Risk factors or indicators for dental caries and tooth wear and their relative importance in adults according to age.

OBJECTIVES: To explore the risk factors for dental caries (DC) and tooth wear (TW) and assess their importance according to age in random French adult patients with >1 partial coronal restoration. METHODS: The data stem from a prospective observational multicentre cross-sectional study and were collected through interviews and clinical examinations. The study involved 96 dentists from 76 hospital and private clinics and included 822 patients. The data analysed in three age groups (18-29, 30-59, and ≥ 60). Univariate logistic regressions were performed and predictions of DC or TW described using decision trees. RESULTS: The study confirmed the major influences of oral hygiene, acceptable sugary/acidic beverage consumption and regular dental visits in reducing DC and TW. Further, it exposed age-related risk factors for DC such being a "new patient" and having an "excessive sugary/acidic beverage consumption" in the youngest adults, or "irregular dental visits" in middle-aged adults and in the oldest. CONCLUSIONS: For appropriate preventive counselling, risk factor assessment should be extensive and age- and dental history-oriented because of unexpected age-related risk factors or risk factor combinations. CLINICAL SIGNIFICANCE: These results are likely to make better-grounded new recommendations given to young adults since their first visits and throughout their dental clinical pathway.

Development of Chlorhexidine-loaded Lipid Nanoparticles Incorporated in a Bioceramic Endodontic Sealer.

INTRODUCTION: This study aimed to assess BioRoot RCS (BR) incorporating liposomal chlorhexidine digluconate (CHX) for its antibacterial activity, drug release capacity, and physicochemical properties. METHODS: Drug release of CHX liposomal formulations in combination with BR was evaluated spectrophotometrically and through mathematical release models for 30 days. A selected combination was evaluated for antimicrobial properties against Enterococcus faecalis biofilm growth on human dentin. Cytotoxicity was assessed following the ISO 10993-5:2019 standard on days 1, 3, and 7. Physicochemical properties were evaluated through setting time, Fourier transform infrared spectroscopy, solubility, contact angle, and film thickness. RESULTS: From BR, liposomal CHX released up to 7-fold higher CHX than CHX solution (P < .05), following a triphasic drug release pattern compared to the CHX solution, which followed a quasi-Fickian diffusion. BR combined with a selected liposomal CHX completely inhibited E. faecalis biofilm growth compared to the combination of BR with CHX solution and the control group (P < .05). Liposomal CHX decreased the contact angle (P < .05) and solubility but increased cytotoxicity (P < .05) of BR, staying above the ISO threshold. None of the other physicochemical characteristics tested differed from BR (P > .05). CONCLUSION: This liposomal formulation improved CHX release from BR, enhancing the antibacterial effectiveness. It presents a promising approach for local antibiofilm therapy in endodontics without substantially altering the physicochemical characteristics of BR.

SARS-CoV-2 infection prevalence and associated factors among primary healthcare workers in France after the third COVID-19 wave.

Data on the SARS-CoV-2 infection among primary health care workers (PHCWs) are scarce but essential to reflect on policy regarding prevention and control measures. We assessed the prevalence of PHCWs who have been infected by SARS-CoV-2 in comparison with modeling from the general population in metropolitan France, and associated factors. A cross-sectional study was conducted among general practitioners (GPs), pediatricians, dental and pharmacy workers in primary care between May and August 2021. Participants volunteered to provide a dried-blood spot for SARS-CoV-2 antibody assessment and completed a questionnaire. The primary outcome was defined as the detection of infection-induced antibodies (anti-nucleocapsid IgG, and for non-vaccinees: anti-Spike IgG and neutralizing antibodies) or previous self-reported infection (positive RT-qPCR or antigenic test, or positive ELISA test before vaccination). Estimates were adjusted using weights for representativeness and compared with prediction from the general population. Poisson regressions were used to quantify associated factors. The analysis included 1612 PHCWs. Weighted prevalences were: 31.7% (95% CI 27.5-36.0) for GPs, 28.7% (95% CI 24.4-33.0) for pediatricians, 25.2% (95% CI 20.6-31.0) for dentists, and 25.5% (95% CI 18.2-34.0) for pharmacists. Estimates were compatible with model predictions for the general population. PHCWs more likely to be infected were: GPs compared to pharmacist assistants (adjusted prevalence ratio [aPR] = 2.26; CI 95% 1.01-5.07), those living in Île-de-France (aPR = 1.53; CI 95% 1.14-2.05), South-East (aPR = 1.57; CI 95% 1.19-2.08), North-East (aPR = 1.81; CI 95% 1.38-2.37), and those having an unprotected contact with a COVID-19 case within the household (aPR = 1.48; CI 95% 1.22-1.80). Occupational factors were not associated with infection. In conclusion, the risk of SARS-CoV-2 exposure for PHCWs was more likely to have occurred in the community rather than at their workplace.

[Biomimetic approach to dental tissue restorations: Which biomaterials, which prospects?] / Approche biomimétique des restaurations des tissus dentaires - Quels biomatériaux, quelles perspectives ?

Title: Approche biomimétique des restaurations des tissus dentaires - Quels biomatériaux, quelles perspectives ? Abstract: Les dents constituent un organe particulier. Elles permettent la fonction masticatrice, participent à la phonation et ont un rôle important dans les relations sociales. Elles doivent résister à des variations de température, comprises entre 5 °C et 55 °C, aux contraintes mécaniques de la mastication, et aux acides présents dans l'alimentation.

Exploring the methodological approaches of studies on radiographic databases used in cariology to feed AI: A Systematic Review.

INTRODUCTION: A growing number of studies on diagnostic imaging show superior efficiency and accuracy of computer-aided diagnostic systems compared to certified dentists. This methodological systematic review aims to evaluate the different methodological approaches used by studies focusing on machine learning and deep learning and that have used radiographic databases to classify, detect, and segment dental caries. METHODS: The protocol was registered in PROSPERO before data collection (CRD42022348097). Literature research was performed in MEDLINE, Embase, IEEE Xplore, and Web of Science until December 2022, without language restrictions. Studies and surveys using a dental radiographic database for the classification, detection, or segmentation of carious lesions were sought. Records deemed eligible were retrieved and further assessed for inclusion by two reviewers who resolved any discrepancies through consensus. A third reviewer was consulted when any disagreements or discrepancies persist between the two reviewers. After data extraction, the same reviewers assessed the methodological quality using the CLAIM and QUADAS-AI checklists. RESULTS: After screening 325 articles, 35 studies were eligible and included. The bitewing was the most commonly used radiograph (n=17) at the time when detection (n=15) was the most explored computer vision task. The sample sizes used ranged from 95 to 38437, while the augmented training set ranged from 300 to 315786. Convolutional neural network (CNN) was the most commonly used model. The mean completeness of CLAIM items was 49 % (SD ± 34%). The applicability of the CLAIM checklist items revealed several weaknesses in the methodology of the selected studies: most of the studies were monocentric, and only 9% of them used an external test set when evaluating the model's performance. The QUADAS-AI tool revealed that only 43% of the studies included in this systematic review were at low risk of bias concerning the standard reference domain. CONCLUSION: This review demonstrates that the overall scientific quality of studies conducted to feed AI algorithms is low. Some improvement in the design and validation of studies can be made with the development of a standardized guideline for the reproducibility and generalizability of results and, thus, their clinical applications.

A Multicenter Cohort Study on 301 Tissue-Level Implants: Cumulative Implant Survival Rate and Marginal Bone Level Change up to 4.5 Years.

PURPOSE: To retrospectively determine the cumulative survival rate (CSR) and marginal bone level change (ΔMBL) around novel hybrid design tissue-level (TL) dental implants that support multiple-screw-retained restorations. MATERIALS AND METHODS: Implant CSRs were analyzed at the implant and patient level using Kaplan-Meier estimates. ΔMBL was measured by comparing the periapical loading and follow-up visit radiographs using an improved standardized digital methodology based on image gray levels. ΔMBL outcomes were subject to linear mixed regression to identify potential risk factors. RESULTS: A total of 301 TL implants in 69 patients with an average age of 62.6 ± 11.7 years (range: 36 to 87 years) at the time of implant placement were considered for the analysis. All 301 implants were successfully restored and loaded. The 54-month CSRs at the implant and patient levels were 98.9% (95% CI: 96.7 to 99.6) and 95.3% (95% CI: 86.1 to 98.5), respectively. ΔMBL after a mean follow-up of 22 ± 10.7 months after loading was 0.00 ± 0.57 mm. None of the implant sites showed marginal bone loss exceeding 1.5 mm. Multivariate regression analysis revealed a significant association between ΔMBL and the loading protocol (P = .027) but not between ΔMBL and age or transgingival height. CONCLUSIONS: The high CSRs and stable peri-implant marginal bone levels support the use of recent TL implants, which have a hybrid design inherited from the bone-level implant-abutment connection, as a suitable treatment option for restoring partially or fully edentulous patients with a good mid-term prognosis. These results should be complemented by further prospective studies in a real-world multicenter private practice setup that represents the daily realities of implant treatment.

Comparative study of two bioactive dental materials.

OBJECTIVES: New bioactive materials were introduced to not only restore the lost dental hard tissue but also to release fluoride that inhibits demineralization and occurrence of secondary caries. The current study thus aims to assess Fluoride release as well as the mechanical and physical properties of two new commercially available bioactive restorative materials. METHODS: Two materials, Cention® Forte (CF) (Ivoclar Vivadent), Surefil one™ (SO) (Denstply Sirona), were evaluated in terms of fracture toughness (FT), flexural strength (FS), flexural modulus (FM) (ISO 4049), compressive strength (CS), and Vickers hardness (VH). In addition, thermogravimetric analysis (TGA) was performed, as well as pH measurements and quantification of Fluoride release after immersion in distilled water at times of 0, 7, 14 and 21 days. The sealing ability was evaluated using silver nitrate dye penetration on natural teeth. Finally, Energy-Dispersive X-Ray Spectroscopy (EDX) was used to investigate the surface composition of the two studied material surfaces. The data were statistically analyzed using Independent T-Tests; the chosen significance level was α = 0.05. RESULTS: CF had significantly higher FT values compared to SO (p = 0.001). Also the FS results showed that CF had significantly higher values (90.11 MPa), followed by SO (22.15 MPa). The CS values showed the same order with significantly higher values for CF (231.79 MPa). While the FM and VH showed the reverse order with SO having significantly higher values than CF. pH measurements showed that CF evolved towards significantly higher pH values after 3 weeks in distilled water, while thermal properties showed more stability and higher resistance to degradation for CF compared to SO. The silver nitrate penetration results showed significantly better sealing ability for CF compared to the self-adhesive SO. Finally, EDX surface analysis results were consistent with the release profiles and confirmed the composition of the two tested materials. SIGNIFICANCE: Both materials, demonstrated enhanced Fluoride release ability, and hence good remineralisation potential in vitro that could prevent recurrent carious lesions in vivo. The composition based on acrylic polymerization showed better mechanical resistance to bending and fracture, and higher sealing ability than those based on acid base reaction.

Therapeutic Potential of Chlorhexidine-Loaded Calcium Hydroxide-Based Intracanal Medications in Endo-Periodontal Lesions: An Ex Vivo and In Vitro Study.

Endo-periodontal lesions are challenging clinical situations where both the supporting tissues and the root canal of the same tooth are infected. In the present study, chlorhexidine (CHX)-loaded calcium hydroxide (CH) pastes were used as intracanal medications (ICMs). They were prepared and tested on pathogens found in both the root canal and the periodontal pocket. Exposure to 0.5% and 1% CHX-loaded ICMs decreased the growth of Porphyromonas gingivalis and was effective in eradicating or inhibiting an Enterococcus faecalis biofilm. CH was injected into the root canal of extracted human teeth immersed in deionized water. CHX-loaded ICMs resulted in the transradicular diffusion of active components outside the tooth through the apex and the lateral dentinal tubules, as shown by the release of CHX (from 3.99 µg/mL to 51.28 µg/mL) and changes in pH (from 6.63 to 8.18) and calcium concentrations (from 2.42 ppm to 14.67 ppm) after 7 days. The 0.5% CHX-loaded ICM was non-toxic and reduced the release of IL-6 by periodontal cells stimulated by P. gingivalis lipopolysaccharides. Results indicate that the root canal may serve as a reservoir for periodontal drug delivery and that CHX-based ICMs can be an adjuvant for the control of infections and inflammation in endo-periodontal lesions.

Patients´ satisfaction concerning direct anterior dental restoration.

The objective of this study was to observe patients' satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored their own anterior dental restorations regarding satisfaction (satisfactory /dissatisfactory). If dissatisfaction was mentioned, then, they would be interviewed about the complaint. In the same session, the dental restorations were clinically evaluated by two dentists using FDI criteria (1-5 score) concerning esthetic, functional, and biological domains. Descriptive statistics were used for frequencies of scores attributed by patients and clinicians. In order to compare patients' to clinicians' frequencies, the Chi-square test was applied (p ≤ 0.05). A total of 106 restorations were evaluated by patients and clinicians. Patients reported 52.8% of restorations satisfactory and 47.8% dissatisfactory. Overall, clinicians reported the same restorations as 82,3% satisfactory and 17,6% dissatisfactory. Patients' most frequent complaints referred to color, followed by anatomical form, fracture of material and retention, and approximal anatomical form. Comparing patients' satisfaction and dissatisfaction rates to clinicians' evaluation per criteria, there was no difference regarding esthetics. The frequency of dissatisfactory restorations by clinicians was significantly lower when functional and biological properties were compared with patients' opinions. Direct anterior dental restorations were more frequently reported as satisfactory by patients and clinicians, being the main complaints related to esthetic issues. When clinicians and patients' evaluations were compared, it was observed that the frequencies of satisfactory restoration by patients and clinicians were similar regarding esthetic properties, and significantly different regarding functional and biological properties.

Patients´ satisfaction concerning direct anterior dental restoration

Abstract The objective of this study was to observe patients' satisfaction with their in-service direct anterior dental restorations and to compare it with clinical evaluation using FDI (Federation Dental International) criteria. Patients scored their own anterior dental restorations regarding satisfaction (satisfactory /dissatisfactory). If dissatisfaction was mentioned, then, they would be interviewed about the complaint. In the same session, the dental restorations were clinically evaluated by two dentists using FDI criteria (1-5 score) concerning esthetic, functional, and biological domains. Descriptive statistics were used for frequencies of scores attributed by patients and clinicians. In order to compare patients' to clinicians' frequencies, the Chi-square test was applied (p ≤ 0.05). A total of 106 restorations were evaluated by patients and clinicians. Patients reported 52.8% of restorations satisfactory and 47.8% dissatisfactory. Overall, clinicians reported the same restorations as 82,3% satisfactory and 17,6% dissatisfactory. Patients' most frequent complaints referred to color, followed by anatomical form, fracture of material and retention, and approximal anatomical form. Comparing patients' satisfaction and dissatisfaction rates to clinicians' evaluation per criteria, there was no difference regarding esthetics. The frequency of dissatisfactory restorations by clinicians was significantly lower when functional and biological properties were compared with patients' opinions. Direct anterior dental restorations were more frequently reported as satisfactory by patients and clinicians, being the main complaints related to esthetic issues. When clinicians and patients' evaluations were compared, it was observed that the frequencies of satisfactory restoration by patients and clinicians were similar regarding esthetic properties, and significantly different regarding functional and biological properties.

Resumo O objetivo deste estudo foi observar a satisfação dos pacientes com suas restaurações dentárias anteriores diretas e compará-las com a avaliação clínica do dentista usando os critérios FDI (Federation Dental International). Os pacientes pontuaram suas restaurações dentárias (n=106) anteriores em relação à satisfação (satisfatória / insatisfatória). Quando insatisfatória, ele foi entrevistado sobre a queixa. Na mesma sessão, as restaurações dentárias foram avaliadas clinicamente por dois dentistas utilizando os critérios FDI (escore 1-5) quanto aos aspectos estéticos, funcionais e biológicos. Estatística descritiva foi usada para frequências de escores atribuídos por pacientes e clínicos. Para comparar as frequências dos pacientes e dos clínicos, foi aplicado o teste Qui-quadrado (p ≤ 0,05). Os pacientes relataram suas restaurações como 52,8% satisfatórias e 47,8% insatisfatórias. Os clínicos reportaram as mesmas restaurações, 82,3% satisfatória e 17,6% insatisfatória. As queixas mais frequentes dos pacientes referiam-se à cor, seguida da forma anatômica, fratura e retenção do material e forma anatômica proximal. Comparando os índices de satisfação e insatisfação dos pacientes com os clínicos, não houve diferença em relação à estética. A frequência de restaurações insatisfatórias por dentistas foi significativamente menor quando as propriedades funcionais e biológicas foram comparadas com as opiniões dos pacientes. As restaurações foram mais frequentemente relatadas como satisfatórias pelos pacientes, sendo as principais queixas relacionadas a questões estéticas. Quando as avaliações dos clínicos e dos pacientes foram comparadas, observou-se que as frequências de restaurações satisfatórias por pacientes e clínicos foram semelhantes em relação às propriedades estéticas e significativamente diferentes em relação às propriedades funcionais e biológicas.

3D Electrospun Polycaprolactone Scaffolds to Assess Human Periodontal Ligament Cells Mechanobiological Behaviour.

While periodontal ligament cells are sensitive to their 3D biomechanical environment, only a few 3D in vitro models have been used to investigate the periodontal cells mechanobiological behavior. The objective of the current study was to assess the capability of a 3D fibrous scaffold to transmit a mechanical loading to the periodontal ligament cells. Three-dimensional fibrous polycaprolactone (PCL) scaffolds were synthetized through electrospinning. Scaffolds seeded with human periodontal cells (103 mL-1) were subjected to static (n = 9) or to a sinusoidal axial compressive loading in an in-house bioreactor (n = 9). At the end of the culture, the dynamic loading seemed to have an influence on the cells' morphology, with a lower number of visible cells on the scaffolds surface and a lower expression of actin filament. Furthermore, the dynamic loading presented a tendency to decrease the Alkaline Phosphatase activity and the production of Interleukin-6 while these two biomolecular markers were increased after 21 days of static culture. Together, these results showed that load transmission is occurring in the 3D electrospun PCL fibrous scaffolds, suggesting that it can be used to better understand the periodontal ligament cells mechanobiology. The current study shows a relevant way to investigate periodontal mechanobiology using 3D fibrous scaffolds.

Amelogenin-Derived Peptide (ADP-5) Hydrogel for Periodontal Regeneration: An In Vitro Study on Periodontal Cells Cytocompatibility, Remineralization and Inflammatory Profile.

A relevant alternative to enamel matrix derivatives from animal origin could be the use of synthetic amelogenin-derived peptides. This study aimed to assess the effect of a synthetic amelogenin-derived peptide (ADP-5), alone or included in an experimental gellan-xanthan hydrogel, on periodontal cell behavior (gingival fibroblasts, periodontal ligament cells, osteoblasts and cementoblasts). The effect of ADP-5 (50, 100, and 200 µg/mL) on cell metabolic activity was examined using Alamar blue assay, and cell morphology was assessed by confocal imaging. An experimental gellan-xanthan hydrogel was then designed as carrier for ADP-5 and compared to the commercial gel Emdogain®. Alizarin Red was used to determine the periodontal ligament and cementoblasts cell mineralization. The inflammatory profile of these two cells was also quantified using ELISA (vascular endothelial growth factor A, tumor necrosis factor α, and interleukin 11) mediators. ADP-5 enhanced cell proliferation and remineralization; the 100 µg/mL concentration was more efficient than 50 and 200 µg/mL. The ADP-5 experimental hydrogel exhibited equivalent good biological behavior compared to Emdogain® in terms of cell colonization, mineralization, and inflammatory profile. These findings revealed relevant insights regarding the ADP-5 biological behavior. From a clinical perspective, these outcomes could instigate the development of novel functionalized scaffold for periodontal regeneration.

Experimental Investigation of Dental Composites Degradation After Early Water Exposure.

While dental composite long-term aging has already been studied in the past, no data exist about the early aging while it might be detrimental regarding the composites' longevity. This study aims to better understand the effects of early water exposure on dental composites. Dental resin composites with different fillers ratio were subjected to water exposure during 24 h, 1 week, or 1 month. After photopolymerization, the samples were stored at different conditions, whether in wet or dry condition (W, D, respectively) and in wet conditions after a first 24 h storage in dry conditions (DW). Three-point bending tests were performed to measure the flexural modulus. The samples were then subjected to a sorption/desorption protocol. While the matrix alone did not undergo any mechanical degradation with exposure time, the composites matrices presented a decrease in elastic modulus. This decrease was the highest for the matrix with nonsilanized fillers. Interestingly, the DW condition was detrimental for all the samples. Regarding the sample with nonsilanized fillers in DW for 1 month presented an elastic modulus lower than the matrix alone. These results were assigned to the sorption capacity of the polymer matrix, suggesting that the diffusion mechanisms and the nature of water molecules are determinant in the composite degradation. This study showed that dental composite early degradation mechanisms after water exposure are involved in the polymer matrix postpolymerization process as soon as after 24 h. Such mechanisms are detrimental in terms of the dental composite efficiency and have to be understood.

Comparison of the Biological Behavior and Topographical Surface Assessment of a Minimally Invasive Dental Implant and a Standard Implant: An In Vitro Study.

The current study aimed to assess the topographical and physical properties of a minimally invasive implant (MagiCore®: MC®, InnosBioSurg, IBS) and to evaluate its biological behavior compared to a gold standard implant (NobelParallel™: NB™, Nobel Biocare™). After surface characterization, the biological behavior assessment was conducted regarding human gingival fibroblasts (hGF) and osteoblast-like cells (MG63). Roughness values for NBTM were Ra = 1.28 µm and for MC® they were Ra = 2.02 µm. Alamar BlueTM assay LIVE/DEADTM staining results indicated equivalent biological development regarding both cell types for the two implants. Significant enhancement was found for hGF ALP activity in the presence of the two tested implants in a time-dependent manner from day 7 to day 14 (** p < 0.01). Alizarin red staining demonstrated significant calcium deposition enhancement when cells were interfaced with the NB™ compared to the MC® implant (** p < 0.05). Moreover, SEM and confocal imaging revealed good cell adhesion with a denser cellular layer on the MC® than the NB™ surface. The MC® cytocompatibility was ranked as equivalent to the gold standard implant despite the surface properties differences. These findings provide new insights about the minimally invasive implant's biological behavior and its potential clinical implication in different implantology situations.

Toxicological Risks of the Cobalt-Chromium Alloys in Dentistry: A Systematic Review.

Background: The toxicological risk of Co-Cr dental alloys is actually a sensitive subject with the European regulatory changes, namely regulation (EU) 2017/745 and annex VI to the CLP regulation (EC) 1972/2008. Objectives: The objective of this review is to conduct a rigorous analysis of the cytocompatibility of cobalt-chromium (Co-Cr) dental alloys. Considering various parameters such as cytotoxicity, type IV hypersensitivity reaction, sensitization, and irritation, we investigated evidence of toxicity of Co-Cr in human dental applications. Data sources: Specific search strategies were performed in three electronic databases, namely Medline, Embase, and Web of Science, using a main restriction in the search regarding the publication date (1995-2022). Study selection: Out of a total of 836 articles, only 21 studies were selected and analyzed according to PRISMA methodology. Results: Among them, 10 in vitro studies using human samples and 11 in vivo studies on human patients were distinguished. Most of the in vitro studies confirmed that Co-Cr alloys have a good cytocompatibility compared to Ni alloys. Regarding the in vivo studies, it appeared that Co-Cr could rarely cause sensitization, irritation, and allergic reactions. Reactions were mainly observed for people allergic to Co or Cr. Nevertheless, titanium-based materials showed better results. Conclusions: This study proposes a new state of the art on Co-Cr dental alloys and will thus be very useful for carrying out additional studies. Relevance: This review will help practitioners in their daily clinical choice.

How French dentists manage defective restorations: Evidence from ReCOL the French dental practice-based research network--A survey study.

OBJECTIVES: The objective of this study was to describe the knowledge, opinions and practices about the defective restoration (DR) management of French general dental practitioners (GDPs). METHODS: A cross-sectional, online survey-based study was carried out amongst 378 GDPs - members of the dental practice-based research network in France (ReCOL). Bivariate comparisons were made using Fisher's exact test to assess the association of the respondent characteristics (age, gender…) with the decision to repair DRs, and responses to clinical cases. RESULTS: The response rate was 82.9%. 50.4% of the respondents declared they at least sometimes consider DRs repair in their clinical practice instead of DRs total replacement. For the 89.8% who at least rarely repaired DRs, the main characteristic determining the therapeutic strategy was the defect size (71%, mainly inclined to repair small defects), followed by the defect type (marginal defect or crack for more than 60% of the respondents) and the material of initial restoration (composite for 63.5%). When shown clinical photographs illustrating DRs, most of respondents proposed a replacement with inlay/onlay or crown. CONCLUSIONS: This study indicates that a significant proportion of French GDPs do not make sufficient use of DR repair on a routine basis. A lack of knowledge of the concept seems to explain at least part of this situation. Collective and individual efforts from the profession are still needed to promote DR repair and therefore more often apply MinimalIntervention Dentistry. CLINICAL SIGNIFICANCE: This survey shows that MID is not yet sufficiently used in routine practice in France regarding DR management. Further efforts (continuing education toward MID, public funding revaluation for MID strategies…) are needed to help GDPs to implement MID into everyday practice.

Experimental borosilicate bioactive glasses: Pulp cells cytocompatibility and mechanical characterization.

AIM: To assess in vitro the effect of two novel phase separated borosilicate glasses (PSBS) in the system SiO2 -B2 O3 -K2 O-CaO-Al2 O3 on dental pulp cells; and to compare their bioactivity and mechanical properties to a conventional fluoroaluminosilicate glass ionomer cement namely FUJI IX. METHODOLOGY: The cytocompatibility assessment of the two novel borosilicate glasses, one without alumina (PSBS8) and one containing alumina (PSBS16), was performed on cultured primary human pulp cells. Alamar blue assay was used to assess cell metabolic activity and cell morphology was evaluated by confocal imaging. The bioactivity in Stimulated Body Fluid was also evaluated after 1 and 3 weeks of immersion using SEM-EDX analysis. Vickers microhardness and flexural strength were assessed after incorporating the glass particles into a commercial glass ionomer cement (GIC) liquid containing both polyacrylic and polybasic carboxylic acid. RESULTS: The data revealed that the two borosilicate glasses enhanced cell viability ratios at all-time points in both direct and indirect contact assays. After 3 days of contact, PSBS8 without alumina showed higher viability rate (152%) compared to the PSBS16 containing alumina (145%) and the conventional glass ionomer particles (117%). EDX analysis confirmed an initial Ca/P ratio of 2.1 for 45S5K and 2.08 for PSBS8 without alumina after 3 weeks of immersion. The cement prepared using PSBS8 showed significantly higher Vickers hardness values (p = .001) than that prepared using PSBS16 (46.6 vs. 36.7 MPa). After 24 h of maturation, PSBS8 (without alumina) exhibited a flexural strength of 12.9 MPa compared to a value of 16.4 MPa for the commercial control. PSBS8 without alumina had a higher strength than PSBS16 with alumina, after 1 and 7 days of maturation (p = .001). CONCLUSIONS: The present in vitro results demonstrated that the borosilicate bioactive glass without alumina enhanced pulp cell viability, spreading and acellular bioactivity better than the conventional GIC and the experimental borosilicate glass containing alumina.

Seroprevalence of SARS-CoV-2 IgG Antibodies and Factors Associated with SARS-CoV-2 IgG Neutralizing Activity among Primary Health Care Workers 6 Months after Vaccination Rollout in France.

We aimed to investigate the immunoglobulin G response and neutralizing activity against severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) among primary health care workers (PHCW) in France and assess the association between the neutralizing activity and several factors, including the coronavirus disease 2019 (COVID-19) vaccination scheme. A cross-sectional survey was conducted between 10 May 2021 and 31 August 2021. Participants underwent capillary blood sampling and completed a questionnaire. Sera were tested for the presence of antibodies against the nucleocapsid (N) protein and the S-1 portion of the spike (S) protein and neutralizing antibodies. In total, 1612 PHCW were included. The overall seroprevalences were: 23.6% (95% confidence interval (CI) 21.6-25.7%) for antibodies against the N protein, 94.7% (93.6-95.7%) for antibodies against the S protein, and 81.3% (79.4-83.2%) for neutralizing antibodies. Multivariate regression analyses showed that detection of neutralizing antibodies was significantly more likely in PHCW with previous SARS-CoV-2 infection than in those with no such history among the unvaccinated (odds ratio (OR) 16.57, 95% CI 5.96-59.36) and those vaccinated with one vaccine dose (OR 41.66, 95% CI 16.05-120.78). Among PHCW vaccinated with two vaccine doses, the detection of neutralizing antibodies was not significantly associated with previous SARS-CoV-2 infection (OR 1.31, 95% CI 0.86-2.07), but was more likely in those that received their second vaccine dose within the three months before study entry than in those vaccinated more than three months earlier (OR 5.28, 95% CI 3.51-8.23). This study highlights that previous SARS-CoV-2 infection and the time since vaccination should be considered when planning booster doses and the design of COVID-19 vaccine strategies.

The effect of therapeutic radiation on dental enamel and dentin: A systematic review.

OBJECTIVES: The conventional radiotherapy protocol to treat head-and-neck cancer is usually followed by tooth-decay onset. Radiation impact on mineralized tooth structures is not well-understood. This systematic review aimed to collect the recorded effects of therapeutic radiation on tooth chemical, structural and mechanical properties, in relation with their means of investigation. DATA: Systematic search (January 01 2012 - September 30 2021) terms were "Radiotherapy", "Radiation effects", "Dental enamel", "Dentin", "Human" and "Radiotherapy" NOT "Laser". SOURCES: PubMed, DOSS and Embase databases were searched. STUDY SELECTION: Selected studies compared dental enamel, coronal and root dentin properties before and after in vitro or in vivo irradiation up to 80 Gy. RESULTS: The systematic search identified 353 different articles, with 28 satisfying inclusion criteria. Their reference lists provided two more. Twenty-two studies evaluated dental enamel evolution, nine assessed coronal dentin and eight concerned root dentin. Coronal and root dentin results indicate a major impact of the radiation on their organic matrix. Dental enamel's chemical properties are less modified. Enamel and root dentin's hardness are decreased by therapeutic radiation, but no consensus arises for coronal dentin. CONCLUSIONS: Our findings revealed some interesting information about enzymatic degradation mechanisms of dentin organic matrix and highlighted that dental hard-tissue characterization requires highly specific expertise in materials science. That scientific knowledge is necessary to design suitable protocols, adequately analyze the obtained data, and, thus, provide relevant conclusions. CLINICAL SIGNIFICANCE STATEMENT: Better knowledge and understanding of the mechanisms involved in the degradation of enamel and dentin would enable development of new preventive and therapeutic methods for improved medical care of patients undergoing radiotherapy.