The Confounding Ultrasound Diagnosis of Ectopic Pregnancy: Lessons From Peer Learning.

ABSTRACT: As the treatment of ectopic pregnancy (EP) has shifted increasingly to medical therapies, the ultrasound (US) diagnosis of EP must necessarily favor specificity over sensitivity. Our review of peer learning cases of EP and early intrauterine pregnancies found several types of pitfalls and problems, which will be described in this essay. These issues include the following: differentiation of tubal EP from a corpus luteum by echogenicity relative to ovarian parenchyma, push technique, and claw sign; how to distinguish interstitial EP from eccentrically located intrauterine pregnancies (angular); use of trophoblastic flow in abnormal intrauterine locations to help identify cesarean scar or cervical implantations; recognition that hemoperitoneum without visualized EP may be due to EP or hemorrhagic cyst; and that distinguishing an abortion in progress from a pregnancy of unknown location may not always be possible and requires clinical follow-up. This essay will also illustrate the consensus terminology that our radiology department has developed in conjunction with our obstetrics and gynecology colleagues to communicate clear diagnoses and reduce the risk of misdiagnosis and adverse outcomes.

3D Printing of Carotid Artery and Aortic Arch Anatomy: Implications for Preprocedural Planning and Carotid Stenting.

BACKGROUND: Carotid artery stenting (CAS) has been associated with increased periprocedural stroke in comparison with carotid endarterectomy (CEA). Three-dimensional (3D) printing of aortic arch and carotid artery may aid with preprocedural planning and adaptive learning, possibly reducing procedure-related complications. METHODS: Five CAS cases with available computed tomography angiography (CTA) were retrospectively evaluated and 3D-printed models (3D-PMs) were made. One additional case that was 3D printed preprocedurally provided prospective analysis. Standard 3D printing software was used to create a computer-aided image from CTA series that were 3D printed. The models were painted with acrylic paint to highlight anatomical features. The type of aortic arch, common carotid artery (CCA) to internal carotid artery (ICA) angle, and ICA distal landing zone for embolic protection device (EPD) were analyzed. In addition, stent and EPD sizing was determined preprocedurally for the prospective case. Comparisons of 3D-PM were made with 3D-CTA reconstruction and carotid angiography. RESULTS: Of 6 cases, 2 had type III and 4 had type I aortic arches. One case, a failed endovascular approach from femoral artery access site requiring reattempt via right brachial artery, had a CCA to ICA angle >60° and a tortuous innominate artery and distal ICA for EPD. The remaining 5 cases had straight distal landing zones for EPD and <60° CCA to ICA angles with successful first endovascular attempt. Additionally, vessel-specific stent and EPD sizing was appropriately chosen for the 1 prospective case. CONCLUSIONS: 3D-PM for CAS offers added value compared with CTA by providing improved perceptual and visual understanding of 3D anatomy.

Patient-Specific Coronary Artery Bypass Graft 3D Printing: Implications for Procedural Planning in Complex Percutaneous Coronary Interventions.

BACKGROUND: Three-dimensional (3D) printing technology has seen tremendous growth in augmenting didactics, research, and preprocedural planning with structural heart procedures. Limited investigative efforts have been made in other areas of the cardiovascular spectrum. 3D-printed models (PMs) of anatomically complex coronary artery bypass graft (CABG) patients from coronary computed tomography angiography (CCTA) have implications for adaptive learning and preprocedural planning. METHODS: Five patients with CCTA who underwent subsequent coronary angiography were 3D printed for retrospective comparisons. Standard slicer software was used to create a computer-aided image of the ascending aorta, native coronary arteries, bypass grafts, aortic arch, and great vessels and 3D printed using polylactic acid filament. The models were painted with acrylic paint to highlight anatomical features and comparison was made with coronary angiography and 3D-CTA images. RESULTS: All occluded vein grafts, left and right internal mammary artery (IMA) grafts, patent saphenous vein grafts, along with distal graft anastomotic sites, were accurately 3D printed. In cases with chronic total occlusions (CTOs), ambiguous ostial caps, mid or distal vessel chronic occlusions, and occlusions seen as CTOs on coronary angiography were 3D printed showing either distal vessel reconstitution via collaterals or complete arterial filling seen in a setting of calcification, microchannels, and collateral flow. Lastly, 3D printing of the aortic root and great vessels allowed for better appreciation of vessel tortuosity to aid in the cannulation of IMA grafts and optimizing engagement with diagnostic and guiding catheters. CONCLUSIONS: 3D printing of anatomically complex CABG patients has the potential to assist with preprocedural planning and operator understanding of complex coronary anatomy.

Aortic stenosis calcium scoring in a racially mixed sample.

Aortic stenosis (AS) is common and increasing in prevalence as the population ages. Using computed tomography (CT) to quantify aortic valve calcification (AVC) it has been reported that men have greater degrees of calcification than women among subjects with severe AS. These data, however, were derived in largely Caucasian populations and have not been verified in non-Caucasian subjects. This retrospective study identified 137 patients with severe AS who underwent valve replacement and had CT scans within 6 months prior to surgery. AVC scores were compared between men and women, both in the entire sample and in racial subgroups. 52% of subjects were male and 62.8% were non-Caucasian. Mean AVC score for the entire cohort was 3062.08±2097.87 with a range of 428-13,089. Gender differences in aortic valve calcification were found to be statistically significant with an average AVC score of 3646±2422 in men and 2433±1453 in women (p=0.001). On multivariate analysis, gender remained significantly associated with AVC score both in the entire sample (p=0.014) and in the non-Caucasian subgroup (p=0.008). Mean AVA was significantly greater in males than females but this difference disappeared when AVA was indexed to BSA (p=0.719). AVA was not different between racial groups (p=0.369). In this research we observed that among subjects with severe AS men have higher AVC scores than women regardless of racial background. This is consistent with previous studies in predominantly Caucasian populations.

Aortic root and valve proportions: an example of the golden ratio?

Calcific aortic stenosis is the most common lesion requiring valve replacement. Transcutaneous procedures (TAVR) are rapidly increasing yet detailed information on aortic valve and root anatomy are sparse.  This study examined gated cardiac CT scans to make observations regarding the size and proportions of the valve leaflets, sinuses of Valsalva, and sinotubular junction. One hundred and fifty gated cardiac CT scans were performed for a variety of clinical indications. Area of each cusp (short axis plane) was measured along with sinus height (from leaflet base to sinotubular junction), sinus width (from central coaptation point to outer sinus edge), annular perimeter, perimeter at mid-sinus level, and perimeter at the sinotubular junction. The right coronary cusp was largest, the left cusp smallest, and the non-coronary cusp intermediate in size. Each cusp was larger in men than women, even after indexing for body surface area.  By contrast, indexed sinus width and height did not differ between genders. No significant differences were noted between races. Annular perimeter did not vary by age while the mid-sinus perimeter and sinotubular junction perimeter increased with age (p=0.01, r2 =0.05 and p=0.002, r2 =0.07).  Interestingly, the ratio of sinus height (average): annular radius was 1.69±0.18, very close to the "golden ratio" of 1.62 found throughout the natural world.  This might be important for proper vortex formation in the sinuses.

Beyond Pulmonary Embolism; Nonthrombotic Pulmonary Embolism as Diagnostic Challenges.

Nonthrombotic pulmonary embolism (NTPE) is less well understood and is encountered less frequently than pulmonary embolism from venous thrombosis. NTPE results from embolization of nonthrombotic material to the pulmonary vasculature originating from many different cell types as well as nonbiologic or foreign materials. For many radiologists NTPE is a challenging diagnosis, presenting nonspecific or unusual imaging findings in the setting of few or unusual clinical signs. The aim of this paper is to review the pathophysiology of diverse causes of NTPE, which should aid radiologists to better understand and, more importantly, diagnose these infrequent events.

CT based 3D printing is superior to transesophageal echocardiography for pre-procedure planning in left atrial appendage device closure.

Accurate assessment of the left atrial appendage (LAA) is important for pre-procedure planning when utilizing device closure for stroke reduction. Sizing is traditionally done with transesophageal echocardiography (TEE) but this is not always precise. Three-dimensional (3D) printing of the LAA may be more accurate. 24 patients underwent Watchman device (WD) implantation (71 ± 11 years, 42% female). All had complete 2-dimensional TEE. Fourteen also had cardiac computed tomography (CCT) with 3D printing to produce a latex model of the LAA for pre-procedure planning. Device implantation was unsuccessful in 2 cases (one with and one without a 3D model). The model correlated perfectly with implanted device size (R2 = 1; p < 0.001), while TEE-predicted size showed inferior correlation (R2 = 0.34; 95% CI 0.23-0.98, p = 0.03). Fisher's exact test showed the model better predicted final WD size than TEE (100 vs. 60%, p = 0.02). Use of the model was associated with reduced procedure time (70 ± 20 vs. 107 ± 53 min, p = 0.03), anesthesia time (134 ± 31 vs. 182 ± 61 min, p = 0.03), and fluoroscopy time (11 ± 4 vs. 20 ± 13 min, p = 0.02). Absence of peri-device leak was also more likely when the model was used (92 vs. 56%, p = 0.04). There were trends towards reduced trans-septal puncture to catheter removal time (50 ± 20 vs. 73 ± 36 min, p = 0.07), number of device deployments (1.3 ± 0.5 vs. 2.0 ± 1.2, p = 0.08), and number of devices used (1.3 ± 0.5 vs. 1.9 ± 0.9, p = 0.07). Patient specific models of the LAA improve precision in closure device sizing. Use of the printed model allowed rapid and intuitive location of the best landing zone for the device.

Portal vein thrombus and infiltrative HCC: a pictoral review.

Infiltrative hepatocellular carcinoma (HCC) can be overlooked on imaging. Radiologists should have a high index of suspicion for this entity in patients with chronic liver disease. Careful evaluation of the portal vein may help the radiologist diagnose infiltrative HCC, due to the high association (68%-100%) of portal vein tumor thrombus with this condition. This article will review the imaging findings of infiltrative HCC, particularly its association with portal vein thrombus, and describe imaging pitfalls and mimickers.

Relation Between Epicardial Adipose and Aortic Valve and Mitral Annular Calcium Determined by Computed Tomography in Subjects Aged ≥65 Years.

Epicardial adipose tissue (EAT) has been linked to coronary artery calcium deposits and atherosclerotic disease. Mitral annular (MAC) and aortic valve calcium (AVC) have also been associated with atherosclerosis. This study examined the possible relation between EAT thickness and valvular calcium deposits. We included 294 patients aged ≥65 years who had noncontrast computed tomography scans of the chest. Mean age was 76 ± 7 years; 47% were men. Using reconstructed images, EAT thickness was measured at various locations. MAC and AVC were quantified by Agatston technique. The sum of AVC and MAC was reported as the grand total score (GTS). Subjects were divided into 2 groups based on the value of GTS; GTS = 0, no cardiac calcification and GTS ≥1, cardiac calcification group. Epicardial fat (left and right atrioventricular grooves and superior interventricular groove) was significantly greater in the cardiac calcification group compared with the no cardiac calcification (all values, p <0.05). After adjusting for clinical variables including BMI, EAT at the superior interventricular groove remained significantly associated with total calcium. Left atrioventricular groove EAT demonstrated a trend toward an association with total calcium, but this did not reach statistical significance. In conclusion, epicardial fat is associated with calcium deposits of the mitral annulus and aortic valve.

Effect of Mitral Annular Calcium on Left Ventricular Diastolic Parameters.

Assessment of left ventricular (LV) diastolic function by Doppler flow imaging and tissue Doppler is an integral part of the echocardiographic examination. Mitral annular calcium (MAC) is frequently encountered on echocardiography. The aim of this study was to assess the impact of MAC, quantitatively measured by computed tomography scan, on echocardiographic LV diastolic parameters. We included 155 patients aged ≥65 years. Computed tomography reconstructions of the mitral annulus were created, and calcium identified and quantified by Agatston technique. Calcium locations were assigned using an overlaid template depicting the annular segments in relation to surrounding anatomic structures. Echocardiographic assessment of diastolic function was performed in standard fashion. Mean age was 77 years; 49% were men; and 43% were black. Patients with MAC had lower septal e' (p = 0.003), lateral e' (p = 0.04), and average e' (p = 0.01) compared with those without MAC. They also had a higher E-wave velocity (p = 0.01) and E/e' ratio (p <0.001). When evaluated by severity of MAC, and after adjustment for multiple clinical factors, there was a graded (inverse) relation between MAC severity and septal e' (p = 0.01), lateral e' (p = 0.01), and average e' (p = 0.01). In conclusion, LV diastolic parameters, as measured by Doppler echocardiography, are altered in the presence of MAC. This could be due to direct effects of MAC on annular function or might reflect truly reduced diastolic function. Interpretation of diastolic parameters in patients with MAC should be performed with caution.

Distribution of Mitral Annular and Aortic Valve Calcium as Assessed by Unenhanced Multidetector Computed Tomography.

Aging is associated with calcium deposits in various cardiovascular structures, but patterns of calcium deposition, if any, are unknown. In search of such patterns, we performed quantitative assessment of mitral annular calcium (MAC) and aortic valve calcium (AVC) in a broad clinical sample. Templates were created from gated computed tomography (CT) scans depicting the aortic valve cusps and mitral annular segments in relation to surrounding structures. These were then applied to CT reconstructions from ungated, clinically indicated CT scans of 318 subjects, aged ≥65 years. Calcium location was assigned using the templates and quantified by the Agatston method. Mean age was 76 ± 7.3 years; 48% were men and 58% were white. Whites had higher prevalence (p = 0.03) and density of AVC than blacks (p = 0.02), and a trend toward increased MAC (p = 0.06). Prevalence of AVC was similar between men and women, but AVC scores were higher in men (p = 0.008); this difference was entirely accounted for by whites. Within the aortic valve, the left cusp was more frequently calcified than the others. MAC was most common in the posterior mitral annulus, especially its middle (P2) segment. For the anterior mitral annulus, the medial (A3) segment calcified most often. In conclusion, AVC is more common in whites than blacks, and more intense in men, but only in whites. Furthermore, calcium deposits in the mitral annulus and aortic valve favor certain locations.

MRI features of cellular angiomyofibroma with pathologic correlation.

Within the spectrum of extratesticular mesenchymal tumors in the scrotum and perineum lies cellular angiofibroma, also known as angiomyofibroblastoma-like tumor, a rare lesion originally described to almost exclusively occur in the vulva, perineum, and pelvis of women. We report a case of this tumor, with an adjacent scrotal lipoma, occurring in a 60-year-old male who presented to our department with a firm palpable scrotal mass. To our knowledge, the MRI findings of this entity have yet to be described in the radiological literature. We present the MRI features of cellular angiofibroma that are consistent with the pathological characteristics of this entity-a benign cellular and fibrous tumor with prominent vascularity.