Rapid and accurate quality evaluation of Angelicae Sinensis Radix based on near-infrared spectroscopy and Bayesian optimized LSTM network.

The authentic traditional Chinese medicines (TCMs) including Angelicae Sinensis Radix (ASR) are the representative of high-quality herbals in China. However, ASR from authentic region being adulterated or counterfeited is frequently occurring, and there is still a lack of rapid quality evaluation methods for identifying the authentic ASR. In this study, the color features of ASR were firstly characterized. The results showed that the authentic ASR cannot be fully identified by color characteristics. Then near-infrared (NIR) spectroscopy combined with Bayesian optimized long short-term memory (BO-LSTM) was used to evaluate the quality of ASR, and the performance of BO-LSTM with common classification and regression algorithms was compared. The results revealed that following the pretreatment of NIR spectra, the optimal NIR spectra combined with BO-LSTM not only successfully distinguished authentic, non-authentic, and adulterated ASR with 100 % accuracy, but also accurately predicted the adulteration concentration of authentic ASR (R2 > 0.99). Moreover, BO-LSTM demonstrated excellent performance in classification and regression compared with common algorithms (ANN, SVM, PLSR, etc.). Overall, the proposed strategy could quickly and accurately evaluate the quality of ASR, which provided a reference for other TCMs.

Comparative study on Angelica sinensis after different processing with yellow rice wine in color, aromas, chemical components, and antioxidant activities.

This study aimed to explore the differences in raw Angelica Sinensis (RAS), wine washing AS (WAS), and wine stir-frying AS (WSAS). The results showed there were differences among the three AS in color and aroma, and 34 aroma compounds were identified. The content determination results revealed the ferulic acid and Z-ligustilide levels of RAS decreased after processing, and those in WAS were higher than in WSAS. Furthermore, 85 representative common components and 37 unique components were tentatively identified in three AS. Finally, the free radical scavenging assay results indicated the antioxidant capacity of RAS was reduced after processing, and the antioxidant capacity of WAS was better than WSAS. Collectively, the RAS undergoes significant changes in color, aromas, components, and antioxidant ability after processing, and the different processing methods also result in significant differences between WAS and WSAS.

Parasitic flies alter the dietary preference of grasshoppers.

Parasitism is known to affect the behavior of host species to enhance parasite dispersal and transmission. However, host behavioral responses to parasitism unrelated to parasite dispersal and transmission have been much less studied. The objective of this study was to determine whether grasshopper hosts infected and uninfected with a parasitic fly (Blaesoxipha sp.) differ in terms of the nutrient content of the diet they consume. We investigated the dietary preferences of two grasshopper species (i.e. Asulconotus chinghaiensis and Chorthippus fallax) in terms of the C/N composition of plant species consumed, and determined whether this affected the egg production of unparasitized and parasitized grasshoppers by flies in a Tibetan alpine meadow. The composition of plants consumed differed significantly between the unparasitized and parasitized grasshoppers. Specifically, the abundance of N-rich legumes was lower and that of high C/N grasses was higher in the diet of the parasitized compared to the unparasitized grasshoppers. Diet N content was higher and C/N was lower in the diet of unparasitized grasshoppers, and parasitized females produced fewer eggs than their unparasitized conspecifics. Future enquiries are needed to understand the specific mechanisms underlying these dietary differences. The effects of parasites on the fitness-associated behavior of hosts should be studied more broadly to better understand parasite evolution and adaptation.

Moderate Grazing Promotes Arthropod Species Diversity in an Alpine Meadow.

Livestock grazing is an important tool used in grassland land management practices. Studies have substantially addressed the effect of grazing on plant species diversity, revealing that moderate grazing increases plant species diversity. However, few studies have dealt with the relationship between grazing and arthropod species diversity, which remains unclear. Here, we hypothesize that moderate grazing promotes arthropod species diversity because arthropods are directly or indirectly dependent on plant diversity. In this study, we conducted a two-year plant and arthropod survey from 2020 to 2021 at four levels of grazing intensity, i.e., nongrazing (as a control), light grazing, moderate grazing, and heavy grazing, of the long-term grazing experiment starting in 2016. The data show that plant species diversity peaked in the moderate grazing treatment, and herbivore species diversity was positively correlated with plant species diversity (and hence peaked in the moderate grazing treatment). Moderate grazing promoted parasitoid species diversity, which was positively correlated with herbivore species diversity. However, predator species diversity did not significantly differ among the four treatments. In addition, saprophage species diversity decreased, whereas coprophages increased with increasing grazing levels, such that species richness (but not species diversity of detritivores statistically) was highest in the moderate grazing treatment. Consequently, the species diversity of arthropods as a whole peaked at the moderate grazing level, a phenomenology that is consistent with the intermediate disturbance hypothesis. Considering that moderate grazing has been found to increase plant species diversity, facilitate soil carbon accumulation, and prevent soil erosion, we suggest that moderate grazing would maximize multi-functional ecosystem services.

Three-dimensional digital measurement of the facet joint in normal individual and lumbar intervertebral disc herniation patients aged 13 - 18 years.

BACKGROUND: Lumbar facet joint is an important element of spinal "three-joint complex". Whether there is a relationship between strange structure of facet joint and adolescent lumbar disc herniation (ALDH) is nonetheless controversial, and the current research is mainly centered on adults. OBJECTIVE: To find out the normal lumbar facet joints between 13 and 18 years old to provide anatomical basis for early diagnosis and therapy of lumbar disc herniation. METHODS: CT imaging information of 32 sufferers with lumbar disc herniation aged from 13 to 18 years old in Inner Mongolia have been collected as the ALDH group, and 62 wholesome subjects in the equal period had been chosen as the normal group. Uncooked records of continuous scanning lumbar tomography pix were imported into MIMICS 21.0 for evaluation and size in DICOM format. The parameters include facet joint height, facet joint width, et al. RESULTS: 1. The left and right transverse angle of L5S1 segment in the ALDH group were (52.41 ± 9.2) ° and (55.99 ± 10.91) ° (P < 0.05), and the differences were statistically significant. The right side is larger than the left side. 2. Facet joint thickness in L3-L5 segment of the normal group was significantly higher than that of male (1.63 ± 0.32) mm than that of female (1.38 ± 0.25) mm; In 16-18 years old group, comparison of facet joint cross-sectional area was statistically significant (22.1 ± 3.04) mm2 in male than (18.92 ± 3.71) mm2 in female. 3. In comparison between normal and ALDH group, there was significant difference in L3-4 transverse angle (P < 0.05), L4-5 facet joint height and facet joint thickness (P < 0.05), L5S1 facet joint thickness and transverse angle (P < 0.05). CONCLUSION: When ALDH occurs in the L5S1 segment, there is a substantial difference between the left and right sides of the transverse angle, and there is a difference in the thickness and the facet joint cross-sectional area between males and females, which is generally larger in males than in females. Facet joint height is larger, transverse angle of left and right is asymmetric, inferior articular process is larger, and facet joint thickness is smaller can indicate that lumbar disc herniation is effortless to occur.

Anatomic measurement and clinical significance of the middle and lower thoracic segments in normal adults / Medición anatómica e importancia clínica de los segmentos torácico medio e inferior en adultos normales

Thoracic disc herniation (TDH) has high technical difficulty and serious complications, and the clinical anatomy of thoracic intervertebral foramen is less. Collecting 10 adult male cadavers, measuring the longitudinal diameter of the dorsal root ganglion (D1), the transverse diameter of the dorsal root ganglion (D2), horizontal sagittal diameter of the upper edge of the intervertebral disc (S1), the high of intervertebral foramen (H1), the height of articulationes costovertebrales (H2), the height of intervertebral disk (H3), the angel of the dorsal root ganglion (a). The aim of this study is to explore the safe area of middle and lower thoracic section and provide anatomical basis for the selection of operative cannula. Mastering the certain rules of the anatomical structure of the middle and lower thoracic segments, and referring to the above parameters in clinical, is conducive to the selection of the working casing during surgery.

La hernia de disco torácico (TDH) tiene una alta dificultad técnica y complicaciones graves, y la anatomía clínica del agujero intervertebral torácico es menor. Recolectando 10 cadáveres machos adultos, midiendo el diámetro longitudinal del ganglio de la raíz dorsal (D1), el diámetro transversal del ganglio de la raíz dorsal (D2), el diámetro sagital horizontal del borde superior del disco intervertebral (S1), el colmo del intervertebral agujero (H1), la altura de las articulaciones costovertebrales (H2), la altura del disco intervertebral (H3), el ángel del ganglio de la raíz dorsal (α). El objetivo de este estudio es explorar el área segura de la sección torácica media y baja y proporcionar una base anatómica para la selección de la cánula operatoria. Dominar ciertas reglas de la estructura anatómica de los segmentos torácicos medio e inferior, y referirse a los parámetros anteriores en clínica, es propicio para la selección de la carcasa de trabajo durante la cirugía.

A micro-CT study of different regions of the atlas / Un estudio de micro-CT de diferentes regiones del atlas

This study aimed to examine the differences in bone microarchitecture between different regions of the atlas in 28 dry atlas specimens using micro-CT, in order to explain the mechanism of the predilection sites of atlas fractures from the morphological point of view. A total of 28 dry specimens of intact adult atlas were randomly selected, scanned by micro-CT, and divided into a region from the anterior arch midpoint (AAM) to the lateral masses (LM), a LM region, and a region from the LM to the posterior arch midpoint (PAM). Trabecular thickness, separation, number, connectivity, and structure model index were measured for each of the three regions using the built-in software of the CT scanner. Trabecular thickness was all measured to be 0.11 ± 0.00 mm for AAM to LM, LM, and LM to PAM. Trabecular separation: AAM to LM > LM to PAM > LM. Trabecular number: LM > LM to PAM > AAM to LM. Connectivity: LM > LM to PAM > AAM to LM. Structure model index: LM > LM to PAM > AAM to LM. A lower trabecular number and connectivity and higher trabecular separation were seen in the anterior and posterior arches of the atlas, in which higher fracture rates were reported. By contrast, a higher trabecular number and connectivity and lower trabecular separation were seen in the lateral masses, in which lower fracture rates were reported.

Este estudio tuvo como objetivo examinar las diferencias en la microarquitectura ósea entre diferentes regiones del atlas en 28 muestras de atlas secas utilizando micro-CT, con el fin de informar el área de mayor frecuencia en las fracturas de atlas, desde el punto de vista morfológico. Se seleccionaron al azar un total de 28 muestras secas de atlas adultos intactas las que se escanearon por micro-CT y se dividieron en una región desde el punto medio del arco anterior (MAA) hasta las masas laterales (ML), una región ML y una región desde el ML hasta el punto medio del arco posterior (MAP). Se midió el grosor trabecular, la separación, el número, la conectividad y el índice del modelo de estructura para cada una de las tres regiones utilizando el software incorporado del escáner CT. El grosor trabecular se midió en 0,11 ± 0,00 mm para MAA a ML, ML y ML a MAP. Separación trabecular: MAA a ML> ML a MAP> ML. Número trabecular: ML> ML a MAP> MAA a ML. Conectividad: ML> ML a MAP> MAA a ML. Índice del modelo de estructura: ML> ML a MAP> MAA a ML. Se observó un menor número de estructuras trabeculares y conectividad y una mayor separación trabecular en los arcos anterior y posterior del atlas, en los que se informaron tasas de fracturas más altas. Por el contrario, se observó un mayor número de estructuras trabeculares y conectividad, y una menor separación trabecular en las masas laterales, en las que se observó un número menor de fracturas.

Micro-architecture study of the normal infant auditory ossicles with micro-computed tomography / Estudio de microarquitectura de los osículos auditivos infantiles normales con tomografía microcomputarizada

This study aimed to investigate the micro-anatomical morphology of ossicular chain in term fetus using micro-CT, in order to analyze the parameters of internal ossicular structure that may affect sound conduction.Four ossicular chains from two term fetuses were scanned by micro-CT. The related structural parameters of the trabeculae within the incus and malleus were calculated and compared. The fine anatomical structure of the auditory ossicles was analyzed.The microstructure of each auditory ossicles in term fetuses was clearly revealed by micro-CT. A marrow cavity was observed in the incus and malleus. In statistical analysis of the structural parameters of trabeculae in the incus and malleus, significant differences were found in BS/BV and Tb.Th (P < 0.05). Micro-CT enables the visualization of internal ossicular structure. The auditory ossicles in term fetus has good bone quality. The obtained bone structure data will help to clarify the physiological functions of normal fetal auditory ossicles.

Este estudio tuvo como objetivo investigar la morfología microanatómica de la cadena osicular en el feto a término con micro-CT, con el fin de analizar los parámetros de la estructura osicular interna que pueden afectar la conducción del sonido. Cuatro cadenas osiculares de dos fetos a término fueron examinadas por micro-CT. Se calcularon y compararon los parámetros estructurales relacionados de las trabéculas dentro de los incus y malleus. Se analizó la estructura anatómica fina de los osículos. Se observó claramente la microestructura de cada osículo en los fetos y la cavidad medular en el incus y el malleus. En el análisis estadístico de los parámetros estructurales de las trabéculas en el incus y el malleus, se encontraron diferencias significativas en BS / BV y Tb.Th (P <0,05). Micro-CT permite la visualización de la estructura osicular interna. Los osículos en el feto a término tienen buena calidad ósea. Los datos obtenidos de la estructura ósea ayudarán para aclarar las funciones fisiológicas de los osículos auditivos fetales normales.

Photocatalytic degradation of humic acids using substrate-supported Fe³âº-doped TiO2 nanotubes under UV/O3 for water purification.

In this paper, Fe(3+)-doped TiO2 nanotubes (Fe-TNTs) were successfully synthesized using hydrothermal method. Four different types of substrates, more specifically, ceramsite, zeolite, activated alumina, and activated carbon (AC), have been investigated in the study. The substrate-supported Fe-TNTs were used to effectively decompose humic acids (HAs) in water under O3/UV conditions. The experiment results show that the highest photocatalytic activity was obtained in the presence of AC-supported 1.0 atomic percent (at.%) Fe-TNTs calcined at 500 °C, as HAs was removed by 97.4%, with a pseudo-first-order rate constant of 0.126/min. The removal efficiencies of HAs reduced when the catalysts was repeatedly used, since the amount of adsorption sites of the supporting substrates decreased. However, even after the catalyst was repeatedly used for five times, the removal efficiency of HAs in the presence of AC-supported catalyst, which was 78.5%, was still sufficient in water treatment. The enhanced photocatalytic activity of AC-supported Fe-TNTs was related to a synergistic effect of AC adsorption and Fe-TNT photocatalytic ozonation.