Cryogenic spray quenching of simulated propellant tank wall using coating and flow pulsing in microgravity.

In-space cryogenic propulsion will play a vital role in NASA's return to the Moon mission and future mission to Mars. The enabling of in-space cryogenic engines and cryogenic fuel depots for these future manned and robotic space exploration missions begins with the technology development of advanced cryogenic thermal-fluid management systems for the propellant transfer lines and storage system. Before single-phase liquid can flow to the engine or spacecraft receiver tank, the connecting transfer line and storage tank must first be chilled down to cryogenic temperatures. The most direct and simplest method to quench the line and the tank is to use the cold propellant itself that results in the requirement of minimizing propellant consumption during chilldown. In view of the needs stated above, a highly efficient thermal-fluid management technology must be developed to consume the minimum amount of cryogen during chilldown of a transfer line and a storage tank. In this paper, we suggest the use of the cryogenic spray for storage tank chilldown. We have successfully demonstrated its feasibility and high efficiency in a simulated space microgravity condition. In order to maximize the storage tank chilldown efficiency for the least amount of cryogen consumption, the technology adopted included cryogenic spray cooling, Teflon thin-film coating of the simulated tank surface, and spray flow pulsing. The completed flight experiments successfully demonstrated that spray cooling is the most efficient cooling method for the tank chilldown in microgravity. In microgravity, Teflon coating alone can improve the efficiency up to 72% and the efficiency can be improved up to 59% by flow pulsing alone. However, Teflon coating together with flow pulsing was found to substantially enhance the chilldown efficiency in microgravity for up to 113%.

An advance in transfer line chilldown heat transfer of cryogenic propellants in microgravity using microfilm coating for enabling deep space exploration.

The extension of human space exploration from a low earth orbit to a high earth orbit, then to Moon, Mars, and possibly asteroids is NASA's biggest challenge for the new millennium. Integral to this mission is the effective, sufficient, and reliable supply of cryogenic propellant fluids. Therefore, highly energy-efficient thermal-fluid management breakthrough concepts to conserve and minimize the cryogen consumption have become the focus of research and development, especially for the deep space mission to mars. Here we introduce such a concept and demonstrate its feasibility in parabolic flights under a simulated space microgravity condition. We show that by coating the inner surface of a cryogenic propellant transfer pipe with low-thermal conductivity microfilms, the quenching efficiency can be increased up to 176% over that of the traditional bare-surface pipe for the thermal management process of chilling down the transfer pipe. To put this into proper perspective, the much higher efficiency translates into a 65% savings in propellant consumption.

Revealing the dynamics of prospective memory processes in children with eye movements.

Prospective memory (PM), the memory for delayed intentions, develops during childhood. The current study examined PM processes, such as monitoring, PM cue identification and intention retrieval with particular focus on their temporal dynamics and interrelations during successful and unsuccessful PM performance. We analysed eye movements of 6-7 and 9-10 year olds during the inspection of movie stills while they completed one of three different tasks: scene viewing followed by a snippet allocation task, a PM task and a visual search task. We also tested children's executive functions of inhibition, flexibility and working memory. We found that older children outperformed younger children in all tasks but neither age group showed variations in monitoring behaviour during the course of the PM task. In fact, neither age group monitored. According to our data, initial processes necessary for PM success take place during the first fixation on the PM cue. In PM hit trials we found prolonged fixations after the first fixation on the PM cue, and older children showed a greater efficiency in PM processes following this first PM cue fixation. Regarding executive functions, only working memory had a significant effect on children's PM performance. Across both age groups children with better working memory scores needed less time to react to the PM cue. Our data support the notion that children rely on spontaneous processes to notice the PM cue, followed by a resource intensive search for the intended action.

Heat transfer enhancement in cryogenic quenching process.

This paper reports a heat transfer advancement in the cryogenic quenching process. An experiment was performed to evaluate the enhancement of quenching heat transfer by the use of metal tubes with low thermal conductivity coating layers. Four coating thicknesses with various coolant mass flow rates of liquid nitrogen were investigated. The results indicated that the tube inner surface coating greatly enhanced the quenching efficiency. The quenching efficiency was found to increase with increasing number of coating layers, and the efficiency also increased with decreasing mass flow rates. In general, the efficiencies cover a range between 40.6% and 80%. Comparing to the bare surface case, the percentage increase in the quenching efficiency was the minimum at 4.2% for a single coated layer at the highest flow rate and the maximum of 109.1% for four coated layers at the lowest flow rate. The coated tubes could save up to 53% in the amount of cryogen consumption.

Perioperative FOLFOX 4 Versus FOLFOX 4 Plus Cetuximab Versus Immediate Surgery for High-Risk Stage II and III Colon Cancers: A Phase II Multicenter Randomized Controlled Trial (PRODIGE 22).

BACKGROUND: Perioperative chemotherapy has proven valuable in several tumors, but not in colon cancer (CC). OBJECTIVE: The aim of this study was to evaluate the efficacy and safety of perioperative chemotherapy in patients with locally advanced nonmetastatic CC. METHODS: This is a French multicenter randomized phase II trial in patients with resectable high-risk T3, T4, and/or N2 CC on baseline computed tomography (CT) scan. Patients were randomized to receive either 6 months of adjuvant FOLFOX after colectomy (control) or perioperative FOLFOX for 4 cycles before surgery and 8 cycles after (FOLFOX peri-op). In RAS wild-type patients, a third arm testing perioperative FOLFOX-cetuximab was added. Tumor Regression Grade (TRG1) of Ryan et al was the primary endpoint. Secondary endpoints were toxicity, perioperative morbidity, and quality of surgery. RESULTS: A total of 120 patients were enrolled. At interim analysis, the FOLFOX-cetuximab arm was stopped (lack of efficacy). The remaining 104 patients (control, n = 52; FOLFOX preop n = 52) represented our intention-to-treat population. In the FOLFOX perioperative group, 96% received the scheduled 4 cycles before surgery. R0 resection and complete mesocolic excision rate were 94% and 93%, respectively. Overall mortality and morbidity rates were similar in both groups. Perioperative FOLFOX chemotherapy did not improve major pathological response rate (TRG1 = 8%) but was associated with a significant pathological regression (TRG1-2 = 44% vs 8%, P < 0.001) and a trend to tumor downstaging as compared to the control group. CT scan criteria were associated with a 33% rate of overstaging in control group. CONCLUSIONS: Perioperative FOLFOX for locally advanced resectable CC is feasible with an acceptable tolerability but is not associated with an increased major pathological response rate as expected. However, perioperative FOLFOX induces pathological regression and downstaging. Better preoperative staging tools are needed to decrease the risk of overtreating patients.

Experimental Effervescence and Freezing Point Depression Measurements of Nitrogen in Liquid Methane-Ethane Mixtures.

NASA is designing an unmanned submarine to explore the depths of the hydrocarbon-rich seas on Saturn's moon Titan. Data from Cassini indicates that the Titan north polar environment sustains stable seas of variable concentrations of ethane, methane, and nitrogen, with a surface temperature near 93 K. The submarine must operate autonomously, study atmosphere/sea exchange, interact with the seabed, hover at the surface or any depth within the sea, and be capable of tolerating variable hydrocarbon compositions. Currently, the main thermal design concern is the effect of effervescence on submarine operation, which affects the ballast system, science instruments, and propellers. Twelve effervescence measurements on various liquid methane-ethane compositions with dissolved gaseous nitrogen are thus presented from 1.5 bar to 4.5 bar at temperatures from 92 K to 96 K to simulate the conditions of the seas. After conducting effervescence measurements, two freezing point depression measurements were conducted. The freezing liquid line was depressed more than 15 K below the triple point temperatures of pure ethane (90.4 K) and pure methane (90.7 K). Experimental effervescence measurements will be used to compare directly with effervescence modeling to determine if changes are required in the design of the thermal management system as well as the propellers.

Synchrotron Bragg diffraction imaging characterization of synthetic diamond crystals for optical and electronic power device applications.

Bragg diffraction imaging enables the quality of synthetic single-crystal diamond substrates and their overgrown, mostly doped, diamond layers to be characterized. This is very important for improving diamond-based devices produced for X-ray optics and power electronics applications. The usual first step for this characterization is white-beam X-ray diffraction topography, which is a simple and fast method to identify the extended defects (dislocations, growth sectors, boundaries, stacking faults, overall curvature etc.) within the crystal. This allows easy and quick comparison of the crystal quality of diamond plates available from various commercial suppliers. When needed, rocking curve imaging (RCI) is also employed, which is the quantitative counterpart of monochromatic Bragg diffraction imaging. RCI enables the local determination of both the effective misorientation, which results from lattice parameter variation and the local lattice tilt, and the local Bragg position. Maps derived from these parameters are used to measure the magnitude of the distortions associated with polishing damage and the depth of this damage within the volume of the crystal. For overgrown layers, these maps also reveal the distortion induced by the incorporation of impurities such as boron, or the lattice parameter variations associated with the presence of growth-incorporated nitrogen. These techniques are described, and their capabilities for studying the quality of diamond substrates and overgrown layers, and the surface damage caused by mechanical polishing, are illustrated by examples.

An artificial metalloenzyme with the kinetics of native enzymes.

Natural enzymes contain highly evolved active sites that lead to fast rates and high selectivities. Although artificial metalloenzymes have been developed that catalyze abiological transformations with high stereoselectivity, the activities of these artificial enzymes are much lower than those of natural enzymes. Here, we report a reconstituted artificial metalloenzyme containing an iridium porphyrin that exhibits kinetic parameters similar to those of natural enzymes. In particular, variants of the P450 enzyme CYP119 containing iridium in place of iron catalyze insertions of carbenes into C-H bonds with up to 98% enantiomeric excess, 35,000 turnovers, and 2550 hours-1 turnover frequency. This activity leads to intramolecular carbene insertions into unactivated C-H bonds and intermolecular carbene insertions into C-H bonds. These results lift the restrictions on merging chemical catalysis and biocatalysis to create highly active, productive, and selective metalloenzymes for abiological reactions.

High-precision x-ray polarimetry.

The polarization purity of 6.457- and 12.914-keV x rays has been improved to the level of 2.4×10(-10) and 5.7×10(-10). The polarizers are channel-cut silicon crystals using six 90° reflections. Their performance and possible applications are demonstrated in the measurement of the optical activity of a sucrose solution.

Mechanical strain in actin networks regulates FilGAP and integrin binding to filamin A.

Mechanical stresses elicit cellular reactions mediated by chemical signals. Defective responses to forces underlie human medical disorders such as cardiac failure and pulmonary injury. The actin cytoskeleton's connectivity enables it to transmit forces rapidly over large distances, implicating it in these physiological and pathological responses. Despite detailed knowledge of the cytoskeletal structure, the specific molecular switches that convert mechanical stimuli into chemical signals have remained elusive. Here we identify the actin-binding protein filamin A (FLNA) as a central mechanotransduction element of the cytoskeleton. We reconstituted a minimal system consisting of actin filaments, FLNA and two FLNA-binding partners: the cytoplasmic tail of ß-integrin, and FilGAP. Integrins form an essential mechanical linkage between extracellular and intracellular environments, with ß-integrin tails connecting to the actin cytoskeleton by binding directly to filamin. FilGAP is an FLNA-binding GTPase-activating protein specific for RAC, which in vivo regulates cell spreading and bleb formation. Using fluorescence loss after photoconversion, a novel, high-speed alternative to fluorescence recovery after photobleaching, we demonstrate that both externally imposed bulk shear and myosin-II-driven forces differentially regulate the binding of these partners to FLNA. Consistent with structural predictions, strain increases ß-integrin binding to FLNA, whereas it causes FilGAP to dissociate from FLNA, providing a direct and specific molecular basis for cellular mechanotransduction. These results identify a molecular mechanotransduction element within the actin cytoskeleton, revealing that mechanical strain of key proteins regulates the binding of signalling molecules.

Differential stimulation of monocytic cells results in distinct populations of microparticles.

BACKGROUND: Microparticles (MPs), small vesicles shed from stimulated cells, permit cross-talk between cells within a particular environment. Their composition is thought to reflect their cell of origin, and differs according to whether they are produced by stimulation or by apoptosis. Whether MP properties vary according to stimulus is not yet known. METHODS: We studied the characteristics of MPs produced from monocytic THP-1 cells upon stimulation with lipopolysaccharide or a soluble P-selectin chimera, using proteomics, flow cytometry, western blotting, and electron microscopy. RESULTS: Utilizing a novel criterion of calcein-AM staining to define MPs, we found that MP populations were similar with respect to size, presence and organization of cytoskeleton, and expression of certain antigens. The MPs shared the same level of procoagulant activity. We found that MPs also have distinct characteristics, depending on stimuli. These include differences in phosphatidylserine expression and expression of proteins from specific subcellular locations such as the mitochondria, and of unique antigens such as leukocyte-associated immunoglobin-like-receptor (LAIR)-1, which was found only upon stimulation with the soluble P-selectin chimera. CONCLUSION: We found that the properties of MPs depend on the stimulus that produced them. This supports the concept that monocytic MPs differentially modulate thrombosis, inflammation and immune regulation according to stimulus.

HPHT growth and x-ray characterization of high-quality type IIa diamond.

The trend in synchrotron radiation (x-rays) is towards higher brilliance. This may lead to a very high power density, of the order of hundreds of watts per square millimetre at the x-ray optical elements. These elements are, typically, windows, polarizers, filters and monochromators. The preferred material for Bragg diffracting optical elements at present is silicon, which can be grown to a very high crystal perfection and workable size as well as rather easily processed to the required surface quality. This allows x-ray optical elements to be built with a sufficient degree of lattice perfection and crystal processing that they may preserve transversal coherence in the x-ray beam. This is important for the new techniques which include phase-sensitive imaging experiments like holo-tomography, x-ray photon correlation spectroscopy, coherent diffraction imaging and nanofocusing. Diamond has a lower absorption coefficient than silicon, a better thermal conductivity and lower thermal expansion coefficient which would make it the preferred material if the crystal perfection (bulk and surface) could be improved. Synthetic HPHT-grown (high pressure, high temperature) type Ib material can readily be produced in the necessary sizes of 4-8 mm square and with a nitrogen content of typically a few hundred parts per million. This material has applications in the less demanding roles such as phase plates: however, in a coherence-preserving beamline, where all elements must be of the same high quality, its quality is far from sufficient. Advances in HPHT synthesis methods have allowed the growth of type IIa diamond crystals of the same size as type Ib, but with substantially lower nitrogen content. Characterization of this high purity type IIa material has been carried out with the result that the crystalline (bulk) perfection of some of the HPHT-grown materials is approaching the quality required for the more demanding applications such as imaging applications and imaging applications with coherence preservation. The targets for further development of the type IIa diamond are size, crystal perfection, as measured by the techniques of white beam and monochromatic x-ray diffraction imaging (historically called x-ray topography), and also surface quality. Diamond plates extracted from the cubic growth sector furthest from the seed of the new low strain material produces no measurable broadening of the x-ray rocking curve width. One measures essentially the crystal reflectivity as defined by the intrinsic reflectivity curve (Darwin curve) width of a perfect crystal. In these cases the more sensitive technique of plane wave topography has been used to establish a local upper limit of the strain at the level of an 'effective misorientation' of 10(-7) rad.

Mechanics of proplatelet elaboration.

The cellular and molecular basis of the intricate process by which megakaryocytes (MKs) form and release platelets remains poorly understood. Work has shown that proplatelets, long cytoplasmic extensions made by mature MKs, are essential intermediates in platelet biogenesis. Microtubules are the main structural component of proplatelets and it is microtubule sliding, driven by dynein motors within cortical bundles, which elongates and thins proplatelets. Kinesin motors carry their cargo of platelet-specific granules and organelles into the proplatelets using the microtubule bundles as tracks. Extension of proplatelets is associated with repeated actin-dependent bending and bifurcation, which results in considerable amplification of free proplatelet ends. Large proplatelets, dissociated from the residual MK cell body, have the capacity to mature platelets. Only the ends of proplatelets form marginal microtubule coils similar to that observed in mature platelets, demonstrating that platelet formation completes primarily at proplatelet ends. Understanding the molecular basis of platelet formation requires detailed knowledge of how the MK microtubule machinery interacts to generate proplatelets and release platelets.

In situ and real-time probing of quasicrystal solidification dynamics by synchrotron imaging.

Quasicrystal growth remains an unsolved problem in condensed matter. The dynamics of the process is studied by means of synchrotron live imaging all along the solidification of icosahedral AlPdMn quasicrystals. The lateral motion of ledges driving faceted growth at the solid-melt interface is conclusively shown. When the solidification rate is increased, nucleation and free growth of new faceted grains occur in the melt due to the significant interface recoil induced by slow attachment kinetics. The detailed analysis of the evolution of these grains reveals the crucial role of aluminum rejection, both in the poisoning of their growth and driving fluid flow.

[Stages and barriers in cancer screening behaviour of 45 to 60-year old men--results of an empirical study]. / Stufen und Hürden der Teilnahme an Krebsvorsorgeuntersuchungen bei 45 - 60-jährigen Männern--Ergebnisse einer empirischen Untersuchung.

UNLABELLED: Between 2002 and 2004 the Centre of Applied Health Sciences of the University of Lüneburg carried out a research project concerning the cancer screening behaviour of men. Within a standardised survey all men aged 45 - 60 years of a local health insurance company were interviewed by a postal questionnaire about their cancer screening behaviour including their main reasons to engage or not to engage in the (insurance financed) cancer screening tests. 337 questionnaires could be analysed. As a theoretical framework, the "transtheoretical model" of Prochaska et al. was used to characterise the men according to their degree of readiness to engage in cancer screening tests. RESULTS: 25% of the men were regularly engaged in cancer screening tests. 40% have been engaged at least once or were in the stage of "preparation" to do so in the near future. 35% were resistant to undergo cancer screening tests. Anxiety concerning the check-up itself or the possibility to have a positive result were the main barriers for men not to engage in cancer screening. As an important factor to overcome such barriers, these men mentioned the need for better communication between doctors and patients. To improve cancer screening behaviour, this was considered more important than general information campaigns or organisational changes concerning the check-ups.

Stress-dependent elasticity of composite actin networks as a model for cell behavior.

Networks of filamentous actin cross-linked with the actin-binding protein filamin A exhibit remarkable strain stiffening leading to an increase in differential elastic modulus by several orders of magnitude over the linear value. The variation of the frequency dependence of the differential elastic and loss moduli as a function of prestress is consistent with that observed in living cells, suggesting that cell elasticity is always measured in the nonlinear regime, and that prestress is an essential control parameter.

Prestressed F-actin networks cross-linked by hinged filamins replicate mechanical properties of cells.

We show that actin filaments, shortened to physiological lengths by gelsolin and cross-linked with recombinant human filamins (FLNs), exhibit dynamic elastic properties similar to those reported for live cells. To achieve elasticity values of comparable magnitude to those of cells, the in vitro network must be subjected to external prestress, which directly controls network elasticity. A molecular requirement for the strain-related behavior at physiological conditions is a flexible hinge found in FLNa and some FLNb molecules. Basic physical properties of the in vitro filamin-F-actin network replicate the essential mechanical properties of living cells. This physical behavior could accommodate passive deformation and internal organelle trafficking at low strains yet resist externally or internally generated high shear forces.

Polaron delocalization in ladder macromolecular systems.

Organic macromolecules with conjugated building blocks have been the focus of extensive research that is motivated, in part, by the potential to create optical and electronic devices. We have shown that palladium-catalyzed amination can assemble triarylamine ladder materials with extended structures. Two ladder macromolecules have been prepared in high yields by a series of twelve or sixteen C-N coupling reactions. Studies of the electronic and optical properties of neutral and oxidized forms of the ladder structures were conducted. The optical and electronic properties of the ladder systems are compared to those of the linear tetra-phenyl-p-phenylenediamine as well as the tetra-p-anisyl-p-tetraazacyclophane. The electrochemistry of the ladder systems consists of a multiwave voltammogram with a relatively low first oxidation potential. Electron paramagnetic resonance spectroscopy of the ladder systems suggests the presence of a large density of delocalized polarons. Linear absorption measurements of the chemically oxidized ladders revealed both polaron and intervalence absorption bands. Steady-state and time-resolved fluorescence measurements were also carried out to characterize the dynamics in these novel systems.

Origin of the opalescence at the alpha-beta transition of quartz: role of the incommensurate phase studied by synchrotron radiation.

The origin of the light scattering observed at the alpha-beta transition of quartz is still a subject of controversy. We present structural studies performed during the coexistence of the alpha and the intermediate incommensurate (inc) phases using simultaneously synchrotron x-ray diffraction and optical techniques. The small and large angle light scatterings are due, respectively, to the orientation domains of the 3q inc phase and to the alpha phase twins revealed by diffuse x-ray scattering. In the vicinity of the interphase boundary, the two light scattering regions, both with perturbed properties, form a complex multiscale structure.

[Notes on the care of mentally ill residents in nursing homes in the Uelzen county district]. / Zur Versorgung von psychisch kranken Altenheimbewohner/innen im Landkreis Uelzen.

From 1999 to 2001 the "Centre of Applied Health Sciences" (University of Luneburg) carried out a research project in cooperation with the Psychiatric Hospital Hacklingen in Luneburg and the department of social psychiatry and psychotherapy of the Hanover College of Medicine. The project covered the prevalence of mental disorders among the residents of nursing and geriatric homes in the district of Uelzen including different aspects of medical, psychiatric and nursing care. The research was based on a survey including all residents of these institutions. The response rate was 925 of a total of 1,100 residents. Results showed that three-quarters of the residents had considerable and different psychiatric symptoms and that almost half of the residents suffered from symptoms of dementia. The provision of health care as well as nursing care for these residents are considerably deficient. Care facilities are hardly of therapeutical standard and guidelines. This refers in particular to treatment with psychoactive drugs. The (few) comparable studies show that -- with the exception of some pilot projects -- the situation in the district of Uelzen may be similar to that in other regions of Germany.