Energetic utilization of corn stalk and elimination of methyl orange in ECMO-like integrated reactor: Co-occurrence of anaerobic digestion and aerobic treatment.

For the simultaneous energetic utilization of corn stalk and azo-dye contaminated wastewater, an ECMO-like integrated reactor was come up to achieve the biogas production and azo-dye degradation during anaerobic digestion (AD). Methyl orange (MO) was selected as the model compound for azo-dye. The ECMO-like reactor included AD main reactor with a spray device and solid-liquid separation components, integrated with an aeration reactor for biogas slurry. Methane yields of corn stalks (100.82 mL/g VS) were highest in the ECMO-like reactor, compared with reactors without aeration. As a stable metabolite, 4-aminobenzenesulfonic acid (4-ABA) was detected in AD, while it was assumed that the metabolites can be further transformed in the ECMO-like reactor (R3), due to the 4-ABA removal efficiency as 92.87 % after 35 days' digestion. Class Alphaproteobacteria and Clostridia were assumed as functional microbes responding to aeration. Overall, this ECMO-like integrated reactor provided a novel biotechnology strategy for agricultural and azo dye waste treatment.

Novel flocking materials as biocarriers in moving bed biofilm reactor for improving simultaneous nitrification and denitrification performance.

Biocarrier is the key factor for the stable operation of moving bed biofilm reactor (MBBR). To achieve efficient simultaneous nitrification and denitrification (SND), this study provided novel flocking materials as biocarriers. The biofilm formation experiment showed that longer flocking carrier was more conducive to biomass accumulation, resulting in greater oxygen uptake rate. The continuous operation results showed that the total nitrogen removal and SND performance of the MBBR with the addition of 5.0 mm flocking carriers reached 52.0 % and 70.5 %, respectively, which were 29.1 % and 33.3 % greater than those of the control. Compared with those in suspended sludge, the extracellular polymeric substances and protein components in the biocarrier were more abundant. Furthermore, the relative abundance of genera related to denitrification and the nitrogen metabolic sequence improved with the addition of the novel flocking biocarriers. This study demonstrated the effectiveness of novel flocking fillers in improving the performance of MBBR.

Simultaneous denitrification enhancement and sludge reduction based on novel suspended carrier modified using activated carbon and magnetite at low carbon/nitrogen ratio.

A novel suspended carrier was prepared by sticking activated carbon (AC) and magnetite (Fe3O4) onto polypropylene slices. Although this carrier could not reverse the decreased denitrification capacity trends under anoxic conditions at an influent carbon/nitrogen (C/N) ratio of 2, it enhanced denitrification by stimulating sludge reduction and accelerating electron transfer to certain extent. The carrier stuck by mixed AC/Fe3O4 exhibited better performance in terms of sludge reduction, extracellular polymeric substances (EPS) secretion, and denitrification than that merely stuck by AC and Fe3O4 at an influent C/N ratio of 2. The carrier stuck by mixed AC/Fe3O4 increased the total nitrogen removal efficiency by 24.6 % ± 12.5 % in a 72-h denitrification batch experiment compared to the common polypropylene carrier. Moreover, the carrier improved EPS secretion and nitrogen metabolism and promoted the growth of Trichococcus and some denitrifying genera. This study provides a reference for the treatment of low C/N ratio sewage.

Use of magnetic powder to effectively improve the denitrification employing the activated sludge fermentation liquid as carbon source.

Nitrogen removal is often limited in municipal wastewater treatment due to the lack of sufficient carbon source. Utilizing volatile fatty acids (VFAs) from waste activated sludge (WAS) fermentation broth as a carbon source is an ideal alternative to reduce the cost for wastewater treatment plants (WWTPs) and improve denitrification efficiency simultaneously. In this study, an anaerobic system was applied for simultaneous denitrification and WAS fermentation and the addition of magnetic microparticles (MMP) were confirmed to enhance both denitrification and WAS fermentation. Firstly, the addition of MMP increased the nitrate reduction rate by over 25.36% and improve the production of N2. Additionally, the equivalent chemical oxygen demand (COD) of the detected VFAs increased by 7.06%-14.53%, suggesting that MMP promoted the WAS fermentation. The electron transfer efficiency of denitrifies was accelerated by MMP via electron-transporting system (ETS) activity and cyclic voltammetry (CV) experiments, which might result in the promotional denitrification and WAS fermentation performance. Furthermore, the high-throughput sequencing displayed that, MMP enriched key microbes capable of degrading the complex organics (Chloroflexi, Synergistota and Spirochaetota) as well as the typical denitrifies (Bacteroidetes_vadinHA17 and Denitratisoma). Therefore, this study provides a novel strategy to realize simultaneous WAS utilization and denitrification for WWTPs.

Characterization of the microbial community and prediction of metabolic functions in an anaerobic/oxic system with magnetic micropolystyrene as a biocarrier.

Polystyrene (PS) and magnetic polystyrene (MPS) materials have been used extensively in wastewater treatment. In this research, a 55-day anaerobic/oxic process was carried out to evaluate the effects of PS and MPS on microorganisms under aerobic and anaerobic conditions. Scanning electron microscopy results revealed differences in the entanglement state of the sludge with the biocarrier due to differences in surface morphology. High-throughput sequencing analysis showed that the microbial communities differed considerably in the presence of PS and MPS addition under both aerobic and anaerobic conditions. The highest abundance and diversity were observed in the PS reactor, with 929 observed species and a PD_whole_tree index of 91.58 under anaerobic conditions. MPS promoted the enrichment of bacteria related to nitrogen recycling such as Nitrospirota which increased from 1.13% in the seeding sludge to 3.48% and 10.07% in the aerobic reactors with PS and MPS, respectively. Moreover, advanced analysis showed that PS inhibited many microbial functions (e.g., protein export, nitrogen metabolism), and MPS alleviated this inhibition. This study provides significant insights into the microbial effects of PS and MPS and may shed light on biocarrier selection in future studies.

Core-Shell Au@Nanoplastics as a Quantitative Tracer to Investigate the Bioaccumulation of Nanoplastics in Freshwater Ecosystems.

Studies on the adverse effects of nanoplastics (NPs, particle diameter <1000 nm) including physical damage, oxidative stress, impaired cell signaling, altered metabolism, developmental defects, and possible genetic damage have intensified in recent years. However, the analytical detection of NPs is still a bottleneck. To overcome this bottleneck and obtain a reliable and quantitative distribution analysis in complex freshwater ecosystems, an easily applicable NP tracer to simulate their fate and behavior is needed. Here, size- and surface charge-tunable core-shell Au@Nanoplastics (Au@NPs) were synthesized to study the environmental fate of NPs in an artificial freshwater system. The Au core enables the quantitative detection of NPs, while the polystyrene shell exhibits NP properties. The Au@NPs showed excellent resistance to environmental factors (e.g., 1% hydrogen peroxide solution, simulating gastric fluid, acids, and alkalis) and high recovery rates (>80%) from seawater, lake water, sewage, waste sludge, soil, and sediment. Both positively and negatively charged NPs significantly inhibited the growth of duckweed (Lemna minor L.) but had little effect on the growth of cyanobacteria (Microcystis aeruginosa). In addition, the accumulation of positively and negatively charged NPs in cyanobacteria occurred in a concentration-dependent manner, with positively charged NPs more easily taken up by cyanobacteria. In contrast, negatively charged NPs were more readily internalized in duckweed. This study developed a model using a core-shell Au@NP tracer to study the environmental fate and behavior of NPs in various complex environmental systems.

From anaerobic digestion to single cell protein synthesis: A promising route beyond biogas utilization.

The accumulation of a large amount of organic solid waste and the lack of sufficient protein supply worldwide are two major challenges caused by rapid population growth. Anaerobic digestion is the main force of organic waste treatment, and the high-value utilization of its products (biogas and digestate) has been widely concerned. These products can be used as nutrients and energy sources for microorganisms such as microalgae, yeast, methane-oxidizing bacteria(MOB), and hydrogen-oxidizing bacteria(HOB) to produce single cell protein(SCP), which contributes to the achievement of sustainable development goals. This new model of energy conversion can construct a bioeconomic cycle from waste to nutritional products, which treats waste without additional carbon emissions and can harvest high-value biomass. Techno-economic analysis shows that the SCP from biogas and digestate has higher profit than biogas electricity generation, and its production cost is lower than the SCP using special raw materials as the substrate. In this review, the case of SCP-rich microorganisms using anaerobic digestion products for growth was investigated. Some of the challenges faced by the process and the latest developments were analyzed, and their potential economic and environmental value was verified.

Effects of size and surface charge on the sedimentation of nanoplastics in freshwater.

The environmental issues caused by nanoplastics (NPs) are increasingly noticeable. Environmental behavior study of the NPs could provide vital information for their environmental impact assessment. However, associations between NPs' inherent properties and their sedimentation behaviors were seldom investigated. In this study, six types of PSNPs (polystyrene nanoplastics) with different charges (positive and negative) and particle sizes (20-50 nm, 150-190 nm and 220-250 nm) were synthesized, and their sedimentations under different environmental factors, (e.g., pH value, ionic strength (IS), electrolyte type and natural organic matter) were investigated. Results displayed that both particle size and surface charge would affect the sedimentation of PSNPs. The maximum sedimentation ratio of 26.48% was obtained in positive charged PSNPs with size of 20-50 nm, while the minimum sedimentation ratio of 1.02% was obtained in negative charged PSNPs with size of 220-250 nm at pH 7.6. The pH value shift (range of 5-10) triggered negligible changes of sedimentation ratio, the average particle size and the Zeta potential. Small size PSNPs (20-50 nm) showed higher sensitivity to IS, electrolyte type and HA condition than large size PSNPs. At high IS value ( [Formula: see text]  = 30 mM or ISNaCl = 100 mM), the sedimentation ratios of the PSNPs all increased differently according to their properties, and the sedimentation promoting effect of CaCl2 was more significant on negative charged PSNPs than positive charged PSNPs. When [Formula: see text] increased from 0.9 to 9 mM, the sedimentation ratios of negative charged PSNPs increased by 0.53%-23.49%, while that of positive charged PSNPs increased by less than 10%. Besides, humic acid (HA) addition (1-10 mg/L) would lead to a stable suspension status for PSNPs in water with different degree and perhaps different mechanism due to their charge characteristics. These results showed new light on influence factor studies of NPs' sedimentation and would be helpful for further knowledge of NPs' environmental behaviors.

Combined disposal of methyl orange and corn straw via stepwise adsorption-biomethanation-composting.

Agriculture wastes have been proved to be the potential adsorbents to remove azo dye from textile wastewater, but the post-treatment of azo dye loaded agriculture waste is generally ignored. A three-step strategy including sequential adsorption-biomethanation-composting was developed to realize the co-processing of azo dye and corn straw (CS). Results showed that CS represented a potential adsorbent to remove methyl orange (MO) from textile wastewater, with the maximum MO adsorption capacity of 10.00 ± 0.46 mg/g, deriving from the Langmuir model. During the biomethanation, CS could serve as electron donor for MO decolorization and substrate for biogas production simultaneously. Though the cumulative methane yield of CS loaded with MO was 11.7 ± 2.28% lower than that of blank CS, almost complete de-colorization of MO could be achieved within 72 h. Composting could achieve the further degradation of aromatic amines (intermediates during the degradation of MO) and decomposition of digestate. After 5 days' composting, 4-aminobenzenesulfonic acid (4-ABA) was not detectable. The germination index (GI) also indicated that the toxicity of aromatic amine was eliminated. The overall utilization strategy gives novel light on the management of agriculture waste and textile wastewater.

Insights into the roles of humic acids in facilitating the anaerobic digestion process.

Humic acids (HAs) are important byproducts of anaerobic digestion (AD), which have complex structures and dynamic electrochemical activities. However, the effects of HAs on AD process were usually misestimated due to the neglect of the in situ generated HAs and the interaction between HAs and metal ions. This study explored the effects of HAs on AD performance using corn straw as typical "clean" substrate (rare in metals content) via commercial HAs (C-HAs) addition and in-situ-generated HAs (In-HAs) removal. Results showed that C-HAs (1 g/L) addition promoted the maximum methane production rate (Rm) by 20.6%, while In-HAs removal decreased the Rm by 42.7%. Meanwhile, C-HAs showed little effect on the acidification of corn straw but increased the Rm during the methanation of ethanol by 41.6%. Both the C-HAs and In-HAs were rich in surface oxygen-containing functional groups, which enabled them to act as electron shuttles and facilitate the syntrophic methanogenesis. HAs also acted in regulation of syntrophic microorganisms. For instance, C-HAs addition enriched the relative abundances of Cloacimonadia, Spirochaetia, Synergistia and Methanosarcina, while the removal of In-HAs reduced the relative abundances of Spirochaetia and Synergistia. In conclusion, HAs addition to the AD process could be a feasible approach to improve methane production by enhancing direct interspecies electron transfer during AD of lignocellulosic biomass.

Enhanced bio-affinity of magnetic QD-P(St-GMA)@Fe3O4 micro-particles via surface-quaternized modification.

In this work, a kind of bio-carrier quaternized-polystyrene-polyglycidyl methacrylate@Fe3O4 (QD-P(St-GMA)@Fe3O4, QD-PSGF) micro-particles was successfully prepared by modifying PSGF micro-particles through a hydrothermal method. The quaternary ammonium group and surface structure of QD-PSGF were confirmed through several characterization methods. We directly verified the efficacy of the quaternary ammonium group in promoting microbial activity due to QD-PSGF being synthesized by a hydrothermal method without changing the surface topography and pore. The bio-affinity of QD-PSGF microspheres was evaluated by bacterial adhesion and anaerobic digestion experiments. The results showed that a little quaternary ammonium group can increase bacterial adhesion by about 2-3 times and methane production by 40%. The novel developed QD-PSGF micro-particles can be a promising material as a biofilm carrier for bio-application.

The degradation of high emulsified oil wastewater in an intermittently-aerated MBBR packed with magnetic polystyrene particles.

This work aims to explore the effects of the magnetic polystyrene particles (MPS) on contaminants removal of the high emulsified oil wastewater. 26 days intermittently-aerated progress illustrated that COD removal efficiency and the resistance to the shock loading was promoted in the presence of MPS. Gas chromatography (GC) results also indicated that MPS enhanced the number of organic species reduced. According to the cyclic voltammetry test, conductive MPS appeared special redox performance which was considered could to facilitate the extracellular electron transfer. Furthermore, MPS dosing accelerated the electron-transporting system (ETS) activity by 24.91% compared the control. Based on the superior performance above, the conductivity of MPS is considered to be responsible for the enhanced organic removal efficiency. Moreover, the high-throughput sequencing displayed that electroactive Cloacibacterium and Acinetobacter accounted for a higher proportion in the MPS reactor. Additionally, Porphyrobacter and Dysgonomonas which were capable of degrading organics were also enriched more by MPS. To sum up, MPS is a promising additive to enhance the organic substances removal for the high emulsified oil wastewater.

Effect of calcium peroxide assisted microwave irradiation pretreatment on humus formation and microbial community in straw and dairy manure composting.

In this study, the effects of four pretreatment methods on the crystallinity of maize straw were compared, and the CaO2 assisted microwave pretreatment was selected for straw and dairy manure composting. The humification and microbial community were investigated. Results showed that the pretreatment increased the initial water-soluble carbon, which favored the microbial activity, and the CO2 release increased by 15.71%. Pretreatment promoted the lignocellulose degradation, with total degradation ratio of 37.06%. The final humic acid content was 11.39 g/kg higher than the control. Spearman correlation analysis indicated that polyphenols and amino acids were significantly related to humus formation. In addition, pretreatment rendered the Firmicutes the most dominant phylum, and increased the metabolic intensity of reducing sugar metabolism, aromatic amino acid biosynthesis and carbon fixation pathways. Redundancy analysis revealed that the dominant genus of Firmicutes was significantly positively correlated with humus, while that of Actinobacteriota was correlated with CO2 release.

Synthesis of zeolite A from fly ash and its application in the slow release of urea.

The study focused on the transformation of coal fly ash to zeolite A (ZA) as a potential carrier for the slow release of urea. After being treated with HCl aqueous solution and NaOH successively, SiO2 and Al2O3 were converted into sodium silicoaluminate. The obtained silicoaluminate was then heated with NaAlO2 in an aqueous NaOH solution at 70-110 °C for 3-18 h and zeolite A was successfully prepared according to the X-ray diffraction measurements. By changing the hydrothermal temperature and time, ZA could reach 237.3 mmol/100 g in maximum cation exchange capacity. ZA impregnated with urea (ZA-U) at a mass ratio of more than 5:1 exhibited slow release of urea and the kinetics release mechanism of ZA-U was proposed. The plant growth test proved that the slow release of urea from ZA-U can promote the growth of maize seedling.

Micro-aeration: an attractive strategy to facilitate anaerobic digestion.

Micro-aeration can facilitate anaerobic digestion (AD) by regulating microbial communities and promoting the growth of facultative taxa, thereby increasing methane yield and stabilizing the AD process. Additionally, micro-aeration contributes to hydrogen sulfide stripping by oxidization to produce molecular sulfur or sulfuric acid. Although micro-aeration can positively affect AD, it must be strictly regulated to maintain an overall anaerobic environment that permits anaerobic microorganisms to thrive. Even so, obligate anaerobes, especially methanogens, could suffer from oxidative stress during micro-aeration. This review describes the applications of micro-aeration in AD and examines the cutting-edge advances in how methanogens survive under oxygen stress. Moreover, barriers and corresponding solutions are proposed to move micro-aeration technology closer to application at scale.

Improved fertilization efficiency of manure compost obtained by using oil shale semicoke as the bulking agent.

Oil shale semicoke is a kind of solid waste produced during the retorting process of oil shale, which could cause environmental pollution without reasonable disposing. In our previous study, the abandoned semicoke was recycled as bulking agent to reduce the nitrogen loss and greenhouse gases emission during composting. But influences of the obtained semicoke-blended compost on soil properties and plant growth remained unclear, which would be discussed in this study. Through leaching experiments, it was found that the N/P/K retention capacity of soil mixed with semicoke-blended compost significantly increased for the good nutrients sorption capacity of oil shale semicoke. Subsequently, germination test showed the germination index of semicoke-blended compost could attain 120%, implying its low phytotoxicity. And pot experiments exhibited the biomass of cress and Brassica rapa significantly increased by 2-4 times when applying semicoke-blended compost as fertilizer, exhibiting its great benefits to plants. For the increase of crop yield, it was closely related to their elevated nutrients uptake efficiency, also might be related to the improved soil microbial community and activity as the microbial analysis indicated. Finally, results of pollutant detection showed the concentration of polycyclic aromatic hydrocarbons, Cr, As, Cd and Pb in the mature semicoke-blended compost obtained through composting was 2.82, 95.30, 5.95, 0.34 and 14.45 mg kg-1 respectively, meeting the standard for soil application. The research suggests composting could be an effective method for the harmless disposing and resource recycling of oil shale semicoke waste.

Enhancement of biological nitrogen removal performance from low C/N municipal wastewater using novel carriers based on the nano-Fe3O4.

The aim of this work was to study the effects of the magnetic microparticles (MMP) on nitrogen removal under low C/N conditions. A 30-day anaerobic/oxic progress illustrated that nitrification and denitrification were promoted in the presence of MMP. MMP could facilitate the production of extracellular polymeric substances (EPS) and act as pH buffering in aerobic conditions. The high-throughput sequencing displayed that, compared with the sludge without MMP, the relative abundance of Dokdonella and Comamonas which are capable of both nitrifying and denitrifying were 8.7% and 1.29% higher in anaerobic sludge and 7.11% and 0.97% higher in aerobic sludge with MMP, respectively. The relative abundance of Pseudomonas with the excellent capability of EPS secretion was also observed 4.33 times higher than that without MMP in the aerobic sludge. Based on the superior performance above, MMP is a promising additive to enhance nitrogen removal efficiency for low C/N wastewater.

Understanding the mechanisms behind enhanced anaerobic digestion of corn straw by humic acids.

Humic acids (HAs) are abundant on earth, yet their effects on anaerobic digestion (AD) of cellulosic substrate are not fully uncovered. The effects of HAs on AD of corn straw and the mechanisms behind were analyzed in this study. Results showed that the effects of HAs on methane yield were closely related to the total solids (TS) content. At relative high TS content of 5.0%, HAs benefited AD process by increasing 13.8% of methane yield, accelerating methane production rate by 43% and shortening lag phase time by 37.5%. Microbial community analysis indicated that HAs increased the relative abundance of syntrophic bacteria (Syntrophomonadaceae and Synergistaceae), facilitating the degradation of volatile fatty acids. HAs might act as electron shuttles to directly transfer electrons to hydrogenotrophic methanogens for CO2 reduction to CH4. This study provides a simple and efficient strategy to facilitate the AD of cellulosic substrate by HAs addition.

Synthesis of cellulose-based superabsorbent hydrogel with high salt tolerance for soil conditioning.

In this study, cellulose-based superabsorbent hydrogel was synthesized from sodium carboxymethyl cellulose (CMC-Na), acrylic acid (AA), and 2-acrylamido-2-methylpropanesulfonic acid (AMPS) to enhance its water absorbency and salt tolerance for soil-conditioning applications in areas suffering from drought and soil salinization. Superabsorbent hydrogels (SHs) were prepared by CMC-Na and AMPS successfully, using chemical graft technology. Structure, morphology, thermal stability, and water absorbency of SHs were deduced. The cellulose-based hydrogel showed a high salt tolerance that the maximum water absorbency reached 604 and 119% in distilled water and saline water, respectively. The swelling behavior in aqueous solvents indicated that the water absorption of hydrogels was improved with the increasing ratio of CMC-Na. All SHs exhibited adsorption of nitrogen with the maximum adsorption of ammonia nitrogen 30 mg·g-1 and the presence of hydrogels could slow down the loss of nutrients in the soil. This study provided a feasible strategy that AMPS was substituted by CMC-Na to synthesize SHs with strong water absorbency and high salt tolerance which could be efficiently applied in agriculture as a soil conditioner.