Liquid Metal Grid Patterned Thin Film Devices Toward Absorption-Dominant and Strain-Tunable Electromagnetic Interference Shielding.

The demand of high-performance thin-film-shaped deformable electromagnetic interference (EMI) shielding devices is increasing for the next generation of wearable and miniaturized soft electronics. Although highly reflective conductive materials can effectively shield EMI, they prevent deformation of the devices owing to rigidity and generate secondary electromagnetic pollution simultaneously. Herein, soft and stretchable EMI shielding thin film devices with absorption-dominant EMI shielding behavior is presented. The devices consist of liquid metal (LM) layer and LM grid-patterned layer separated by a thin elastomeric film, fabricated by leveraging superior adhesion of aerosol-deposited LM on elastomer. The devices demonstrate high electromagnetic shielding effectiveness (SE) (SET of up to 75 dB) with low reflectance (SER of 1.5 dB at the resonant frequency) owing to EMI absorption induced by multiple internal reflection generated in the LM grid architectures. Remarkably, the excellent stretchability of the LM-based devices facilitates tunable EMI shielding abilities through grid space adjustment upon strain (resonant frequency shift from 81.3 to 71.3 GHz @ 33% strain) and is also capable of retaining shielding effectiveness even after multiple strain cycles. This newly explored device presents an advanced paradigm for powerful EMI shielding performance for next-generation smart electronics.

Anisotropy in magnetic materials for sensors and actuators in soft robotic systems.

The field of soft intelligent robots has rapidly developed, revealing extensive potential of these robots for real-world applications. By mimicking the dexterities of organisms, robots can handle delicate objects, access remote areas, and provide valuable feedback on their interactions with different environments. For autonomous manipulation of soft robots, which exhibit nonlinear behaviors and infinite degrees of freedom in transformation, innovative control systems integrating flexible and highly compliant sensors should be developed. Accordingly, sensor-actuator feedback systems are a key strategy for precisely controlling robotic motions. The introduction of material magnetism into soft robotics offers significant advantages in the remote manipulation of robotic operations, including touch or touchless detection of dynamically changing shapes and positions resulting from the actuations of robots. Notably, the anisotropies in the magnetic nanomaterials facilitate the perception and response with highly selective, directional, and efficient ways used for both sensors and actuators. Accordingly, this review provides a comprehensive understanding of the origins of magnetic anisotropy from both intrinsic and extrinsic factors and summarizes diverse magnetic materials with enhanced anisotropy. Recent developments in the design of flexible sensors and soft actuators based on the principle of magnetic anisotropy are outlined, specifically focusing on their applicabilities in soft robotic systems. Finally, this review addresses current challenges in the integration of sensors and actuators into soft robots and offers promising solutions that will enable the advancement of intelligent soft robots capable of efficiently executing complex tasks relevant to our daily lives.

Modified application of SAMe-TT2R2 scoring system in Asian patients with atrial fibrillation for the selection of oral anticoagulants.

BACKGROUND/AIMS: The SAMe-TT2R2 score is used for assessing anticoagulation control (AC) quality with warfarin. However, it is hard to apply SAMe-TT2R2 score in Asian patients with atrial fibrillation (AF), because it has not been proven in those populations. This study aimed to validate the SAMe-TT2R2 score in Asian patients with AF and suggest a modified SAMe- TT2R2 score for this population. METHODS: We analyzed 710 Korean patients with AF who were using warfarin. The AC quality was assessed as the mean time in therapeutic range (TTR). Each component of SAMe-TT2R2 score was evaluated for the relationship with AC. Further clinical factors that predict AC were analyzed. Identified factors were re-assorted and constructed as SA2Me-TTR scoring system. RESULTS: Of the components of the SAMe-TT2R2 score, female, age, and rhythm control were associated with AC. Heart failure and renal insufficiency were newly identified factors associated with AC. The modified SA2Me-TTR score was reconstructed with the relevant risk factors (S, female gender, 1 point; A, age < 60 yr, 2 points; Me, medical history of heart failure, 1 point; T, treatment for rhythm control, 1 point; T, history of stroke or transient ischemic attack, 1 point; R, renal insufficiency, 1 point). The modified SA2Me-TTR score demonstrated an excellent relationship with the grading of AC. The modified SA2Me-TTR score ≤ 1 identified patients with good AC (hazard ratio 2.46, 95% CI 1.75-3.47). CONCLUSION: The modified SA2Me-TTR score was useful for guiding oral anticoagulants selection in Asian patients with AF.

Encryptable Electrochromic Smart Windows: Uniaxially Oriented and Polymerized Hierarchical Nanostructures Constructed by Self-Assembly of Tetrathiafulvalene-Based Reactive Mesogens.

Tetrathiafulvalene (TTF)-based reactive mesogens (TTF-E and TTF-T) are synthesized, self-assembled, uniaxially oriented, and polymerized for the development of encryptable electrochromic smart windows. Electrochemical and spectroscopic experiments prove that the self-assembled TTF mixture (TTFM, TTF-E:TTF-T = 1:1) can reversibly switch the absorption wavelength of the TTF chromophore according to the redox reactions. Based on the identification of the phase transition and crystallographic structure, uniaxially oriented hierarchical nanostructures are easily constructed on the macroscopic area by simple coating and a self-assembly process. Subsequent polymerization of hierarchical nanostructures of TTFM significantly enhances thermal and mechanical stabilities and makes it possible for them to be fabricated as an electrochromic device. The angularly dependent correlation between the anisotropy of mesogens and the linearly polarized light allow us to demonstrate TTFM as smart windows capable of various optical security applications, including privacy protection and information encryption.

Reconfigurable Magnetic Origami Actuators with On-Board Sensing for Guided Assembly.

Origami utilizes orchestrated transformation of soft 2D structures into complex 3D architectures, mimicking shapes and functions found in nature. In contrast to origami in nature, synthetic origami lacks the ability to monitor the environment and correspondingly adjust its behavior. Here, magnetic origami actuators with capabilities to sense their orientation and displacement as well as detect their own magnetization state and readiness for supervised folding are designed, fabricated, and demonstrated. These origami actuators integrate photothermal heating and magnetic actuation by using composite thin films (≈60 µm thick) of shape-memory polymers with embedded magnetic NdFeB microparticles. Mechanically compliant magnetic field sensors, known as magnetosensitive electronic skins, are laminated on the surface of the soft actuators. These ultrathin actuators accomplish sequential folding and recovery, with hinge locations programmed on the fly. Endowing mechanically active smart materials with cognition is an important step toward realizing intelligent, stimuli-responsive structures.

Printable and Stretchable Giant Magnetoresistive Sensors for Highly Compliant and Skin-Conformal Electronics.

Highly compliant electronics, naturally conforming to human skin, represent a paradigm shift in the interplay with the surroundings. Solution-processable printing technologies are yet to be developed to comply with requirements to mechanical conformability of on-skin appliances. Here, it is demonstrated that high-performance spintronic elements can be printed on ultrathin 3 µm thick polymeric foils enabling the mechanically imperceptible printed magnetoelectronics, which can adapt to the periodic buckling surface to be biaxially stretched over 100%. They constitute the first example of printed and stretchable giant magnetoresistive sensors, revealing 2 orders of magnitude improvements in mechanical stability and sensitivity at small magnetic fields, compared to the state-of-the-art printed magnetoelectronics. The key enabler of this performance enhancement is the use of elastomeric triblock copolymers as a binder for the magnetosensitive paste. Even when bent to a radius of 16 µm, the sensors printed on ultrathin foils remain intact and possess unmatched sensitivity for printed magnetoelectronics of 3 T-1 in a low magnetic field of 0.88 mT. The compliant printed sensors can be used as components of on-skin interactive electronics as it is demonstrated with a touchless control of virtual objects including zooming in and out of interactive maps and scrolling through electronic documents.

High-Resolution Filtration Patterning of Silver Nanowire Electrodes for Flexible and Transparent Optoelectronic Devices.

Silver nanowire (AgNW) electrodes attract significant attention in flexible and transparent optoelectronic devices; however, high-resolution patterning of AgNW electrodes remains a considerable challenge. In this study, we have introduced a simple technique for high-resolution solution patterning of AgNW networks, based on simple filtration of AgNW solution on a patterned polyimide shadow mask. This solution process allows the smallest pattern size of AgNW electrodes, down to a width of 3.5 µm. In addition, we have demonstrated the potential of these patterned AgNW electrodes for applications in flexible optoelectronic devices, such as photodetectors. Specifically, for flexible and semitransparent UV photodetectors, AgNW electrodes are embedded in sputtered ZnO films to enhance the photocurrent by light scattering and trapping, which resulted in a significantly enhanced photocurrent (up to 800%) compared to devices based on AgNW electrodes mounted on top of ZnO films. In addition, our photodetector could be operated well under extremely bent conditions (bending radius of approximately 770 µm) and provide excellent durability even after 500 bending cycles.

High-Performance Hybrid Photovoltaics with Efficient Interfacial Contacts between Vertically Aligned ZnO Nanowire Arrays and Organic Semiconductors.

Hybrid photovoltaics (HPVs) incorporating both organic and inorganic semiconducting materials have attracted much attention as next-generation photovoltaics because of their advantage of combining both materials. The hybridization of ZnO nanowires (NWs) and organic semiconductors is expected to be a suitable approach to overcome the limited exciton diffusion length and low electron mobility associated with current organic photovoltaics. The use of ZnO NWs allows researchers to tune nanoscale dimensions more precisely and to achieve rod-to-rod spacing below 10 nm. However, the perfect incorporation of organic semiconductors into densely packed ZnO NW arrays has yet to be achieved. In this study, we report the fabrication of ZnO NW arrays and various organic heterojunction-based HPVs using the feasible and effective vacuum-assisted double coating (VADC) method, achieving full coverage of the organic semiconductors on the compact ZnO NW arrays. The newly proposed VADC method ensures perfect infiltration and full coverage of the organic semiconductors on the densely packed NW arrays. Compared with the conventional single spin-coating process, the use of the VADC method led to 11 and 14% increases in the power conversion efficiency of P3HT:PCBM- and PBDTTT-C-T:PC71BM-based HPVs, respectively. Our studies provide a feasible method for the fabrication of efficient HPVs.

Skin-Inspired Hierarchical Polymer Architectures with Gradient Stiffness for Spacer-Free, Ultrathin, and Highly Sensitive Triboelectric Sensors.

The gradient stiffness between stiff epidermis and soft dermis with interlocked microridge structures in human skin induces effective stress transmission to underlying mechanoreceptors for enhanced tactile sensing. Inspired by skin structure and function, we fabricate hierarchical nanoporous and interlocked microridge structured polymers with gradient stiffness for spacer-free, ultrathin, and highly sensitive triboelectric sensors (TESs). The skin-inspired hierarchical polymers with gradient elastic modulus enhance the compressibility and contact areal differences due to effective transmission of the external stress from stiff to soft layers, resulting in highly sensitive TESs capable of detecting human vital signs and voice. In addition, the microridges in the interlocked polymers provide an effective variation of gap distance between interlocked layers without using the bulk spacer and thus facilitate the ultrathin and flexible design of TESs that could be worn on the body and detect a variety of pressing, bending, and twisting motions even in humid and underwater environments. Our TESs exhibit the highest power density (46.7 µW/cm2), pressure (0.55 V/kPa), and bending (∼0.1 V/°) sensitivities ever reported on flexible TESs. The proposed design of hierarchical polymer architectures for the flexible and wearable TESs can find numerous applications in next-generation wearable electronics.

Wearable and flexible sensors for user-interactive health-monitoring devices.

Flexible electronic devices that are lightweight and wearable are critical for personal healthcare systems, which are not restricted by time and space. To monitor human bio-signals in a non-invasive manner, skin-conforming, highly sensitive, reliable, and sustainable healthcare monitoring devices are required. In this review, we introduce flexible and wearable sensors based on engineered functional nano/micro-materials with unique sensing capabilities for detection of physical and electrophysiological vital signs of humans. In addition, we investigate key factors for the development of user-interactive healthcare devices that are customizable, wearable, skin-conforming, and monolithic (design), and have long-term monitoring capability with sustainable power sources. Finally, we describe potential challenges of developing current wearable healthcare devices for applications in fitness, medical diagnosis, prosthetics, and robotics.