ABSTRACT
Consumers can be exposed to many foodborne biological hazards that cause diseases with varying outcomes and incidence and, therefore, represent different levels of public health burden. To help the French risk managers to rank these hazards and to prioritize food safety actions, we have developed a three-step approach. The first step was to develop a list of foodborne hazards of health concern in mainland France. From an initial list of 335 human pathogenic biological agents, the final list of "retained hazards" consists of 24 hazards, including 12 bacteria (including bacterial toxins and metabolites), 3 viruses and 9 parasites. The second step was to collect data to estimate the disease burden (incidence, Disability Adjusted Life Years) associated with these hazards through food during two time periods: 2008-2013 and 2014-2019. The ranks of the different hazards changed slightly according to the considered period. The third step was the ranking of hazards according to a multicriteria decision support model using the ELECTRE III method. Three ranking criteria were used, where two reflect the severity of the effects (Years of life lost and Years lost due to disability) and one reflects the likelihood (incidence) of the disease. The multicriteria decision analysis approach takes into account the preferences of the risk managers through different sets of weights and the uncertainties associated with the data. The method and the data collected allowed to estimate the health burden of foodborne biological hazards in mainland France and to define a prioritization list for the health authorities.
ABSTRACT
The European Commission asks scientific and technical assistance from EFSA to determine the impact of the revision of the Australian monitoring programme on its ability to detect microbiological contamination. Considering that, in 2010, the European Commission determined the current Australian monitoring programme to be equivalent to the EU requirements for microbiological monitoring further to an EFSA scientific assessment, the current and proposed programmes were described and the total number of alerts was compared using a probabilistic modelling approach. In the current programme, only beef and sheep carcasses are monitored using three-class moving window sampling plans, while in the proposed programme, carcass, bulk meat, primal and offal are monitored using four two-class sampling plans and Salmonella testing is excluded. The models revealed that the current programme provides a higher number of alerts for APC, while the proposed monitoring programme provides a higher number of alerts for E. coli. For APC and E. coli combined, the mean, 5th and 95th centiles of the uncertainty distribution of the total number of alerts in the current and the proposed monitoring programme are 201 [179, 227] and 172 [149, 194] for beef, and 199 [175, 222] and 2897 [2795, 3008] for sheep, respectively. For Salmonella, there are no alerts for the proposed programme since sampling is excluded while for the current programme, the estimated mean, 5th and 95th centiles of the uncertainty distribution of the number of alerts for a 5-year period were 143 [126, 144] for heifer/steer, 1.6 [0, 4] for cow/bull and 0 [0, 0] for lamb/sheep. Overall, for APC and E. coli, the estimated total number of alerts was similar (beef) or higher (sheep) for the proposed compared to the current programme. In contrast, Salmonella sampling is excluded from the proposed programme and thus cannot detect the number of current alerts.
ABSTRACT
A review of quantitative risk assessment (QRA) models of Listeria monocytogenes in produce was carried out, with the objective of appraising and contrasting the effectiveness of the control strategies placed along the food chains. Despite nine of the thirteen QRA models recovered being focused on fresh or RTE leafy greens, none of them represented important factors or sources of contamination in the primary production, such as the type of cultivation, water, fertilisers or irrigation method/practices. Cross-contamination at processing and during consumer's handling was modelled using transfer rates, which were shown to moderately drive the final risk of listeriosis, therefore highlighting the importance of accurately representing the transfer coefficient parameters. Many QRA models coincided in the fact that temperature fluctuations at retail or temperature abuse at home were key factors contributing to increasing the risk of listeriosis. In addition to a primary module that could help assess current on-farm practices and potential control measures, future QRA models for minimally processed produce should also contain a refined sanitisation module able to estimate the effectiveness of various sanitisers as a function of type, concentration and exposure time. Finally, L. monocytogenes growth in the products down the supply chain should be estimated by using realistic time-temperature trajectories, and validated microbial kinetic parameters, both of them currently available in the literature.
ABSTRACT
Better knowledge regarding the Listeria monocytogenes dose-response (DR) model is needed to refine the assessment of the risk of foodborne listeriosis. In 2018, the European Food Safety Agency (EFSA) derived a lognormal Poisson DR model for 14 different age-sex sub-groups, marginally to strain virulence. In the present study, new sets of parameters are developed by integrating the EFSA model for these sub-groups together with three classes of strain virulence characteristics ("less virulent", "virulent", and "more virulent"). Considering classes of virulence leads to estimated relative risks (RRs) of listeriosis following the ingestion of 1000 bacteria of "less virulent" vs. "more virulent" strains ranging from 21.6 to 24.1, depending on the sub-group. These relatively low RRs when compared with RRs linked to comorbidities described in the literature suggest that the influence of comorbidity on the occurrence of invasive listeriosis for a given exposure is much more important than the influence of the virulence of the strains. The updated model parameters allow better prediction of the risk of invasive listeriosis across a population of interest, provided the necessary data on population demographics and the proportional contribution of strain virulence classes in food products of interest are available. An R package is made available to facilitate the use of these dose-response models.
ABSTRACT
Invasive listeriosis, due to its severe nature in susceptible populations, has been the focus of many quantitative risk assessment (QRA) models aiming to provide a valuable guide in future risk management efforts. A review of the published QRA models of Listeria monocytogenes in seafood was performed, with the objective of appraising the effectiveness of the control strategies at different points along the food chain. It is worth noting, however, that the outcomes of a QRA model are context-specific, and influenced by the country and target population, the assumptions that are employed, and the model architecture itself. Studies containing QRA models were retrieved through a literature search using properly connected keywords on Scopus and PubMed®. All 13 QRA models that were recovered were of short scope, covering, at most, the period from the end of processing to consumption; the majority (85%) focused on smoked or gravad fish. Since the modelled pathways commenced with the packaged product, none of the QRA models addressed cross-contamination events. Many models agreed that keeping the product's temperature at 4.0-4.5 °C leads to greater reductions in the final risk of listeriosis than reducing the shelf life by one week and that the effectiveness of both measures can be surpassed by reducing the initial occurrence of L. monocytogenes in the product (at the end of processing). It is, therefore, necessary that future QRA models for RTE seafood contain a processing module that can provide insight into intervention strategies that can retard L. monocytogenes' growth, such as the use of bacteriocins, ad hoc starter cultures and/or organic acids, and other strategies seeking to reduce cross-contamination at the facilities, such as stringent controls for sanitation procedures. Since risk estimates were shown to be moderately driven by growth kinetic parameters, namely, the exponential growth rate, the minimum temperature for growth, and the maximum population density, further work is needed to reduce uncertainties.
ABSTRACT
A review of the published quantitative risk assessment (QRA) models of L. monocytogenes in meat and meat products was performed, with the objective of appraising the intervention strategies deemed suitable for implementation along the food chain as well as their relative effectiveness. A systematic review retrieved 23 QRA models; most of them (87%) focused on ready-to-eat meat products and the majority (78%) also covered short supply chains (end processing/retail to consumption, or consumption only). The processing-to-table scope was the choice of models for processed meats such as chorizo, bulk-cooked meat, fermented sausage and dry-cured pork, in which the effects of processing were simulated. Sensitivity analysis demonstrated the importance of obtaining accurate estimates for lag time, growth rate and maximum microbial density, in particular when affected by growth inhibitors and lactic acid bacteria. In the case of deli meats, QRA models showed that delicatessen meats sliced at retail were associated with a higher risk of listeriosis than manufacture pre-packed deli meats. Many models converged on the fact that (1) controlling cold storage temperature led to greater reductions in the final risk than decreasing the time to consumption and, furthermore, that (2) lower numbers and less prevalence of L. monocytogenes at the end of processing were far more effective than keeping low temperatures and/or short times during retail and/or home storage. Therefore, future listeriosis QRA models for meat products should encompass a processing module in order to assess the intervention strategies that lead to lower numbers and prevalence, such as the use of bio-preservation and novel technologies. Future models should be built upon accurate microbial kinetic parameters, and should realistically represent cross-contamination events along the food chain.
ABSTRACT
A review of the published quantitative risk assessment (QRA) models of L. monocytogenes in dairy products was undertaken in order to identify and appraise the relative effectiveness of control measures and intervention strategies implemented at primary production, processing, retail, and consumer practices. A systematic literature search retrieved 18 QRA models, most of them (9) investigated raw and pasteurized milk cheeses, with the majority covering long supply chains (4 farm-to-table and 3 processing-to-table scopes). On-farm contamination sources, either from shedding animals or from the broad environment, have been demonstrated by different QRA models to impact the risk of listeriosis, in particular for raw milk cheeses. Through scenarios and sensitivity analysis, QRA models demonstrated the importance of the modeled growth rate and lag phase duration and showed that the risk contribution of consumers' practices is greater than in retail conditions. Storage temperature was proven to be more determinant of the final risk than storage time. Despite the pathogen's known ability to reside in damp spots or niches, re-contamination and/or cross-contamination were modeled in only two QRA studies. Future QRA models in dairy products should entail the full farm-to-table scope, should represent cross-contamination and the use of novel technologies, and should estimate L. monocytogenes growth more accurately by means of better-informed kinetic parameters and realistic time-temperature trajectories.
ABSTRACT
At the beginning of the COVID-19 pandemic, several contamination clusters were reported in food-processing plants in France and several countries worldwide. Therefore, a need arose to better understand viral transmission in such occupational environments from multiple perspectives: the protection of workers in hotspots of viral circulation; the prevention of supply disruption due to the closure of plants; and the prevention of cluster expansion due to exports of food products contaminated by the virus to other locations. This paper outlines a simulation-based approach (using agent-based models) to study the effects of measures taken to prevent the contamination of workers, surfaces, and food products. The model includes user-defined parameters to integrate characteristics relating to SARS-CoV-2 (variant of concern to be considered, symptom onset ), food-processing plants (dimensions, ventilation ), and other sociodemographic transmission factors based on laboratory experiments as well as industrial and epidemiological investigations. Simulations were performed for a typical meat-processing plant in different scenarios for illustration purposes. The results suggested that increasing the mask-wearing ratio led to great reductions in the probability of observing clusters of more than 25 infections. In the case of clusters, masks being worn by all workers limited the presence of contamination (defined as levels of at least 5 log10 viral RNA copies) on meat cuts at less than 0.05 % and maintained the production capacity of the plant at optimal levels. Increasing the average distance between two workers from less than 1 m to more than 2 m decreased the cluster-occurrence probability by up to 15 % as well as contamination of food products during cluster situations. The developed approach can open up several perspectives in terms of potential communication-support tools for the agri-food sector and further reuses or adaptations for other hazards and occupational environments.
Subject(s)
COVID-19 , SARS-CoV-2 , Humans , Pandemics/prevention & control , Meat , RNA, ViralABSTRACT
Exposure to chemical contaminants found in foods has been associated with various adverse health effects. Burden of disease studies are increasingly used to estimate the public health impact of such exposures. The aims of this study were to estimate the burden of disease due to dietary exposure to four chemicals in France in 2019 (lead (Pb), cadmium (Cd), methylmercury (MeHg), and inorganic arsenic (i-As)), and to develop harmonized methods that can be applied for other chemicals and countries. We used national food consumption data from the third French national food consumption survey, chemical food monitoring data from the Second French Total Diet Study (TDS), dose-response data and disability weights from scientific literature, and disease incidence and demographics from national statistics. We adopted a risk assessment approach to estimate disease burden, incidence, mortality, and Disability-Adjusted Life Years (DALYs) attributable to dietary exposure to the chemicals. In all models, we harmonized food classification and exposure assessment. We propagated uncertainty through the calculations using Monte Carlo simulation. We estimated that, among these chemicals, i-As and Pb were responsible for the highest disease burden. i-As was estimated to cause 820 DALYs, or approximately 1.25 DALYs per 100,000 inhabitants. The estimated burden of Pb was 1834 to 5936 DALYs, or 2.7 (lower bound) to 8.96 (upper bound) DALYs/100,000. The burden of MeHg (192 DALYs), and Cd (0 DALY) was substantially lower. The foods contributing most to disease burden was drinks (30 %), "other foods" (mostly composite dishes) (19 %), and fish and seafood (7 %). Interpretation of estimates needs to consider all underlying uncertainties, linked with data and knowledge gaps. The harmonized models are the first to make use of data from TDS, which are available in several other countries. Thus, they can be applied to estimate the burden and to rank food-associated chemicals at national level.
Subject(s)
Cadmium , Dietary Exposure , Animals , Quality-Adjusted Life Years , Lead , Cost of IllnessABSTRACT
Listeria monocytogenes can grow under stressful conditions and contaminate various food categories. Progresss in DNA sequencing-based identification methods, such as multi-locus sequence typing (MLST) now allow for more accurate characterization of pathogens. L. monocytogenes MLST genetic diversity is reflected by the different prevalence of the "clonal complexes" (CCs) in foods or infections. Better understanding of the growth potentials of L. monocytogenes is essential for quantitative risk assessment and efficient detection across CCs genetic diversity. Using optical density measurements taken with an automated spectrophotometer, we compared the maximal growth rate and lag phase of 39 strains from 13 different CCs and various food origins, in 3 broths mimicking stresful food conditions (8 °C, aw 0.95 and pH5) and in ISO Standard enrichment broths (Half Fraser and Fraser). This is important as growth could influence risk through pathogen multiplication in food. Besides, enrichment problems could lead to a lack of detection of some CCs. Despite small differences highlighting natural intraspecific variability, our results show that growth performances of L. monocytogenes strains under the conditions tested in selective and non-selective broth do not appear to be strongly correlated to CCs and cannot explain higher CC "virulence" or prevalence.
Subject(s)
Listeria monocytogenes , Listeria monocytogenes/genetics , Multilocus Sequence Typing , Food Microbiology , Sequence Analysis, DNA , Genetic VariationABSTRACT
Clostridium botulinum produces Botulinum neurotoxins (BoNTs), causing a rare but potentially deadly type of food poisoning called foodborne botulism. This review aims to provide information on the bacterium, spores, toxins, and botulisms, and describe the use of physical treatments (e.g., heating, pressure, irradiation, and other emerging technologies) to control this biological hazard in food. As the spores of this bacterium can resist various harsh environmental conditions, such as high temperatures, the thermal inactivation of 12-log of C. botulinum type A spores remains the standard for the commercial sterilization of food products. However, recent advancements in non-thermal physical treatments present an alternative to thermal sterilization with some limitations. Low- (<2 kGy) and medium (3-5 kGy)-dose ionizing irradiations are effective for a log reduction of vegetative cells and spores, respectively; however, very high doses (>10 kGy) are required to inactivate BoNTs. High-pressure processing (HPP), even at 1.5 GPa, does not inactivate the spores and requires heat combination to achieve its goal. Other emerging technologies have also shown some promise against vegetative cells and spores; however, their application to C. botulinum is very limited. Various factors related to bacteria (e.g., vegetative stage, growth conditions, injury status, type of bacteria, etc.) food matrix (e.g., compositions, state, pH, temperature, aw, etc.), and the method (e.g., power, energy, frequency, distance from the source to target, etc.) influence the efficacy of these treatments against C. botulinum. Moreover, the mode of action of different physical technologies is different, which provides an opportunity to combine different physical treatment methods in order to achieve additive and/or synergistic effects. This review is intended to guide the decision-makers, researchers, and educators in using physical treatments to control C. botulinum hazards.
ABSTRACT
Botulism is a human and animal neurological disease caused by the action of bacterial neurotoxins (botulinum toxins) produced by bacteria from the genus Clostridium. This disease induces flaccid paralysis that can result in respiratory paralysis and heart failure. Due to its serious potential impact on public health, botulism is a closely monitored notifiable disease in France through a case-based passive surveillance system. In humans, this disease is rare, with an average of 10 outbreaks reported each year, mainly due to the consumption of contaminated foods. Type B and to a lesser extend type A are responsible for the majority of cases of foodborne botulism. Each year, an average of 30 outbreaks are recorded on poultry farms, about 20 cases in wild birds and about 10 outbreaks in cattle, involving a large number of animals. Mosaic forms C/D and D/C in birds and cattle, respectively, are the predominant types in animals in France. Types C and D have also been observed to a lesser extent in animals. With the exception of botulinum toxin E, which was exceptionally detected throughout the period in wild birds, the types of botulism found in animal outbreaks are different from those identified in human outbreaks over the last ten years in France and no human botulism outbreaks investigated have been linked to animal botulism. In line with the One Health concept, we present the first integrative approach to the routine surveillance of botulism in humans and animals in France.
Subject(s)
Disease Outbreaks , One Health , Humans , Animals , Cattle , Disease Outbreaks/veterinary , France/epidemiology , Public HealthABSTRACT
Monkeypox (MPX) is a zoonotic infectious disease caused by Monkeypox virus (MPXV), an enveloped DNA virus belonging to the Poxviridae family and the Orthopoxvirus genus. Since early May 2022, a growing number of human cases of Monkeypox have been reported in non-endemic countries, with no history of contact with animals imported from endemic and enzootic areas, or travel to an area where the virus usually circulated before May 2022. This qualitative risk assessment aimed to investigate the probability that MPXV transmission occurs through food during its handling and consumption. The risk assessment used "top-down" (based on epidemiological data) and "bottom-up" (following the agent through the food chain to assess the risk of foodborne transmission to human) approaches, which were combined. The "top-down" approach first concluded that bushmeat was the only food suspected as a source of contamination in recorded cases of MPXV, by contact or ingestion. The "bottom-up" approach then evaluated the chain of events required for a human to become ill after handling or consuming food. This approach involves several conditions: (i) the food must be contaminated with MPXV (naturally, by an infected handler or after contact with a contaminated surface); (ii) the food must contain viable virus when it reaches the handler or consumer; (iii) the person must be exposed to the virus and; (iv) the person must be infected after exposure. Throughout the risk assessment, some data gaps were identified and highlighted. The conclusions of the top-down and bottom-up approaches are consistent and suggest that the risk of transmission of MPXV through food is hypothetical and that such an occurrence was never reported. In case of contamination, cooking (e.g., 12 min at 70°C) could be considered effective in inactivating Poxviridae in foods. Recommendations for risk management are proposed. To our knowledge, this is the first risk assessment performed on foodborne transmission of MPXV.
ABSTRACT
SARS-CoV-2 (Severe acute respiratory syndrome coronavirus 2), a virus causing severe acute respiratory disease in humans, emerged in late 2019. This respiratory virus can spread via aerosols, fomites, contaminated hands or surfaces as for other coronaviruses. Studying their persistence under different environmental conditions represents a key step for better understanding the virus transmission. This work aimed to present a reproducible procedure for collecting data of stability and inactivation kinetics from the scientific literature. The aim was to identify data useful for characterizing the persistence of viruses in the food production plants. As a result, a large dataset related to persistence on matrices or in liquid media under different environmental conditions is presented. This procedure, combining bibliographic survey, data digitalization techniques and predictive microbiological modelling, identified 65 research articles providing 455 coronaviruses kinetics. A ranking step as well as a technical validation with a Gage Repeatability & Reproducibility process were performed to check the quality of the kinetics. All data were deposited in public repositories for future uses by other researchers.
Subject(s)
COVID-19 , SARS-CoV-2 , Humans , Food Handling , Kinetics , Plants, Edible , Reproducibility of Results , Databases, FactualABSTRACT
In complex food systems, bacteria live in heterogeneous microstructures, and the population displays phenotypic heterogeneities at the single-cell level. This review provides an overview of spatiotemporal drivers of phenotypic heterogeneity of bacterial pathogens in food matrices at three levels. The first level is the genotypic heterogeneity due to the possibility for various strains of a given species to contaminate food, each of them having specific genetic features. Then, physiological heterogeneities are induced within the same strain, due to specific microenvironments and heterogeneous adaptative responses to the food microstructure. The third level of phenotypic heterogeneity is related to cellular heterogeneity of the same strain in a specific microenvironment. Finally, we consider how these phenotypic heterogeneities at the single-cell level could be implemented in mathematical models to predict bacterial behavior and help ensure microbiological food safety.
Subject(s)
Food Microbiology , Food Safety , BacteriaABSTRACT
From a historically rare serotype, Salmonella enterica subsp. enterica Dublin slowly became one of the most prevalent Salmonella in cattle and raw milk cheese in some regions of France. We present a retrospective genomic analysis of 480 S. Dublin isolates to address the context, evolutionary dynamics, local diversity and the genesis processes of regional S. Dublin outbreaks events between 2015 and 2017. Samples were clustered and assessed for correlation against metadata including isolation date, isolation matrices, geographical origin and epidemiological hypotheses. Significant findings can be drawn from this work. We found that the geographical distance was a major factor explaining genetic groups in the early stages of the cheese production processes (animals, farms) while down-the-line transformation steps were more likely to host genomic diversity. This supports the hypothesis of a generalised local persistence of strains from animal to finished products, with occasional migration. We also observed that the bacterial surveillance is representative of diversity, while targeted investigations without genomics evidence often included unrelated isolates. Combining both approaches in phylogeography methods allows a better representation of the dynamics, of outbreaks.
ABSTRACT
In response to the massive use of biocides for controlling Listeria monocytogenes (hereafter Lm) contaminations along the food chain, strains showing biocide tolerance emerged. Here, accessory genomic elements were associated with biocide tolerance through pangenome-wide associations performed on 197 Lm strains from different lineages, ecological, geographical and temporal origins. Mobile elements, including prophage-related loci, the Tn6188_qacH transposon and pLMST6_emrC plasmid, were widespread across lineage I and II food strains and associated with tolerance to benzalkonium-chloride (BC), a quaternary ammonium compound (QAC) widely used in food processing. The pLMST6_emrC was also associated with tolerance to another QAC, the didecyldimethylammonium-chloride, displaying a pleiotropic effect. While no associations were detected for chemically reactive biocides (alcohols and chlorines), genes encoding for cell-surface proteins were associated with BC or polymeric biguanide tolerance. The latter was restricted to lineage I strains from animal and the environment. In conclusion, different genetic markers, with polygenic nature or not, appear to have driven the Lm adaptation to biocide, especially in food strains but also from animal and the environment. These markers could aid to monitor and predict the spread of biocide tolerant Lm genotypes across different ecological niches, finally reducing the risk of such strains in food industrial settings.
Subject(s)
Disinfectants , Listeria monocytogenes , Animals , Benzalkonium Compounds/pharmacology , Chlorides , Disinfectants/pharmacology , Drug Resistance, Bacterial/genetics , Ecosystem , GenomicsABSTRACT
Listeria monocytogenes (Lm) is a ubiquitous bacterium that causes the serious foodborne illness listeriosis. Although soil is a primary reservoir and a central habitat for Lm, little information is available on the genetic features underlying the fitness of Lm strains in this complex habitat. The aim of this study was to identify (i) correlations between the strains fitness in soil, their origin and their phylogenetic position (ii) identify genetic markers allowing Lm to survive in the soil. To this end, we assembled a balanced panel of 216 Lm strains isolated from three major ecological compartments (outdoor environment, animal hosts, and food) and from 33 clonal complexes occurring worldwide. The ability of the 216 strains to survive in soil was tested phenotypically. Hierarchical clustering identified three phenotypic groups according to the survival rate (SR): phenotype 1 "poor survivors" (SR < 2%), phenotype 2 "moderate survivors" (2% < SR < 5%) and phenotype 3 "good survivors" (SR > 5%). Survival in soil depended neither on strains' origin nor on their phylogenetic position. Genome-wide-association studies demonstrated that a greater number of genes specifically associated with a good survival in soil was found in lineage II strains (57 genes) than in lineage I strains (28 genes). Soil fitness was mainly associated with variations in genes (i) coding membrane proteins, transcription regulators, and stress resistance genes in both lineages (ii) coding proteins related to motility and (iii) of the category "phage-related genes." The cumulative effect of these small genomic variations resulted in significant increase of soil fitness.
ABSTRACT
Listeria monocytogenes (Lm) is a ubiquitous bacterium that causes listeriosis, a serious foodborne illness. In the nature-to-human transmission route, Lm can prosper in various ecological niches. Soil and decaying organic matter are its primary reservoirs. Certain clonal complexes (CCs) are over-represented in food production and represent a challenge to food safety. To gain new understanding of Lm adaptation mechanisms in food, the genetic background of strains found in animals and environment should be investigated in comparison to that of food strains. Twenty-one partners, including food, environment, veterinary and public health laboratories, constructed a dataset of 1484 genomes originating from Lm strains collected in 19 European countries. This dataset encompasses a large number of CCs occurring worldwide, covers many diverse habitats and is balanced between ecological compartments and geographic regions. The dataset presented here will contribute to improve our understanding of Lm ecology and should aid in the surveillance of Lm. This dataset provides a basis for the discovery of the genetic traits underlying Lm adaptation to different ecological niches.