Photophysical Studies at Cryogenic Temperature Reveal a Novel Photoswitching Mechanism of rsEGFP2.

Single-molecule localization microscopy (SMLM) at cryogenic temperature opens new avenues to investigate intact biological samples at the nanoscale and perform cryo-correlative studies. Genetically encoded fluorescent proteins (FPs) are markers of choice for cryo-SMLM, but their reduced conformational flexibility below the glass-transition temperature hampers efficient cryo-photoswitching. We investigated cryo-switching of rsEGFP2, one of the most efficient reversibly switchable fluorescent proteins at ambient temperature due to facile cis-trans isomerization of the chromophore. UV-visible microspectrophotometry and X-ray crystallography revealed a completely different switching mechanism at ∼110 K. At this cryogenic temperature, on-off photoswitching involves the formation of two off-states in cis conformation with blue-shifted absorption relative to that of the trans protonated chromophore populated at ambient temperature. Only one of these off-states can be switched back to the fluorescent on-state by 405 nm light, while both of them are sensitive to UV light at 355 nm. Superior recovery to the fluorescent on-state by 355 nm light was confirmed at the single-molecule level. This suggests, as also shown by simulations, that employing 355 nm light in cryo-SMLM experiments using rsEGFP2 and possibly other FPs could improve the effective labeling efficiency achievable with this technique. The rsEGFP2 photoswitching mechanism discovered in this work adds to the panoply of known switching mechanisms in fluorescent proteins.

Metal-Induced Energy Transfer (MIET) for Live-Cell Imaging with Fluorescent Proteins.

Metal-induced energy transfer (MIET) imaging is an easy-to-implement super-resolution modality that achieves nanometer resolution along the optical axis of a microscope. Although its capability in numerous biological and biophysical studies has been demonstrated, its implementation for live-cell imaging with fluorescent proteins is still lacking. Here, we present its applicability and capabilities for live-cell imaging with fluorescent proteins in diverse cell types (adult human stem cells, human osteo-sarcoma cells, and Dictyostelium discoideum cells), and with various fluorescent proteins (GFP, mScarlet, RFP, YPet). We show that MIET imaging achieves nanometer axial mapping of living cellular and subcellular components across multiple time scales, from a few milliseconds to hours, with negligible phototoxic effects.

Single-Molecule Fluorescence Lifetime Imaging Using Wide-Field and Confocal-Laser Scanning Microscopy: A Comparative Analysis.

A recent addition to the toolbox of super-resolution microscopy methods is fluorescence-lifetime single-molecule localization microscopy (FL-SMLM). The synergy of SMLM and fluorescence-lifetime imaging microscopy (FLIM) combines superior image resolution with lifetime information and can be realized using two complementary experimental approaches: confocal-laser scanning microscopy (CLSM) or wide-field microscopy. Here, we systematically and comprehensively compare these two novel FL-SMLM approaches in different spectral regions. For wide-field FL-SMLM, we use a commercial lifetime camera, and for CLSM-based FL-SMLM we employ a home-built system equipped with a rapid scan unit and a single-photon detector. We characterize the performances of the two systems in localizing single emitters in 3D by combining FL-SMLM with metal-induced energy transfer (MIET) for localization along the third dimension and in the lifetime-based multiplexed bioimaging using DNA-PAINT. Finally, we discuss advantages and disadvantages of wide-field and confocal FL-SMLM and provide practical advice on rational FL-SMLM experiment design.

Measuring Photophysical Transition Rates with Fluorescence Correlation Spectroscopy and Antibunching.

We present a new method that combines fluorescence correlation spectroscopy (FCS) on the microsecond time scale with fluorescence antibunching measurements on the nanosecond time scale for measuring photophysical rate constants of fluorescent molecules. The antibunching measurements allow us to quantify the average excitation rate of fluorescent molecules within the confocal detection volume of the FCS measurement setup. Knowledge of this value allows us then to quantify, in an absolute manner, the intersystem crossing rate and triplet state lifetime from the microsecond temporal decay of the FCS curves. We present a theoretical analysis of the method and estimate the maximum bias caused by the averaging of all quantities (excitation rate and photophysical rates) over the confocal detection volume, and we show that this bias is smaller than 5% in most cases. We apply the method for measuring the photophysical rate constants of the widely used dyes Rhodamine 110 and ATTO 655.

Modeling charge separation in charged nanochannels for single-molecule electrometry.

We model the transport of electrically charged solute molecules by a laminar flow within a nanoslit microfluidic channel with electrostatic surface potential. We derive the governing convection-diffusion equation, solve it numerically, and compare it with a Taylor-Aris-like approximation, which gives excellent results for small Péclet numbers. We discuss our results in light of designing an assay that can measure simultaneously the hydrodynamic size and electric charge of single molecules by tracking their motion in such nanoslit channels with electrostatic surface potential.

Fluorescence lifetime DNA-PAINT for multiplexed super-resolution imaging of cells.

DNA point accumulation for imaging in nanoscale topography (DNA-PAINT) is a powerful super-resolution technique highly suitable for multi-target (multiplexing) bio-imaging. However, multiplexed imaging of cells is still challenging due to the dense and sticky environment inside a cell. Here, we combine fluorescence lifetime imaging microscopy (FLIM) with DNA-PAINT and use the lifetime information as a multiplexing parameter for targets identification. In contrast to Exchange-PAINT, fluorescence lifetime PAINT (FL-PAINT) can image multiple targets simultaneously and does not require any fluid exchange, thus leaving the sample undisturbed and making the use of flow chambers/microfluidic systems unnecessary. We demonstrate the potential of FL-PAINT by simultaneous imaging of up to three targets in a cell using both wide-field FLIM and 3D time-resolved confocal laser scanning microscopy (CLSM). FL-PAINT can be readily combined with other existing techniques of multiplexed imaging and is therefore a perfect candidate for high-throughput multi-target bio-imaging.

Rapid multi-plane phase-contrast microscopy reveals torsional dynamics in flagellar motion.

High speed volumetric optical microscopy is an important tool for observing rapid processes in living cells or for real-time tracking of sub-cellular components. However, the 3D imaging capability often comes at the price of a high technical complexity of the imaging system and/or the requirement of demanding image analysis. Here, we propose a combination of conventional phase-contrast imaging with a customized multi-plane beam-splitter for enabling simultaneous acquisition of images in eight different focal planes. Our method is technically straightforward and does not require complex post-processing image analysis. We apply our multi-plane phase-contrast microscope to the real-time observation of the fast motion of reactivated Chlamydomonas axonemes with sub-µm spatial and 4 ms temporal resolution. Our system allows us to observe not only bending but also the three-dimensional torsional dynamics of these micro-swimmers.

Instant three-color multiplane fluorescence microscopy.

One of the most widely used microscopy techniques in biology and medicine is fluorescence microscopy, offering high specificity in labeling as well as maximal sensitivity. For live-cell imaging, the ideal fluorescence microscope should offer high spatial resolution, fast image acquisition, three-dimensional sectioning, and multicolor detection. However, most existing fluorescence microscopes have to compromise between these different requirements. Here, we present a multiplane, multicolor wide-field microscope that uses a dedicated beam splitter for recording volumetric data in eight focal planes and for three emission colors with frame rates of hundreds of volumes per second. We demonstrate the efficiency and performance of our system by three-dimensional imaging of multiply labeled fixed and living cells. The use of commercially available components makes our proposed microscope straightforward for implementation, thus promising for widely used applications.

Doubling the resolution of a confocal spinning-disk microscope using image scanning microscopy.

Fluorescence microscopy has become an indispensable tool for cell biology. Recently, super-resolution methods have been developed to overcome the diffraction limit of light and have shown living cells in unprecedented detail. Often, these methods come at a high cost and with complexity in terms of instrumentation and sample preparation, thus calling for the development of low-cost, more accessible methods. We previously developed image scanning microscopy (ISM), which uses structured illumination to double the resolution and quadruple the contrast of a confocal microscope. Implementing this technique into a confocal spinning-disk (CSD) microscope allows recording ISM images with up to ~1 frame per second, making it ideal for imaging dynamic biological processes. Here we present a step-by-step protocol describing how to convert any existing commercial CSD microscope into a CSD-ISM, with only moderate changes to the hardware and at low cost. Operation of the CSD-ISM is realized with a field programmable gate array using the software environment Micro-Manager, a popular open-source platform for microscopy. The provided software ( https://projects.gwdg.de/projects/csdism-2020 ) takes care of all algorithmic complexities and numerical workload of the CSD-ISM, including hardware synchronization and image reconstruction. The hardware modifications described here result in a theoretical maximum increase in resolution of √2 ≈ 1.41, which can be further improved by deconvolution to obtain a theoretical maximum twofold increase. An existing CSD setup can be upgraded in ~3 d by anyone with basic knowledge in optics, electronics and microscopy software.

Structural myelin defects are associated with low axonal ATP levels but rapid recovery from energy deprivation in a mouse model of spastic paraplegia.

In several neurodegenerative disorders, axonal pathology may originate from impaired oligodendrocyte-to-axon support of energy substrates. We previously established transgenic mice that allow measuring axonal ATP levels in electrically active optic nerves. Here, we utilize this technique to explore axonal ATP dynamics in the Plpnull/y mouse model of spastic paraplegia. Optic nerves from Plpnull/y mice exhibited lower and more variable basal axonal ATP levels and reduced compound action potential (CAP) amplitudes, providing a missing link between axonal pathology and a role of oligodendrocytes in brain energy metabolism. Surprisingly, when Plpnull/y optic nerves are challenged with transient glucose deprivation, both ATP levels and CAP decline slower, but recover faster upon reperfusion of glucose. Structurally, myelin sheaths display an increased frequency of cytosolic channels comprising glucose and monocarboxylate transporters, possibly facilitating accessibility of energy substrates to the axon. These data imply that complex metabolic alterations of the axon-myelin unit contribute to the phenotype of Plpnull/y mice.

Absolute quantum yield measurements of fluorescent proteins using a plasmonic nanocavity.

One of the key photophysical properties of fluorescent proteins that is most difficult to measure is the quantum yield. It describes how efficiently a fluorophore converts absorbed light into fluorescence. Its measurement using conventional methods become particularly problematic when it is unknown how many of the proposedly fluorescent molecules of a sample are indeed fluorescent (for example due to incomplete maturation, or the presence of photophysical dark states). Here, we use a plasmonic nanocavity-based method to measure absolute quantum yield values of commonly used fluorescent proteins. The method is calibration-free, does not require knowledge about maturation or potential dark states, and works on minute amounts of sample. The insensitivity of the nanocavity-based method to the presence of non-luminescent species allowed us to measure precisely the quantum yield of photo-switchable proteins in their on-state and to analyze the origin of the residual fluorescence of protein ensembles switched to the dark state.

Single-molecule confinement with uniform electrodynamic nanofluidics.

To date, we could not engineer Nature's ability to dynamically handle diffusing single molecules in the liquid-phase as it takes place in pore-forming proteins and tunnelling nanotubes. Consistent handling of individual single molecules in a liquid is of paramount importance to fundamental molecular studies and technological benefits, like single-molecule level separation and sorting for early biomedical diagnostics, microscopic studies of molecular interactions and electron/optical microscopy of molecules and nanomaterials. We can consistently resolve the dynamics of diffusing single molecules if they are confined within a uniform dielectric environment at nanometre length-scales. A uniform dielectric environment is the key characteristic since intrinsic electronic properties of molecules were modified while interacting with any surfaces, and the effect is not the same from one dielectric surface to another. We present dynamic nanofluidic detection of optically active single molecules in a liquid. An all-silica nanofluidic environment was used to electrokinetically handle individual single-molecules where molecular shot noise was resolved. We recorded the single-molecule motion of small fragments of DNA, carbon-nanodots, and organic fluorophores in water. The electrokinetic 1D molecular mass transport under two-focus fluorescence correlation spectroscopy (2fFCS) showed confinement-induced modified molecular interactions (due to various inter-molecular repulsive and attractive forces), which have been theoretically interpreted as molecular shot noise. Our demonstration of high-throughput nanochannel fabrication, 2fFCS-based 1D confined detection of fast-moving single molecules and fundamental understanding of molecular shot noise may open an avenue for single-molecule experiments where physical manipulation of dynamics is necessary.

Dual-Color Metal-Induced Energy Transfer (MIET) Imaging for Three-Dimensional Reconstruction of Nuclear Envelope Architecture.

The nuclear envelope, comprising the inner and the outer nuclear membrane, separates the nucleus from the cytoplasm and plays a key role in cellular functions. Nuclear pore complexes (NPCs) are embedded in the nuclear envelope and control transport of macromolecules between the two compartments. Recently, it has been shown that the axial distance between the inner nuclear membrane and the cytoplasmic side of the NPC can be measured using dual-color metal-induced energy transfer (MIET). This chapter focuses on experimental aspects of this method and discusses the details of data analysis.

Fluorescence fluctuation analysis reveals PpV dependent Cdc25 protein dynamics in living embryos.

The protein phosphatase Cdc25 is a key regulator of the cell cycle by activating Cdk-cyclin complexes. Cdc25 is regulated by its expression levels and post-translational mechanisms. In early Drosophila embryogenesis, Cdc25/Twine drives the fast and synchronous nuclear cycles. A pause in the cell cycle and the remodeling to a more generic cell cycle mode with a gap phase are determined by Twine inactivation and destruction in early interphase 14, in response to zygotic genome activation. Although the pseudokinase Tribbles contributes to the timely degradation of Twine, Twine levels are controlled by additional yet unknown post-translational mechanisms. Here, we apply a non-invasive method based on fluorescence fluctuation analysis (FFA) to record the absolute concentration profiles of Twine with minute-scale resolution in single living embryos. Employing this assay, we found that Protein phosphatase V (PpV), the homologue of the catalytic subunit of human PP6, ensures appropriately low Twine protein levels at the onset of interphase 14. PpV controls directly or indirectly the phosphorylation of Twine at multiple serine and threonine residues as revealed by phosphosite mapping. Mutational analysis confirmed that these sites are involved in control of Twine protein dynamics, and cell cycle remodeling is delayed in a fraction of the phosphosite mutant embryos. Our data reveal a novel mechanism for control of Twine protein levels and their significance for embryonic cell cycle remodeling.

Wide-Field Fluorescence Lifetime Imaging of Single Molecules.

Fluorescence lifetime imaging (FLIM) has become an important microscopy technique in bioimaging. The two most important of its applications are lifetime-multiplexing for imaging many different structures in parallel, and lifetime-based measurements of Förster resonance energy transfer. There are two principal FLIM techniques, one based on confocal-laser scanning microscopy (CLSM) and time-correlated single-photon counting (TCSPC) and the other based on wide-field microscopy and phase fluorometry. Although the first approach (CLSM-TCSPC) assures high sensitivity and allows one to detect single molecules, it is slow and has a small photon yield. The second allows, in principal, high frame rates (by 2-3 orders of magnitude faster than CLSM), but it suffers from low sensitivity, which precludes its application for single-molecule imaging. Here, we demonstrate that a novel wide-field TCSPC camera (LINCam25, Photonscore GmbH) can be successfully used for single-molecule FLIM, although its quantum yield of detection in the red spectral region is only ∼5%. This is due to the virtually absent background and readout noise of the camera, assuring high signal-to-noise ratio even at low detection efficiency. We performed single-molecule FLIM of different red fluorophores, and we use the lifetime information for successfully distinguishing between different molecular species. Finally, we demonstrate single-molecule metal-induced energy transfer (MIET) imaging which is a first step for three-dimensional single-molecule localization microscopy (SMLM) with nanometer resolution.

Multi-target immunofluorescence by separation of antibody cross-labelling via spectral-FLIM-FRET.

In biomedical research, indirect immunofluorescence labelling by use of primary and secondary antibodies is central for revealing the spatial distribution of multiple cellular antigens. However, labelling is regularly restricted to few antigens since species variation of primary and corresponding secondary antibodies is limited bearing the risk of unspecific cross-labelling. Here, we introduce a novel microscopic procedure for leveraging undesirable cross-labelling effects among secondary antibodies thereby increasing the number of fluorophore channels. Under cross-labelling conditions, commonly used fluorophores change chemical-physical properties by 'Förster resonance energy transfer' leading to defined changes in spectral emission and lifetime decay. By use of spectral fluorescence lifetime imaging and pattern-matching, we demonstrate precise separation of cross-labelled cellular antigens where conventional imaging completely fails. Consequently, this undesired effect serves for an innovative imaging procedure to separate critical antigens where antibody species variation is limited and allows for multi-target labelling by attribution of new fluorophore cross-labelling channels.

Image scanning microscopy.

Image Scanning Microscopy (ISM) has emerged as a successful and robust technique which nearly doubles the spatial resolution of a confocal microscope by simple means. Meanwhile, it has found implementation into several highly successful commercial systems, and it has branched into different experimental realizations. The review gives a brief introduction into the basic principles of ISM, and it reports about recent progress and applications of this new microscopy technique.

Excitation and Emission Transition Dipoles of Type-II Semiconductor Nanorods.

The mechanisms of exciton generation and recombination in semiconductor nanocrystals are crucial to the understanding of their photophysics and for their application in nearly all fields. While many studies have been focused on type-I heterojunction nanocrystals, the photophysics of type-II nanorods, where the hole is located in the core and the electron is located in the shell of the nanorod, remain largely unexplored. In this work, by scanning single nanorods through the focal spot of radially and azimuthally polarized laser beams and by comparing the measured excitation patterns with a theoretical model, we determine the dimensionality of the excitation transition dipole of single type-II nanorods. Additionally, by recording defocused patterns of the emission of the same particles, we measure their emission transition dipoles. The combination of these techniques allows us to unambiguously deduce the dimensionality and orientation of both excitation and emission transition dipoles of single type-II semiconductor nanorods. The results show that in contrast to previously studied quantum emitters, the particles possess a 3D degenerate excitation and a fixed linear emission transition dipole.

Monomerization of the photoconvertible fluorescent protein SAASoti by rational mutagenesis of single amino acids.

Photoconvertible fluorescent proteins (PCFPs) are widely used as markers for the visualization of intracellular processes and for sub-diffraction single-molecule localization microscopy. Although wild type of a new photoconvertible fluorescent protein SAASoti tends to aggregate, we succeeded, via rational mutagenesis, to obtain variants that formed either tetramers or monomers. We compare two approaches: one is based on the structural similarity between SAASoti and Kaede, which helped us to identify a single point mutation (V127T) at the protein's hydrophobic interface that leads to monomerization. The other is based on a chemical modification of amino groups of SAASoti with succinic anhydride, which converts the protein aggregates into monomers. Mass-spectrometric analysis helped us to identify that the modification of a single ε-amino group of lysine K145 in the strongly charged interface AB was sufficient to convert the protein into its tetrameric form. Furthermore, site-directed mutagenesis was used to generate mutants that proved to be either monomeric or tetrameric, both capable of rapid green-to-red photoconversion. This allows SAASoti to be used as a photoconvertible fluorescent marker for in vivo cell studies.

Three-dimensional single-molecule localization with nanometer accuracy using Metal-Induced Energy Transfer (MIET) imaging.

Our paper presents the first theoretical and experimental study using single-molecule Metal-Induced Energy Transfer (smMIET) for localizing single fluorescent molecules in three dimensions. Metal-Induced Energy Transfer describes the resonant energy transfer from the excited state of a fluorescent emitter to surface plasmons in a metal nanostructure. This energy transfer is strongly distance-dependent and can be used to localize an emitter along one dimension. We have used Metal-Induced Energy Transfer in the past for localizing fluorescent emitters with nanometer accuracy along the optical axis of a microscope. The combination of smMIET with single-molecule localization based super-resolution microscopy that provides nanometer lateral localization accuracy offers the prospect of achieving isotropic nanometer localization accuracy in all three spatial dimensions. We give a thorough theoretical explanation and analysis of smMIET, describe its experimental requirements, also in its combination with lateral single-molecule localization techniques, and present first proof-of-principle experiments using dye molecules immobilized on top of a silica spacer, and of dye molecules embedded in thin polymer films.