Morphological design strategies to tailor out-of-plane charge transport in conjugated polymer systems for device applications.

The transport of charge carriers throughout an active conjugated polymer (CP) host, characterized by a heterogeneous morphology of locally varying degrees of order and disorder, profoundly influences the performance of CP-based electronic devices, including diodes, photovoltaics, sensors, and supercapacitors. Out-of-plane charge carrier mobilities (µout-of-plane) across the bulk of the active material host and in-plane mobilities (µin-plane) parallel to a substrate are highly sensitive to local morphological features along their migration pathways. In general, the magnitudes of µout-of-plane and µin-plane are very different, in part because these carriers experience different morphological environments along their migration pathways. Suppressing the impact of variations in the morphological order/disorder on carrier migration remains an important challenge. While much is known about µin-plane and its optimization for devices, the current challenges are associated with µout-of-plane and its optimization for device performance. Therefore, this review is devoted to strategies for improving µout-of-plane in neat CP films and the implications for more complex systems, such as D:A blends which are relevant to OPV devices. The specific strategies discussed for improving µout-of-plane include solvent/field processing methods, chemical modification, thickness confinement, chemical additives, and different post-annealing strategies, including annealing with supercritical fluids. This review leverages the most recent fundamental understanding of mechanisms of charge transport and connections to morphology, identifying robust design strategies for targeted improvements of µout-of-plane.

Elucidating nanoscale mechanical properties of diabetic human adipose tissue using atomic force microscopy.

Obesity-related type 2 diabetes (DM) is a major public health concern. Adipose tissue metabolic dysfunction, including fibrosis, plays a central role in DM pathogenesis. Obesity is associated with changes in adipose tissue extracellular matrix (ECM), but the impact of these changes on adipose tissue mechanics and their role in metabolic disease is poorly defined. This study utilized atomic force microscopy (AFM) to quantify difference in elasticity between human DM and non-diabetic (NDM) visceral adipose tissue. The mean elastic modulus of DM adipose tissue was twice that of NDM adipose tissue (11.50 kPa vs. 4.48 kPa) to a 95% confidence level, with significant variability in elasticity of DM compared to NDM adipose tissue. Histologic and chemical measures of fibrosis revealed increased hydroxyproline content in DM adipose tissue, but no difference in Sirius Red staining between DM and NDM tissues. These findings support the hypothesis that fibrosis, evidenced by increased elastic modulus, is enhanced in DM adipose tissue, and suggest that measures of tissue mechanics may better resolve disease-specific differences in adipose tissue fibrosis compared with histologic measures. These data demonstrate the power of AFM nanoindentation to probe tissue mechanics, and delineate the impact of metabolic disease on the mechanical properties of adipose tissue.

Self-Assembled Monolayers at the Conjugated Polymer/Electrode Interface: Implications for Charge Transport and Band-Bending Behavior.

The role of self-assembled monolayers (SAMs), trichloro(1 H,1 H,2 H,2 H-perfluorooctyl) (FTS) and octadecyltrichlorosilane (OTS), deposited on indium tin oxide (ITO) substrates, on electronic properties of the poly(3-hexylthiophene) (P3HT)/SAM/ITO system is reported. SAMs, well known for modifying the surface energies of materials, are also known to modify the work functions (WFs) of semiconductors. Unsurprisingly, differences between the band-bending behaviors of P3HT/ITO, P3HT/OTS/ITO, and P3HT/FTS/ITO systems were observed because the SAMs modify the WF of ITO. However, the degrees of band bending occurring in these systems could not be attributed solely to the modified WFs of the substrate. This was apparent based on measurements of samples that included P3HT films prepared with different morphological structures. Changes in the morphological structure, due to different deposition methods and surface energies of the substrates, are necessarily connected to changes in the electronic structure, including changes in the electronic density of states (DOS), of P3HT. An association between (i) the WF differences between P3HT, ITO, and SAM/ITO substrates, (ii) the surface energies of the ITO and SAM/ITO substrates, which influence the morphology of the deposited P3HT layer, (iii) the DOS widths of P3HT, and (iv) the degree of band bending is suggested.

Local Optoelectronic Characterization of Solvent-Annealed, Lead-Free, Bismuth-Based Perovskite Films.

Traditional organolead-halide perovskite-based devices have shown rapid improvements in their power conversion efficiency in less than a decade, yet challenges remain for improving stability and film uniformity, as well as the elimination of lead to address toxicity issues. We fabricated lead-free methylammonium bismuth iodide (MBI) perovskite films and studied the effect of solvent annealing with dimethylformamide (DMF) on both (1) the crystallinity and structure of the films with X-ray diffraction and scanning electron microscopy and (2) the local optoelectronic properties of the films as measured via (photo)conductive atomic force microscopy. We found that solvent annealing leads to improved crystallinity and increased grain size in the MBI films as compared to the thermally annealed films. Furthermore, solvent-annealed MBI films show significantly increased electrical conductivity in the out-of-plane direction. Photoconductivity in both solvent-annealed and thermally annealed MBI films was increased in the grain interiors versus the grain boundaries. It was observed that DMF-induced solvent annealing impacts charge transport through the film, which can be a unique design parameter for optimizing local optoelectronic properties. By studying how solvent annealing affects the MBI film structure and changes the ways in which charges are transported through the film, we have developed a better understanding of how local optoelectronic properties are affected by DMF annealing.

Unusual multiscale mechanics of biomimetic nanoparticle hydrogels.

Viscoelastic properties are central for gels and other materials. Simultaneously, high storage and loss moduli are difficult to attain due to their contrarian requirements to chemical structure. Biomimetic inorganic nanoparticles offer a promising toolbox for multiscale engineering of gel mechanics, but a conceptual framework for their molecular, nanoscale, mesoscale, and microscale engineering as viscoelastic materials is absent. Here we show nanoparticle gels with simultaneously high storage and loss moduli from CdTe nanoparticles. Viscoelastic figure of merit reaches 1.83 MPa exceeding that of comparable gels by 100-1000 times for glutathione-stabilized nanoparticles. The gels made from the smallest nanoparticles display the highest stiffness, which was attributed to the drastic change of GSH configurations when nanoparticles decrease in size. A computational model accounting for the difference in nanoparticle interactions for variable GSH configurations describes the unusual trends of nanoparticle gel viscoelasticity. These observations are generalizable to other NP gels interconnected by supramolecular interactions and lead to materials with high-load bearing abilities and energy dissipation needed for multiple technologies.

Free Surface Relaxations of Star-Shaped Polymer Films.

The surface relaxation dynamics of supported star-shaped polymer thin films are shown to be slower than the bulk, persisting up to temperatures at least 50 K above the bulk glass transition temperature T_{g}^{bulk}. This behavior, exhibited by star-shaped polystyrenes with functionality f=8 arms and molecular weights per arm M_{arm}

Crystallization Mechanism and Charge Carrier Transport in MAPLE-Deposited Conjugated Polymer Thin Films.

Although spin casting and chemical surface reactions are the most common methods used for fabricating functional polymer films onto substrates, they are limited with regard to producing films of certain morphological characteristics on different wetting and nonwetting substrates. The matrix-assisted pulsed laser evaporation (MAPLE) technique offers advantages with regard to producing films of different morphologies on different types of substrates. Here, we provide a quantitative characterization, using X-ray diffraction and optical methods, to elucidate the additive growth mechanism of MAPLE-deposited poly(3-hexylthiophene) (P3HT) films on substrates that have undergone different surface treatments, enabling them to possess different wettabilities. We show that MAPLE-deposited films are composed of crystalline phases, wherein the overall P3HT aggregate size and crystallite coherence length increase with deposition time. A complete pole figure constructed from X-ray diffraction measurements reveals that in these MAPLE-deposited films, there exist two distinct crystallite populations: (i) highly oriented crystals that grow from the flat dielectric substrate and (ii) misoriented crystals that preferentially grow on top of the existing polymer layers. The growth of the highly oriented crystals is highly sensitive to the chemistry of the substrate, whereas the effect of substrate chemistry on misoriented crystal growth is weaker. The use of a self-assembled monolayer to treat the substrate greatly enhances the population and crystallite coherence length at the buried interfaces, particularly during the early stage of deposition. The evolution of the in-plane carrier mobilities during the course of deposition is consistent with the development of highly oriented crystals at the buried interface, suggesting that this interface plays a key role toward determining carrier transport in organic thin-film transistors.

Rheological State Diagrams for Rough Colloids in Shear Flow.

To assess the role of particle roughness in the rheological phenomena of concentrated colloidal suspensions, we develop model colloids with varying surface roughness length scales up to 10% of the particle radius. Increasing surface roughness shifts the onset of both shear thickening and dilatancy towards lower volume fractions and critical stresses. Experimental data are supported by computer simulations of spherical colloids with adjustable friction coefficients, demonstrating that a reduction in the onset stress of thickening and a sign change in the first normal stresses occur when friction competes with lubrication. In the quasi-Newtonian flow regime, roughness increases the effective packing fraction of colloids. As the shear stress increases and suspensions of rough colloids approach jamming, the first normal stresses switch signs and the critical force required to generate contacts is drastically reduced. This is likely a signature of the lubrication films giving way to roughness-induced tangential interactions that bring about load-bearing contacts in the compression axis of flow.

Role of "Hard" and "Soft" Confinement on Polymer Dynamics at the Nanoscale.

We investigated the segmental dynamics of asymmetrically confined polymer films and report an unusual phenomenon in which the presence and thickness of a soft confining layer are responsible for significant changes in the segmental dynamics of the confined films. Specifically, the segmental dynamics of poly(vinyl alcohol) (PVA) thin films asymmetrically confined between hard aluminum (Al), and soft polystyrene (PS) films are shown to shift by as much as half an order of magnitude upon changes in the thicknesses of the confining PS layer. These effects are more significant than those due to symmetric confinement between hard Al substrates or exposure to a free surface. These observations, partially rationalized in terms of recent simulations and theory, implicate the role of the moduli of the confining layers.

Enhancing Carrier Mobilities in Organic Thin-Film Transistors Through Morphological Changes at the Semiconductor/Dielectric Interface Using Supercritical Carbon Dioxide Processing.

Charge-carrier mobilities in poly(3-hexylthiophene) (P3HT) organic thin-film transistors (OTFTs) increase 5-fold when OTFTs composed of P3HT films on trichloro (1H, 1H, 2H, 2H-perfluorooctyl) silane (FTS) monolayers supported on SiO2 dielectric substrates (P3HT/FTS/SiO2/Si) are subjected to supercritical carbon dioxide (scCO2) processing. In contrast, carrier mobilities in P3HT/octadecyltrichlorosilane (OTS)/SiO2 OTFTs processed using scCO2 are comparable to mobilities measured in as-cast P3HT/OTS/SiO2/Si devices. Topographical images of the free and buried interfaces of P3HT films reveal that scCO2 selectively alters the P3HT morphology near the buried P3HT/FTS-SiO2 interface; identical processing has negligible effects at the P3HT/OTS-SiO2 interface. A combination of spectroscopic ellipsometry and grazing-incidence X-ray diffraction experiments indicate insignificant change in the orientation distribution of the intermolecular π-π stacking direction of P3HT/FTS with scCO2 processing. The improved mobilities are instead correlated with enhanced in-plane orientation of the conjugated chain backbone of P3HT after scCO2 annealing. These findings suggest a strong dependence of polymer processing on the nature of polymer/substrate interface and the important role of backbone orientation toward dictating charge transport of OTFTs.

Phase behavior of diblock copolymer/star-shaped polymer thin film mixtures.

We investigated the phase behavior of thin film, thickness h≈ 100 nm, mixtures of a polystyrene-b-poly(2-vinylpyridine) (PS-b-P2VP) diblock copolymer with star-shaped polystyrene (SPS) molecules of varying functionalities f, where 4 ≤f≤ 64, and molecular weights per arm Marm. The miscibility of the system and the surface composition varied appreciably with Marm and f. For large values of Marm, regardless of f, the miscibility of the system was qualitatively similar to that of linear chain PS/PS-b-P2VP mixtures - the copolymer chains aggregate to form micelles, each composed of an inner P2VP core and PS corona, which preferentially segregate to the free surface. On the other hand, for large f and small Marm, SPS molecules preferentially resided at the free surface. Moreover, blends containing SPS molecules with the highest values of f and lowest values of Marm were phase separated. These observations are rationalized in terms of competing entropic interactions and the dependence of the surface tension of the star-shaped molecules on Marm and f.

Zinc oxide nanoparticle suspensions and layer-by-layer coatings inhibit staphylococcal growth.

Despite a decade of engineering and process improvements, bacterial infection remains the primary threat to implanted medical devices. Zinc oxide nanoparticles (ZnO-NPs) have demonstrated antimicrobial properties. Their microbial selectivity, stability, ease of production, and low cost make them attractive alternatives to silver NPs or antimicrobial peptides. Here we sought to (1) determine the relative efficacy of ZnO-NPs on planktonic growth of medically relevant pathogens; (2) establish the role of bacterial surface chemistry on ZnO-NP effectiveness; (3) evaluate NP shape as a factor in the dose-response; and (4) evaluate layer-by-layer (LBL) ZnO-NP surface coatings on biofilm growth. ZnO-NPs inhibited bacterial growth in a shape-dependent manner not previously seen or predicted. Pyramid shaped particles were the most effective and contrary to previous work, larger particles were more effective than smaller particles. Differential susceptibility of pathogens may be related to their surface hydrophobicity. LBL ZnO-NO coatings reduced staphylococcal biofilm burden by >95%. From the Clinical Editor: The use of medical implants is widespread. However, bacterial colonization remains a major concern. In this article, the authors investigated the use of zinc oxide nanoparticles (ZnO-NPs) to prevent bacterial infection. They showed in their experiments that ZnO-NPs significantly inhibited bacterial growth. This work may present a new alternative in using ZnO-NPs in medical devices.

Elastic Mechanical Response of Thin Supported Star-Shaped Polymer Films.

We show evidence of thickness-dependent elastic mechanical moduli that are associated largely with the effects of architecture (topology) and the overall shape of the macromolecule. Atomic force microscopy (AFM) based nanoindentation experiments were performed on linear chain polystyrene (LPS) and star-shaped polystyrene (SPS) macromolecules of varying functionalities (number of arms, f) and molecular weights per arm Mwarm. The out-of-plane elastic moduli E(h) increased with decreasing film thickness, h, for h less than a threshold film thickness, hth. For SPS with f ≤ 64 and Mwarm > 9 kg/mol, the dependencies of E(h) on h were virtually identical for the linear chains. Notably, however, for SPS with f = 64 and Mwarm = 9 kg/mol (SPS-9k-64), the hth was over 50% larger than that of the other polymers. These observations are rationalized in terms of the structure of the polymer for high f and sufficiently small Mwarm and not in terms of the influence of interfacial interactions.

Surprisingly High Conductivity and Efficient Exciton Blocking in Fullerene/Wide-Energy-Gap Small Molecule Mixtures.

We find that mixtures of C60 with the wide energy gap, small molecular weight semiconductor bathophenanthroline (BPhen) exhibit a combination of surprisingly high electron conductivity and efficient exciton blocking when employed as buffer layers in organic photovoltaic cells. Photoluminescence quenching measurements show that a 1:1 BPhen/C60 mixed layer has an exciton blocking efficiency of 84 ± 5% compared to that of 100% for a neat BPhen layer. This high blocking efficiency is accompanied by a 100-fold increase in electron conductivity compared with neat BPhen. Transient photocurrent measurements show that charge transport through a neat BPhen buffer is dispersive, in contrast to nondispersive transport in the compound buffer. Interestingly, although the conductivity is high, there is no clearly defined insulating-to-conducting phase transition with increased insulating BPhen fraction. Thus, we infer that C60 undergoes nanoscale (<10 nm domain size) phase segregation even at very high (>80%) BPhen fractions.

Structure and dynamical intra-molecular heterogeneity of star polymer melts above glass transition temperature.

Structural and dynamical properties of star melts have been investigated with molecular dynamics simulations of a bead-spring model. Star polymers are known to be heterogeneous, but a systematic simulation study of their properties in melt conditions near the glass transition temperature was lacking. To probe their properties, we have expanded from linear to star polymers the applicability of Dobkowski's chain-length dependence correlation function [Z. Dobkowski, Eur. Polym. J. 18, 563 (1982)]. The density and the isokinetic temperature, based on the canonical definition of the laboratory glass-transition, can be described well by the correlation function and a subtle behavior manifests as the architecture becomes more complex. For linear polymer chains and low functionality star polymers, we find that an increase of the arm length would result in an increase of the density and the isokinetic temperature, but high functionality star polymers have the opposite behavior. The effect between low and high functionalities is more pronounced for short arm lengths. Complementary results such as the specific volume and number of neighbors in contact provide further insights on the subtle relation between structure and dynamics. The findings would be valuable to polymer, colloidal, and nanocomposites fields for the design of materials in absence of solution with the desired properties.

The elastic mechanical response of supported thin polymer films.

Nanoindentation studies of the mechanical properties of sufficiently thin polymer films, supported by stiff substrates, indicate that the mechanical moduli are generally higher than those of the bulk. This enhancement of the effective modulus, in the thickness range of few hundred nanometers, is indicated to be associated with the propagation and impingement of the indentation tip induced stress field with the rigid underlying substrate; this is the so-called "substrate effect". This behavior has been rationalized completely in terms of the moduli and Poisson's ratios of the individual components, for the systems investigated thus far. Here we show that for thin supported polymer films, in general, information regarding the local chain stiffness and local vibrational constants of the polymers provides an appropriate rationalization of the overall mechanical response of polymers of differing chemical structures and polymer-substrate interactions. Our study should provide impetus for atomistic simulations that carefully account for the role of intermolecular interactions on the mechanical response of supported polymer thin films.

Surface dynamics of miscible polymer blend nanocomposites.

Diverse processes that include energy conversion, wettability, lubrication, adhesion, and surface-directed phase separation in mixtures fundamentally depend on the structure and dynamics of materials' surfaces and interfaces. We report an unusual phenomenon wherein the surface viscosity of polymer nanocomposites of polystyrene (PS), polyvinyl methyl ether (PVME), and PS-coated gold nanoparticles (PS/PVME/PS-Au) is over an order of magnitude smaller than that of the neat miscible PS/PVME blend. Our X-ray photon correlation spectroscopy studies of the surface dynamics also reveal that the polymer chains manifest dynamics associated with two separate average compositional environments: a PVME-rich region, significantly in excess of its bulk concentration, and a separate PS-rich environment, where the dynamics are approximately 2 orders of magnitude slower. The unusually rapid surface dynamics in the PS/PVME/PS-Au nanocomposite are due largely to the excess PVME chains and the polymer/brush-coated nanoparticle interactions at the free surface.

Electrorheology of suspensions containing interfacially active constituents.

We recently showed that a suspension of micrometer-sized polystyrene (PS) particles in a PDMS liquid, mixed with small (1 wt %) amounts of a nanocage, sulfonated polyhedral oligomeric silsesquioxane (s-POSS), exhibited significant electrorheological (ER) behavior. This behavior was associated with the formation of a thin adsorbed layer of s-POSS onto the surfaces of PS and the subsequent formation of polarization-induced aggregates, or structures, responsible for the ER effect in an applied electric, E, field. Current theory suggests that the ER effect would largely be determined by the dielectric and conductive properties of the conductive layer of core/shell particles in ER suspensions. We show here that sulfonated-PS (s-PS)/PDMS suspensions exhibit further increases in the yield stress of over 200%, with the addition of s-POSS. The yield stress of this system, moreover, scales as τy [proportionality] E(2). The dielectric relaxation studies reveal the existence of a new relaxation peak in the s-POSS/s-PS/PDMS system that is absent in the s-POSS/PS/PDMS suspension. The relative sizes of these peaks are sensitive to the concentration of s-POSS and are associated with changes in the ER behavior. The properties of this class of ER fluids are not appropriately rationalized in terms of current theories.

Surface Layer Dynamics in Miscible Polymer Blends.

In thin film A/B polymer/polymer mixtures, the formation of a layer at the free surface, with average composition that differs from the bulk, due to the preferential segregation of the lower cohesive energy density component, is well understood. While much is also understood about this surface layer formation and growth to date, virtually nothing is known about the surface dynamics of the chains in such mixtures. Questions about the surface chain dynamics in relation to the bulk have remained unanswered. With the use of X-ray photon correlation spectroscopy (XPCS) we show that the dynamics of poly(vinyl methyl ether) (PVME) chains at the free surface of polystyrene (PS)/PVME thin film mixtures can be orders of magnitude larger than the PVME chains in the bulk. These dynamics manifest from differences between the local compositions of the blend at the free surface and the bulk, as well as film thickness constraints.

Effect of thickness-dependent microstructure on the out-of-plane hole mobility in poly(3-hexylthiophene) films.

Regioregular poly(3-hexylthiophene) (RR-P3HT) is a widely used donor material for bulk heterojunction polymer solar cells. While much is known about the structure and properties of RR-P3HT films, important questions regarding hole mobilities in this material remain unresolved. Measurements of the out-of-plane hole mobilities, µ, of RR-P3HT films have been restricted to films in the thickness regime on the order of micrometers, beyond that generally used in solar cells, where the film thicknesses are typically 100 to 200 nm. Studies of in-plane carrier mobilities have been conducted in thinner films, in the thickness range 100-200 nm. However, the in-plane and out-of-plane hole mobilities in RR-P3HT can be significantly different. We show here that the out-of-plane hole mobilities in neat RR-P3HT films increase by an order of magnitude, from 10(-4) cm(2)/V·s, for a 80 nm thick film, to a value of 10(-3) cm(2)/V·s for films thicker than 700 nm. Through a combination of morphological characterization and simulations, we show that the thickness dependent mobilities are not only associated with the differences between the average morphologies of thick films and thin films, but specifically associated with changes in the local morphology of films as a function of distance from the interfaces.