ABSTRACT
The polarization state of light is a key parameter in many imaging systems. For example, it can image mechanical stress and other physical properties that are not seen with conventional imaging and can also play a central role in quantum sensing. However, polarization is more difficult to image, and polarimetry typically involves several independent measurements with moving parts in the measurement device. Metasurfaces with interleaved designs have demonstrated sensitivity to either linear or circular/elliptical polarization states. Here, we present an all-dielectric meta-polarimeter for direct measurement of any arbitrary polarization state from a single-unit-cell design. By engineering a completely asymmetric design, we obtained a metasurface that can excite eigenmodes of the nanoresonators, thus displaying a unique diffraction pattern for not only any linear polarization state but all elliptical polarization states (and handedness) as well. The unique diffraction patterns are quantified into Stokes parameters with a resolution of 5° and with a polarization state fidelity of up to 99 ± 1%. This holds promise for applications in polarization imaging and quantum state tomography.
ABSTRACT
Precision metabolomics and quantification for cost-effective rapid diagnosis of disease are the key goals in personalized medicine and point-of-care testing. At present, patients are subjected to multiple test procedures requiring large laboratory equipment. Microelectronics has already made modern computing and communications possible by integration of complex functions within a single chip. As More than Moore technology increases in importance, integrated circuits for densely patterned sensor chips have grown in significance. Here, we present a versatile single complementary metal-oxide-semiconductor chip forming a platform to address personalized needs through on-chip multimodal optical and electrochemical detection that will reduce the number of tests that patients must take. The chip integrates interleaved sensing subsystems for quadruple-mode colorimetric, chemiluminescent, surface plasmon resonance, and hydrogen ion measurements. These subsystems include a photodiode array and a single photon avalanche diode array with some elements functionalized to introduce a surface plasmon resonance mode. The chip also includes an array of ion sensitive field-effect transistors. The sensor arrays are distributed uniformly over an active area on the chip surface in a scalable and modular design. Bio-functionalization of the physical sensors yields a highly selective simultaneous multiple-assay platform in a disposable format. We demonstrate its versatile capabilities through quantified bio-assays performed on-chip for glucose, cholesterol, urea, and urate, each within their naturally occurring physiological range.
Subject(s)
Biomarkers/analysis , Biosensing Techniques/instrumentation , Nanotechnology/instrumentation , Blood Glucose/analysis , Chemistry Techniques, Analytical/instrumentation , Cholesterol/blood , Equipment Design , Humans , Semiconductors , Uric Acid/analysisABSTRACT
Metabolites, the small molecules that underpin life, can act as indicators of the physiological state of the body when their abundance varies, offering routes to diagnosis of many diseases. The ability to assay for multiple metabolites simultaneously will underpin a new generation of precision diagnostic tools. Here, we report the development of a handheld device based on complementary metal oxide semiconductor (CMOS) technology with multiple isolated micro-well reaction zones and integrated optical sensing allowing simultaneous enzyme-based assays of multiple metabolites (choline, xanthine, sarcosine and cholesterol) associated with multiple diseases. These metabolites were measured in clinically relevant concentration range with minimum concentrations measured: 25⯵M for choline, 100⯵M for xanthine, 1.25⯵M for sarcosine and 50⯵M for cholesterol. Linking the device to an Android-based user interface allows for quantification of metabolites in serum and urine within 2â¯min of applying samples to the device. The quantitative performance of the device was validated by comparison to accredited tests for cholesterol and glucose.
Subject(s)
Biosensing Techniques/instrumentation , Lab-On-A-Chip Devices , Point-of-Care Systems , Cholesterol/blood , Cholesterol/urine , Choline/blood , Choline/urine , Equipment Design , Humans , Male , Oxides/chemistry , Sarcosine/blood , Sarcosine/urine , Semiconductors , Xanthine/blood , Xanthine/urineABSTRACT
We have created a novel chip-based diagnostic tools based upon quantification of metabolites using enzymes specific for their chemical conversion. Using this device we show for the first time that a solid-state circuit can be used to measure enzyme kinetics and calculate the Michaelis-Menten constant. Substrate concentration dependency of enzyme reaction rates is central to this aim. Ion-sensitive field effect transistors (ISFET) are excellent transducers for biosensing applications that are reliant upon enzyme assays, especially since they can be fabricated using mainstream microelectronics technology to ensure low unit cost, mass-manufacture, scaling to make many sensors and straightforward miniaturisation for use in point-of-care devices. Here, we describe an integrated ISFET array comprising 2(16) sensors. The device was fabricated with a complementary metal oxide semiconductor (CMOS) process. Unlike traditional CMOS ISFET sensors that use the Si3N4 passivation of the foundry for ion detection, the device reported here was processed with a layer of Ta2O5 that increased the detection sensitivity to 45 mV/pH unit at the sensor readout. The drift was reduced to 0.8 mV/hour with a linear pH response between pH 2-12. A high-speed instrumentation system capable of acquiring nearly 500 fps was developed to stream out the data. The device was then used to measure glucose concentration through the activity of hexokinase in the range of 0.05 mM-231 mM, encompassing glucose's physiological range in blood. Localised and temporal enzyme kinetics of hexokinase was studied in detail. These results present a roadmap towards a viable personal metabolome machine.
Subject(s)
Diagnostic Techniques and Procedures/instrumentation , Enzymes/metabolism , Equipment Design , Humans , Hydrogen-Ion Concentration , Kinetics , Lab-On-A-Chip Devices , Semiconductors , Transistors, ElectronicABSTRACT
We present a device and method for performing vector transmission spectroscopy on biological specimens at terahertz (THz) frequencies. The device consists of artificial dielectric birefringence obtained from silicon microfluidic grating structures. The device can measure the complex dielectric function of a liquid, across a wide THz band of 2 to 5.5 THz, using a Fourier transform infrared spectrometer. Measurement data from a range of liquid specimens, including sucrose, salmon deoxyribonucleic acid (DNA), herring DNA, and bovine serum albumin protein solution in water are presented. The specimen handling is simple, using a microfluidic channel. The transmission through the device is improved significantly and thus the measurement accuracy and bandwidth are increased.
Subject(s)
Birefringence , Silicon/chemistry , Terahertz Spectroscopy/methods , Algorithms , Animals , Cattle , DNA/chemistry , Equipment Design , Fishes , Microfluidics/methods , Microscopy, Electron, Scanning/methods , Models, Statistical , Salmon , Serum Albumin, Bovine/chemistry , Spectrophotometry, Infrared/methods , Spectroscopy, Fourier Transform Infrared/methods , Water/chemistryABSTRACT
Metamaterials (MM), artificial materials engineered to have properties that may not be found in nature, have been widely explored since the first theoretical(1) and experimental demonstration(2) of their unique properties. MMs can provide a highly controllable electromagnetic response, and to date have been demonstrated in every technologically relevant spectral range including the optical(3), near IR(4), mid IR(5) , THz(6) , mm-wave(7) , microwave(8) and radio(9) bands. Applications include perfect lenses(10), sensors(11), telecommunications(12), invisibility cloaks(13) and filters(14,15). We have recently developed single band(16), dual band(17) and broadband(18) THz metamaterial absorber devices capable of greater than 80% absorption at the resonance peak. The concept of a MM absorber is especially important at THz frequencies where it is difficult to find strong frequency selective THz absorbers(19). In our MM absorber the THz radiation is absorbed in a thickness of ~ λ/20, overcoming the thickness limitation of traditional quarter wavelength absorbers. MM absorbers naturally lend themselves to THz detection applications, such as thermal sensors, and if integrated with suitable THz sources (e.g. QCLs), could lead to compact, highly sensitive, low cost, real time THz imaging systems.
Subject(s)
Manufactured Materials , Terahertz Radiation , Absorption , Computer Simulation , Computer-Aided Design , Equipment DesignABSTRACT
A device for performing vector transmission spectroscopy on aqueous and polar solvent specimens at terahertz frequencies is presented. The device enables the direct measurement of the complex dielectric function across the terahertz band using a Fourier transform IR spectrometer for lossy solutions. Using microfluidic sampling, specimen handling is straightforward and direct measurements on polar specimens are made possible. The method is scalable to longer or shorter wavelengths.
ABSTRACT
We have developed low-loss polymer artificial dielectric quarter wave plates (QWP) operating at 2.6, 3.2 and 3.8 THz. The QWPs are imprinted on high density polyethylene (HDPE) using silicon masters. The grating period for the quarter wave plates is 60 microm. 330 microm, 280 microm and 230 microm deep gratings are used to obtain a pi/2 phase retardance between TE and TM polarization propagating through the QWPs. High frequency structure simulator (HFSS) was used to optimize the grating depth. Since the required grating depth is high, two plates, fixed in a back-to-back configuration were used for each QWP. A maximum aspect ratio (grating height/grating width) of 6.6 was used.
ABSTRACT
Apresenta-se um quadro sobre as condiçöes de saúde da populaçäo de baixa renda, em especial da populaçäo infantil, em países em desenvolvimento, bem como a evoluçäo de programas de saúde e de medidas preventivas voltados ao atendimento de crianças carentes, nutrizes, saneamentos e controle de certas endemias, entre outros aspectos também correlacionados, em diversos países, sob os auspícios do Fundo das Naçöes unidas para a Infância - UNICEF. Os programas e seus respectivos progressos, tem como objetivo ajudar a reduzir a taxa de mortalidade e incapacidade infantil, através dos próprios pais de crianças carentes, no mundo em desenvolvimento