Dynamic evaluation of China's atmospheric environmental pressure from 2008 to 2017: Trends and drivers.

Evaluating the pressure of atmospheric pollutant emissions on the atmospheric environment is crucial for effective pollution control and emission reduction policies. This study introduces a novel Atmospheric Environmental Pressure Index (AEPI) and employs a dynamic comprehensive method to evaluate China's Atmospheric Environmental Pressure (AEP) across 31 provinces from 2008 to 2017. The drivers of AEP were analyzed using a spatial panel data model, uncovering the integral role of pollution reduction policies, particularly the Air Pollution Prevention and Control Action Plan, which led to a 25% reduction in AEP during its enforcement. Our findings reveal significant spatial disparities in AEP, with higher levels in the Beijing-Tianjin-Hebei and Yangtze River Delta regions. The regression analysis identifies economic development, industrial structure, energy efficiency, environmental regulations, and urbanization as key influencing factors, though their impacts vary across different regions, suggesting the need for region-specific pollution control policies. Furthermore, the shift in the AEP gravity center from 2008 to 2017 indicated a southeastward movement, suggesting the necessity to focus air pollution control efforts on the southeast provinces. In conclusion, the AEPI developed in this study enables comparative analysis of AEP across different regions and facilitates the monitoring of long-term trends, which is valuable in guiding regional air pollution control in China.

A review of the technology and applications of methods for evaluating the transport of air pollutants.

A variety of methods based on air quality models, including tracer methods, the brute-force method (BFM), decoupled direct method (DDM), high-order decoupled direct method (HDDM), response surface models (RSMs) and so on forth, have been widely used to study the transport of air pollutants. These methods have good applicability for the transport of air pollutants with simple formation mechanisms. However, differences in research conclusions on secondary pollutants with obvious nonlinear characteristics have been reported. For example, the tracer method is suitable for the study of simplified scenarios, while HDDM and RSMs are more suitable for the study for nonlinear pollutants. Multiple observation techniques, including conventional air pollutant observation, lidar observation, air sounding balloons, vehicle-mounted and ship-borne technology, aerial surveys, and remote sensing observations, have been utilized to investigate air pollutant transport characteristics with time resolution as high as 1 sec. In addition, based on a multi-regional input-output model combined with emission inventories, the transfer of air pollutant emissions can be evaluated and applied to study the air pollutant transport characteristics. Observational technologies have advantages in temporal resolution and accuracy, while modeling technologies are more flexible in spatial resolution and research plan setting. In order to accurately quantify the transport characteristics of pollutants, it is necessary to develop a research method for interactive verification of observation and simulation. Quantitative evaluation of the transport of air pollutants from different angles can provide a scientific basis for regional joint prevention and control.

[Applying Photochemical Indicators to Analyze Ozone Sensitivity in Handan].

Ozone pollution in Handan has become severe in recent years and in the summer of 2018, the average maximum daily 8-hour average ozone concentration in Handan was 175 µg·m-3 with a maximum of 257 µg·m-3. Ozone concentrations exceeded the National Air Quality Grade Ⅱ Standard in 59% of cases. In this study, the H2O2/HNO3 indicator was applied to analyze summertime ozone sensitivity in Handan using the WRF-CMAQ modeling system. The results showed that H2O2/HNO3 was more appropriate than other ozone indicators, both theoretically and based on simulation outputs. The good simulation effect of CMAQ on H2O2 and HNO3 was attributed to fine emission inventory and grid resolution. The H2O2/HNO3 simulation results showed that the relative importance of a VOCs-limited regime decreased month by month; a VOCs-NOx-mixed-limited regime was dominant in June; and a NOx-limited regime was more dominant in July and August than in June. The remarkable spatial difference in VOCs and NOx emission ratios among the counties of Handan led to differences in ozone sensitivity. The VOCs-limited regime was concentrated in counties where VOCs/NOx emission ratios were lower than 1.7. Southern counties had a NOx-limited regime, where VOCs/NOx emission ratios were higher than 6.9. Counties with VOCs/NOx emission ratios varying from 1.7 to 6.9 were more susceptible to both VOCs and NOx. According to these results, the transition range of HCHO/NO2, O3/HNO3, and O3/NOx ratios were adjusted to 0.35-0.6, 20-35, and 10-25 respectively. Adjusting the transition range of H2O2/(O3+NO2) was not effective, indicating that this indicator may not be applicable to Handan.

Temporal and spatial characteristics of PM2.5 transport fluxes of typical inland and coastal cities in China.

Local pollution and the cross-boundary transmission of pollutants between cities have an inevitable impact on the atmosphere. Quantitative assessments of the contribution of transport to pollution in inland and coastal cities are necessary for the implementation of practical, regional, and joint emission control strategies. In this study, the Comprehensive Air Quality Model (CAMx), together with the Weather Research and Forecasting model (WRF), was used to simulate the contributions to pollution of different cities in 2016. The monthly inflow, outflow, and net flux from the ground to the extended layers served as the three main indicators for the analysis of the interactions of PM2.5 transport between adjacent cities. Between inland and coastal cities, the magnitude of inflow and outflow are larger in the former than in the latter. The inflow flux in the inland cities (Beijing and Shijiazhuang) was 10.6 and 10.7 kt/day, respectively, while that in the coastal cities (Tianjin, Shanghai, Hefei, Nanjing, and Hangzhou) was 9.1, 3.3, 5.8, 4.4, and 3.7 kt/day, respectively. In terms of variation over the year, the strongest inflow in the BTH region occurred in April, followed by October, July, and January, while that in the coastal cities in YRD occurred in January, followed by October, April, and July. Therefore, based on the flux intensity calculations and the transport flux pathways, effective joint control measures can be provided with scientific support, and a better understanding of the evolutionary mechanism among inland and coastal cities can be acquired.

[Pollution Characteristics and Sensitivity of Surface Ozone in a Typical Heavy-Industry City of the North China Plain in Summer].

The pollution characteristics of surface ozone and its response to meteorological factors and precursors were studied based on monitoring and Model-3/CMAQ modeling from May to August 2018 in Handan City, China. The monitoring results showed that the maximum daily 8-hour average ozone concentration (MDA8 O3) ranged from 38.0-238.0 µg·m-3, and the nonattainment for ozone reached 44.7% during the studied period, indicating the more severe photochemical pollution in summer in Handan City. The ozone concentration was positively correlated with temperature (R=0.74 on nonattainment days and 0.42 on attainment days), but negatively correlated with relative humidity (R=-0.63 on nonattainment days and -0.58 on attainment days), demonstrating the role of photochemistry in the surface ozone of Handan City. Moreover, the highest ozone level occurred at wind speeds higher than 2.25 m·s-1 or lower than 1.00 m·s-1 during ozone nonattainment days, which indicated that regional transport and local accumulation can both cause serious ozone pollution in the city. Regarding the response of ozone to its precursors (VOCs and NOx), model simulation results based on the brute force method showed the stronger positive sensitivity to VOCs, but a weak negative sensitivity to NOx. Therefore, reduction of anthropogenic VOCs emissions is the key to improving ozone pollution in Handan City. We used the propylene-equivalent method to identify the importance of alkene and aromatic species for ozone pollution during ozone nonattainment days.