New Insights Optimize Landing Strategies to Reduce Lower Limb Injury Risk.

Single-leg landing (SL) is often associated with a high injury risk, especially anterior cruciate ligament (ACL) injuries and lateral ankle sprain. This work investigates the relationship between ankle motion patterns (ankle initial contact angle [AICA] and ankle range of motion [AROM]) and the lower limb injury risk during SL, and proposes an optimized landing strategy that can reduce the injury risk. To more realistically revert and simulate the ACL injury mechanics, we developed a knee musculoskeletal model that reverts the ACL ligament to a nonlinear short-term viscoelastic mechanical mechanism (strain rate-dependent) generated by the dense connective tissue as a function of strain. Sixty healthy male subjects were recruited to collect biomechanics data during SL. The correlation analysis was conducted to explore the relationship between AICA, AROM, and peak vertical ground reaction force (PVGRF), joint total energy dissipation (TED), peak ankle knee hip sagittal moment, peak ankle inversion angle (PAIA), and peak ACL force (PAF). AICA exhibits a negative correlation with PVGRF (r = -0.591) and PAF (r = -0.554), and a positive correlation with TED (r = 0.490) and PAIA (r = 0.502). AROM exhibits a positive correlation with TED (r = 0.687) and PAIA (r = 0.600). The results suggested that the appropriate increases in AICA (30° to 40°) and AROM (50° to 70°) may reduce the lower limb injury risk. This study has the potential to offer novel perspectives on the optimized application of landing strategies, thus giving the crucial theoretical basis for decreasing injury risk.

A new method applied for explaining the landing patterns: Interpretability analysis of machine learning.

As one of many fundamental sports techniques, the landing maneuver is also frequently used in clinical injury screening and diagnosis. However, the landing patterns are different under different constraints, which will cause great difficulties for clinical experts in clinical diagnosis. Machine learning (ML) have been very successful in solving a variety of clinical diagnosis tasks, but they all have the disadvantage of being black boxes and rarely provide and explain useful information about the reasons for making a particular decision. The current work validates the feasibility of applying an explainable ML (XML) model constructed by Layer-wise Relevance Propagation (LRP) for landing pattern recognition in clinical biomechanics. This study collected 560 groups landing data. By incorporating these landing data into the XML model as input signals, the prediction results were interpreted based on the relevance score (RS) derived from LRP. The interpretation obtained from XML was evaluated comprehensively from the statistical perspective based on Statistical Parametric Mapping (SPM) and Effect Size. The RS has excellent statistical characteristics in the interpretation of landing patterns between classes, and also conforms to the clinical characteristics of landing pattern recognition. The current work highlights the applicability of XML methods that can not only satisfy the traditional decision problem between classes, but also largely solve the lack of transparency in landing pattern recognition. We provide a feasible framework for realizing interpretability of ML decision results in landing analysis, providing a methodological reference and solid foundation for future clinical diagnosis and biomechanical analysis.

A new method proposed for realizing human gait pattern recognition: Inspirations for the application of sports and clinical gait analysis.

BACKGROUND: Finding the best subset of gait features among biomechanical variables is considered very important because of its ability to identify relevant sports and clinical gait pattern differences to be explored under specific study conditions. This study proposes a new method of metaheuristic optimization-based selection of optimal gait features, and then investigates how much contribution the selected gait features can achieve in gait pattern recognition. METHODS: Firstly, 800 group gait datasets performed feature extraction to initially eliminate redundant variables. Then, the metaheuristic optimization algorithm model was performed to select the optimal gait feature, and four classification algorithm models were used to recognize the selected gait feature. Meanwhile, the accuracy results were compared with two widely used feature selection methods and previous studies to verify the validity of the new method. Finally, the final selected features were used to reconstruct the data waveform to interpret the biomechanical meaning of the gait feature. RESULTS: The new method finalized 10 optimal gait features (6 ankle-related and 4-related knee features) based on the extracted 36 gait features (85 % variable explanation) by feature extraction. The accuracy in gait pattern recognition among the optimal gait features selected by the new method (99.81 % ± 0.53 %) was significantly higher than that of the feature-based sorting of effect size (94.69 % ± 2.68 %), the sequential forward selection (95.59 % ± 2.38 %), and the results of previous study. The interval between reconstructed waveform-high and reconstructed waveform-low curves based on the selected feature was larger during the whole stance phase. SIGNIFICANCE: The selected gait feature based on the proposed new method (metaheuristic optimization-based selection) has a great contribution to gait pattern recognition. Sports and clinical gait pattern recognition can benefit from population-based metaheuristic optimization techniques. The metaheuristic optimization algorithms are expected to provide a practical and elegant solution for sports and clinical biomechanical feature selection with better economy and accuracy.

Adaptive neuro-fuzzy inference system model driven by the non-negative matrix factorization-extracted muscle synergy patterns to estimate lower limb joint movements.

BACKGROUND AND OBJECTIVE: For patients with movement disorders, the main clinical focus is on exercise rehabilitation to help recover lost motor function, which is achieved by relevant assisted equipment. The basis for seamless control of the assisted equipment is to achieve accurate inference of the user's movement intentions in the human-machine interface. This study proposed a novel movement intention detection technology for estimating lower limb joint continuous kinematic variables following muscle synergy patterns, to develop applications for more efficient assisted rehabilitation training. METHODS: This study recruited 16 healthy males and 16 male patients with symptomatic patellar tendinopathy (VISA-P: 59.1 ± 8.7). The surface electromyography of 12 muscles and lower limb joint kinematic and kinetic data from healthy subjects and patients during step-off landings from 30 cm-high stair steps were collected. We subsequently solved the preprocessed data based on the established recursive model of second-order differential equation to obtain the muscle activation matrix, and then imported it into the non-negative matrix factorization model to obtain the muscle synergy matrix. Finally, the lower limb neuromuscular synergy pattern was then imported into the developed adaptive neuro-fuzzy inference system non-linear regression model to estimate the human movement intention during this movement pattern. RESULTS: Six muscle synergies were determined to construct the muscle synergy pattern driven ANFIS model. Three fuzzy rules were determined in most estimation cases. Combining the results of the four error indicators across the estimated variables indicates that the current model has excellent estimated performance in estimating lower limb joint movement. The estimation errors between the healthy (Angle: R2=0.98±0.03; Torque: R2=0.96±0.04) and patient (Angle: R2=0.98±0.02; Torque: R2=0.96±0.03) groups are consistent. CONCLUSION: The proposed model of this study can accurately and reliably estimate lower limb joint movements, and the effectiveness will also be radiated to the patient group. This revealed that our models also have certain advantages in the recognition of motor intentions in patients with relevant movement disorders. Future work from this study can be focused on sports rehabilitation in the clinical field by achieving more flexible and precise movement control of the lower limb assisted equipment to help the rehabilitation of patients.

Accurately and effectively predict the ACL force: Utilizing biomechanical landing pattern before and after-fatigue.

BACKGROUND AND OBJECTIVE: As a fundamental exercise technique, landing can commonly be associated with anterior cruciate ligament (ACL) injury, especially during after-fatigue single-leg landing (SL). Presently, the inability to accurately detect ACL loading makes it difficult to recognize the risk degree of ACL injury, which reduces the effectiveness of injury prevention and sports monitoring. Increased risk of ACL injury during after-fatigue SL may be related to changes in ankle motion patterns. Therefore, this study aims to develop a highly accurate and easily implemented ACL force prediction model by combining deep learning and the explored relationship between ACL force and ankle motion pattern. METHODS: First, 56 subjects' during before and after-fatigue SL data were collected to explore the relationship between the ankle initial contact angle (AIC), ankle range of motion (AROM) and peak ACL force (PAF). Then, the musculoskeletal model was developed to simulate and calculate the ACL force. Finally, the ACL force prediction model was constructed by combining the explored relationship and sparrow search algorithm (SSA) to optimize the extreme learning machine (ELM) and long short-term memory (LSTM). RESULTS: There was almost a stronger linear relationship between the PAF and AIC (R = -0.70), AROM (R2 = -0.61). By substituting AIC and AROM as independent variables in the SSA-ELM prediction model, the model shows excellent prediction performance because of very strong correlation (R2 = 0.9992,  MSE = 0.0023,  RMSE = 0.0474). Based on the equal scaling by combining results of SSA-ELM and SSA-LSTM, the prediction model achieves excellent performance in ACL force prediction of the overall waveform (R2 = 0.9947,  MSE = 0.0076,  RMSE = 0.0873). CONCLUSION: By increasing the AIC and AROM during SL, the lower limb joint energy dissipation can be increased and the PAF reduced, thus reducing the impact loads on the lower limb joints and reducing ACL injuries. The proposed ACL dynamic load force prediction model has low input variable demands (sagittal joint angles), excellent generalization capabilities and superior performance in terms of high accuracy. In the future, we plan to use it as an accurate ACL injury risk assessment tool to promote and apply it to a wider range of sports training and injury monitoring.

A new method proposed to explore the feline's paw bones of contributing most to landing pattern recognition when landed under different constraints.

Felines are generally acknowledged to have natural athletic ability, especially in jumping and landing. The adage "felines have nine lives" seems applicable when we consider its ability to land safely from heights. Traditional post-processing of finite element analysis (FEA) is usually based on stress distribution trend and maximum stress values, which is often related to the smoothness and morphological characteristics of the finite element model and cannot be used to comprehensively and deeply explore the mechanical mechanism of the bone. Machine learning methods that focus on feature pattern variable analysis have been gradually applied in the field of biomechanics. Therefore, this study investigated the cat forelimb biomechanical characteristics when landing from different heights using FEA and feature engineering techniques for post-processing of FEA. The results suggested that the stress distribution feature of the second, fourth metacarpal, the second, third proximal phalanx are the features that contribute most to landing pattern recognition when cats landed under different constraints. With increments in landing altitude, the variations in landing pattern differences may be a response of the cat's forelimb by adjusting the musculoskeletal structure to reduce the risk of injury with a more optimal landing strategy. The combination of feature engineering techniques can effectively identify the bone's features that contribute most to pattern recognition under different constraints, which is conducive to the grasp of the optimal feature that can reveal intrinsic properties in the field of biomechanics.

Effects of Fatigue Running on Joint Mechanics in Female Runners: A Prediction Study Based on a Partial Least Squares Algorithm.

Background: Joint mechanics are permanently changed using different intensities and running durations. These variations in intensity and duration also influence fatigue during prolonged running. Little is known about the potential interactions between fatigue and joint mechanics in female recreational runners. Thus, the purpose of this study was to describe and examine kinematic and joint mechanical parameters when female recreational runners are subject to fatigue as a result of running. Method: Fifty female recreational runners maintained running on a treadmill to induce fatigue conditions. Joint mechanics, sagittal joint angle, moment, and power were recorded pre- and immediately post fatigue treadmill running. Result: Moderate reductions in absolute positive ankle power, total ankle energy dissipation, dorsiflexion at initial contact, max dorsiflexion angle, and range of motion of the joint ankle were collected after fatigue following prolonged fatigue running. Knee joint mechanics, joint angle, and joint power remained unchanged after prolonged fatigue running. Nevertheless, with the decreased ankle joint work, negative knee power increased. At the hip joint, the extension angle was significantly decreased. The range motion of the hip joint, hip positive work and hip positive power were increased during the post-prolonged fatigue running. Conclusion: This study found no proximal shift in knee joint mechanics in amateur female runners following prolonged fatigue running. The joint work redistribution was associated with running fatigue changes. As for long-distance running, runners should include muscle strength training to avoid the occurrence of running-related injuries.