ABSTRACT
This paper investigates the solar evacuated tube heat pipe system (SETHP) coupled with a thermoelectric generator (TEG) using the internet of things (IoT). The TEGs convert heat energy into electricity through the Seebeck effect that finds application in the waste heat recovery process for the generation of power. The present work deals with the theoretical study on solar evacuated tube heat pipe integrated TEG and it is validated experimentally using with and without parabolic trough concentrating collector. However, it is found that the maximum power output due to the influence of the parabolic trough concentrator results in increased efficiency when compared with the non-concentrating SETHP-TEG system. Thus, the thermoelectric generator's electrical energy efficiency for the concentrating system was 0.151% greater than the latter one. A power electronic boost converter may enhance the acquired TEG output power to a maximum of 5.98 V. This would be directly used for both mobile charging and lighting applications in distant places and military camps where the community lacks sufficient electrical access. And the carbon credit of the TEG system is determined to find its potential in the environmental aspects of carbon emission per watt, carbon mitigation, and carbon credit and its results are 2.34 × 10-3 g/W, 0.027 tonnes, and 0.681 dollars respectively for a TEG module. Besides, the recorded real sensor data with Arduino is implemented in the experimental process for automatic remote monitoring of the temperature.
