Alveolar ridge preservation of two-wall bone defects using mineralized dentin matrix: An experimental pre-clinical study.

OBJECTIVES: To study bone healing of two-wall bone defects after alveolar ridge preservation using mineralized dentin matrix. MATERIALS AND METHODS: After distal roots extraction of second and fourth premolars (P2, P4) on one lateral mandible in 12 beagles, two-wall bone defects (5 × 5 × 5 mm) were surgically created distally to the remaining mesial roots of P2 and P4. A total of 24 sites were randomly allocated to three groups (implant material- time of execution): mineralized dentin matrix (MDM)-3 m (MDM + collagen membrane; 3 months), MDM-6 m (MDM particles + collagen membrane; 6 months), and C-6 m (collagen membrane only; 6 months). Clinical, radiographic, digital, and histological examinations were performed 3 and 6 months after surgery. RESULTS: The bone healing in MDM groups were better compared to Control group (volume of bone regenerated in total: 25.12 mm3 vs. 13.30 mm3, p = .046; trabecular volume/total volume: 58.84% vs. 39.18%, p = .001; new bone formation rate: 44.13% vs. 31.88%, p = .047). Vertically, the radiological bone level of bone defect in MDM-6 m group was higher than that in C-6 m group (vertical height of bone defect: 1.55 mm vs. 2.74 mm, p = .018). Horizontally, no significant differences in buccolingual bone width were found between MDM and C groups at any time or at any level below the alveolar ridge. The percentages of remaining MDM were <1% in both MDM-3 m and MDM-6 m groups. CONCLUSIONS: MDM improved bone healing of two-wall bone defects and might be considered as a socket fill material used following tooth extraction.

Designing customized temporomandibular fossa prosthesis based on envelope surface of condyle movement: validation via in silico musculoskeletal simulation.

Objective: This study presents an innovative articular fossa prosthesis generated by the envelope surface of condyle movement, and compares its mandible movements, muscle activities, and joint reaction forces with two temporomandibular joint (TMJ) prostheses using multibody musculoskeletal simulation. Methods: A healthy 23-year-old female was recruited for this study. Cone-beam computed tomographic (CBCT) was performed to reconstruct the mandibular bone geometry. A customized TMJ fossa prosthesis was designed based on the subject-specific envelope surface of condyle movement (ESCM). Mandibular kinematics and jaw-closing muscle electromyography (EMG) were simultaneously recorded during maximum jaw opening-closing movements. To validate our prosthesis design, a mandibular musculoskeletal model was established using flexible multibody dynamics and the obtained kinematics and EMG data. The Biomet fossa prosthesis and the ellipsoidal fossa prosthesis designed by imitating the lower limb prostheses were used for comparison. Simulations were performed to analyze the effects of different fossa prostheses on jaw opening-closing motions, mandibular muscle activation, and contact forces. Results: The maximum opening displacement for the envelope-based fossa prosthesis was greater than those for Biomet and ellipsoidal prostheses (36 mm, 35 mm, and 33 mm, respectively). The mandibular musculoskeletal model with ellipsoidal prosthesis led to dislocation near maximal jaw opening. Compared to Biomet, the envelope-based fossa reduced the digastric and lateral pterygoid activation at maximal jaw opening. It also reduced the maximal resistance to condylar sliding on the intact side by 63.2 N. Conclusion: A customized TMJ fossa prosthesis was successfully developed using the ESCM concept. Our study of musculoskeletal multibody modeling has highlighted its advantages and potential. The artificial fossa design successfully achieved a wider condylar range of motion. It also reduced the activation of jaw opening muscles on the affected side and resistance on the intact side. This study showed that an ESCM-based approach may be useful for optimizing TMJ fossa prostheses design.

Anti-angiogenic drug aggravates the degree of anti-resorptive drug-based medication-related osteonecrosis of the jaw by impairing the proliferation and migration function of gingival fibroblasts.

BACKGROUND: Long-term use of anti-resorptive or anti-angiogenic drugs in cancer patients with odontogenic infections may lead to medication-related osteonecrosis of the jaw (MRONJ). This study investigated whether anti-angiogenic agents aggravate MRONJ occurrence in anti-resorptive-treated patients. METHODS: The clinical stage and jawbone exposure of MRONJ patients caused by different drug regimens were analyzed to ascertain the aggravation effect of anti-angiogenic drugs on anti-resorptive drug-based MRONJ. Next, a periodontitis mice model was established, and tooth extraction was performed after administering anti-resorptive and/or anti-angiogenic drugs; the imaging and histological change of the extraction socket were observed. Moreover, the cell function of gingival fibroblasts was analyzed after the treatment with anti-resorptive and/or anti-angiogenic drugs in order to evaluate their effect on the gingival tissue healing of the extraction socket. RESULTS: Patients treated with anti-angiogenic and anti-resorptive drugs had an advanced clinical stage and a bigger proportion of necrotic jawbone exposure compared to patients treated with anti-resorptive drugs alone. In vivo study further indicated a greater loss of mucosa tissue coverage above the tooth extraction in mice treated with sunitinib (Suti) + zoledronate (Zole) group (7/10) vs. Zole group (3/10) and Suti group (1/10). Micro-computed tomography (CT) and histological data showed that the new bone formation in the extraction socket was lower in Suti + Zole and Zole groups vs. Suti and control groups. In vitro data showed that the anti-angiogenic drugs had a stronger inhibitory ability on the proliferation and migration function of gingival fibroblasts than anti-resorptive drugs, and the inhibitory effect was obviously enhanced after combining zoledronate and sunitinib. CONCLUSION: Our findings provided support for a synergistic contribution of anti-angiogenic drugs to anti-resorptive drugs-based MRONJ. Importantly, the present study revealed that anti-angiogenic drugs alone do not induce severe MRONJ but aggravate the degree of MRONJ via the enhanced inhibitory function of gingival fibroblasts based on anti-resorptive drugs.

Endoscopic visualization of the inferior alveolar nerve associated with somatosensory changes after impacted mandibular third molar extraction.

The aim of this study is to assess the relationship between somatosensory functional changes and inferior alveolar nerve (IAN) exposure after impacted mandibular third molars (M3M) removal. We recruited 35 patients who underwent impacted M3M extraction near the IAN. The M3Ms were extracted by combined endoscopy, piezosurgery, and contra-angle high-speed turbine handpiece. All IAN canal perforations and exposed regions were recorded and measured by endoscopy after extraction and on cone-beam computed tomography (CBCT) images before extraction. The patients were followed up 1, 7, and 35 days after surgery. A standardized quantitative sensory testing (QST) battery was performed on the lower lip skin. All of 35 cases had exposed IAN on CBCT images, 5 of which had no exposed IAN under endoscopy. For the other 30 cases, the endoscopy-measured IAN length and width were shorter than the CBCT measurements (P < 0.001). The warm and mechanical detection thresholds (MDT) on the operation side were significantly higher than the contralateral side after surgery (P < 0.05). Thermal sensory limen, MDT, and cold pain threshold were strongly correlated with the exposed IAN length and MDT also with the exposed IAN width one day after surgery. In conclusion, it was found that not all exposed IAN in CBCT images were real exposure after surgery. The intraoperative exposed IAN endoscopic measurements were smaller than by CBCT and strongly correlated with some QST parameters.

Vascularized Free Fibular Flap in Oral and Maxillofacial Reconstruction: A 20-year Experience at a Single Institution Using 2640 Flaps.

BACKGROUND: This retrospective study reviewed all patients who underwent oral and maxillofacial reconstruction with fibular flaps in the last 2 decades at a single hospital. MATERIALS AND METHODS: We reviewed all patients with fibular flaps from 1999 to 2018. The following data were collected: sex; age; reconstruction region; diagnosis; the number of days spent in the hospital after surgery; time spent using a tourniquet for harvesting a fibula flap; vessels at the recipient site; the prevalence of unplanned reoperations; the prevalence of flap failure; history of preoperative radiotherapy; virtual surgical planning; segments of the fibula. RESULTS: In total, 2640 patients were included. The mean age was 45.5 years. The most prevalent region of reconstruction was the mandible (n=2347, 88.9%). The most common diagnosis was squamous cell carcinoma (n=1057, 40.0%). The mean number of days spent in the hospital after surgery decreased year-by-year from 18.3 days to 10.4 days. The first choice of recipient artery was the facial artery (n=1643, 62.2%) and that of the recipient vein was the external jugular vein (n=1196, 45.3%). The prevalence of surgical success was 97.6%. Prevalence of unplanned reoperations was 7.5%. CONCLUSIONS: The fibular flap was a good choice for oral and maxillofacial bony reconstruction in most cases.

Long-term result of 125 I seed brachytherapy for pediatric desmoid tumor in the head and neck.

BACKGROUND: Desmoid tumor (DT) is rare and challenging, often affects the head and neck (HN) region in children, and its appropriate treatments are under-discussed. This study aimed to retrospectively evaluate the long-term effectiveness and safety of 125 I seed brachytherapy for pediatric DT in HN. PROCEDURE: Seven pediatric patients with a median age of three years who suffered from DT in HN treated with 125 I brachytherapy from January 2008 to June 2018 were included. Among these, five underwent sole brachytherapy and the others combined with surgery under prescription doses ranging from 10,000 to 12,000 cGy. The rate of local control (LC), complete response (CR), and partial response (PR) was calculated after evaluation by radiological and pathological means. Radiation-associated toxicities were also evaluated. RESULTS: The LC rate was 7/7 during the follow-up time ranging from 43 to 135 months and with a mean of 57 months. No recurrent lesion was found in the patients receiving surgery combined with brachytherapy. In patients treated with sole brachytherapy, the radiological PR rate and CR rate were 4/5 and 1/5, respectively. In those reaching radiological PR, 3/4 were pathological CR. Slight acute radiation-associated toxicities were observed in all patients, and no late or severe acute toxicity was observed. CONCLUSION: 125 I brachytherapy is effective and safe in the management of pediatric DT in HN as the sole modality or combined with surgery in the long term.

Comparative Study of Temporomandibular Articular Fossa Bone Surface and the Envelope Surface of the Condyle Movement.

OBJECTIVE: To investigate the differences between temporomandibular articular fossa bone surface and the envelope surface of the mandibular condyle movement. METHODS: Thirty-four healthy adults underwent skull base and mandible scans using CBCT and performed mandibular border movement using the mandibular movement recording system. Landmarks of the fossa and tubercle were indicated and distance and angle parameters were measured on the 3D models reconstructed from the CBCT. The condyle movement envelope surfaces were formed according to models reconstructed from CBCT and the mandibular movement trajectory using computer simulation. The highest and lowest points of the envelope surface were indicated to create parameters. The data were analysed using a paired t test in SPSS (version 24.0, IBM, Armonk, NY, USA). RESULTS: The mandibular fossa bone surface was statistically different to the envelope surface for the height of the first peak of the envelope surface (3.280 ± 1.319 mm) and depth of the mandibular fossa (6.338 ± 2.389 mm) (the ratio was 51.75%), the height of the second peak of the envelope surface (1.463 ± 0.745 mm) and the height of the tubercle (2.000 ± 0.968 mm) (the ratio was 73.15%), and the downwards angle of the envelope surface (25.933 ± 7.539 degrees) and the posterior slope angle of the articular tubercle (35.059 ± 5.224 degrees) (the ratio was 73.97%). CONCLUSION: The downwards angle of the envelope surface was statistically significantly smaller than the posterior slope angle of the articular tubercle, suggesting that the condyle movement is flatter than the mandibular fossa bone surface.

Feasibility and Efficacy of a Degradable Magnesium-Alloy GBR Membrane for Bone Augmentation in a Distal Bone-Defect Model in Beagle Dogs.

We explored the feasibility and efficacy of a degradable magnesium (Mg) alloy guided bone regeneration (GBR) in the treatment of bone defects after tooth extraction. A GBR membrane (MAR-Gide (MG)) was used to treat a mandibular second molar (M2M)-distal bone defect (DBD). In eight beagle dogs, bilateral mandibular second and fourth premolars were hemi-sected. The distal roots were removed to create a two-wall bony defect of dimension 5 mm × 5 mm × 5 mm to simulate M2M-DBD. Thirty-two bone defects were assigned randomly into four groups according to GBR membranes (MG and Bio-Gide (BG)) applied and the time of killing (3 months and 6 months after surgery). The osteogenesis of bone defects and MG degradation were analyzed using micro-CT, histology (staining, tartrate-resistant acid phosphatase), and inductively coupled plasma mass spectrometry. MG did not increase the prevalence of infection, wound dehiscence, or subcutaneous emphysema compared with those using BG. Trabecular volume/total volume at 3 months (63.71 ± 10.4% vs. 59.97 ± 8.94%) was significantly higher in the group MG than that in the group BG. Implanted MG was degraded completely within 3 months, and "island-shaped" new bone was found near MG degradation products. A significant difference was not found in vertical bone height or percent of new bone formation (45.44 ± 12.28% vs. 43.49 ± 7.12%) between the groups. The concentration of rare-earth elements in mandibular lymph nodes of the group MG was significantly higher than that of the group BG (P ≤ 0.017) but did not lead to histopathological changes. In summary, MG exhibited good biocompatibility and clinical applicability compared with BG in vivo. The osteogenic effect of MG could be enhanced by regulating the degradation rate of Mg-alloy.

Reconstruction of Complete Bilateral Maxillary Defects With Free Flaps.

ABSTRACT: Reconstruction of complete bilateral maxillary defects (CBMDs) can be challenging due to the extensive loss of bone and soft tissues. This is a retrospective case series of 46 consecutive patients with CBMDs that were reconstructed with different micro-vascular free flaps. The authors aimed to evaluate the surgical outcomes and discuss the different reconstruction options in this case series. Thirty-six patients underwent reconstruction following ablation surgery for malignant tumors, 6 for benign tumors, 3 patients were treated for osteomyelitis, and 1 patient underwent free flap reconstruction for posttraumatic defects. Free fibula flap (n = 26) is the most commonly used reconstruction method in this case series, which was used in all defect types. This is followed by anterolateral thigh flap (n = 10), 5 rectus abdominis myocutaneous free flap, 3 radial forearm free flaps, and 2 composite free flaps. In this series, 44 free flaps survived, whereas only 2 flaps were lost. All patients could resume a soft diet postoperatively. Reconstruction of CBMDs with vascularized free flaps is a safe and reliable procedure.

Navigation in bone-impacted premaxillary supernumerary tooth removal: a preliminary clinical trial.

AIM: The present clinical trial aimed to preliminarily assess whether navigation could help to position impacted supernumerary teeth (STs) and reduce surgical trauma. MATERIALS AND METHODS: Subjects with an impacted supernumerary tooth (ST) in the premaxillary area were enrolled in the study and randomly distributed into a navigation group and a control group. In the navigation group, STs were positioned and extracted under real-time optic navigation. In the control group, STs were extracted depending on the surgeon's experience. Subjects were followed up for 12 to 24 weeks postsurgery. Operating time, futile bony trauma, and the positioning precision of the STs were the major outcomes assessed. Multivariate correlation analysis was performed. RESULTS: In 24 subjects, 32 STs were removed and no severe complications occurred in either group. The proportion of ST exposure at the planned access point was 100% in the navigation group and 68.75% in the control group (χ² = 5.926, P = 0.015). Futile length, futile width, and the distance between the point where the ST was initially exposed and the bony point planned for accessing it were related to both navigation/control grouping and bone thickness in the access side. For challenging STs with bone thickness of > 0.5 mm in the access side (N = 22), the futile length in the navigation group (0.0 [0.0, 4.0] mm) was significantly smaller than that in the control group (3.0 [0.0, 8.0] mm, P = 0.028). Similarly, the futile width in the navigation group (0.0 [0.0, 2.0] mm) was significantly smaller than that in the control group (2.0 [0.0, 4.0] mm, P = 0.018). CONCLUSIONS: Navigation helped to position impacted STs precisely and reduced surgical bony trauma to some extent, especially in challenging cases in which the bone in the access side was thicker than 0.5 mm.

Long-term Effect of Individualized Titanium Mesh in Orbital Floor Reconstruction After Maxillectomy.

OBJECTIVE: The aim of this study was to determine the clinical outcomes and long-term stability of individualized titanium mesh combined with free flap for orbital floor reconstruction after maxillectomy and to identify the risk factors for titanium mesh exposure. MATERIAL AND METHODS: The data of 66 patients who underwent maxillectomy and orbital floor defect reconstruction by individualized titanium mesh in Peking University School and Hospital of Stomatology between 2011 and 2019 were retrospectively reviewed. Postoperative ophthalmic function and success of aesthetic restoration were assessed. Titanium mesh exposure was recorded and the risk factors were identified. RESULTS: Mean follow-up was for 24.8 months (range, 6-92 months). Ophthalmic function was successfully restored in 63/66 patients. Aesthetic restoration was not considered satisfactory by 10 patients. Titanium mesh exposure occurred in six patients (exposure rate, 9.1%). Preoperative radiotherapy was identified as an independent risk factor for mesh exposure (OR = 28.8, P = 0.006). Previous surgery, postoperative radiotherapy, pathological type of the primary lesion, the type of tissue flap applied, and the use of intraoperative navigation were not significant risk factors. Six patients with titanium mesh exposure underwent second surgery, but mesh exposure recurred in two patients due to insufficient soft tissue coverage. CONCLUSION: Individualized titanium mesh with free flap can effectively restore maxilla-orbital defects. Preoperative radiotherapy is an independent predictor of postoperative titanium mesh exposure. Adequate soft tissue coverage of the mesh may reduce the risk of mesh exposure. LEVEL OF EVIDENCE: 4 (case-control study) Laryngoscope, 131:2231-2237, 2021.

Improved procedure for Brown's Class III maxillary reconstruction with composite deep circumflex iliac artery flap using computer-assisted technique.

Reconstruction of Brown's Class III maxillary defect can be challenging due to the complex geometry of maxilla. We aimed to introduce an improved method for maxillary reconstruction with a composite deep circumflex iliac artery (DCIA) flap aided by virtual surgical planning and intraoperative navigation. A 27-year-old woman diagnosed with left maxillary fibromyxoma was admitted to our institution in December 2018. Pre-operative facial and iliac computed tomography data were obtained for virtual surgical planning. Personalized cutting template, tooth-supported surgical guide, and rapid prototype model with reconstructed orbital floor were printed for pre-operative preparation. Surgery was completely guided by the intraoperative navigation system. The root mean square estimate of the reconstructed area was 3.68 mm. The average errors measured on the lateral and medial DCIA segments were 0.61 and 0.85 mm, respectively. Application of virtual surgical planning and intraoperative navigation could potentially enhance the reconstruction outcomes.

Guideline for Quality Control of Powered Polymerisation Activators for Chairside Use.

The irradiance of powered polymerisation activators for chairside use affects composite resin adhesive curing during the restorative process, whereas radiant accumulated temperature rise relates to clinical safety. Irradiance reduction and high radiant accumulated temperature will compromise the treatment results as there is a lack of curing output efficacy and safety awareness for powered polymerisation activators. Insufficient attention has been paid to the activator's quality control, irradiance attenuation and radiant accumulated temperature excessive temperature rise during its lifetime. The present manuscript has been drafted by the Society of Dental Equipment, Chinese Stomatological Association to fill the quality control gap and guide the quality control process, following tested steps, using a metered radiometer and a thermometer to record the irradiance and radiant accumulated temperature separately. The testing result may indicate the equipment's situation in service and provide information about the irradiance values and performance of the powered polymerisation activator for its usage and maintenance.

Preventive and Control Measures for the Coronavirus Pandemic in Clinical Dentistry.

A severe public health crisis has been declared worldwide since coronavirus disease 2019 (COVID-19) was classified as a pandemic of acute respiratory infectious disease by the World Health Organisation (WHO). China has taken strict measures to curb the spread of the disease to save lives, and has managed to control the outbreak. COVID-19 is mainly transmitted through respiratory droplets and close physical contact, so it is challenging to prevent nosocomial infection and possible spread during dental treatment. Since the initial phase of the COVID-19 outbreak, a disease prevention and control strategy based on the new concept of population risk classification and rational use of personal protective equipment has been implemented by the Peking University Hospital of Stomatology. Nosocomial infection prevention and control concepts and measures relating to dental diagnosis and treatment are critically checked in the hospital. Our experiences in handling this situation are shared here and may have wide-ranging implications for infection prevention and control (IPC) for COVID-19 in dental practices worldwide.

Expert Consensus on Procedures and Operations of Navigation-guided Needle Biopsy Techniques for Skull Base Tumours.

Skull base surgery is an interdisciplinary subject. The anatomical structures in the skull base related to oral and maxillofacial surgery include the parapharyngeal space, the pterygopalatine fossa and the infratemporal space. This operative area is one of the most challenging surgical areas in oral and maxillofacial surgery due to its deep site, complex anatomy and high risk. Obtaining pathological information of the tumour preoperatively may help surgeons optimise their treatment plan. Needle biopsy is one of the major minimally invasive techniques that allows preoperative pathological results to be obtained. The navigation technology, which is developing rapidly nowadays, provides a reliable assistance for deep tissue biopsy surgery. Experts from the Society of Oral and Maxillofacial Surgery, Chinese Stomatological Association formulated an expert consensus on the procedures and operations of navigation-guided needle biopsy techniques for skull base tumours, so as to standardise and promote the application and operation of navigation-guided needle biopsy for skull base tumours.

Expert Consensus for the Treatment Algorithm for Navigationassisted Reconstruction of Maxillofacial Deformities.

Deformities of the maxillofacial region following trauma and ablative surgery are devastating and not uncommon. Reconstruction of such defects is a surgically challenging procedure. Conventionally, reconstruction of dental arch defects lacks preoperative customised planning and relies heavily on the surgeon experience to ensure optimum surgical outcomes. The restoration of the dental arch shape and function has taken precedence after an extensive tumour resection surgery, especially in the current age of technological advancement. Thus, personalised and accurate reconstruction of dental arch defects has become a new goal. Computer-assisted surgery, especially navigation-assisted surgery, has gained popularity of late, in reconstructing deformities and restoring facial symmetry, appearance and function in the maxillofacial region. This technology provides a clearer three-dimensional visualisation of the area of interest and its relationship with the adjacent vital structures. Together with preoperative virtual surgical planning, it allows more specific and accurate osteotomies, thus reducing the ischemia and total operating times substantially. The risk of complications is also minimised whilst improving the final surgical outcomes. The use of the intraoperative navigation system and other computer-assisted surgical techniques during surgery can significantly improve the precision of the reconstruction of dental arch deformities, and achieve personalised and functional reconstructive goals while enhancing the quality of life of patients postoperatively. The Society of Oral and Maxillofacial Surgery, Chinese Stomatological Association provides the present professional perspective and treatment protocol for navigation-guided reconstruction of dental arch defects, to allow standardisation of the technique while promoting its application among oral and maxillofacial surgeons.

Expert Consensus on Navigation-guided Unilateral Delayed Zygomatic Fracture Reconstruction Techniques.

The zygoma is located in the medial and lateral parts of the face, supporting the midfacial contour. The forward projection of the zygoma and the zygomatic arch often expose them to injury. Fractures of the zygoma can lead to the displacement of the zygoma and the zygomatic arch, causing facial collapse deformity. For delayed zygomatic fractures, the loss of normal anatomical landmarks caused by the malunion of the fracture lines and remodelling of the bony contour makes it difficult to determine the correct positions of the zygomatic bones. In such cases, ideal and steady outcomes with satisfactory midface symmetry have been difficult to obtain using traditional surgical methods. Nowadays, the application of digital surgical software and surgical navigation helps surgeons to perform accurate preoperative simulations to obtain ideal three-dimensional virtual surgical plans and achieve accurate reduction by intraoperative navigation systems, which increase the accuracy and predictability of fracture reduction outcomes. Experts from the Society of Oral and Maxillofacial Surgery, Chinese Stomatological Association have fully discussed and formulated an expert consensus on navigation-guided unilateral delayed zygomatic fracture reconstruction techniques to standardise the clinical operation procedures and promote the application.

Experience of Diagnosing and Managing Patients in Oral Maxillofacial Surgery during the Prevention and Control Period of the New Coronavirus Pneumonia.

The newly emerged coronavirus disease (COVID-19) is a respiratory disease caused by a novel coronavirus (2019-nCoV) which was first identified in China in December 2019. It is a highly contagious infection that can spread from person to person through close contact and respiratory droplets. The healthcare personnel of the Department of Oral and Maxillofacial Surgery are especially vulnerable to the infection due to their extensive and close exposure to patients' oral and nasal cavities and secretions. As one of the busiest specialised hospitals in the world, the Department of Oral and Maxillofacial Surgery of Peking University School and Hospital of Stomatology summarised the experience with disease prevention and control and clinical recommendations on the examination, diagnosis and treatment processes, clinical management, healthcare personnel protection and disinfection amid the continued spread of the pandemic.