Reduction of adsorbed dyes content in the discharged sludge coming from an industrial textile wastewater treatment plant using aerobic activated sludge process.

Dye mass balance study at full-scale industrial textile wastewater (ITW) treatment plant showed that 1.5 ton of excess waste sludge, containing 304.5 Kg of dyes, are daily produced and discharged in landfills. Therefore, this by-product of activated sludge process (ASP) presents a serious environmental problem. In this work, a laboratory and pilot scale investigations were carried out to optimize aerobic biodegradation efficiency to reduce the amount of residual adsorbed dye that will be found in the waste sludge. The resistance of acclimated biomass to the toxicity of ITW was studied in 2.5 L batch reactors using different dye to biomass (D/B) ratios of 0.102, 0.25 and 0.72 g CODS/g VSS. Results of respirometric analyses showed that acclimated activated sludge (AS) biomass is able to treat ITW at high D/B ratio of 0.72 g CODS/g VSS. Moreover, biodegradation kinetic study using Monod law showed that COD and color removal were better for the highest D/B ratio. The half saturation coefficient of heterotrophs for indigo dye (KSind) of 20.01 g/m3 showed high affinity between biomass and dye molecules. Optimization of the process at pilot-scale with different hydraulic retention time (HRT) of 2-5 days, and different sludge recycling rates (SRR) of 220-680 m3/d, showed that high HRT of 5 days and a SRR of 0.22 allowed the best dye biodegradation efficiency (95%). Application of the best conditions at full-scale reduced significantly (89%) the amount of the discharged dyes from 304.5 Kg/d to 33 Kg/d. Results were numerically validated using a mathematical model based on the activated sludge model 1 (ASM1).

Polyvinyl acetate processing wastewater treatment using combined Fenton's reagent and fungal consortium: Application of central composite design for conditions optimization.

The Fenton reaction as an oxidative degradation process was used for industrial chemical wastewater (ICW) pretreatment. The biodegradation of pretreated ICW was performed, in aqueous environment under aerobic condition, by a defined fungal consortium. The central composite design (CCD) was used to study the effect of nitrogen and phosphorus addition and the concentration of the pollution on the removal of polyvinyl alcohol (PVA) and organic compounds. The interaction between parameters was modeled using the response surface methodology (RSM). Results of optimization showed COD, PVA and color removal yields of 97.8%, 98.5% and 99.75%, respectively with a supplementof 1.4 gL-1 of (NH4)2SO4, 1.2 gL-1 of KH2PO4 and 75% of concentrated ICW. Enzymatic analysis proved that laccase and lignin peroxidase were involved in the biodegradation with 45 UIL-1 and 450 UIL-1, respectively. Furthermore, the analysis of metabolic products using Fourier transforms infrared spectroscopy (FTIR) and nuclear magnetic resonance (1HNMR) showed clearly the mineralization of organic compounds and the formation of formic acid and ethanol. Therefore, the effective treatment of ICW was achieved by developing an integrated chemical and biological process which met the requirement for a safety effluent respectful for environment without risks for public health.