radioactive markers to codify the bacteria ((3) H). Subsequently, a combustion system was used to capture the residues, the radioactivity of the samples was measured, and the values recorded in disintegrations per minute (dpm). One-way analysis of variance (ANOVA) with a Scheffé test for multiple comparisons was realized with a significance level of ≤0.05. RESULTS: Significant differences were found among different band cement materials (p < 0.001). Two band cement materials showed statistically lower values than the others (Transbond Plus Band Cem and Ketac Cem). In contrast, GC Fuji Ortho Band presented the highest adherence of S. mutans. CONCLUSIONS: Among the cements evaluated, Transbond Plus Band Cem and Ketac Cem showed lower adherence of S. mutans.

TH-1 and TH-2 cytokines in stable chronic alcoholics.

UNLABELLED: In alcoholics, the activation of Kupffer cells by gram negative bacteriae leads to an inflammatory response and cytokine secretion, which in turn activate T-lymphocytes. Possibly, Th-1 lymphocytes are activated first, followed by a Th-2 response. Th-2 cytokines, especially interleukin (IL)-13 (scarcely studied in alcoholics), may be involved in the progression to chronic stages. AIMS: The aim of the study was to analyze the relationship of Th-1 and Th-2 cytokines with liver function, alcohol consumption, nutritional status and survival. METHODS: Serum Th-1 [interferon-γ (IFN-γ)] and Th-2 cytokines (IL-4, IL-13), IL-10, IL-6 and tumor necrosis factor (TNF-α), were determined for 18 controls and 47 stable alcoholics with variable liver function impairment, who were followed-up during a median time of 90 months, a period during which 14 patients died. RESULTS: IL-4 was lower among patients; no differences were observed regarding IL-6, but the remaining ILs were higher among alcoholics. IL-10 and IL-13 were even higher in cirrhotics (Z = 2.88, P = 0.004, and Z = 2.09, P = 0.037, respectively). A significant, direct, correlation was observed between IL-13 and IL-10 (ρ = 0.49, P = 0.001), and non-significant, inverse ones were observed between IFN-γ and IL-13 (ρ = -0.23), IL-4 (ρ = -0.14) and IL-10 (ρ = -0.09). IL-13 and IL-10 were inversely related with liver function and, directly with immunoglobulin A levels, but not with survival. CONCLUSION: Serum IFN-γ values were increased in alcoholics, who also showed raised IL-13 and IL-10, but lower IL-4 levels. Given the immunomodulatory roles of IL-10 and IL-13, this increase may be interpreted as a compensatory rise of anti-inflammatory cytokines. We failed to find any relation with mortality.

Diseño de un mapa de competencias para el grado de Licenciado en Farmacia / Designing a competency map for the degree of Pharmacy

El perfil propio de cada centro tanto desde el punto de vista académico, como profesional, vienemarcado por la claridad de las competencias genéricas y especificas que han de alcanzar sus titulados.La dificultad de la gestión transversal del mapa de competencias de una titulación reside, entre otras,en la necesidad de que cada competencia se ha de servir desde una o más asignaturas y cada asignaturaha de servir a una o más competencias. El objetivo del presente trabajo consiste en sintetizar elproceso de definición e implementación de las competencias de la titulación del Grado en Farmacia,teniendo en cuenta que éstas se han de adecuar, permanentemente, a las demandas sociales, a losrequisitos de calidad de la formación universitaria y a la mejora continua de sus procesos en el marcodel Espacio Europeo de Educación Superior (EEES) y de la legislación vigente. Se especifican lascapacidades, habilidades, valores y actitudes personales, a nivel de organización y técnicas a corto,medio y largo plazo, que facultan a los titulados para llevar a cabo las funciones propias de susestudios y que los capacita para el pleno desarrollo de su ejercicio profesional(AU)

Assessing the efficiency of urban waste biocomposting by analytical pyrolysis (Py-GC/MS).

Analytical pyrolysis (Py-GC/MS) was used to study complex composting processes. The technique was first validated for reproducibility and finally applied to assess the efficiency of a microbial bio-accelerator product (CBB) in composting organic residues with different composition. Fresh lignocellulosic and urban wastes were treated with CBB and the composting kinetics studied to investigate the transformations undergone in the course of biocomposting. Our findings demonstrate that these changes, as well as the efficiency of CBB, can be monitored through the molecular characterization of the released pyrolysis products. The CBB bacterial product effectively seems to favour composting accelerating the process and shorten composting time. Analytical pyrolysis was informative in assessing to which extent compost transformation reached an acceptable stabilization point. The technique could be also developed into a semi-quantitative tool to monitor changes of main organic matter components (polysaccharides, proteins, lignin, lipids, etc.) as composting proceeds.

Flares from a candidate Galactic magnetar suggest a missing link to dim isolated neutron stars.

Magnetars are young neutron stars with very strong magnetic fields of the order of 10(14)-10(15) G. They are detected in our Galaxy either as soft gamma-ray repeaters or anomalous X-ray pulsars. Soft gamma-ray repeaters are a rare type of gamma-ray transient sources that are occasionally detected as bursters in the high-energy sky. No optical counterpart to the gamma-ray flares or the quiescent source has yet been identified. Here we report multi-wavelength observations of a puzzling source, SWIFT J195509+261406. We detected more than 40 flaring episodes in the optical band over a time span of three days, and a faint infrared flare 11 days later, after which the source returned to quiescence. Our radio observations confirm a Galactic nature and establish a lower distance limit of approximately 3.7 kpc. We suggest that SWIFT J195509+261406 could be an isolated magnetar whose bursting activity has been detected at optical wavelengths, and for which the long-term X-ray emission is short-lived. In this case, a new manifestation of magnetar activity has been recorded and we can consider SWIFT J195509+261406 to be a link between the 'persistent' soft gamma-ray repeaters/anomalous X-ray pulsars and dim isolated neutron stars.