ABSTRACT
The precise control of molecular self-assembly on surfaces presents many opportunities for the creation of complex nanostructures. Within this endeavor, selective patterning by exploiting molecular interactions at the solid-liquid interface would be a beneficial capability. Using scanning tunneling microscopy at the 1,2,4-trichlorobenzene/Au(111) interface, we observed selective self-assembly of 1,3,5-tris(4-methoxyphenyl)benzene (TMPB) molecules in the face-centered cubic (FCC) regions of Au(111). Density functional theory calculations suggest higher adsorption energy of TMPB molecules at FCC regions, explaining the preference for self-assembly. The molecular coverage is found to increase with the concentration of the applied solution, eventually yielding a full monolayer. Moreover, the adsorption of TMPB molecules induces a concentration-dependent lifting of the herringbone reconstruction, observed as an increase in the area of the FCC regions at higher concentrations. Our results represent a simple and cost-effective selective nanoscale patterning method on Au(111), providing a possible avenue to guide the co-adsorption of other functional molecules.
ABSTRACT
With the aim of constructing efficient photoelectric organic materials, a pyrido[3,2-g]quinoline derivative named LA17b has been synthesized, and its photodynamic relaxation processes in solvents and films were studied by time-resolved fluorescence and femtosecond transient absorption techniques. The steady-state fluorescence spectra show pronounced red-shift with the increase of the solvent polarity as well as in binary solvent hexane/ethanol by increasing ethanol concentration. However, the strong red-shift does not lead to quenching of the fluorescence. This is explained in terms of a twisted intramolecular charge transfer (TICT) state. The TICT state of LA17b in ethanol is highly emissive with a long fluorescence lifetime: 1.1 ns. TICT state was shown to play an important role in enhancement of intersystem crossing rate. TD-DFT calculations confirm the pathways of relaxation of locally excited state via TICT and triplet states. In films, the photodynamic properties are similar to that of LA17b in hexane and the TICT state vanishes due to the rigid environment. The obtained optical properties of this molecule suggest that it can be a promising candidate for various optoelectronic applications.
Subject(s)
Ethanol , Density Functional Theory , Solvents , Spectrometry, FluorescenceABSTRACT
There has been a huge amount of interest in perovskites recently and new structures of hybrid perovskites are frequently reported. The classification of perovskites has been unambiguous in the discussion of 3D and layered 2D perovskites due to the dimensional constraints. However, in 1D perovskites, the additional degrees of freedom have resulted in a large number of possible structural configurations. The new proposed notation aims to classify these structures based on the connectivity of the octahedra of the perovskite, which has a periodic repeating pattern. However, the notation should be restricted to simple 1D perovskites and haloplumbate structures as the notation would become too cumbersome when applied to an exotic framework which has 3D characteristics, such as perovskite polytypes.
ABSTRACT
The addition of amphiphilic triethylene glycol based corannulene molecules provides multiple Lewis basic sites that assist in perovskite grain growth, and improve the charge carrier collection and moisture resistance of perovskite solar cells. This study paves the way for utilization of more molecules from corannulene families in perovskite research.
ABSTRACT
The conductivity and open-circuit voltage (OCV) of lithium-solvated electron solutions (LiSESs) based on anthracene in tetrahydrofuran were studied by both experimental measurements and density functional theory calculations with a range-separated functional based on the M06 form and the Solvation Model based on Density (SMD). The OCV was found to decrease with increasing temperature and the ratio of lithium to anthracene. The enthalpy change (ΔH) of LiSESs was the internal energy change of the cell reaction. The conductivity of LiSESs exhibited a weakly metallic-like behavior. The electron transport was facilitated by molecular collisions promoted by the formation of dimeric structures as intermediates. The conductivity of LiSESs at 295.15 K presents positive correlation with the entropy change (ΔS) associated with the variation in the ratio of lithium to poly-aromatic hydrocarbon, including p-terphenyl, anthracene, and triphenylene.
ABSTRACT
A route to the synthesis of novel 5,7-diazapentacenes and some preliminary studies on their properties is reported. A single crystal X-ray diffraction study of the dihexyl derivative showed it had formed a dimer during the analysis. The materials possess lower lying frontier orbitals than pentacene and may have potential applications in organic electronic devices. This synthetic method may be applicable to the synthesis of other azaacenes.
ABSTRACT
We demonstrate a new refuelable lithium cell using lithium solvated electron solution (Li-SES) as anolyte and iodine solutions as catholyte. This cell shows a high OCV (~3 V). Unlike conventional rechargeable Li batteries, this kind of cell can be re-fueled in several minutes by replacing the spent liquids. We also show for the first time, that Li-SES/I2 cells which operate at room temperature, can be prepared in a fully discharged state (~0 V OCV) for safe handling, transportation and storage. Li-SES and iodine are then electrochemically generated during charge as is confirmed by UV-VIS and a qualitative test. We have also conducted proof-of-concept tests for an "indirect lithium-air" cell in which iodine is reduced at the cathode and subsequently is catalytically re-oxidized by oxygen dissolved in the catholyte.
ABSTRACT
The authors report on conductivity studies carried out on lithium solvated electron solutions (LiSES) prepared using two types of polyaromatic hydrocarbons (PAH), namely 1,3,5-triphenylbenzene and corannulene, as electron receptors. The solid PAHs were first dissolved in tetrahydrofuran (THF) to form a solution. Metallic lithium was then dissolved into these PAH/THF solutions to yield either blue or greenish blue solutions, colors which are indicative of the presence of solvated electrons. Conductivity measurements at ambient temperature carried out on 1,3,5-triphenylbenzene-based LiSES, denoted by LixTPB(THF)24.7 (x = 1, 2, 3, 4), showed an increase of conductivity with increase of Li:PAH ratio from x = 1 to 2. However, the conductivity gradually decreased upon further increasing the ratio. Indeed the conductivity of LixTPB(THF)24.7 for x = 4 is even lower than for x = 1. Such behavior is similar to that of the previously reported LiSES prepared from biphenyl and naphthalene. Conductivity versus temperature measurements on corannulene-based LiSES, denoted by LixCor(THF)247 (x = 1, 2, 3, 4, 5), showed linear relationships with negative slopes, indicating a metallic behavior similar to biphenyl and naphthalene-based LiSES.
Subject(s)
Benzene Derivatives , Electrons , LithiumABSTRACT
A novel hole-transporting molecule (F101) based on a furan core has been synthesized by means of a short, high-yielding route. When used as the hole-transporting material (HTM) in mesoporous methylammonium lead halide perovskite solar cells (PSCs) it produced better device performance than the current state-of-the-art HTM 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD). The F101-HTM-based device exhibited both slightly higher Jsc (19.63 vs. 18.41â mA cm(-2) ) and Voc (1.1 vs. 1.05â V) resulting in a marginally higher power conversion efficiency (PCE) (13.1 vs. 13 %). The steady-state and time-resolved photoluminescence show that F101 has significant charge extraction ability. The simple molecular structure, short synthesis route with high yield and better performance in devices makes F101 an excellent candidate for replacing the expensive spiro-OMeTAD as HTM in PSCs.
ABSTRACT
Solar cells based on organic-inorganic lead iodide perovskite (CH3NH3PbI3) exhibit remarkably high power conversion efficiency (PCE). One of the key issues in solution-processed films is that often the polycrystalline domain orientation is not well-defined, which makes it difficult to predict energy alignment and charge transfer efficiency. Here we combine ab initio calculations and photoelectron spectroscopy to unravel the electronic structure and charge redistribution at the interface between different surfaces of CH3NH3PbI3 and typical organic hole acceptor Spiro-OMeTAD and electron acceptor PCBM. We find that both hole and electron interfacial transfer depend strongly on the CH3NH3PbI3 surface orientation: while the (001) and (110) surfaces tend to favor hole injection to Spiro-OMeTAD, the (100) surface facilitates electron transfer to PCBM due to surface delocalized charges and hole/electron accumulation at the CH3NH3PbI3/organic interfaces. Molecular dynamic simulations indicate that this is due to strong orbital interactions under thermal fluctuations at room temperature, suggesting the possibility to further improve charge separation and extraction in perovskite-based solar cells by controlling perovskite film crystallization and surface orientation.
ABSTRACT
A novel BN-fused coronene derivative 1,5,9-triaza-2,6,10-triphenylboracoronene (1) has been successfully synthesized in one step from 2,3,6,7,9,10-hexamethoxy-1,5,9-triamino-triphenylene. Compound 1 has been investigated using photophysical, electrochemical, and molecular simulation methods. Interestingly, three phenyl groups at B centers in compound 1 can be replaced by hydroxyl units stepwise through hydroxylation in wet organic solvents, leading to changes in the packing and physical properties.
ABSTRACT
A series of aryl-substituted fullerene derivatives were prepared in which the aromatic moiety of [6,6]-phenyl C61-butyric acid methyl ester (PC61BM) was modified by replacing the monocyclic phenyl ring with bicyclic naphthalene (NC61BM), tricyclic anthracene (AC61BM), and tetracyclic pyrene (PyC61BM). The PC61BM derivatives were synthesized from C60 using tosylhydrazone and were tested as electron acceptors in poly(3-hexylthiophene) (P3HT)-based organic photovoltaic cells (OPVs). The lowest unoccupied molecular orbital (LUMO) energy level of NC61BM (-3.68 eV) was found to be slightly higher than those of PC61BM (-3.70 eV), AC61BM (-3.75 eV), and PyC61BM (-3.72 eV). The electron mobility values obtained for the P3HT:PC61BM, P3HT:NC61BM, P3HT:AC61BM, and P3HT:PyC61BM blend films were 2.39 × 10(-4), 2.27 × 10(-4), 1.75 × 10(-4), and 2.13 × 10(-4) cm(2) V(-1) s(-1), respectively. P3HT-based bulk-heterojunction (BHJ) solar cells were fabricated using NC61BM, AC61BM, and PyC61BM as electron acceptors, and their performances were compared with that of the device fabricated using PC61BM. The highest power conversion efficiencies (PCEs) observed for devices fabricated with PC61BM, NC61BM, AC61BM, and PyC61BM were 3.80, 4.09, 1.14, and 1.95%, respectively, suggesting NC61BM as a promising electron acceptor for OPVs.
ABSTRACT
A series of six structurally correlated donor-π bridge-acceptor organic dyes were designed, synthesized, and applied as sensitizers in dye-sensitized solar cells. Using the most widely studied donor (triarylamine) and cyclopenta[1,2-b:5,4-b']dithiophene or cyclopenta[1,2-b:5,4-b']dithiophene[2',1':4,5]thieno[2,3-d]thiophene as π spacers, their structure-property relationships were investigated in depth by photophysical techniques and theoretical calculations. It was found that the photovoltaic performance of these dyes largely depends on their electronic structures, which requires synergistic interaction between donors and acceptors. Increasing the electron richness of the donor or the elongation of π-conjugated bridges does not necessarily lead to higher performance. Rather, it is essential to rationally design the dyes by balancing their light-harvesting capability with achieving suitable energy levels to guarantee unimpeded charge separation and transport.
Subject(s)
Coloring Agents/chemistry , Organic Chemicals/chemistry , Structure-Activity RelationshipABSTRACT
Due to their inherently dynamic natures and fascinating photoluminescent/photoelectronic properties, coordination compounds of metal ions and conjugated terpyridine ligands have attracted considerable attention as functional materials for a variety of potential applications. In this feature article, a summary of recent work toward the development of one- (1D), two- (2D), and three-dimensional (3D) supramolecular polymers, networks, and metallomacrocycles based on zinc metal ion coordination of conjugated units bearing terpyridine ligands is presented, and it is shown how it fits within the overall framework of work in this field. Here, a sequential study from terpyridines as basic building blocks to their zinc-coordinated supramolecular 1D polymers, 2D macrocycles, and 2D and 3D networks is developed. These networks are compared with respect to their thermal stabilities, molecular organization, and linear and nonlinear optical properties. This work opens new prospects for the development of supramolecular chemistry of terpyridines and other transition metal ions, and also their application in future optoelectronic devices.
ABSTRACT
Two new electron-rich molecules, 2,3,4,5-tetra[4,4'-bis(methoxyphenyl)aminophen-4"-yl]-thiophene (H111) and 4,4',5,5'-tetra[4,4'-bis(methoxyphenyl)aminophen-4"-yl]-2,2'-bithiophene (H112), which contain thiophene cores with arylamine side groups, are reported. When used as the hole-transporting material (HTM) in perovskite-based solar cell devices, power conversion efficiencies of up to 15.4% under AMâ 1.5G solar simulation were obtained. This is the highest efficiency achieved with HTMs not composed of 2,2',7,7'-tetrakis(N,N'-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD) and its isomers. Both HTMs, especially H111, have great potential to replace expensive spiro-OMeTAD given their much simpler and less expensive syntheses.
Subject(s)
Calcium Compounds/chemistry , Electric Power Supplies , Oxides/chemistry , Sunlight , Thiophenes/chemistry , Titanium/chemistry , Calorimetry, Differential Scanning , Dielectric Spectroscopy , Magnetic Resonance Spectroscopy , Spectrometry, Mass, Matrix-Assisted Laser Desorption-IonizationABSTRACT
In this work, we report a new cobalt(III) complex, tris[2-(1H-pyrazol-1-yl)pyrimidine]cobalt(III) tris[bis(trifluoromethylsulfonyl)imide] (MY11), with deep redox potential (1.27 V vs NHE) as dopant for 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD). This dopant possesses, to the best of our knowledge, the deepest redox potential among all cobalt-based dopants used in solar cell applications, allowing it to dope a wide range of hole-conductors. We demonstrate the tuning of redox potential of the Co dopant by incorporating pyrimidine moiety in the ligand. We characterize the optical and electrochemical properties of the newly synthesized dopant and show impressive spiro-to-spiro(+) conversion. Lastly, we fabricate high efficiency perovskite-based solar cells using MY11 as dopant for molecular hole-conductor, spiro-OMeTAD, to reveal the impact of this dopant in photovoltaic performance. An overall power conversion efficiency of 12% is achieved using MY11 as p-type dopant to spiro-OMeTAD.
Subject(s)
Cobalt/chemistry , Coordination Complexes/chemistry , Electric Power Supplies , Halogens/chemistry , Organometallic Compounds/chemistry , Solar Energy , Electrochemistry , Oxidation-ReductionABSTRACT
We report a novel electron-rich molecule based on 3,4-ethylenedioxythiophene (H101). When used as the hole-transporting layer in a perovskite-based solar cell, the power-conversion efficiency reached 13.8 % under AM 1.5G solar simulation. This result is comparable with that obtained using the well-known hole transporting material 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9'-spirobifluorene (spiro-OMeTAD). This is the first heterocycle-containing material achieving >10 % efficiency in such devices, and has great potential to replace the expensive spiro-OMeTAD given its much simpler and cheaper synthesis.
ABSTRACT
We have found that 9,9'BF can be used as an electron acceptor for P3HT-based OPVs while similar devices using 4,4'BP do not show any photovoltaic effect. This can be related to the respective aromaticity and antiaromaticity of the reduced forms of 9,9'BF or 4,4'BP. The OPV device fabricated using P3HT and 9,9'BF exhibited a PCE of 2.28% with a V(oc) of 1.07 V, a J(sc) of 5.04 mA cm(-2), and a FF of 0.42.
ABSTRACT
Two cyanobiphenyl liquid crystals (LCs), 5CB (4-cyano-4'-pentylbiphenyl) and 8CB (4-cyano-4'-octylbiphenyl), are introduced as additives into Co(II/III) electrolytes for dye-sensitized solar cells (DSCs). An electrolyte containing a combination of these LCs and 4-tert-butylpyridine (TBP) exhibits higher photovoltage than one with only TBP, resulting in higher power conversion efficiency.
ABSTRACT
Two new D-π-A sensitizers (L101 and L102) incorporating 5H-[1,2,5]thiadiazolo [3,4-f]isoindole-5,7(6H)-dione and 6H-pyrrolo[3,4-g]quinoxaline-6,8(7H)-dione core structures were synthesized and tested in liquid dye-sensitized solar cells (DSCs). L102 achieved a promising power conversion efficiency (PCE) of 6.2% (AM 1.5, 100 mW cm(-2)).