Constructing N-Containing Poly(p-Phenylene) (PPP) Films Through A Cathodic-Dehalogenation Polymerization Method.

Developing the films of N-containing unsubstituted poly(p-phenylene) (PPP) films for diverse applications is significant and highly desirable because the replacement of sp2 C atoms with sp2 N atoms will bring novel properties to the as-prepared polymers. In this research, an electrochemical-dehalogenation polymerization strategy is employed to construct two N-containing PPP films under constant potentials, where 2,5-diiodopyridine (DIPy) and 2,5-dibromopyrazine (DBPz) are used as starting agents. The corresponding polymers are named CityU-23 (for polypyridine) and CityU-24 (for polypyrazine). Moreover, it is found that both polymers can form films in situ on different conductive substrates (i.e., silicon, gold, ITO, and nickel), satisfying potential device fabrication. Furthermore, the as-obtained thin films of CityU-23 and CityU-24 exhibit good performance of alkaline hydrogen evolution reaction with the overpotential of 212.8 and 180.7 mV and the Tafel slope of 157.0 and 122.4 mV dec-1, respectively.

A Metal-Free Helical Covalent Inorganic Polymer: Preparation, Crystal Structure and Optical Properties.

Helical morphologies are widely observed in nature, however, it is very challenging to prepare artificial helical polymers. Especially, precisely understanding the structure information of artificial metal-free helical covalent inorganic polymers via single-crystal X-ray diffraction (SCXRD) analysis is rarely explored. Here, we successfully prepare a novel metal-free helical covalent inorganic polymer ({[Te(C6 H5 )2 ] [PO3 (OH)]}n , named CityU-10) by introducing angular anions (HOPO3 2- ) into traditional tellurium-oxygen chains. The dynamic reversibility of the reaction is realized through the introduction of organic tellurium precursor and the slow hydrolysis of polyphosphoric acid. High-quality and large-size single crystals of CityU-10 have been successfully characterized via SCXRD, where the same-handed helical inorganic polymer chains form a pseudo-two-dimensional layer via multiple hydrogen-bonding interactions. The left-handed layers and right-handed layers alternatively stack together through weak hydrogen bonds to form a three-dimensional supramolecular structure. The single crystals of CityU-10 are found to display promising optical properties with a large birefringence. Our results would offer new guidelines for designing and preparing new crystalline covalent polymers through tellurium-based chemistry.

Orbital Coupling of PbO7 Node in Single-Crystal Metal-Organic Framework Enhances Li-O2 Battery Electrocatalysis.

Optimizing the local coordination environment of metal centers in metal-organic frameworks (MOFs) is crucial yet challenging for regulating the overpotential of lithium-oxygen (Li-O2) batteries. Herein, we report the synthesis of a class of PbO7 nodes in a single crystal MOF (naphthalene-lead-MOF, known as Na-Pb-MOF) to significantly enhance the kinetics of both discharge and charge processes. Compared to the PbO6 node in the single-crystal tetramethoxy-lead-MOF (4OMe-Pb-MOF), the bond length between Pb and O in the PbO7 node of Na-Pb-MOF increases, resulting in weaker Pb 5d-O 2p orbital coupling, which optimizes the adsorption interaction toward intermediates, and thereby promotes the rate-determining steps of both the reduction of LiO2 to Li2O2 and the oxidation of LiO2 to O2 for reducing the activation energy of the overall reaction. Consequently, Li-O2 batteries based on Na-Pb-MOF electrocatalysts exhibit a low total charge-discharge overpotential of 0.52 V and an excellent cycle life of 140 cycles.

Thermally Induced Persistent Covalent-Organic Frameworks Radicals.

Persistent covalent-organic framework (COF) radicals hold important applications in magnetics and spintronics; however, their facile synthesis remains a daunting challenge. Here, three p-phenylenediacetonitrile-based COFs (named CityU-4, CityU-5, and CityU-6) were synthesized. Upon heat treatment (250 °C for CityU-4 and CityU-5 or 220 °C for CityU-6), these frameworks were brought into their persistent radical forms (no obvious changes after at least one year), together with several observable factors, including color changes, red-shifted absorption, the appearance of electron spin resonance (ESR) signals, and detectable magnetic susceptibility. The theoretical simulation suggests that after heat treatment, lower total energy and nonzero spin density are two main factors to guarantee persistent COFs radicals and polarized spin distributions. This work provides an efficient method for the preparation of persistent COF radicals with promising potentials.

Constructing Chiral Covalent-Organic Frameworks for Circularly Polarized Light Detection.

The use of chiral covalent organic frameworks (COFs) as active elements in photodetectors to directly identify circularly polarized light (CPL) can meet the requirement of integration and miniaturization of the as-fabricated devices. Herein, the design and synthesis of two isoreticular chiral two-dimensional (2D) COFs (CityU-7 and CityU-8) by introducing photosensitive porphyrin-based amines (5,10,15,20-tetrakis(4-aminophenyl)porphyrin) to enhance the optical absorption and chiral aldehyde linkage (2,5-bis((S/R))-2-methylbutoxy)terephthalaldehyde) to engender chirality for direct CPL detection  are  reported. Their crystalline structures  were  confirmed by powder X-ray diffraction, Fourier-transform infrared spectroscopy, and low-dose transition electron microscopy. Employing both chiral COFs as the active layers in photodetectors, left-handed circularly (LHC) and right-handed circularly (RHC) polarized light at 405 nm can be well distinguishable with short response time, high responsivity, and satisfying detectivity. The study provides the first example on the design and synthesis of chiral COFs for direct detection of CPL.

Removing Perfluoro Pollutants PFOA and PFOS by Two-Pronged Design of a Ni8-Pyrazolate Porous Framework.

Inspired by the practical need to remove persistent perfluoro pollutants from the environment, we leverage cutting-edge crystal engineering approaches. For this, we set our eyes on a recent porous coordination framework system based on the Ni8-oxo cluster and pyrazolate linkers as it is known for its stability to bases and other harsh environmental conditions. Our designer linker molecule here features (1) pyrazole donors masked by t-butyloxycarbonyl and (2) ethynyl side units protected by triisopropylsilyl groups. The former solvothermally demasks to assemble the Ni8-pyrazolate framework, in which the triisopropylsilyl groups can be post-synthetically cleaved by guest fluoride ions to unveil the terminal alkyne group (-CCH). The ethynyl groups of the framework solid offer versatile reactions for functionalization, as with perfluorophenyl azide (via a click reaction) to afford the two prongs of the 1,2,3-triazole base unit and the perfluoro unit. Together, these two functions make for an effective adsorbent for the topical acid pollutants of perfluorooctanoic acid and perfluorooctanesulfonic acid, with a high apparent rate constant (kobs) of 0.99 g mg-1 h-1 and large maximum uptake capacity (qmax) of 268.5 mg g-1 for perfluorooctanoic acid and kobs of 0.77 g mg-1 h-1 and qmax of 142.1 mg g-1 for perfluorooctanesulfonic acid.

Cascaded orbital-oriented hybridization of intermetallic Pd3Pb boosts electrocatalysis of Li-O2 battery.

Catalysts with a refined electronic structure are highly desirable for promoting the oxygen evolution reaction (OER) kinetics and reduce the charge overpotentials for lithium-oxygen (Li-O2) batteries. However, bridging the orbital interactions inside the catalyst with external orbital coupling between catalysts and intermediates for reinforcing OER catalytic activities remains a grand challenge. Herein, we report a cascaded orbital-oriented hybridization, namely alloying hybridization in intermetallic Pd3Pb followed by intermolecular orbital hybridization between low-energy Pd atom and reaction intermediates, for greatly enhancing the OER electrocatalytic activity in Li-O2 battery. The oriented orbital hybridization in two axes between Pb and Pd first lowers the d band energy level of Pd atoms in the intermetallic Pd3Pb; during the charging process, the low-lying 4dxz/yz and 4dz2 orbital of the Pd further hybridizes with 2π* and 5σ orbitals of lithium superoxide (LiO2) (key reaction intermediate), eventually leading to lower energy levels of antibonding and, thus, weakened orbital interaction toward LiO2. As a consequence, the cascaded orbital-oriented hybridization in intermetallic Pd3Pb considerably decreases the activation energy and accelerates the OER kinetics. The Pd3Pb-based Li-O2 batteries exhibit a low OER overpotential of 0.45 V and superior cycle stability of 175 cycles at a fixed capacity of 1,000 mAh g-1, which is among the best in the reported catalysts. The present work opens up a way for designing sophisticated Li-O2 batteries at the orbital level.

Engineering eg Orbital Occupancy of Pt with Au Alloying Enables Reversible Li-O2 Batteries.

Constructing well-designed catalysts to accelerate OER catalytic activity and alleviate the charge overpotential is prevailing for achieving sophisticated Li-O2 batteries. Herein, we report a concept for engineering the eg occupancy of Pt with M alloying (M=Au, Ru) to tune the charge overpotentials for achieving high-performance Li-O2 batteries. The X-ray photoelectron spectroscopy results coupled with density functional theory (DFT) calculations reveal that the highly electronegative Au can capture more eg electrons from Pt, leading to less eg electrons of Pt in PtAu than that in PtRu. The lower eg occupancy of Pt atoms in PtAu alloys entails the upward shift of the Pt d band, which causes a strong binding strength towards the intermediates (LiO2 ), thereby decreasing the OER energy barrier. As a consequence, the Li-O2 battery with a PtAu cathode delivers a low charge overpotential of 0.36 V and superior cycle life of 220 cycles at a cutoff capacity of 1000 mAh g-1 , which is among the best in the reported noble metal-based cathodes.

Lewis-Acidic PtIr Multipods Enable High-Performance Li-O2 Batteries.

The sluggish oxygen reaction kinetics concomitant with the high overpotentials and parasitic reactions from cathodes and solvents is the major challenge in aprotic lithium-oxygen (Li-O2 ) batteries. Herein, PtIr multipods with a low Lewis acidity of the Pt atoms are reported as an advanced cathode for improving overpotentials and stabilities. DFT calculations disclose that electrons have a strong disposition to transfer from Ir to Pt, since Pt has a higher electronegativity than Ir, resulting in a lower Lewis acidity of the Pt atoms than that on the pure Pt surface. The low Lewis acidity of Pt atoms on the PtIr surface entails a high electron density and a down-shifting of the d-band center, thereby weakening the binding energy towards intermediates (LiO2 ), which is the key in achieving low oxygen-reduction-reaction (ORR) and oxygen-evolution-reaction (OER) overpotentials. The Li-O2 cell based on PtIr electrodes exhibits a very low overall discharge/charge overpotential (0.44 V) and an excellent cycle life (180 cycles), outperforming the bulk of reported noble-metal-based cathodes.

Cesium Lead Bromide Perovskite-Based Lithium-Oxygen Batteries.

The main challenge for lithium-oxygen (Li-O2) batteries is their sluggish oxygen evolution reaction (OER) kinetics and high charge overpotentials caused by the poorly conductive discharge products of lithium peroxide (Li2O2). In this contribution, the cesium lead bromide perovskite (CsPbBr3) nanocrystals were first employed as a high-performance cathode for Li-O2 batteries. The battery with a CsPbBr3 cathode can exhibit the lowest charge overpotential of 0.5 V and the best cycling performance of 400 cycles among all the reported perovskite-based Li-O2 cells, which represents a new benchmark. Most importantly, the density functional theory (DFT) calculations further prove that the rate limitation step during OER processes is the decomposition of LiO2 to form O2 and Li+, and the weak adsorption strength between CsPbBr3 surfaces and LiO2 results in a low charge overpotential for the CsPbBr3-based Li-O2 battery. This work first demonstrates the good potential of CsPbBr3 for application in metal-air batteries.

Multilevel conductance switching of a memory device induced by enhanced intermolecular charge transfer.

The modification of the terminal electron-donating groups induces a critical change in molecular aggregation and the intermolecular charge-transfer effect of the symmetric D-A1-A2-A1-D molecules that correlate with an addressable variation of memory performance from binary to ternary.

Cystic lymphangioma of adrenal gland: a clinicopathological study of 3 cases and review of literature.

Cystic lymphangioma of the adrenal gland is a rare and benign lesion, most often found incidentally during abdominal imaging studies, abdominal surgery or at autopsy. We aimed to retrospectively review all adrenal lymphangioma cases at our hospital, further document their lymphatic origin by immunohistochemical staining and discuss the differential diagnosis with other cystic adrenal gland lesions. A total of 3 adrenal lymphangioma cases were identified. All three patients were men and adults at time of diagnosis aged 41 years, 43 years, and 66 years, respectively. All were incidentally identified during investigating for unrelated reasons, two of which were discovered by routine radiologic check-up while the last one was found during imaging detection of ureteral cancer. The average size of an adrenal lymphangioma lesion was 3.2 cm (range, 2.5-4.6 cm). Histologically, all three cases showed a typical multicystic architecture with dilated spaces lined by flattened, bland, simple lining. The cystic spaces occasionally contained proteinaceous material but lacked red blood cell content. On immunohistochemical stains, D2-40 cytoplasmic staining was positive in all three lesions, whereas AE1/AE3 was negative, thus, confirming their lymphatic nature.