Photoelectrochemical Solution Gated Graphene Field-Effect Transistor Functionalized by Enzymatic Cascade Reaction for Organophosphate Detection.

Solution Gated Graphene Field-Effect Transistors (SGGT) are eagerly anticipated as an amplification platform for fabricating advanced ultra-sensitive sensors, allowing significant modulation of the drain current with minimal gate voltage. However, few studies have focused on light-matter interplay gating control for SGGT. Herein, this challenge is addressed by creating an innovative photoelectrochemical solution-gated graphene field-effect transistor (PEC-SGGT) functionalized with enzyme cascade reactions (ECR) for Organophosphorus (OPs) detection. The ECR system, consisting of acetylcholinesterase (AChE) and CuBTC nanomimetic enzymes, selectively recognizes OPs and forms o-phenylenediamine (oPD) oligomers sediment on the PEC electrode, with layer thickness related to the OPs concentration, demonstrating time-integrated amplification. Under light stimulation, the additional photovoltage generated on the PEC gate electrode is influenced by the oPD oligomers sediment layer, creating a differentiated voltage distribution along the gate path. PEC-SGGT, inherently equipped with built-in amplification circuits, sensitively captures gate voltage changes and delivers output with an impressive thousandfold current gain. The seamless integration of these three amplification modes in this advanced sensor allows a good linear range and highly sensitive detection of OPs, with a detection limit as low as 0.05 pm. This work provides a proof-of-concept for the feasibility of light-assisted functionalized gate-controlled PEC-SGGT for small molecule detection.

Unconventional hcp/fcc Nickel Heteronanocrystal with Asymmetric Convex Sites Boosts Hydrogen Oxidation.

Developing non-platinum group metal catalysts for the sluggish hydrogen oxidation reaction (HOR) is critical for alkaline fuel cells. To date, Ni-based materials are the most promising candidates but still suffer from insufficient performance. Herein, we report an unconventional hcp/fcc Ni (u-hcp/fcc Ni) heteronanocrystal with multiple epitaxial hcp/fcc heterointerfaces and coherent twin boundaries, generating rugged surfaces with plenty of asymmetric convex sites. Systematic analyses discover that such convex sites enable the adsorption of *H in unusual bridge positions with weakened binding energy, circumventing the over-strong *H adsorption on traditional hollow positions, and simultaneously stabilizing interfacial *H2O. It thus synergistically optimizes the HOR thermodynamic process as well as reduces the kinetic barrier of the rate-determining Volmer step. Consequently, the developed u-hcp/fcc Ni exhibits the top-rank alkaline HOR activity with a mass activity of 40.6 mA mgNi-1 (6.3 times higher than fcc Ni control) together with superior stability and high CO-tolerance. These results provide a paradigm for designing high-performance catalysts by shifting the adsorption state of intermediates through configuring surface sites.

Study on the correlation between endometriosis and adverse pregnancy outcomes.

OBJECTIVE: This study aims to investigate the correlation between endometriosis (EMS) and adverse obstetric outcomes. METHODS: In this retrospective study 2,925 cesarean section cases were analyzed at the Women and Children's Hospital of Ningbo University, Department of Obstetrics, between May 2019 and December 2023. The study included 1,363 women diagnosed with endometriosis during pregnancy at the time of surgery (study group) and 1,562 women without such a diagnosis (control group). The comparative assessment covered the age of first-time mothers, number of pregnancies and births, gestational age at delivery, incidence rates of assisted reproductive technology (ART), spontaneous abortion, preterm birth, placenta previa, placental adhesion, and postpartum hemorrhage. RESULTS: The study group demonstrated a higher average age of first-time mothers, fewer pregnancies and births, and a significantly shorter gestational age at delivery (P < 0.05) compared to the control group. Incidences of primary infertility, spontaneous abortion, and ART utilization were higher in the study group. The occurrence of placenta previa, placental adhesion, and postpartum hemorrhage was also higher in the study group, indicating significant statistical differences (P < 0.05). No significant difference was observed in preterm birth rates between the groups (P > 0.05). CONCLUSION: Pregnancy in women with endometriosis is associated with a higher likelihood of adverse outcomes, therefore highlighting the need for increased clinical awareness.

Surgical treatment outcomes of acetabular posterior wall and posterior column fractures using 3D printing technology and individualized custom-made metal plates: a retrospective study.

BACKGROUND: Fractures involving the posterior acetabulum with its rich vascular and neural supply present challenges in trauma orthopedics. This study evaluates the effectiveness of 3D printing technology with the use of custom-made metal plates in the treatment of posterior wall and column acetabular fractures. METHODS: A retrospective analysis included 31 patients undergoing surgical fixation for posterior wall and column fractures of the acetabulum (16 in the 3D printing group, utilizing 3D printing for a 1:1 pelvic model and custom-made plates based on preoperative simulation; 15 in the traditional group, using conventional methods). Surgical and instrument operation times, intraoperative fluoroscopy frequency, intraoperative blood loss, fracture reduction quality, fracture healing time, preoperative and 12-month postoperative pain scores (Numeric Rating Scale, NRS), hip joint function at 6 and 12 months (Harris scores), and complications were compared. RESULTS: The surgical and instrument operation times were significantly shorter in the 3D printing group (p < 0.001). The 3D printing group exhibited significantly lower intraoperative fluoroscopy frequency and blood loss (p = 0.001 and p < 0.001, respectively). No significant differences were observed between the two groups in terms of fracture reduction quality, fracture healing time, preoperative pain scores (NRS scores), and 6-month hip joint function (Harris scores) (p > 0.05). However, at 12 months, hip joint function and pain scores were significantly better in the 3D printing group (p < 0.05). Although the incidence of complications was lower in the 3D printing group (18.8% vs. 33.3%), the difference did not reach statistical significance (p = 0.433). CONCLUSION: Combining 3D printing with individualized custom-made metal plates for acetabular posterior wall and column fractures reduces surgery and instrument time, minimizes intraoperative procedures and blood loss, enhancing long-term hip joint function recovery. CLINICAL TRIAL REGISTRATION: 12/04/2023;Trial Registration No. ChiCTR2300070438; http://www.chictr.org.cn .

Tibial tubercle avulsion fracture following preexisting Osgood-Schlatter disease in an adolescent: a case report.

Tibial tubercle avulsion fractures (TTAFs) are rare but typical in children and adolescents and Osgood-Schlatter disease (OSD) may be involved in their pathogenesis. However, few publications have reported the relationship between OSD and TTAF. A 16-year-old healthy male adolescent presented with pain, swelling and limited range of motion of the right knee following sudden acceleration while running. Based on the radiographic evidence, the patient was diagnosed with an avulsion fracture of the right tibial tubercle and OSD. Open reduction and internal fixation were performed using two cannulated screws and two Kirschner wires. The patient returned to preinjury activity levels at the 12-month follow-up postoperatively. This case report aimed to highlight this unique injury pattern. For patients with TTAFs, not only should the fracture be treated, but the cause of the fracture, such as OSD, should also be given appropriate treatment.

Unraveling the Contribution of MulSOS2 in Conferring Salinity Tolerance in Mulberry (Morus atropurpurea Roxb).

Salinity is one of the most serious threats to sustainable agriculture. The Salt Overly Sensitive (SOS) signaling pathway plays an important role in salinity tolerance in plants, and the SOS2 gene plays a critical role in this pathway. Mulberry not only has important economic value but also is an important ecological tree species; however, the roles of the SOS2 gene associated with salt stress have not been reported in mulberry. To gain insight into the response of mulberry to salt stress, SOS2 (designated MulSOS2) was cloned from mulberry (Morus atropurpurea Roxb), and sequence analysis of the amino acids of MulSOS2 showed that it shares some conserved domains with its homologs from other plant species. Our data showed that the MulSOS2 gene was expressed at different levels in different tissues of mulberry, and its expression was induced substantially not only by NaCl but also by ABA. In addition, MulSOS2 was exogenously expressed in Arabidopsis, and the results showed that under salt stress, transgenic MulSOS2 plants accumulated more proline and less malondialdehyde than the wild-type plants and exhibited increased tolerance to salt stress. Moreover, the MulSOS2 gene was transiently overexpressed in mulberry leaves and stably overexpressed in the hairy roots, and similar results were obtained for resistance to salt stress in transgenic mulberry plants. Taken together, the results of this study are helpful to further explore the function of the MulSOS2 gene, which provides a valuable gene for the genetic breeding of salt tolerance in mulberry.

CO-Tolerant Hydrogen Oxidation Electrocatalysts for Low-Temperature Hydrogen Fuel Cells.

The severe performance degradation of low-temperature hydrogen fuel cells upon exposure to trace amounts of carbon monoxide (CO) impurities in reformate hydrogen fuels is one of the challenges that hinders their commercialization. Despite significant efforts that have been made, the CO-tolerance performance of electrocatalysts for the hydrogen oxidation reaction (HOR) is still unsatisfactory. This Perspective discusses the path forward for the rational design of CO-tolerant HOR electrocatalysts. The fundamentals of the CO-tolerant mechanisms on commercialized platinum group metal (PGM) electrocatalysts via either promoting CO electrooxidation or weakening CO adsorption are provided, and comprehensive discussions based on these strategies are presented with typical examples. Given the recent progress, some emerging strategies, including blocking CO diffusion with a barrier layer and developing non-PGM HOR catalysts, are also discussed. We conclude with a discussion of the strengths and limitations of these strategies along with the perspectives of the major challenges and opportunities for future research on CO-tolerant HOR electrocatalysts.

[Progress on study of factors influencing the prognosis and complications of surgery for discoid meniscus injury in children].

The discoid meniscus is a common congenital meniscal malformation that is prevalent mainly in Asians and often occurs in the lateral discoid meniscus. Patients with asymptomatic discoid meniscus are usually treated by conservative methods such as observation and injury avoidance, while patients with symptoms and tears need to be treated surgically. Arthroscopic saucerization combined with partial meniscectomy and meniscus repair is the most common surgical approach., and early to mid-term reports are good. The prognostic factors are the patient's age at surgery、follow-up time and type of surgery. Some patients experience complications such as prolonged postoperative knee pain, early osteoarthritis, retears and Osteochondritis dissecans. The incidence of prolonged postoperative knee pain was higher and the incidence of Osteochondritis dissecans was the lowest. Retears of the lateral meniscus is the main reason for reoperation.

Thyrotropin induces atherosclerosis by upregulating large conductance Ca2+-activated K+ channel subunits.

Hypothyroidism is associated with elevated levels of serum thyrotropin (TSH), which have been shown to promote abnormal proliferation of vascular smooth muscle cells and contribute to the development of atherosclerosis. However, the specific mechanisms underlying the TSH-induced abnormal proliferation of vascular smooth muscle cells remain unclear. The objective of this study was to investigate the role of TSH in the progression of atherosclerosis. Our research findings revealed that hypothyroidism can trigger early atherosclerotic changes in the aorta of Wistar rats. In alignment with our in vitro experiments, we observed that TSH induces abnormal proliferation of aortic smooth muscle cells by modulating the expression of α and ß1 subunits of large conductance Ca2+-activated K+ (BKCa) channels within these cells via the cAMP/PKA signaling pathway. These results collectively indicate that TSH acts through the cAMP/PKA signaling pathway to upregulate the expression of α and ß1 subunits of BKCa channels, thereby promoting abnormal proliferation of arterial smooth muscle cells. These findings may provide a basis for the clinical prevention and treatment of atherosclerosis caused by elevated TSH levels.

Biotoxicity of Halide Perovskites in Mice.

Halide perovskites are crystalline semiconductors with exceptional optoelectronic properties, rapidly developing toward large-scale applications. Lead (II) (Pb2+ ) is the core element used to prepare halide perovskites. Pb2+ can displace key 2+ elements, including calcium, zinc and iron, that regulate vital physiological functions. Sn2+ can replace Pb2+ within the perovskite structure and, if accidentally dispersed in the environment, it readily oxidizes to Sn4+ , which is compatible with physiological functions and thus potentially safe. The 3+ salt bismuth (III) (Bi3+ ) is also potentially safe for the same reason and useful to prepare double perovskites. Here, this work studies the biotoxicity of Pb, Sn, and Bi perovskites in mice for the first time. This work analyses histopathology and growth of mice directly exposed to perovskites and investigate the development of their offspring generation. This study provides the screening of organs and key physiological functions targeted by perovskite exposure to design specific studies in mammalians.

Progress on study of factors influencing the prognosis and complications of surgery for discoid meniscus injury in children / 中国骨伤

The discoid meniscus is a common congenital meniscal malformation that is prevalent mainly in Asians and often occurs in the lateral discoid meniscus. Patients with asymptomatic discoid meniscus are usually treated by conservative methods such as observation and injury avoidance, while patients with symptoms and tears need to be treated surgically. Arthroscopic saucerization combined with partial meniscectomy and meniscus repair is the most common surgical approach., and early to mid-term reports are good. The prognostic factors are the patient's age at surgery、follow-up time and type of surgery. Some patients experience complications such as prolonged postoperative knee pain, early osteoarthritis, retears and Osteochondritis dissecans. The incidence of prolonged postoperative knee pain was higher and the incidence of Osteochondritis dissecans was the lowest. Retears of the lateral meniscus is the main reason for reoperation.

Papillary thyroid carcinoma with clear cell renal cell carcinoma metastasized to the thyroid gland: A case report.

Metastasis of clear cell renal cell carcinoma (ccRCC) to the thyroid gland is rare, and simultaneous occurrence of ccRCC and papillary thyroid carcinoma (PTC) is even rarer. Due to the occult nature of the disease, the clinical diagnosis is difficult. In the case of multiple tumors, the possibility of thyroid metastasis should not be ignored during the clinical diagnosis and treatment of PTC. The present study reported a case with initial diagnosis of PTC and accidental discovery of thyroid metastasis of ccRCC. This case study aims to improve the understanding of occult thyroid metastasis, providing a reference for its clinical diagnosis and treatment. Accordingly, misdiagnosis and missed diagnosis of this disease may be reduced and the survival rate and the life quality of patients can be improved.

Emergency entity relationship extraction for water diversion project based on pre-trained model and multi-featured graph convolutional network.

Using information technology to extract emergency decision-making knowledge from emergency plan documents is an essential means to enhance the efficiency and capacity of emergency management. To address the problems of numerous terminologies and complex relationships faced by emergency knowledge extraction of water diversion project, a multi-feature graph convolutional network (PTM-MFGCN) based on pre-trained model is proposed. Initially, through the utilization of random masking of domain-specific terminologies during pre-training, the model's comprehension of the meaning and application of such terminologies within specific fields is enhanced, thereby augmenting the network's proficiency in extracting professional terminologies. Furthermore, by introducing a multi-feature adjacency matrix to capture a broader range of neighboring node information, thereby enhancing the network's ability to handle complex relationships. Lastly, we utilize the PTM-MFGCN to achieve the extraction of emergency entity relationships in water diversion project, thus constructing a knowledge graph for water diversion emergency management. The experimental results demonstrate that PTM-MFGCN exhibits improvements of 2.84% in accuracy, 4.87% in recall, and 5.18% in F1 score, compared to the baseline model. Relevant studies can effectively enhance the efficiency and capability of emergency management, mitigating the impact of unforeseen events on engineering safety.

Surgical options for distal radius fractures of type C in elderly patients over 65 years old: a comparison of external fixation with Kirschner wires and volar locking plate.

BACKGROUND: ue to the lack of consensus on the optimal surgical treatment for distal radius fractures (DRF) in elderly patients over 65 years old, the purpose of this study was to compare the efficacy of external fixation (EF) with Kirschner wires and volar locking plate (VLP) in the treatment of DRF through a retrospective cohort study. We hypothesized that there would be no significant difference in overall complications and functional recovery between the two methods. METHODS: We retrospectively analyzed 62 patients over 65 years old who underwent surgical treatment for C-type DRF between 2019 and 2022. Based on the different treatment methods, they were divided into the EF group and the VLP group. General data, inpatient data, and postoperative complications during follow-up were recorded. The X-ray images before surgery, after surgery, and at the last follow-up were analyzed, and the results of wrist motion range, Gartland-Werley wrist joint score, and DASH score were evaluated 6 months after surgery for both groups. RESULT: Thirty patients underwent closed reduction and external fixation combined with Kirschner wire fixation, while 32 underwent open reduction and VLP fixation. The EF group had significantly shorter operation time, intraoperative blood loss, injury-to-surgery time, and hospital stay compared to the VLP group (all p < 0.001). At the last follow-up, the radiographic parameters (ulnar variance and radial inclination) and wrist joint function (wrist dorsiflexion and forearm supination) were better in the VLP group than in the EF group (p = 0.04, p = 0.01, p = 0.001, p = 0.02, respectively). However, there was no significant difference in overall Gartland-Werley wrist joint score, DASH score, and incidence of postoperative complications between the two groups (p = 0.31, p = 0.25, p = 0.47, respectively). CONCLUSION: For patients aged 65 and above with distal radius fractures (DRF) of type C, VLP and external fixation with Kirschner wires yield comparable functional outcome and complications rate at the short term. However, VLP allowed restoration of better radiological parameters.

A Campylobacteriosis Outbreak Caused by One Asymptomatic Food Handler Carrier.

In August 2021, three students with diarrhea from the same school visited a local hospital in the S district of Beijing. An epidemic investigation showed that there were more students with diarrhea in the same school and they had one meal together. Campylobacter jejuni was isolated from both patients with diarrhea and asymptomatic food handlers; however, the latter also carried Campylobacter coli. Phylogenomic analysis showed that there was a campylobacteriosis outbreak among the students, and the asymptomatic food handler may have been the source of the infection. Routine inspection and surveillance for Campylobacter is needed for the food producing staff, particularly those cooking in the cafeteria in schools or other public food services.

Blooming characteristics and breeding system of an invasive plant Gaura parviflora.

The invasiveness and dissemination of exotic species are strongly influenced by its sexual reproduction characteristics, including blooming characteristics and breeding system. Exploring the association of these sexual reproductive traits with invasiveness would be helpful for revealing the mechanism of its successful invasion. We examined the blooming characteristics and breeding system of Gaura parviflora based on field observations, out-crossing index (OCI) estimation, and hand-pollination experiments. The results showed flowering duration of the G. parviflora population (flowering period) was short (more than 3 months). The life span of single flower (floral longevity) was 40.46 h. Its flower diameter was 3.99 mm. Over seven flowers in bloom per inflorescence and most individuals often bloomed synchronously, which showed a 'mass-flowering pattern'. The changing trend of pollen and stigma vitality was relatively similar, but the duration of stigma vitality was 2 h longer than that of pollen. The stigma and the anthers were close to each other at the initial flowering stage, but the stigma removed from the anthers at the full-blooming stage with the style curving downwards. Many pollinators visited flowers in late full-blooming stage, which were mainly Apis mellifera and Syrphidae spp. Their average visiting frequency was 9.8 times·m-2·h-1. The fruit set in natural pollination after emasculation treatment (insect or wind pollination) was signi-ficantly higher than that in bagged and emasculation treatment, and the treatment of emasculated and bagged with nylon net (excluding insect pollination) could also bear fruits, indicating possible existence of ambophily in G. parviflora. The results of pollen ovule ratio (P/O) mensuration, OCI estimation and hand-pollination experiments showed that its mating system type belonged to additive mixed mating system. So, its characteristics, such as smaller flower size, shorter floral longevity and flowering period, were conducive to allocating more resources to plant growth and seed development, which would help improve its total fitness. The changes of spatial position of male and female organs not only avoided interference between male and female functions, but also created opportunities for stigmas to receive outcross pollen. In addition, the 'mass-flowering pattern' was conducive to attracting pollinators. The pollination mechanism of ambophily was helpful to ensure cross-pollination. The additive mixed mating system could provide double reproductive assurance for this species. These reproductive characteristics were significant for the successful invasion and expansion of G. parviflora.

Genetic and Phenotypic Variation of Campylobacter jejuni NCTC11168 Caused by flhA Mutation during Laboratory Passage.

Objective: Campylobacter jejuni NCTC11168 is commonly used as a standard strain for flagellar biosynthesis research. In this report, two distinguished phenotypic isolates (CJ1Z, flhA mutant strain, lawn; CJ2S, flhA complemented strain, normal colony) appeared during laboratory passages for NCTC11168. Methods: Phenotypic assessments, including motility plates, transmission electron microscopy, biofilm formation assay, autoagglutination assay, and genome re-sequencing for these two isolates (CJ1Z, flhA mutant strain; CJ2S, flhA complemented strain) were carried out in this study. Results: Transmission electron microscopy revealed that the flagellum was lost in CJ1Z. Phenotypic assessments and genome sequencing of the two isolates were performed in this study. The capacity for biofilm formation, colony auto-agglutination, and isolate motility was reduced in the mutant CJ1Z. Comparative genomic analysis indicated a unique native nucleotide insertion in flhA (nt, 2154) that caused the I719Y and I720Y mutations and early truncation in flhA. Conclusion: FlhA has been found to influence the expression of flagella in C. jejuni. To the best of our knowledge, this is the first study to describe the function of the C-terminal of this protein.

Peutz-Jeghers syndrome without STK11 mutation may correlate with less severe clinical manifestations in Chinese patients.

BACKGROUND: Peutz-Jeghers syndrome (PJS) is an autosomal dominant genetic disease with skin mucosal pigment spots and gastrointestinal (GI) multiple hamartoma polyps as clinical characteristics. At present, it is considered that the germline mutation of STK11 gene is the genetic cause of PJS. However, not all PJS patients can be detected STK11 germline mutations. The specific clinical characteristics of these PJS patients without STK11 mutation is an interesting clinical question. Or, like wild type GI stromal tumor, whether these PJS without STK11 mutation are also called PJS is worth discussing. Therefore, we designed the study to understand the clinical characteristics of these PJS patients without STK11 mutation. AIM: To investigates whether PJS patients with known STK11 mutations have a more severe spectrum of clinical phenotypes compared to those without. METHODS: A total of 92 patients with PJS admitted to the Air Force Medical Center from 2010 to 2022 were randomly selected for study. Genomic DNA samples were extracted from peripheral blood samples, and pathogenic germline mutations of STK11 were detected by high-throughput next-generation gene sequencing. Clinical-pathologic manifestations of patients with and without STK11/LKB1 mutations were compared. RESULTS: STK11 germline mutations were observed in 73 patients with PJS. Among 19 patients with no detectable STK11 mutations, six had no pathogenic germline mutations of other genes, while 13 had other genetic mutations. Compared with PJS patients with STK11 mutations, those without tended to be older at the age of initial treatment, age of first intussusception and age of initial surgery. They also had a lower number of total hospitalizations relating to intussusception or intestinal obstruction, and a lower load of small intestine polyps. CONCLUSION: PJS patients without STK11 mutations might have less severe clinical-pathologic manifestations than those with.

Reduced electron relaxation time of perovskite films via g-C3N4 quantum dot doping for high-performance perovskite solar cells.

Perovskite film-quality is a crucial factor to improve the photovoltaic properties of perovskite solar cells, which is closely related to the morphology of crystallization grain size of the perovskite layer. However, defects and trap sites are inevitably generated on the surface and at the grain boundaries of the perovskite layer. Here, we report a convenient method for preparing dense and uniform perovskite films, employing g-C3N4 quantum dots doped into the perovskite layer by regulating proper proportions. This process produces perovskite films with dense microstructures and flat surfaces. As a result, the higher fill factor (0.78) and a power conversion efficiency of 20.02% are obtained by the defect passivation of g-C3N4QDs.

Unconventional Bilateral Compressive Strained Ni-Ir Interface Synergistically Accelerates Alkaline Hydrogen Oxidation.

The alkaline hydrogen oxidation reaction (HOR) involves the coupling of adsorbed hydrogen (Had) and hydroxyl (OHad) species and is thus orders of magnitude slower than that in acid media. According to the Sabatier principle, developing electrocatalysts with appropriate binding energy for both intermediates is vital to accelerating the HOR though it is still challenging. Herein, we propose an unconventional bilateral compressive strained Ni-Ir interface (Ni-Ir(BCS)) as efficient synergistic HOR sites. Density functional theory (DFT) simulations reveal that the bilateral compressive strain effect leads to the appropriate adsorption for both Had and OHad, enabling their coupling thermodynamically spontaneous and kinetically preferential. Such Ni-Ir(BCS) is experimentally achieved by embedding sub-nanometer Ir clusters in graphene-loaded high-density Ni nanocrystals (Ni-Ir(BCS)/G). As predicted, it exhibits a HOR mass activity of 7.95 and 2.88 times those of commercial Ir/C and Pt/C together with much enhanced CO tolerance, respectively, ranking among the most active state-of-the-art HOR catalysts. These results provide new insights into the rational design of advanced electrocatalysts involving coordinated adsorption and activation of multiple reactants.