ABSTRACT
(1) Lipases are catalysts widely applied in industrial fields. To sustain the harsh treatments in industries, optimizing lipase activities and thermal stability is necessary to reduce production loss. (2) The thermostability of Thermomyces lanuginosus lipase (TLL) was evaluated via B-factor analysis and consensus-sequence substitutions. Five single-point variants (K24S, D27N, D27R, P29S, and A30P) with improved thermostability were constructed via site-directed mutagenesis. (3) The optimal reaction temperatures of all the five variants displayed 5 °C improvement compared with TLL. Four variants, except D27N, showed enhanced residual activities at 80 °C. The melting temperatures of three variants (D27R, P29S, and A30P) were significantly increased. The molecular dynamics simulations indicated that the 25-loop (residues 24-30) in the N-terminus of the five variants generated more hydrogen bonds with surrounding amino acids; hydrogen bond pair D254-I255 preserved in the C-terminus of the variants also contributes to the improved thermostability. Furthermore, the newly formed salt-bridge interaction (R27 E56) in D27R was identified as a crucial determinant for thermostability. (4) Our study discovered that substituting residues from the 25-loop will enhance the stability of the N-terminus and C-terminus simultaneously, restrict the most flexible regions of TLL, and result in improved thermostability.
Subject(s)
Eurotiales , Lipase , Lipase/metabolism , Eurotiales/genetics , Eurotiales/metabolism , Temperature , Mutagenesis, Site-Directed , Enzyme StabilityABSTRACT
The rare northward migration of wild Asian elephants in Xishuangbanna, China, has attracted global attention. Elephant migration is a complex ecological process, and the factors driving this long-distance migration remain elusive. In this study, fresh fecal samples were collected from both captive and wild Asian elephants, along with breastfed calves residing within the Wild Elephant Valley of Xishuangbanna. Our aim was to investigate the relationship between diet, gut microbiota, and migration patterns in Asian elephants through comprehensive metagenomic sequencing analyses. Among the breastfed Asian elephant group, Bacteroidales and Escherichia emerged as the dominant bacterial taxa, while the primary carbohydrate-active enzymes (CAZymes) enriched in this group were GH2, GH20, GH92, GH97, GH38, GH23, and GH43, aligning with their dietary source, namely breast milk. The bacterial taxa enriched in captive Asian elephants (CAEs) were mainly Butyrivibrio, Treponema, and Fibrobacter, and the enriched lignocellulose-degrading enzymes mainly included GH25, GH10, GH9, and cellulase (EC 3.2.1.4). These findings are consistent with the high-fiber diet of captive elephants. In contrast, the main bacterial taxa enriched in wild Asian elephants (WAEs) were Ruminococcus and Eubacterium, and the enriched CAZymes included GH109, GH20, GH33, GH28, GH106, and GH39. The abundance of lignocellulose-degrading bacteria and CAZyme content was low in WAEs, indicating challenges in processing high-fiber foods and explaining the low-fiber diet in this group. These findings suggest that wild elephant herds migrate in search of nutritionally suitable, low-fiber food sources.
ABSTRACT
Proteases have been widely employed in many industrial processes. In this work, we aimed to improve the thermostability of the serine protease PB92 from Bacillus alcalophilus to meet the high-temperature requirements of biotechnological treatments. Eight mutation sites (N18, S97-S101, E110, and R143) were identified, and 21 mutants were constructed from B-factor comparison and multiple sequence alignment and expressed via Bacillus subtilis. Among them, fifteen mutants exhibited increased half-life (t1/2) values at 65 °C (1.13-31.61 times greater than that of the wild type). Based on the composite score of enzyme activity and thermostability, six complex mutants were implemented. The t1/2 values of these six complex mutants were 2.12-10.05 times greater than that of the wild type at 65 °C. In addition, structural analysis revealed that the increased thermal stability of complex mutants may be related to the formation of additional hydrophobic interactions due to increased hydrophobicity and the decreased flexibility of the structure. In brief, the thermal stability of the complex mutants N18L/R143L/S97A, N18L/R143L/S99L, and N18L/R143L/G100A was increased 4-fold, which reveals application potential in industry.
ABSTRACT
Proteases have been widely applied in various industries, including tanning, silk, feed, medicine, food, and environmental protection. Herein, the protease EA1 (GenBank accession no. U25630.1) was successfully expressed in Bacillus subtilis and demonstrated to function as a Ca2+- and Mg2+-dependent hyperthermostable neutral protease. At 80 °C, its half-life (t1/2) in the presence of 10 mM Mg2+ and Ca2+ was 50.4-fold longer than that in their absence (7.4 min), which can be explained by structural analysis. Compared with the currently available commercial proteases, protease EA1 has obvious advantages in heat resistance. The largest peptide library was used to enhance the extracellular expression of protease EA1 via constructing and screening 244 signal peptides (SPs). Eleven SPs with high yields of protease EA1 were identified from 5000 clones using a high-throughput assay. Specifically, the enzyme activity of protease produced by the strain (217.6 U/mL) containing the SP XynD was 5.2-fold higher than that of the strain with the initial SP. In brief, the protease is a potential candidate for future use in the high-temperature industry.
Subject(s)
Bacillus subtilis , Peptide Hydrolases , Bacillus subtilis/metabolism , Peptide Hydrolases/metabolism , Protein Sorting Signals/genetics , Endopeptidases/metabolism , Hot Temperature , Bacterial Proteins/genetics , Bacterial Proteins/metabolismABSTRACT
Lipases are remarkable biocatalysts and are broadly applied in many industry fields because of their versatile catalytic capabilities. Considering the harsh biotechnological treatment of industrial processes, the activities of lipase products are required to be maintained under extreme conditions. In our current study, Gibbs free energy calculations were performed to predict potent thermostable Thermomyces lanuginosus lipase (TLL) variants by Rosetta design programs. The calculating results suggest that engineering on R209 may greatly influence TLL thermostability. Accordingly, ten TLL mutants substituted R209 were generated and verified. We demonstrate that three out of ten mutants (R209H, R209M, and R209I) exhibit increased optimum reaction temperatures, melting temperatures, and thermal tolerances. Based on molecular dynamics simulation analysis, we show that the stable hydrogen bonding interaction between H198 and N247 stabilizes the local configuration of the 250-loop in the three R209 mutants, which may further contribute to higher rigidity and improved enzymatic thermostability. Our study provides novel insights into a single residue, R209, and the 250-loop, which were reported for the first time in modulating the thermostability of TLL. Additionally, the resultant R209 variants generated in this study might be promising candidates for future-industrial applications.
Subject(s)
DEET , Eurotiales , Eurotiales/genetics , Lipase/chemistry , Lipase/genetics , MutationABSTRACT
BACKGROUND: Carbamate pesticides have been widely used in agricultural and forestry pest control. The large-scale use of carbamates has caused severe toxicity in various systems because of their toxic environmental residues. Carbaryl is a representative carbamate pesticide and hydrolase/carboxylesterase is the initial and critical enzyme for its degradation. Whole-cell biocatalysts have become a powerful tool for environmental bioremediation. Here, a whole cell biocatalyst was constructed by displaying a novel carboxylesterase/hydrolase on the surface of Escherichia coli cells for carbaryl bioremediation. RESULTS: The carCby gene, encoding a protein with carbaryl hydrolysis activity was cloned and characterized. Subsequently, CarCby was displayed on the outer membrane of E. coli BL21(DE3) cells using the N-terminus of ice nucleation protein as an anchor. The surface localization of CarCby was confirmed by SDS-PAGE and fluorescence microscopy. The optimal temperature and pH of the engineered E. coli cells were 30 °C and 7.5, respectively, using pNPC4 as a substrate. The whole cell biocatalyst exhibited better stability and maintained approximately 8-fold higher specific enzymatic activity than purified CarCby when incubated at 30 °C for 120 h. In addition, ~ 100% and 50% of the original activity was retained when incubated with the whole cell biocatalyst at 4 â and 30 °C for 35 days, respectively. However, the purified CarCby lost almost 100% of its activity when incubated at 30 °C for 134 h or 37 °C for 96 h, respectively. Finally, approximately 30 mg/L of carbaryl was hydrolyzed by 200 U of the engineered E. coli cells in 12 h. CONCLUSIONS: Here, a carbaryl hydrolase-containing surface-displayed system was first constructed, and the whole cell biocatalyst displayed better stability and maintained its catalytic activity. This surface-displayed strategy provides a new solution for the cost-efficient bioremediation of carbaryl and could also have the potential to be used to treat other carbamates in environmental bioremediation.
Subject(s)
Escherichia coli , Pesticides , Biodegradation, Environmental , Carbaryl/metabolism , Carboxylesterase/genetics , Carboxylesterase/metabolism , Escherichia coli/metabolism , Pesticides/metabolismABSTRACT
OBJECTIVES: This study was aimed at engineering charged residues on the surface of Thermomyces lanuginosus lipase (TLL) to obtain TLL variant with elevated performance for industrial applications. RESULTS: Site-directed mutagenesis of eight charged amino acids on the TLL surface were conducted and substitutions on the negatively charged residues D111, D158, D165, and E239 were identified with elevated specific activities and biodiesel yields. Synergistic effect was not discovered in the double mutants, D111E/D165E and D165E/E239R, when compared with the corresponding single mutants. One TLL mutant, D165E, was identified with increased specific activity (456.60 U/mg), catalytic efficiency (kcat/Km: 44.14 s-1 mM-1), the highest biodiesel conversion yield (93.56%), and comparable thermostability with that of the TLL. CONCLUSIONS: Our study highlighted the importance of surface charge engineering in improving TLL activity and biodiesel production, and the resulting TLL mutant, D165E, is a promising candidate for biodiesel industry.
Subject(s)
Eurotiales/enzymology , Lipase/metabolism , Mutagenesis, Site-Directed/methods , Amino Acid Substitution , Biocatalysis , Biofuels , Enzymes, Immobilized/genetics , Enzymes, Immobilized/metabolism , Eurotiales/genetics , Fungal Proteins/metabolism , Lipase/genetics , Protein EngineeringABSTRACT
Protein and Enzyme Engineering is the core and required course for colleague students majored in biotechnology, which plays an important role in the professional training system. In accordance with the "Guidelines for the Development of Ideological Education in Higher Education Institutions" issued by the Ministry of Education, we explored the combination of course teaching with ideological education by considering the features of the biotechnology major and the course and setting up rational teaching objectives. This paper described the strategy, design, implementation and evaluation approaches that were used in the course of "Protein and Enzyme Engineering" to achieve a good integration. The practice starts from story-telling, discussion of life, case study, hot issues discussion, literature discussion and presentations. The scientific spirits, civic character, global vision, eco-civilization and legal consciousness, as well as their native land emotion and cultural confidence, were boosted. The natural integration of the ideological education into the whole process of this course helped to better achieve the goal of curriculum education while promoting teaching excellence.
Subject(s)
Curriculum , Universities , Biotechnology , Humans , StudentsABSTRACT
Xylanases have been applied in many industrial fields. To improve the activity and thermostability of the xylanase CDBFV from Neocallimastix patriciarum (GenBank accession no. KP691331), submodule C2 from hyperthermophilic CBM9_1-2 was inserted into the N- and/or C-terminal regions of the CDBFV protein (producing C2-CDBFV, CDBFV-C2, and C2-CDBFV-C2) by genetic engineering. CDBFV and the hybrid proteins were successfully expressed in Escherichia coli BL21 (DE3). Enzymatic property analysis indicates that the C2 submodule had a significant effect on enhancing the thermostability of the CDBFV. At the optimal temperature (60.0 °C), the half-lives of the three chimeras C2-CDBFV, CDBFV-C2, and C2-CDBFV-C2 are 1.5 times (37.5 min), 4.9 times (122.2 min), and 3.8 times (93.1 min) longer than that of wild-type CDBFV (24.8 min), respectively. More importantly, structural analysis and molecular dynamics (MD) simulation revealed that the improved thermal stability of the chimera CDBFV-C2 was on account of the formation of four relatively stable additional hydrogen bonds (S42-S462, T59-E277, S41-K463, and S44-G371), which increased the protein structure's stability. The thermostability characteristics of CDBFV-C2 make it a viable enzyme for industrial applications.
Subject(s)
Fungal Proteins/metabolism , Neocallimastix/metabolism , Xylosidases/metabolism , Enzyme Stability , Escherichia coli/genetics , Escherichia coli/metabolism , TemperatureABSTRACT
The recently discovered 340-cavity in influenza neuraminidase (NA) N6 and N7 subtypes has introduced new possibilities for rational structure-based drug design. However, the plasticity of the 340-loop (residues 342-347) and the role of the 340-loop in NA activity and substrate binding have not been deeply exploited. Here, we investigate the mechanism of 340-cavity formation and demonstrate for the first time that seven of nine NA subtypes are able to adopt an open 340-cavity over 1.8 µs total molecular dynamics simulation time. The finding that the 340-loop plays a role in the sialic acid binding pathway suggests that the 340-cavity can function as a druggable pocket. Comparing the open and closed conformations of the 340-loop, the side chain orientation of residue 344 was found to govern the formation of the 340-cavity. Additionally, the conserved calcium ion was found to substantially influence the stability of the 340-loop. Our study provides dynamical evidence supporting the 340-cavity as a druggable hotspot at the atomic level and offers new structural insight in designing antiviral drugs.
Subject(s)
Antiviral Agents/pharmacology , Drug Development , Neuraminidase/chemistry , Orthomyxoviridae/enzymology , Binding Sites , Calcium/chemistry , Ions , Models, Molecular , Molecular Dynamics Simulation , N-Acetylneuraminic Acid/chemistry , Principal Component Analysis , Protein Structure, Secondary , ThermodynamicsABSTRACT
The exploration and utilization of microbial salt-tolerant enzymatic and genetic resources are of great significance in the field of biotechnology and for the research of the adaptation of microorganisms to extreme environments. The presence of new salt-tolerant genes and enzymes in the microbial metagenomic library of the gastrointestinal tract has been confirmed through metagenomic technology. This paper aimed to identify and characterize enzymes that confer salt tolerance in the gastrointestinal tract microbe. By screening the fecal metagenomic library, 48 salt-tolerant clones were detected, of which 10 salt-tolerant clones exhibited stronger tolerance to 7% (wt/vol) NaCl and stability in different concentrations of NaCl [5%-9% (wt/vol)]. High-throughput sequencing and biological information analysis showed that 91 potential genes encoded proteins and enzymes that were widely involved in salt tolerance. Furthermore, two trehalose-6-phosphate hydrolase genes, namely, tre_P2 and tre_P3, were successfully cloned and expressed in Escherichia coli BL21 (DE3). By virtue of the substrate of p-nitrophenyl-α-D-glucopyranoside (pNPG) which can be specifically hydrolyzed by trehalose-6-phosphate hydrolase to produce glucose and p-nitrophenol, the two enzymes can act optimally at pH 7.5 and 30°C. Steady-state kinetics with pNPG showed that the K M and K cat values were 15.63 mM and 10.04 s-1 for rTRE_P2 and 12.51 mM and 10.71 s-1 for rTRE_P3, respectively. Characterization of enzymatic properties demonstrated that rTRE_P2 and rTRE_P3 were salt-tolerant. The enzymatic activity increased with increasing NaCl concentration, and the maximum activities of rTRE_P2 and rTRE_P3 were obtained at 4 and 3 M NaCl, respectively. The activities of rTRE_P2 increased by approximately 43-fold even after 24 h of incubation with 5 M NaCl. This study is the first to report the identification as well as molecular and biochemical characterization of salt-tolerant trehalose-6-phosphate hydrolase from the metagenomic library of the gastrointestinal tract. Results indicate the existence of numerous salt-tolerant genes and enzymes in gastrointestinal microbes and provide new insights into the salt-tolerant mechanisms in the gastrointestinal environment.
ABSTRACT
In order to improve the thermostability of lipases derived from Rhizopus chinensis, we identified lipase (Lipr27RCL) mutagenesis sites that were associated with enhanced flexibility based upon B-factor analysis and multiple sequence alignment. We found that two mutated isoforms (Lipr27RCL-K64N and Lipr27RCL-K68T) exhibited enhanced thermostability and improved residual activity, with respective thermal activity retention values of 37.88% and 48.20% following a 2 h treatment at 50°C relative to wild type Lipr27RCL. In addition, these Lipr27RCL-K64N and Lipr27RCL-K68T isoforms exhibited 2.4- and 3.0-fold increases in enzymatic half-life following a 90 min incubation at 60°C. Together these results indicate that novel mutant lipases with enhanced thermostability useful for industrial applications can be predicted based upon B-factor analysis and constructed via site-directed mutagenesis.
ABSTRACT
Xylanases, capable of hydrolyzing xylans which are abundant in nature, have been employed as important biocatalyst in many industrial processes. Xylanases with advantageous properties, especially excellent thermostability, are in high demand in industry. In this study, we aim to improve the thermostability of XynCDBFV, a fungal GH11 xylanase. To achieve this aim, we discovered residues 87-QNSS-90 with pronounced flexibility based on B-factor analysis, identified highly conserved residues 87-RGHT-90 in GH11 xylanases by multiple sequence alignment, and constructed four single mutants by substituting residues from 87 to 90 by site-directed mutagenesis. Temperature stability measurements showed promising enhancement of thermostability for all four single mutants, and the thermal tolerant ability from strong to weak is N88 G, S90 T, S89H, Q87R, XynCDBFV. Four single mutants all retained higher than 50% activities after incubation at the optimal temperature 60â for 1 h, while the retained activity for XynCDBFV was only 20.94% at the same condition. N88 G retained greater than 60% residual activity after incubation at 65â for 1 h, while the residual activity of XynCDBFV decreased rapidly, losing all activity after 45 min of incubation. Molecular dynamics simulations and structural analysis were applied to explore the heat-resistant mechanisms for mutants: novel hydrogen bonding interaction were discovered and accounted for the improved thermostability. Enzyme activity of the single mutants compromised with their thermostability and combined mutations displayed antagonistic effect due to the closed contact of the mutated residues. This study confirms that combining B-factor analysis and multiple sequence alignment is an effective strategy for obtaining a thermostable enzyme, and the negative findings help to recognize limitations in xylanase engineering for preferable properties.
Subject(s)
Mutant Proteins/genetics , Mutant Proteins/metabolism , Neocallimastix/enzymology , Protein Engineering , Xylans/metabolism , Xylosidases/genetics , Xylosidases/metabolism , Amino Acid Substitution , Enzyme Stability , Hot Temperature , Hydrolysis , Molecular Dynamics Simulation , Mutagenesis, Site-Directed , Mutant Proteins/chemistry , Sequence Alignment , Xylosidases/chemistryABSTRACT
A GH43 bifunctional ß-xylosidase encoding gene (XylRBM26) was cloned from Massilia sp. RBM26 and successfully expressed in Escherichia coli. Recombinant XylRBM26 exhibited ß-xylosidase and α-l-arabinofuranosidase activities. When 4-nitrophenyl-ß-d-xylopyranoside was used as a substrate, the enzyme reached optimal activity at pH 6.5 and 50°C and remained stable at pH 5.0-10.0. Purified XylRBM26 presented good salt tolerance and retained 96.6% activity in 3.5 M NaCl and 77.9% initial activity even in 4.0 M NaCl. In addition, it exhibited high tolerance to xylose with Ki value of 500 mM. This study was the first to identify and characterize NaCl-tolerant ß-xylosidase/α-l-arabinofuranosidase from the gut microbiota. The enzyme's salt, xylose, and alkali stability and resistance to various chemicals make it a potential biocatalyst for the saccharification of lignocellulose, the food industry, and industrial processes conducted in sea water.
Subject(s)
Gastrointestinal Microbiome , Genome, Bacterial , Glycoside Hydrolases/metabolism , Xylosidases/metabolism , Alkalies , Glycoside Hydrolases/genetics , Hydrogen-Ion Concentration , Substrate Specificity , Xylose/metabolism , Xylosidases/geneticsABSTRACT
Halenia elliptica is a popular Chinese medicinal herb that is used to treat jaundice disease and virus hepatitis, and its wild populations have been reduced significantly due to overharvesting recently. However, effective conservation could not be implemented because of the lack of genomic information and genetic markers. In this study, a de novo transcriptome of H elliptica was sequenced using the NGS Illumina, and 132 695 unigenes with the length >200 bp (base pairs) were obtained. Among them, a total of 32 109 unigenes were scanned to develop simple sequence repeats (SSRs). Based on NCBI (National Center for Biotechnology Information) nonredundant database (Nr), these SSR sequences were annotated and assigned into gene ontology categories. In addition, we designed 126 pairs of SSR primers for polymerase chain reaction amplification, of which 12 pairs were identified to be polymorphic among 40 individuals from 8 populations. We then used the 12 polymorphic SSRs to construct a UPGMA dendrogram of the 40 individuals. In addition, a significant correlation between the genetic relationship and the geographic distance was found, suggesting a phylogeographic structure in H elliptica. Moreover, 2 of these SSRs were also successfully amplified in a related species Veratrilla baillonii, suggesting their cross-species transferability. Generally, the SSR markers with high polymorphisms identified in this study provide valuable genetic resources and represent an initial step for exploring the genetic diversity and population histories of H elliptica and its related species.
ABSTRACT
High IgG-binding capacity of protein A affinity chromatography is crucial to its application in the antibody purification and autoantibody-associated disease treatment. An oriented immobilization strategy was used to covalently conjugate the recombinant protein A (rSpA) on the glutaraldehyde activated agarose. By controlling the glutaraldehyde concentration, pH and reactivity time, one or two molecules of glutaraldehyde per primary amino group were anchored on agarose supports. The structure differences of activated supports were evaluated. Moreover, the 3D surface structure of B domain was modeled to explore the distribution of reactive and adsorptive groups. Compared with the monomeric glutaraldehyde agarose (Aga@MG), the dimeric glutaraldehyde agarose (Aga@DG) seems to be involved with more amino acid groups of rSpA during the immobilization. The leaked rSpA of 0.24â¯ng/mg IgG from Aga@DG@rSpA was slightly lower than that of 0.36â¯ng/mg IgG from Aga@MG@rSpA. However, Aga@MG is more suitable for oriented immobilization of rSpA which endows the prepared adsorbents to higher IgG-binding capacity. When rSpA was immobilized on Aga@MG at the low and high ionic strength, the maximum capacities from Langmuir model were 56.2 and 59.2â¯mg/g, respectively. The Aga@MG provided shorter spacer arm compared with the Aga@DG, which contributed to the oriented immobilization of rSpA.
Subject(s)
Glutaral/chemistry , Immobilized Proteins/chemistry , Sepharose/chemistry , Staphylococcal Protein A/chemistry , Humans , Recombinant Proteins , StaphylococcusABSTRACT
BACKGROUND: Phytase supplied in feeds for monogastric animals is important for improving nutrient uptake and reducing phosphorous pollution. High-thermostability phytases are particularly desirable due to their ability to withstand transient high temperatures during feed pelleting procedures. A comparison of crystal structures of the widely used industrial Aspergillus niger PhyA phytase (AnP) with its close homolog, the thermostable Aspergillus fumigatus phytase (AfP), suggests 18 residues in three segments associated with thermostability. In this work, we aim to improve the thermostability of AnP through site-directed mutagenesis. We identified favorable mutations based on structural comparison of homologous phytases and molecular dynamics simulations. RESULTS: A recombinant phytase (AnP-M1) was created by substituting 18 residues in AnP with their AfP analogs. AnP-M1 exhibited greater thermostability than AnP at 70 °C. Molecular dynamics simulations suggested newly formed hydrogen bonding interactions with nine substituted residues give rise to the improved themostability. Thus, another recombinant phytase (AnP-M2) with just these nine point substitutions was created. AnP-M2 demonstrated superior thermostability among all AnPs at ≥70 °C: AnP-M2 maintained 56% of the maximal activity after incubation at 80 °C for 1 h; AnP-M2 retained 30-percentage points greater residual activity than that of AnP and AnP-M1 after 1 h incubation at 90 °C. CONCLUSIONS: The resulting AnP-M2 is an attractive candidate in industrial applications, and the nine substitutions in AnP-M2 are advantageous for phytase thermostability. This work demonstrates that a strategy combining structural comparison of homologous enzymes and computational simulation to focus on important interactions is an effective method for obtaining a thermostable enzyme.
Subject(s)
6-Phytase/chemistry , Aspergillus fumigatus/enzymology , Aspergillus niger/enzymology , 6-Phytase/biosynthesis , 6-Phytase/genetics , Amino Acid Substitution/genetics , Computer Simulation , Enzyme Stability , Fungal Proteins/metabolism , Hydrogen-Ion Concentration , Molecular Dynamics Simulation , Mutagenesis, Site-Directed/methods , TemperatureABSTRACT
The esterase Est8 from the thermophilic bacterium Bacillus sp. K91 belongs to the GDSL family and is active on a variety of acetylated compounds, including 7-aminocephalosporanic acid. In contrast to other esterases of the GDSL family, the catalytic residues Asp182 and His185 were more pivotal for the catalytic activity of Est8 than the Ser11 residue. To better understand the biochemical and enzymatic properties of Est8, recombinant Est8 protein was purified and crystallized. Crystals of Est8 were obtained by the hanging-drop vapour-diffusion method using 2.0â M ammonium sulfate, 5%(v/v) 2-propanol as the crystallization solution. X-ray diffraction data were collected to a resolution of 2.30â Å with an Rmerge of 16.4% from a crystal belonging to space group P41212 or P43212, with unit-cell parameters a = b = 68.50, c = 79.57â Å.
Subject(s)
Bacillus/enzymology , Bacillus/genetics , Carboxylesterase/chemistry , Carboxylesterase/genetics , Amino Acid Motifs , Amino Acid Sequence , Crystallization/methods , Crystallography, X-Ray/methods , Protein StabilityABSTRACT
Catechol 1,2-dioxygenase is the key enzyme that catalyzes the cleavage of the aromatic ring of catechol. We explored the genetic diversity of catechol 1,2-dioxygenase in the fecal microbial metagenome by PCR with degenerate primers. A total of 35 gene fragments of C12O were retrieved from microbial DNA in the feces of pygmy loris. Based on phylogenetic analysis, most sequences were closely related to C12O sequences from Acinetobacter. A full-length C12O gene was directly cloned, heterologously expressed in Escherichia coli, and biochemically characterized. Purified catPL12 had optimum pH and temperature pH 8.0 and 25 °C and retained 31 and 50% of its maximum activity when assayed at 0 and 35 °C, respectively. The enzyme was stable at 25 and 37 °C, retaining 100% activity after pre-incubation for 1 h. The kinetic parameters of catPL12 were determined. The enzyme had apparent Km of 67 µM, Vmax of 7.3 U/mg, and kcat of 4.2 s-1 for catechol, and the cleavage activities for 3-methylcatechol, 4-methylcatechol, and 4-chlorocatechol were much less than for catechol, and no activity with hydroquinone or protocatechuate was detected. This study is the first to report the molecular and biochemical characterizations of a cold-adapted catechol 1,2-dioxygenase from a fecal microbial metagenome.
Subject(s)
Catechol 1,2-Dioxygenase/genetics , Catechol 1,2-Dioxygenase/metabolism , Feces/microbiology , Genetic Variation , Metagenome , Acinetobacter/enzymology , Acinetobacter/genetics , Animals , Catechol 1,2-Dioxygenase/classification , Catechols/metabolism , Cloning, Molecular , DNA Primers , Escherichia coli/enzymology , Escherichia coli/genetics , Kinetics , Lorisidae/microbiology , Phylogeny , Polymerase Chain Reaction/methodsABSTRACT
BACKGROUND: Xylanases have been widely employed in many industrial processes, and thermophilic xylanases are in great demand for meeting the high-temperature requirements of biotechnological treatments. In this work, we aim to improve the thermostability of XynCDBFV, a glycoside hydrolase (GH) family 11 xylanase from the ruminal fungus Neocallimastix patriciarum, by site-directed mutagenesis. We report favorable mutations at the C-terminus from B-factor comparison and multiple sequence alignment. RESULTS: C-terminal residues 207-NGGA-210 in XynCDBFV were discovered to exhibit pronounced flexibility based on comparison of normalized B-factors. Multiple sequence alignment revealed that beneficial residues 207-SSGS-210 are highly conserved in GH11 xylanases. Thus, a recombinant xylanase, Xyn-MUT, was constructed by substituting three residues (N207S, G208S, A210S) at the C-terminus of XynCDBFV. Xyn-MUT exhibited higher thermostability than XynCDBFV at ≥70 °C. Xyn-MUT showed promising improvement in residual activity with a thermal retention of 14% compared to that of XynCDBFV after 1 h incubation at 80 °C; Xyn-MUT maintained around 50% of the maximal activity after incubation at 95 °C for 1 h. Kinetic measurements showed that the recombinant Xyn-MUT had greater kinetic efficiency than XynCDBFV (Km, 0.22 and 0.59 µM, respectively). Catalytic efficiency values (kcat/Km) of Xyn-MUT also increased (1.64-fold) compared to that of XynCDBFV. Molecular dynamics simulations were performed to explore the improved catalytic efficiency and thermostability: (1) the substrate-binding cleft of Xyn-MUT prefers to open to a larger extent to allow substrate access to the active site residues, and (2) hydrogen bond pairs S208-N205 and S210-A55 in Xyn-MUT contribute significantly to the improved thermostability. In addition, three xylanases with single point mutations were tested, and temperature assays verified that the substituted residues S208 and S210 give rise to the improved thermostability. CONCLUSIONS: This is the first report for GH11 recombinant with improved thermostability based on C-terminus replacement. The resulting Xyn-MUT will be an attractive candidate for industrial applications.