ABSTRACT
Microalgae are a source of a wide variety of commodities, including particularly valuable pigments. The typical pigments present in microalgae are the chlorophylls, carotenoids, and phycobiliproteins. However, other types of pigments, of the family of water-soluble polyphenols, usually encountered in terrestrial plants, have been recently reported in microalgae. Among such microalgal polyphenols, many flavonoids have a yellowish hue, and are used as natural textile dyes. Besides being used as natural colorants, for example in the food or cosmetic industry, microalgal pigments also possess many bioactive properties, making them functional as nutraceutical or pharmaceutical agents. Each type of pigment, with its own chemical structure, fulfills particular biological functions. Considering both eukaryotes and prokaryotes, some species within the four most promising microalgae groups (Cyanobacteria, Rhodophyta, Chlorophyta and Heterokontophyta) are distinguished by their high contents of specific added-value pigments. To further enhance microalgae pigment contents during autotrophic cultivation, a review is made of the main related strategies adopted during the last decade, including light adjustments (quantity and quality, and the duration of the photoperiod cycle), and regard to mineral medium characteristics (salinity, nutrients concentrations, presence of inductive chemicals). In contrast to what is usually observed for growth-related pigments, accumulation of non-photosynthetic pigments (polyphenols and secondary carotenoids) requires particularly stressful conditions. Finally, pigment enrichment is also made possible with two new cutting-edge technologies, via the application of metallic nanoparticles or magnetic fields.
Subject(s)
Microalgae , Pigments, Biological , Microalgae/metabolism , Microalgae/chemistry , Pigments, Biological/chemistry , Carotenoids/chemistry , Carotenoids/metabolism , Carotenoids/analysis , Phycobiliproteins/chemistry , Phycobiliproteins/metabolism , Cyanobacteria/metabolism , Cyanobacteria/chemistry , Rhodophyta/chemistry , Rhodophyta/metabolism , Chlorophyta/chemistry , Chlorophyta/metabolism , Chlorophyll/analysis , Polyphenols/analysis , Polyphenols/chemistry , Polyphenols/metabolism , Culture Media/chemistryABSTRACT
The initiation of the program Mental Health Support Program for Coronavirus Infection addressed the increased demand for mental health services in the province of Salamanca, resulting from the COVID-19 pandemic. The psychiatry service provided care for COVID-19 patients, their families, and healthcare workers who treated them, as these groups were identified as being at risk. This study aims to describe the assistance provided, including personnel and resources utilized, types of interventions carried out, and to assess the demand for mental health care and predominant symptoms and emotions experienced by patients. Billboards and the complex's intranet publicized the program. Specific clinical approach using telemedicine were provide from March 2020 to December 2021 to COVID-19 patients, their relatives, and healthcare workers. 216 patients were included with a mean age of 53.2 years, with women comprising 77.3% of this group. All the groups received treatment in similar proportions. Over a period of 730 h, a total of 1376 interventions were performed, with an average duration of 31.8 min per intervention. The program could treat 79.6% of these patients without requiring referrals to other services. When the program concluded, only 21 participants (9.7%) were discharged to the local mental health network to continue their mental health treatment. The program effectively reduced the burden on regular mental health services due to its ability to treat most patients without requiring referrals. The program was able to attend to most mental health requests with minimal involvement of the regular mental health service.
Subject(s)
COVID-19 , Mental Health Services , Telemedicine , Humans , COVID-19/epidemiology , COVID-19/psychology , Female , Male , Middle Aged , Mental Health Services/organization & administration , Adult , Mental Health , Pandemics , Follow-Up Studies , SARS-CoV-2 , Aged , Mental Disorders/therapy , Mental Disorders/epidemiologyABSTRACT
In recent years, a number of technologies have emerged to purify biogas into biomethane. This purification entails a reduction in the concentration of polluting gases such as carbon dioxide and hydrogen sulfide to increase the content of methane. In this study, we used a microalgal cultivation technology to treat and purify biogas produced from organic waste from the swine industry to obtain ready-to-use biomethane. For cultivation and purification, two 22.2 m3 open-pond photobioreactors coupled with an absorption-desorption column system were set up in San Juan de los Lagos, Mexico. Several recirculation liquid/biogas ratios (L/G) were tested to obtain the highest removal efficiencies; other parameters, such as pH, dissolved oxygen (DO), temperature, and biomass growth, were measured. The most efficient L/Gs were 1.6 and 2.5, resulting in a treated biogas effluent with a composition of 6.8%vol and 6.6%vol in CO2, respectively, and removal efficiencies for H2S up to 98.9%, as well as maintaining O2 contamination values of less than 2%vol. We found that pH greatly determines CO2 removal, more so than L/G, during cultivation because of its participation in the photosynthetic process of microalgae and its ability to vary pH when solubilized due to its acidic nature. DO, and temperature oscillated as expected from the light-dark natural cycles of photosynthesis and the time of day, respectively. Biomass growth varied with CO2 and nutrient feeding as well as reactor harvesting; however, the trend remained primed for growth.
Subject(s)
Biofuels , Microalgae , Animals , Swine , Ponds , Carbon Dioxide/analysis , Bacteria , BiomassABSTRACT
INTRODUCTION: It is necessary to analyze the aging process in institutionalized older people. For this purpose, a descriptive and analytical epidemiological study was carried out in nursing homes for older adults before the COVID-19 pandemic. OBJECTIVE: Provide an in-depth insight into cognitive (MEC), emotional (Geriatric Depression Scale), and functional (Barthel Scale) status within the older adult participants. METHOD: A sample of 973 participants analyzed the relationship between cognitive status, vulnerability to depression, and autonomous performance in Daily Day Activities (DDA) to predict the impact of the comorbidity of these variables. Therefore, in addition to the general distribution of the sample in the previously mentioned dimensions, differences were analyzed according to gender, age, educational level, and geographic area. RESULTS: The results confirm the hypothesis that a more impaired cognitive state is associated with higher levels of depression and lower functional capacity. The MEC scores have positive and highly significant correlations with Barthel and Yesavage. The relationship between dementia and autonomy is observed for both sexes, while the relationship between dementia and depression is only observed in women. The educational level influences the MEC scores (the more education, the better performance) and the Barthel scores (the less education, the greater dependency). Statistically significant differences were also found depending on the area of residence location. CONCLUSIONS: The more deteriorated cognitive state will be associated with a higher level of depression and lower functional capacity in daily life activities.
Subject(s)
Depression , Nursing Homes , Humans , Female , Male , Aged , Aged, 80 and over , Depression/epidemiology , Institutionalization , Activities of Daily Living , Homes for the Aged , Cognition , Geriatric Assessment , Dependency, PsychologicalABSTRACT
The PHQ-9 questionnaire is a screening test worldwide used to measure depression. But it cannot be used in Costa Rica, due to the fact that it has not previously been validated for its population. The present study aims to show the validation of the PHQ-9 questionnaire and its variants (PHQ-2, PHQ-4, PHQ-8) in a population sample of adults residing in Costa Rica. A sample was collected (n = 1162) using a self-administered questionnaire. Confirmatory Factor Analysis (CFA), Receiver Operating Characteristic (ROC) curve, and Multiple Group Confirmatory Factor Analysis (MGCFA) were tested. One factor was found that explained 73.33% of the variance with excellent internal consistency (α = 0.928). Goodness-of-fit measures were adequate (RMSEA = 0.107; CFI = 0.948), as was diagnostic power at a cut-off of 10 (78.60 for Sensitivity and 27.95 for 1-Specificity). External validation indices were good (r = 0.843 with GAD-7, r = - 0.647 with RS14, and r = 0.301 with FCV19S), and the model showed invariance by sex (∆χ2 = 27.90; df = 27; p < 0.001). Additionally, new cut-off points were proposed for PHQ-9 and its variants for Costa Rican male, female, and general populations. The PHQ-9 and its variants (PHQ-2, 4, and 8) are valid tools for detecting depression (and anxiety for PHQ-4) in Costa Rican population. In addition, new cut-off points differentiated by sex are proposed.
Subject(s)
Anxiety , Patient Health Questionnaire , Humans , Female , Male , Costa Rica , Anxiety Disorders , Factor Analysis, StatisticalABSTRACT
Suitability of microalgae valorization mainly depends on its biochemical composition. Overall, among all microalgal derivatives, pigments currently stand out as the major added-value component. While it is well recognized that microalgal growth conditions strongly affect biomass composition, final tuning of already grown microalgae has been scarcely studied. Herein, pigment crude extract and debris biomass composition of an already grown microalgal consortium was evaluated after a short-term exposure (90 min) to different levels of irradiance (15, 50, 120 µmol m-2 s-1) and sulfide concentrations (0, 3.2, 16 mg L-1). Although lipid, protein, and carbohydrate contents of debris biomass were not decisively modified by the short-term exposures, pigments content of the crude extracts were strongly modified after 90-min exposure at given sulfide and irradiance conditions. Particularly, a higher content of chlorophyll a, chlorophyll b, and total carotenoids was estimated at an optimal sulfide concentration of 5 mg L-1, and the higher irradiance of 120 µmol m-2 s-1. Contrarily, the average irradiation level of 50 µmol m-2 s-1 and the absence of sulfide stimulated the production of phycoerythrin and phycocyanin which could be increased by 65 and 50%, respectively. Thus, a final qualitative and quantitative tuning of pigment content is plainly achievable on grown microalgal biomass, in a reduced exposure time, at given irradiance or sulfide conditions.
Subject(s)
Microalgae , Chlorophyll A/metabolism , Microalgae/metabolism , Phycoerythrin , Phycocyanin , Carotenoids/metabolism , BiomassABSTRACT
Since the beginning of the COVID-19 pandemic, the need to implement protocols that respond to the mental health demands of the population has been demonstrated. The PASMICOR programme started in March 2020, involving a total of 210 requests for treatment. Out of those subjects, the intervention was performed in 53 patients with COVID-19 without history of past psychiatric illness, 57 relatives and 60 health professionals, all of them within the area of Salamanca (Spain). Interventions were carried out by professionals of the public mental health service mostly by telephone. Depending on clinical severity, patients received basic (level I) or complex psychotherapeutic care combined with psychiatric care (level II). The majority of attended subjects were women (76.5%). Anxious-depressive symptoms were predominant, although sadness was more frequent in patients, insomnia in relatives and anxiety and fear in health professionals. 80% of the sample, particularly most of the health professionals, required a high-intensity intervention (level II). Nearly 50% of the people treated were discharged after an average of 5 interventions. Providing early care to COVID-19 patients, relatives and professionals by using community mental health resources can help to reduce the negative impact of crises, such as the pandemic, on the most affected population groups.
Subject(s)
COVID-19 , Humans , Female , Male , COVID-19/epidemiology , Pandemics , Follow-Up Studies , Mental Health , SARS-CoV-2ABSTRACT
The SARS-CoV-2 health emergency has led to a restructuring of health care systems and the reassignment of medical specialists from their usual duties to attend COVID-19 patients. The aim of this paper is to describe the levels of insomnia, anxiety, depression, and the impact on quality of life of doctors who were on the frontline of COVID-19 during the first two waves of the pandemic. Self-report surveys were conducted on said physicians during both waves, with 83 and 61 responses in the first and second waves, respectively. The reported presence of insomnia was frequent (71.8%), although it decreased in the second survey. Anxiety was moderate, decreasing from 57.1% to 43.1% between measurements. Overall, depression rates decreased between the two surveys. Substance use was found to have an indirect correlation with personal and professional satisfaction. In the light of the unforeseeable evolution of the pandemic and the medium- to long-term repercussions on professionals, we believe the adaptation of health resources is crucial to meet the new unpredictable mental health needs of this group.
Subject(s)
COVID-19 , Physicians , Anxiety/epidemiology , Anxiety/psychology , COVID-19/epidemiology , Depression/epidemiology , Depression/psychology , Humans , Personal Satisfaction , Quality of Life/psychology , SARS-CoV-2 , Sleep QualityABSTRACT
Lubricants are materials able to reduce friction and/or wear of any type of moving surfaces facilitating smooth operations, maintaining reliable machine functions, and reducing risks of failures while contributing to energy savings. At present, most worldwide used lubricants are derived from crude oil. However, production, usage and disposal of these lubricants have significant impact on environment and health. Hence, there is a growing pressure to reduce demand of this sort of lubricants, which has fostered development and use of green lubricants, as vegetable oil-based lubricants (biolubricants). Despite the ecological benefits of producing/using biolubricants, availability of the required raw materials and agricultural land to create a reliable chain supply is still far from being established. Recently, biomass from some microalgae species has attracted attention due to their capacity to produce high-value lipids/oils for potential lubricants production. Thus, this multidisciplinary work reviews the main chemical-physical characteristics of lubricants and the main attempts and progress on microalgae biomass production for developing oils with pertinent lubricating properties. In addition, potential microalgae strains and chemical modifications to their oils to produce lubricants for different industrial applications are identified. Finally, a guide for microalgae oil selection based on its chemical composition for specific lubricant applications is provided.
Subject(s)
Biomass , Lubricants , Microalgae , Biocompatible Materials/chemistry , Bioreactors , Biotechnology , Lubricants/chemistry , Lubricants/isolation & purification , Lubrication , Microalgae/chemistry , Microalgae/growth & development , PhotosynthesisABSTRACT
Microalgae-bacteria consortium based technology using a High Rate Algal Pond (HRAP) interconnected to an Absorption Bubble Column (ABC) has emerged as an environmentally friendly promising option to upgrade biogas. However, the oxygenic photosynthesis of microalgae induces oxygen contamination in upgraded biogas, which could limit its further applications. Several strategies were proposed to favor the oxygen desorption and oxygen uptake in parts and accessories of the upgrading system. The effect of the volumetric ratio liquid recirculation rate/biogas rate (L/G = 5.0, 1.0 y 0.5) was evaluated in conjunction with the application of a novel accessory called Open Trickling Column (OTC). The O2 content in upgraded biogas was around 2.1%v, attaining CO2 removal efficiencies around 90%, at L/G ratio of 1.0 during diurnal and nocturnal periods. The inclusion of an OTC at the previous L/G, enhanced 54% the removal of O2 by stripping and uptake compared with the basal condition. Mass balances of H2S and methane showed that L/G > 1.0 favored the complete oxidation of H2S but promoted the loss of methane in dissolved form. Additionally the effect of increasing linear velocity of liquid broth in the lab-scale HRAP (from 15 cm s-1 to 20 cm s-1) showed to improve the O2 stripping with a consequential increase of biomass concentration under steady-state (from 0.7 to 1.4 g L-1) besides achieving O2 content in the upgraded biogas around 1.5%v.
Subject(s)
Microalgae , Biofuels , Biomass , Carbon Dioxide/analysis , Methane , Oxygen , Photobioreactors , TechnologyABSTRACT
BACKGROUND: Iron nanoparticles, mainly in magnetite phase (Fe3O4 NPs), are released to the environment in areas with high traffic density and braking frequency. Fe3O4 NPs were found in postmortem human brains and are assumed to get directly into the brain through the olfactory nerve. However, these pollution-derived NPs may also translocate from the lungs to the bloodstream and then, through the blood-brain barrier (BBB), into the brain inducing oxidative and inflammatory responses that contribute to neurodegeneration. OBJECTIVE: To describe the interaction and toxicity of pollution-derived Fe3O4 NPs on primary rat brain microvascular endothelial cells (rBMECs), main constituents of in vitro BBB models. METHODS: Synthetic bare Fe3O4 NPs that mimic the environmental ones (miFe3O4) were synthesized by co-precipitation and characterized using complementary techniques. The rBMECs were cultured in Transwell® plates. The NPs-cell interaction was evaluated through transmission electron microscopy and standard colorimetric in vitro assays. RESULTS: The miFe3O4 NPs, with a mean diameter of 8.45±0.14 nm, presented both magnetite and maghemite phases, and showed super-paramagnetic properties. Results suggest that miFe3O4 NPs are internalized by rBMECs through endocytosis and that they are able to cross the cells monolayer. The lowest miFe3O4 NPs concentration tested induced mid cytotoxicity in terms of 1) membrane integrity (LDH release) and 2) metabolic activity (MTS transformation). CONCLUSION: Pollution-derived Fe3O4 NPs may interact and cross the microvascular endothelial cells forming the BBB and cause biological damage.
Subject(s)
Blood-Brain Barrier/drug effects , Brain Injuries/chemically induced , Endothelial Cells/drug effects , Magnetic Iron Oxide Nanoparticles , Nanoparticles/toxicity , Biological Transport/drug effects , Blood-Brain Barrier/injuries , Blood-Brain Barrier/pathology , Brain/drug effects , Brain/metabolism , Cells, Cultured , Endocytosis/drug effects , Endothelial Cells/metabolism , Endothelial Cells/pathology , HumansABSTRACT
The rates of oxygenic and carbon fixation photosynthetic processes of a microalgae consortium were simultaneously evaluated under steady-state performance in an bench scale alkaline open-system exposed to outdoor conditions in Mexico City. A synthetic methane-free gaseous stream (SMGS) similar to biogas was used as inorganic carbon source and model of biogas upgrading. The microalgae CO2 fixation rates were calculated through a novel methodology based on an inorganic carbon mass balance under continuous scrubbing of a SMGS similar to biogas, where the influence of pH and temperature time-depended oscillations were successfully incorporated into the mass balances. The oxygenic activity and carbon fixation occurred at different non-stoichiometric rates during the diurnal phase, in average carbon fixation predominated over oxygen production (photosynthesis quotient PQ≈ 0.5â¯mol O2 mol-1 CO2) indicating photorespiration occurrence mainly under dissolved oxygen concentrations higher than 10â¯mgâ¯L-1. The oxygen and inorganic carbon mass balances demonstrated that photorespiration and endogenous respiration were responsible for losing up to 66% and 7% respectively of the biomass grew at diurnal periods under optimal conditions. In favoring photorespiration conditions, the microalgae biomass productivity (CO2 effectively captured) can be severely decreased. A kinetic mathematical model as a function of temperature and irradiance of the oxygenic photosynthetic activity indicated the optimal operation zone for this outdoor alkaline open-photobioreactor, where irradiance was found being the most influential parameter.
Subject(s)
Biofuels , Photobioreactors , Biochemical Phenomena , Biomass , Carbon Dioxide , Hydrogen-Ion Concentration , Kinetics , Microalgae , Oxygen , Photosynthesis , TemperatureABSTRACT
The removal of toxic hydrogen sulfide (H2S) from the air at pilot-scale with elemental sulfur recovery was evaluated using Fe-EDTA chelate as a single treatment at a pH of about 8.5. This was later combined with a compost biofiltration process for polishing the pre-treated air. Experiments were performed in a unique container system that allowed deploying either Fe-EDTA chelate or Fe-EDTA chelate/biofiltration treatment (hybrid system). The results showed the feasibility of H2S removal at concentrations between 200 and 5300 ppmv (H2S loading rates of 7-190â¯gâ¯m-3 h-1) present in fouled air. The Fe-EDTA chelate as a single treatment was able to remove nearly 99.99% of the H2S at inlet concentrations ≤ 2400 ppmv (107â¯gâ¯m-3 h-1), while the hybrid system archived undetectable outlet H2S concentrations (<1 ppmv) at inlet levels of 4000 and 5300 ppmv. At 5300 ppmv, the Fe-EDTA chelate process H2S removal efficiency decreased to 99.20% due to the limitation of oxygen mass transfer in the Fe(III) regeneration reaction. Under the previous conditions, the pH was required to be controlled by the addition of NaOH, due to the likely occurrence of undesirable parallel reactions. The elemental sulfur yield attained in the physicochemical module was 75-93% with around 80% recovered efficiently as a solid.
Subject(s)
Environmental Restoration and Remediation/methods , Ferric Compounds/pharmacology , Hydrogen Sulfide/isolation & purification , Sulfur/isolation & purification , Air Pollutants/isolation & purification , Edetic Acid/pharmacology , Iron Chelating Agents/pharmacology , Oxygen , Pilot ProjectsABSTRACT
Microalgal-bacterial processes have emerged as environmental friendly systems for the cost-effective treatment of anaerobic effluents such as biogas and nutrients-laden digestates. Environmental parameters such as temperature, irradiation, nutrient concentration and pH effect the performance of the systems. In this paper, the potential of a microalgal-bacterial photobioreactor operated under high pH (≈9.5) and high alkalinity to convert biogas into biomethane was evaluated. The influence of the illumination regime (continuous light supply vs 12h/12h light/dark cycles) on the synthetic biogas upgrading efficiency, biomass productivity and nutrient removal efficiency was assessed in a High-Rate Algal Pond interconnected to a biogas absorption bubble column. No significant differences in the removal efficiency of CO2 and H2S (91.5±2% and 99.5%±0.5, respectively) were recorded regardless of the illumination regime. The high fluctuations of the dissolved oxygen concentration during operation under light/dark cycles allowed to evaluate the specific growth rate and the specific partial degradation rate of the microalgae biomass by photosynthesis and respiration, respectively. The respiration reduced the net microalgae biomass productivity under light/dark cycles compared with process operation under the continuous light supply.
Subject(s)
Biofuels , Lighting , Microalgae/physiology , Photosynthesis , Biomass , PondsABSTRACT
The H2S may play a key role in the sulfur cycle among the biogas production by the anaerobic digestion of wastes and the biogas upgrading by a microalgae based technology. The biogas is upgraded by contacting with slightly alkaline aqueous microalgae culture, then CO2 and H2S are absorbed. The dissolved H2S could limit or inhibit the microalgae growth. This paper evaluated the role of dissolved H2S and other sulfured byproducts under prevailing biogas upgrading conditions using a microalgal technology. At initial stages of batch cultivation the growth of Chlorella sp. was presumably inhibited by dissolved H2S. After 2 days, the sulfides were oxidized mainly by oxic chemical reactions to sulfate, which was later rapidly assimilated by Chlorella sp., allowing high growing rates. The fate of H2S during the microalgae cultivation at pH > 8.5 was assessed by a mathematical model where the pentasulfide, thiosulfate and sulfite were firstly produced and converted finally to sulfate for posterior assimilation.
Subject(s)
Biofuels , Chlorella , Carbon Dioxide , Microalgae , SulfurABSTRACT
The effect of the inoculation of a microalgae-bacteria system on the removal of nutrients and organic matter using municipal, piggery and digestate wastewaters was evaluated. Three conditions for each substrate were evaluated: (1) inoculation with activated sludge and illumination, (2) inoculation with activated sludge without illumination, and (3) inoculation with activated sludge plus a native microalgae consortium under illumination. The illuminated reactors that were inoculated only with activated sludge developed microalgae after 12 operation days. In these reactors, the formation of flocs was observed affecting the sedimentation of the biomass positively. The removal of chemical oxygen demand, ammonium and phosphorous reached 84%, 65% and 77%, respectively.
Subject(s)
Bacteria/metabolism , Microalgae/metabolism , Sewage/analysis , Waste Disposal, Fluid/methods , Wastewater/analysis , Ammonium Compounds/analysis , Animals , Biological Oxygen Demand Analysis , Phosphorus/analysis , Swine , Waste Disposal, Fluid/instrumentationABSTRACT
The potential of a pilot high rate algal pond (HRAP) interconnected via liquid recirculation with an external absorption column for the simultaneous removal of H2S and CO2 from biogas using an alkaliphilic microalgal-bacterial consortium was evaluated. A bubble column was preferred as external absorption unit to a packed bed column based on its ease of operation, despite showing a comparable CO2 mass transfer capacity. When the combined HRAP-bubble column system was operated under continuous mode with mineral salt medium at a biogas residence time of 30 min in the absorption column, the system removed 100% of the H2S (up to 5000 ppmv) and 90% of the CO2 supplied, with O2 concentrations in the upgraded biogas below 0.2%. The use of diluted centrates as a free nutrient source resulted in a gradual decrease in CO2 removal to steady values of 40%, while H2S removal remained at 100%. The anaerobic digestion of the algal-bacterial biomass produced during biogas upgrading resulted in a CH4 yield of 0.21-0.27 L/gVS, which could satisfy up to 60% of the overall energy demand for biogas upgrading. This proof of concept study confirmed that algal-bacterial photobioreactors can support an integral upgrading without biogas contamination, with a net negative CO2 footprint, energy production, and a reduction of the eutrophication potential of the residual anaerobic effluents.
Subject(s)
Biofuels/analysis , Biotechnology , Carbon Dioxide/isolation & purification , Hydrogen Sulfide/isolation & purification , Microalgae/chemistry , Absorption, Physicochemical , Anaerobiosis , Biofuels/standards , Biomass , Biotechnology/instrumentation , Biotechnology/methods , Microalgae/growth & development , Photobioreactors , Ponds/microbiology , Spirulina/chemistry , Spirulina/growth & developmentABSTRACT
A kinetic model for the elemental sulfur and sulfate production from the autotrophic sulfide oxidation has been proposed. It is based on two kinetic equations able to describe the simultaneous microbial consumption of oxygen and sulfide (OUR and SUR) as a function of a particular sulfide-oxidizing microorganism or its physiological state, these can be characterized by the assessment of their kinetic constants. The respirometric technique allowed to estimate the dynamic experimental OUR and SUR profiles, which were used to calibrate the kinetic model. The ratio OUR/SUR was proposed to predict the sulfide oxidation extent and then the fate of sulfide to elemental sulfur and sulfate.
Subject(s)
Models, Chemical , Sulfates/metabolism , Sulfides/metabolism , Sulfur/metabolism , Kinetics , Oxidation-Reduction , Sulfides/chemistryABSTRACT
Hydrogen sulfide (H2S) is a very common odor nuisance which is best controlled by chemical or biological scrubbing. Under alkaline pH, the amount of H2S that can be solubilized in a scrubbing liquid increases significantly, and therefore, gas-liquid mass transfer limitations can be reduced. To date, biological scrubbing of H2S has been limited to neutral or acidic pH, despite the potential benefit of reduced mass transfer limitations at alkaline pH. In the present paper, an alkaliphilic sulfoxidizing bacterial consortium was deployed in a laboratory-scale biotrickling filter treating H2S at pH 10. The gas contact time ranged from 1 to 6 s, and H2S inlet concentrations, from 2.5 to 18 ppm(v). The results showed that under most conditions, H2S removal exceeded 98% and the degradation end-product was sulfate. At the highest H2S concentrations and shortest gas contacttimes, when the loading exceeded 30 g m(-3) h(-1), the H2S removal efficiency decreased significantly due to biological reaction limitation, and incompletely oxidized sulfides were measured in the trickling liquid. An analysis of the process demonstrated that operating the biotrickling filter at high pH results in an enhancement of the mass transfer by a factor of 1700-11 000. Overall, alkaline biotrickling filtration was shown to be very effective at low concentration of H2S and very short gas contact time. This is the first demonstration of a biotrickling filter for air pollution control operated at high pH.