Combustion conditions influence toxicity of flame-generated soot to ocular (ARPE-19) cells.

Soot is a prevalent aerosol found both indoors and outdoors that has several sources, such as natural (e.g., wildfires), civilian (e.g., cooking), or military (e.g., burn pit operation). Additionally, within the sources, factors that influence the physicochemical properties of the soot include combustion temperature, oxygen availability, and fuel type. Being able to reproduce soot in the laboratory and systematically assess its toxicity is important in the pursuit of elucidating pathologies associated with its exposure. Of the organs of interest, we targeted the eye given the scant attention received. Yet, air pollution constituents such as soot have been linked to diseases such as age-related macular degeneration and proliferative vitreoretinopathy. We developed a bench-scale system to synthesize different types of soot, that is, soot with a systematically varied physical attributes or chemical composition. We used common analytical techniques to probe such properties, and used statistical analyses to correlate them with toxicity in vitro using ARPE-19 cells. Within the range of flame conditions studied, we find that soot toxicity increases with increasing oxygen concentration in fuel-rich premixed flames, and weakly increases with decreasing flame temperature. Additionally, soot particles produced in premixed flames are generally smaller in size, exhibit a lesser fractal structure, and are considerably more toxic to ARPE-19 cells than soot particles produced in non-premixed flames.

Changes in relative histone abundance and heterochromatin in αA-crystallin and αB-crystallin knock-in mutant mouse lenses.

OBJECTIVE: Understanding the mechanisms of cataract formation is important for age-related and hereditary cataracts caused by mutations in lens protein genes. Lens proteins of the crystallin gene families α-, ß-, and γ-crystallin are the most abundant proteins in the lens. Single point mutations in crystallin genes cause autosomal dominant cataracts in multigenerational families. Our previous proteomic and RNAseq studies identified genes and proteins altered in the early stages of cataract formation in mouse models. Histones H2A, H2B, and H4 increase in abundance in αA- and αB-crystallin mutant mouse lenses and in cultured cells expressing the mutant form of αA-crystallin linked with hereditary cataracts. RESULTS: In this study of histones in mutant lenses, we extracted histones from adult mouse lenses from cryaa-R49C and cryab-R120G mutant knock-in mice. We characterized the histones using matrix-assisted laser desorption/ionization time of flight (MALDI-TOF)-mass spectrometric analysis and gel electrophoresis and characterized the lens nucleus morphology using electron microscopy (EM). The relative abundance of histone H3 protein decreased in lenses from cryaa-R49C mutant mice and the relative abundance of histone H2 increased in these lenses. Electron microscopy of nuclei from cryaa-R49C-homozygous mutant mouse lenses revealed a pronounced alteration in the distribution of heterochromatin.

Creatine kinase/α-crystallin interaction functions in cataract development.

Creatine kinase (CK) is an energy storage enzyme that plays an important role in energy metabolism. CK/phosphocreatine functions as an energy buffer and links ATP production sites with ATP utilization sites. Several key mutations in the αA-crystallin (cryaa) and αB-crystallin (cryab) genes have been linked with autosomal-dominant, hereditary human cataracts. The cryaa-R49C mutation was identified in a four-generation Caucasian family. We previously identified an increase in the quantity of CK complexed with α-crystallin in the lenses of knock-in mice expressing the cryaa-R49C mutation using proteomic analyses. Increased levels of CK in postnatal cataractous lenses may indicate increased ATP requirements during early cataract development. To gain a further understanding of the relationship between CK and α-crystallin, we investigated whether α-crystallin interacts with and forms complexes with CK, in vitro. Isothermal titration calorimetry (ITC) showed that each CK dimer bound to 28 α-crystallin subunits, with a Kd of 3.3 × 10-7 M, and that the interaction between α-crystallin and CK was endothermic, thermodynamically favorable, and entropy-driven. High-salt concentrations did not affect the interaction between CK and α-crystallin, suggesting that the interaction between CK and α-crystallin is primarily hydrophobic. Gel permeation chromatography (GPC) detected water-soluble α-crystallin and CK complexes, as determined by increased light scattering after complex formation. In addition, CK and α-crystallin formed partially-water-insoluble, high-molecular-mass complexes. Enzyme-linked immunosorbent assay (ELISA)-based enzymatic activity analyses of lens homogenates showed a 17-fold increase in CK activity in the postnatal lenses of cryaa-R49C knock-in mice. These studies indicate that the interaction between α-crystallin and CK is functionally important and that increased CK levels may be necessary to meet the increased ATP demands of ATP-dependent functions in cataractous lenses.

Mechanism of Action of VP1-001 in cryAB(R120G)-Associated and Age-Related Cataracts.

Purpose: We previously identified an oxysterol, VP1-001 (also known as compound 29), that partially restores the transparency of lenses with cataracts. To understand the mechanism of VP1-001, we tested the ability of its enantiomer, ent-VP1-001, to bind and stabilize αB-crystallin (cryAB) in vitro and to produce a similar therapeutic effect in cryAB(R120G) mutant and aged wild-type mice with cataracts. VP1-001 and ent-VP1-001 have identical physicochemical properties. These experiments are designed to critically evaluate whether stereoselective binding to cryAB is required for activity. Methods: We compared the binding of VP1-001 and ent-VP1-001 to cryAB using in silico docking, differential scanning fluorimetry (DSF), and microscale thermophoresis (MST). Compounds were delivered by six topical administrations to mouse eyes over 2 weeks, and the effects on cataracts and lens refractive measures in vivo were examined. Additionally, lens epithelial and fiber cell morphologies were assessed via transmission electron microscopy. Results: Docking studies suggested greater binding of VP1-001 into a deep groove in the cryAB dimer compared with ent-VP1-001. Consistent with this prediction, DSF and MST experiments showed that VP1-001 bound cryAB, whereas ent-VP1-001 did not. Accordingly, topical treatment of lenses with ent-VP1-001 had no effect, whereas VP1-001 produced a statistically significant improvement in lens clarity and favorable changes in lens morphology. Conclusions: The ability of VP1-001 to bind native cryAB dimers is important for its ability to reverse lens opacity in mouse models of cataracts.

Bioinspired Fibrillary Hydrogel with Controlled Swelling Behavior: Applicability as an Artificial Vitreous.

The vitreous humor of the eye is mainly composed of fibrillary collagen and semiflexible hyaluronic acid (HA). To mimic this macromolecular composition of the vitreous, we previously developed an injectable two-component hydrogel composed of a fibrillary gellan and a semiflexible polyelectrolyte, poly[methacrylamide-co-(methacrylic acid)], both endowed with thiol cross-linkers. We optimized the hydrogel formulations for optical, physical, mechanical, and transport properties approximating those of the vitreous. Here, we studied 11 hydrogel formulations with varying concentrations of each component, and, as expected, we found that they all swelled in physiological solution. The two formulations that most closely matched the vitreous properties were investigated further. Judged against nonsurgical control and silicone oil, a clinically accepted vitreous replacement, both hydrogel formulations were biocompatible in rabbits for 30 days. Both hydrogels maintained optical clarity, physiological intraocular pressure, and intact retinal layers that displayed normal electroretinography. The swelling behavior of the gel led us to postulate that the native vitreous may also exhibit controlled swelling, where ionic HA's swelling capacity is restricted by fibrillary collagen. In conclusion, the two hydrogels merit further in vivo evaluation as an artificial vitreous for an extended duration and additionally in mini-pigs for their similarity to human eyes in size.

In vitro interactions of histones and α-crystallin.

The aggregation of crystallins in lenses is associated with cataract formation. We previously reported that mutant crystallins are associated with an increased abundance of histones in knock-in and knockout mouse models. However, very little is known about the specific interactions between lens crystallins and histones. Here, we performed in vitro analyses to determine whether α-crystallin interacts with histones directly. Isothermal titration calorimetry revealed a strong histone-α-crystallin binding with a Kd of 4 × 10-7 M, and the thermodynamic parameters suggested that the interaction was both entropy and enthalpy driven. Size-exclusion chromatography further showed that histone-α-crystallin complexes are water soluble but become water insoluble as the concentration of histones is increased. Right-angle light scattering measurements of the water-soluble fractions of histone-α-crystallin mixtures showed a decrease in the oligomeric molecular weight of α-crystallin, indicating that histones alter the oligomerization of α-crystallin. Taken together, these findings reveal for the first time that histones interact with and affect the solubility and aggregation of α-crystallin, indicating that the interaction between α-crystallin and histones in the lens is functionally important.

Probing the changes in gene expression due to α-crystallin mutations in mouse models of hereditary human cataract.

The mammalian eye lens expresses a high concentration of crystallins (α, ß and γ-crystallins) to maintain the refractive index essential for lens transparency. Crystallins are long-lived proteins that do not turnover throughout life. The structural destabilization of crystallins by UV exposure, glycation, oxidative stress and mutations in crystallin genes leads to protein aggregation and development of cataracts. Several destabilizing mutations in crystallin genes are linked with human autosomal dominant hereditary cataracts. To investigate the mechanism by which the α-crystallin mutations Cryaa-R49C and Cryab-R120G lead to cataract formation, we determined whether these mutations cause an altered expression of specific transcripts in the lens at an early postnatal age by RNA-seq analysis. Using knock-in mouse models previously generated in our laboratory, in the present work, we identified genes that exhibited altered abundance in the mutant lenses, including decreased transcripts for Clic5, an intracellular water channel in Cryaa-R49C heterozygous mutant lenses, and increased transcripts for Eno1b in Cryab-R120G heterozygous mutant lenses. In addition, RNA-seq analysis revealed increased histones H2B, H2A, and H4 gene expression in Cryaa-R49C mutant lenses, suggesting that the αA-crystallin mutation regulates histone expression via a transcriptional mechanism. Additionally, these studies confirmed the increased expression of histones H2B, H2A, and H4 by proteomic analysis of Cryaa-R49C knock-in and Cryaa;Cryab gene knockout lenses reported previously. Taken together, these findings offer additional insight into the early transcriptional changes caused by Cryaa and Cryab mutations associated with autosomal dominant human cataracts, and indicate that the transcript levels of certain genes are affected by the expression of mutant α-crystallin in vivo.

Preparation and Characterization of Biomimetic ß-Lens Crystallins Using Single-Chain Polymeric Nanoparticles.

Presbyopia, the inability to focus at arm's length, and cataracts that cloud vision are associated primarily with changes in the mechanical and optical properties of the lens. The optical properties, particularly the refractive index, of the human lens originate from the cytoplasm of the lens fiber, which contains a highly concentrated solution (∼40%) of globular proteins referred to as α, ß, and γ crystallins, of which ß is the most abundant. In this study, we focus on the synthesis and characterization of a ß-crystallin biomimetic in an effort to understand and develop treatments for presbyopia and cataract. Polyacrylamide was used as a protein analogue. The side chains were endowed with aromatic and acidic functionality. Acrylic acid was incorporated into the copolymer and cross-linked with diamines to form nanoparticles. The composition and cross-linking condition of the biomimetic copolymers were optimized to match the hydrodynamic radius (Rh), refractive index, size, density, and intrinsic and dynamic viscosities with those of ßhigh lens crystallins. The refractive indices and densities of the nanoparticles' dispersion at different concentrations matched that of ßhigh lens crystallins, and the viscosity of the nanoparticles approached that of ßhigh lens crystallins. The biocompatibility findings for primary porcine retinal pigment epithelial (ppRPE) cells and porcine lens epithelial (pLE) cells showed both cell types tolerated up to 30 mg/mL of nanoparticles. These materials have the potential for use as replacements for the crystallins in developing an accommodating intraocular lens nanocomposite hydrogel that closely replicates the natural autofocusing ability of the original.

Synthesis and characterization of in situ forming anionic hydrogel as vitreous substitutes.

The natural vitreous is a biological hydrogel consisting primarily of a collagen and anionic hyaluronate. It is surgically removed in many ocular diseases and replaced with fluids, gases, or silicone oils. We have been interested in developing synthetic hydrogels as vitreous substitutes. In this study, we combined the stiffness and hydrophobicity of polymethacrylamide (PMAM) and the anionic nature of polymethacrylate (PMAA) to make copolymers that would mimic the natural vitreous. We used bis-methacryloyl cystamine (BMAC) to introduce thiol groups for reversible crosslink. The Mn of copolymers ranged from ∼100 k to ∼200 k Da (polydisperisty index of 1.47-2.63) and their composition as determined by titration, 1 H NMR and disulfide test were close to the feed ratio. The reactivities of monomers were as follows: MAM > MAA ∼ BMAC. Copolymers with higher MAA contents gelled faster, swelled more, and had higher storage modulus (1.5 to 100 Pa) comparable to that of the natural vitreous. We evaluated the biocompatibility of copolymers by electric cell-substrate impedance sensing (ECIS) using human retinal pigment epithelial cells, primary porcine retinal pigmented epithelial cells, human microvascular endothelial cells adult dermis, and a fibroblast line 3T3. The biocompatibility decreases as the content of BMAC increases. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 977-988, 2017.

Biomimetic hydrogel with tunable mechanical properties for vitreous substitutes.

UNLABELLED: The vitreous humor of the eye is a biological hydrogel principally composed of collagen fibers interspersed with hyaluronic acid. Certain pathological conditions necessitate its removal and replacement. Current substitutes, like silicone oils and perfluorocarbons, are not biomimetic and have known complications. In this study, we have developed an in situ forming two-component biomimetic hydrogel with tunable mechanical and osmotic properties. The components are gellan, an analogue of collagen, and poly(methacrylamide-co-methacrylate), an analogue of hyaluronic acid; both endowed with thiol side groups. We used response surface methodology to consider seventeen possible hydrogels to determine how each component affects the optical, mechanical, sol-gel transition temperature and swelling properties. The optical and physical properties of the hydrogels were similar to vitreous. The shear storage moduli ranged from 3 to 358Pa at 1Hz and sol-gel transition temperatures from 35.5 to 43°C. The hydrogel had the ability to remain swollen without degradation for four weeks in vitro. Three hydrogels were tested for biocompatibility on primary porcine retinal pigment epithelial cells, human retinal pigment epithelial cells, and fibroblast (3T3/NIH) cells, by electric cell-substrate impedance sensing system. The two-component hydrogels allowed for the tuning and optimizing of mechanical, swelling, and transition temperature to obtain three biocompatible hydrogels with properties similar to the vitreous. Future studies include testing of the optimized hydrogels in animal models for use as a long-term substitute, whose preliminary results are mentioned. STATEMENT OF SIGNIFICANCE: Although hydrogels are researched as long-term vitreous substitute, none have advanced sufficiently to reach clinical application. Our work focuses on the development of a novel two component in situ forming hydrogel that bio-mimic the natural vitreous. Our thiol-containing copolymers can be injected as an aqueous solution into the vitreous cavity wherein, at physiological temperature, the rigid component will instantaneously form a physical gel imbedding the random coil copolymer. Upon subsequent oxidation, the two components will form disulfide cross-links and a stable reversible hydrogel capable of providing osmotic pressure to reattach the retina. It may be left in the eye permanently or easily removed by injection of a simple reducing agent to cleave the disulfide bonds, rather than surgery. This contribution is significant because it is expected to provide patients with a much better quality of life by improving surgical outcomes, creating much less post-operative burden, and reducing the need for secondary surgeries.

The effect of ankle joint immobilization on lower limb venous flow.

BACKGROUND: Below-knee cast immobilization is associated with an increased risk of developing deep vein thrombosis secondary to venous stasis. We investigated the effect of weight-bearing in a below-knee cast or pneumatic walking boot on lower limb venous blood flow. METHODS: Duplex ultrasonography was used to measure venous blood flow in the popliteal vein of 10 healthy volunteers. Venous blood flow was measured while at rest, ambulating non-weight-bearing, partial weight-bearing, and full weight-bearing. Measurements were performed without ankle joint immobilization, with the ankle immobilized in a neutral cast, and with the ankle immobilized in a pneumatic walking boot in both neutral and equinus. RESULTS: There was no significant reduction in venous blood flow measurements between full weight-bearing without ankle joint immobilization and full weight-bearing in a neutral cast or neutral pneumatic walking boot. However, venous blood flow was reduced when partial weight-bearing (50%) and when full weight-bearing in a pneumatic walking boot in equinus. CONCLUSION: These results demonstrate that venous blood flow returned to normal levels when the subjects were permitted to fully bear weight in below-knee casts or walking boots, provided that the ankle joint was not in equinus. CLINICAL RELEVANCE: Weight-bearing status and ankle joint position should be appreciated during decisions for the provision of chemical thromboprophylaxis.

Comparative proteomic analysis identifies age-dependent increases in the abundance of specific proteins after deletion of the small heat shock proteins αA- and αB-crystallin.

Mice with deletion of genes for small heat shock proteins αA- and αB-crystallin (αA/αB(-/-)) develop cataracts. We used proteomic analysis to identify lens proteins that change in abundance after deletion of these α-crystallin genes. Wild-type (WT) and αA/αB(-/-) knockout (DKO) mice were compared using two-dimensional difference gel electrophoresis and mass spectrometric analysis, and protein identifications were validated by Mascot proteomic software. The abundance of histones H2A, H4, and H2B fragment, and a low molecular weight ß1-catenin increased 2-3-fold in postnatal day 2 lenses of DKO lenses compared with WT lenses. Additional major increases were observed in abundance of ßB2-crystallin and vimentin in 30-day-old lenses of DKO animals compared with WT animals. Lenses of DKO mice were comprised of nine protein spots containing ßB2-crystallin at 10-40-fold higher abundance and three protein spots containing vimentin at ≥2-fold higher abundance than in WT lenses. Gel permeation chromatography identified a unique 328 kDa protein in DKO lenses, containing ß-crystallin, demonstrating aggregation of ß-crystallin in the absence of α-crystallins. Together, these changes provide biochemical evidence for possible functions of specific cell adhesion proteins, cytoskeletal proteins, and crystallins in lens opacities caused by the absence of the major chaperones, αA- and αB-crystallins.

A knock-in mouse model for the R120G mutation of αB-crystallin recapitulates human hereditary myopathy and cataracts.

An autosomal dominant missense mutation in αB-crystallin (αB-R120G) causes cataracts and desmin-related myopathy, but the underlying mechanisms are unknown. Here, we report the development of an αB-R120G crystallin knock-in mouse model of these disorders. Knock-in αB-R120G mice were generated and analyzed with slit lamp imaging, gel permeation chromatography, immunofluorescence, immunoprecipitation, histology, and muscle strength assays. Wild-type, age-matched mice were used as controls for all studies. Both heterozygous and homozygous mutant mice developed myopathy. Moreover, homozygous mutant mice were significantly weaker than wild-type control littermates at 6 months of age. Cataract severity increased with age and mutant gene dosage. The total mass, precipitation, and interaction with the intermediate filament protein vimentin, as well as light scattering of αB-crystallin, also increased in mutant lenses. In skeletal muscle, αB-R120G co-aggregated with desmin, became detergent insoluble, and was ubiquitinated in heterozygous and homozygous mutant mice. These data suggest that the cataract and myopathy pathologies in αB-R120G knock-in mice share common mechanisms, including increased insolubility of αB-crystallin and co-aggregation of αB-crystallin with intermediate filament proteins. These knock-in αB-R120G mice are a valuable model of the developmental and molecular biological mechanisms that underlie the pathophysiology of human hereditary cataracts and myopathy.

Sciatic nerve blockade: a survey of orthopaedic foot and ankle specialists in North America and the United Kingdom.

BACKGROUND: Sciatic nerve blocks are used to reduce post-operative pain and allow early discharge for patients undergoing foot and ankle surgery. This study aimed to identify the utilization of this procedure in the US and UK and to establish the standard of care with respect to the level of anesthesia that the patient is under and use of ultrasound localization when performing sciatic nerve blocks. MATERIALS AND METHODS: A survey of current committee members of AOFAS and members of BOFAS. RESULTS: Two hundred sixty-three surgeons were contacted with a response rate of 44%. Eighty-two percent commonly used a sciatic nerve blockade. Sixty-nine percent never or only sometimes used ultrasonography and variable levels of nerve stimulation were used. Forty-two percent where happy to have the block performed under full anesthesia. There were significant differences between British and American practices regarding the level of nerve stimulation and the level of anesthesia used. The most common complication cited was prolonged anesthesia of which the vast majority spontaneously resolved. Performing blocks awake or sedated did not seem to alter number of complications seen. CONCLUSION: This study represents a current practice review of sciatic nerve blocks performed amongst senior foot and ankle surgeons. Although no absolute consensus has been reached as to the use of ultrasound or whether the patient needs to be awake for the procedure, it is clear that the standard of care does not mandate either of these. The differences between US and UK practice are probably cultural and do not appear to affect the number of complications encountered.

Surgical anatomy of the proximal release of the gastrocnemius: a cadaveric study.

BACKGROUND: The importance of isolated gastrocnemius contracture in disorders of the foot and ankle has been established in recent years. The aim of this study was to describe the proximal anatomical approach to the medial and lateral heads of gastrocnemius and to compare the sizes of the medial and lateral heads of the gastrocnemius. MATERIALS AND METHODS: 15 cadaveric extremities were dissected using a posterior approach 1 cm below the level of the skin crease. Proximity of cutaneous nerves and major vessels was noted. The heads of the gastrocnemius were dissected from their origin and the cross sectional anatomy was assessed. RESULTS: Approach to the medial head of gastrocnemius was safe. Conversely the variable anatomy of the nerves in the approach to the lateral head meant that extreme care must be taken if complications are to be avoided. The aponeurosis of the medial head of gastrocnemius was 2.4 times the cross-sectional area compared to the lateral head. CONCLUSION: In this study we describe a safe posterior approach to the medial aponeurosis of the gastrocnemius and also describe the different sizes of the medial and lateral gastrocnemius heads. CLINICAL RELEVANCE: We conclude that the approach to the medial head of gastrocnemius is free from neurovascular structures and that release of the medial head alone may be efficacious in the operative treatment of isolated gastrocnemius tightness that has failed non-operative treatment.

A facile synthesis of highly water-soluble, core-shell organo-silica nanoparticles with controllable size via sol-gel process.

A series of highly water-soluble organo-silica nanoparticles, ranging from 2 to 10nm in diameter, were synthesized by the cohydrolysis and copolycondensation reactions. omega-methoxy(polyethyleneoxy)propyltrimethoxysilane (PEG6-9) and hydroxymethyltriethoxysilane (HMTEOS) mixtures were catalyzed by sodium hydroxide in the presence of surfactant benzethonium chloride (BTC) with various ratios of PEG6-9/HMTEOS at room temperature. The synthesized organo-silica nanoparticles possess a core-shell structure with a core of organo-silica resulting from HMTEOS and a monolayer shell of PEG6-9. The chemo-physical characteristics of the particles were studied by gel permeation chromatography (GPC), Fourier transform infrared (FTIR) spectroscopy, (29)Si nuclear magnetic resonance (NMR), dynamic light scattering (DLS), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). The molecular weight and particle size of the particles increased with increasing HMTEOS molar ratios. The richest HMTEOS composition for the water-soluble particles was found to be HMTEOS:PEG6-9=80:20, where the particles had a 6nm diameter core and a 0.8nm thick shell. We propose that these water-soluble organo-silica nanoparticles will be suitable for biomedical applications.

Rabbit study of an in situ forming hydrogel vitreous substitute.

PURPOSE: An in situ forming hydrogel was evaluated as a potential vitreous substitute in rabbits. METHODS: The hydrogel used a disulfide cross-linker that was then reduced to produce an injectable thiol-containing polymer solution. The disulfide cross-links reformed by air oxidation of the thiols and produced a stable hydrogel once inside the eye. The polymer was clear, autoclavable, and could be stored easily in the presence of nitrogen gas. Capillary rheometry was used to measure the viscoelastic properties of the hydrogels and the porcine vitreous. Fourteen black rabbits underwent a pars plana, 25-gauge, three-port vitrectomy by a single surgeon with injection of a vitreous substitute. RESULTS: The refractive indices of the hydrogels were measured by refractometry and were shown to be close to 1.33, and the 2% hydrogel matched the mechanical properties of the natural vitreous humor. The reduced polymeric hydrogel was easily injectable through a small-gauge needle into the vitreous cavity and did not show any fragmentation. The material underwent gelation within the eye, remained optically clear, and appeared well tolerated clinically. Slit lamp examination, dilated fundus examination, and electroretinograms showed no evidence of vitritis, uveitis, or endophthalmitis after 1 week. Histopathologic evaluation did not reveal any overt toxicity or gross morphologic changes in the retina. CONCLUSIONS: The fact that this process of in situ gelation gives rise to hydrogels that are biocompatible and physically and optically similar to the natural vitreous suggests its suitability as a permanent vitreous substitute. Hydrogel candidates will be further studied to evaluate long-term biocompatibility and degradation in vivo.

Comparison of the behavior of natural and refilled porcine lenses in a robotic lens stretcher.

The mechanism by which the eye dynamically changes focal distance (accommodation), and the mechanism by which this ability is lost with age (presbyopia), are still contested. Due to inherent confounding factors in vivo, in vitro measurements have been undertaken using a robotic lens stretcher to examine these mechanisms as well as the efficacy of lens refilling - a proposed treatment for presbyopia. Dynamic forces, anterior and posterior curvatures, and lens thickness are all correlated for young natural and refilled porcine lenses. Comparisons are made to lenses refilled with a homogeneous polymer system. The amplitude of accommodation of the young porcine lens is very small such that it may be a suitable model for presbyopia. The behavior of refilled lenses was highly dependent on the refill volume. The volume could be tuned to maximize accommodative amplitude in the refilled lens.

Mechanism of insolubilization by a single-point mutation in alphaA-crystallin linked with hereditary human cataracts.

AlphaA-crystallin is a small heat shock protein that functions as a molecular chaperone and a lens structural protein. The R49C single-point mutation in alphaA-crystallin causes hereditary human cataracts. We have previously investigated the in vivo properties of this mutant in a gene knock-in mouse model. Remarkably, homozygous mice carrying the alphaA-R49C mutant exhibit nearly complete lens opacity concurrent with small lenses and small eyes. Here we have investigated the 90 degrees light scattering, viscosity, refractive index, and bis-ANS fluorescence of lens proteins isolated from the alphaA-R49C mouse lenses and found that the concentration of total water-soluble proteins showed a pronounced decrease in alphaA-R49C homozygous lenses. Light scattering measurements on proteins separated by gel permeation chromatography showed a small amount of high-molecular mass aggregated material in the void volume which still remains soluble in alphaA-R49C homozygous lens homogenates. An increased level of binding of beta- and gamma-crystallin to the alpha-crystallin fraction was observed in alphaA-R49C heterozygous and homozygous lenses but not in wild-type lenses. Quantitative analysis with the hydrophobic fluorescence probe bis-ANS showed a pronounced increase in fluorescence yield upon binding to alpha-crystallin from mutant as compared with the wild-type lenses. These results suggest that the decrease in the solubility of the alphaA-R49C mutant protein was due to an increase in its hydrophobicity and supra-aggregation of alphaA-crystallin that leads to cataract formation. Our study further shows that analysis of mutant proteins from the mouse model is an effective way to understand the mechanism of protein insolubilization in hereditary cataracts.