ABSTRACT
The primary challenge facing silicon-based electronics, crucial for modern technological progress, is difficulty in dimensional scaling. This stems from a severe deterioration of transistor performance due to carrier scattering when silicon thickness is reduced below a few nanometres. Atomically thin two-dimensional (2D) semiconductors still maintain their electrical characteristics even at sub-nanometre scales and offer the potential for monolithic three-dimensional (3D) integration. Here we explore a strategic shift aimed at addressing the scaling bottleneck of silicon by adopting 2D semiconductors as new channel materials. Examining both academic and industrial viewpoints, we delve into the latest trends in channel materials, the integration of metal contacts and gate dielectrics, and offer insights into the emerging landscape of industrializing 2D semiconductor-based transistors for monolithic 3D integration.
ABSTRACT
The concept of remote epitaxy involves a two-dimensional van der Waals layer covering the substrate surface, which still enable adatoms to follow the atomic motif of the underlying substrate. The mode of growth must be carefully defined as defects, e.g., pinholes, in two-dimensional materials can allow direct epitaxy from the substrate, which, in combination with lateral epitaxial overgrowth, could also form an epilayer. Here, we show several unique cases that can only be observed for remote epitaxy, distinguishable from other two-dimensional material-based epitaxy mechanisms. We first grow BaTiO3 on patterned graphene to establish a condition for minimizing epitaxial lateral overgrowth. By observing entire nanometer-scale nuclei grown aligned to the substrate on pinhole-free graphene confirmed by high-resolution scanning transmission electron microscopy, we visually confirm that remote epitaxy is operative at the atomic scale. Macroscopically, we also show variations in the density of GaN microcrystal arrays that depend on the ionicity of substrates and the number of graphene layers.
ABSTRACT
Layer transfer techniques have been extensively explored for semiconductor device fabrication as a path to reduce costs and to form heterogeneously integrated devices. These techniques entail isolating epitaxial layers from an expensive donor wafer to form freestanding membranes. However, current layer transfer processes are still low-throughput and too expensive to be commercially suitable. Here we report a high-throughput layer transfer technique that can produce multiple compound semiconductor membranes from a single wafer. We directly grow two-dimensional (2D) materials on III-N and III-V substrates using epitaxy tools, which enables a scheme comprised of multiple alternating layers of 2D materials and epilayers that can be formed by a single growth run. Each epilayer in the multistack structure is then harvested by layer-by-layer mechanical exfoliation, producing multiple freestanding membranes from a single wafer without involving time-consuming processes such as sacrificial layer etching or wafer polishing. Moreover, atomic-precision exfoliation at the 2D interface allows for the recycling of the wafers for subsequent membrane production, with the potential for greatly reducing the manufacturing cost.
ABSTRACT
Heterogeneous integration of single-crystal materials offers great opportunities for advanced device platforms and functional systems1. Although substantial efforts have been made to co-integrate active device layers by heteroepitaxy, the mismatch in lattice polarity and lattice constants has been limiting the quality of the grown materials2. Layer transfer methods as an alternative approach, on the other hand, suffer from the limited availability of transferrable materials and transfer-process-related obstacles3. Here, we introduce graphene nanopatterns as an advanced heterointegration platform that allows the creation of a broad spectrum of freestanding single-crystalline membranes with substantially reduced defects, ranging from non-polar materials to polar materials and from low-bandgap to high-bandgap semiconductors. Additionally, we unveil unique mechanisms to substantially reduce crystallographic defects such as misfit dislocations, threading dislocations and antiphase boundaries in lattice- and polarity-mismatched heteroepitaxial systems, owing to the flexibility and chemical inertness of graphene nanopatterns. More importantly, we develop a comprehensive mechanics theory to precisely guide cracks through the graphene layer, and demonstrate the successful exfoliation of any epitaxial overlayers grown on the graphene nanopatterns. Thus, this approach has the potential to revolutionize the heterogeneous integration of dissimilar materials by widening the choice of materials and offering flexibility in designing heterointegrated systems.
ABSTRACT
Graphene aerogel (GA) has shown great promise as reinforcement of polymeric composites with exceptional electrical and mechanical characteristics. Although there has been significant progress in controlling the structure of GAs, no studies have appeared on the enhanced properties of GAs by employing high-quality precursor graphene flakes (GFs). However, the assembly of high-quality GFs is particularly challenging due to their highly hydrophobic and agglomerative nature in aqueous media, and of the few methods available to synthesize high-quality GFs, most produce flakes with very small lateral sizes. Herein, we report the fabrication of highly crystalline GAs using large nonoxidized graphene flakes (NOGFs) prepared by a novel graphite intercalation compound-based method. Bidirectional freeze casting is utilized for aligning NOGFs in two orthogonal directions, vertically and laterally, where the NOGF walls individually function as effective conductive pathways. The as-prepared nonoxidized graphene aerogel (NOGA) exhibits a defect concentration as low as 1.4% of impurity oxygen with an excellent electrical conductivity of 202.9 S/m at a low density of 5.7 mg/cm3. The corresponding NOGA-epoxy composite shows a remarkable electrical conductivity of 122.6 S/m and a fracture toughness of 1.74 MPa·m1/2 at a low filler content of 0.45 vol %.
ABSTRACT
Hexagonal boron nitride (h-BN) has tremendous potential for dielectric energy storage by rationally assembling with graphene. We report the fabrication of microlaminate composites consisting of alternating reduced graphene oxide (rGO) and h-BN nanosheets embedded in a polyurethane (PU) matrix using a novel, two-step bidirectional freeze casting process. Porous, highly-aligned rGO-PU aerogels having ultrahigh dielectric constants with relatively high dielectric losses and low dielectric strengths are fabricated by initial freeze casting. The losses are suppressed, whereas the dielectric strengths are restored by assembling the porous rGO-PU skeleton with electrically insulating BN-PU tunneling barrier layers in the second freeze casting routine. The ligaments bridging the conductive rGO-PU layers are effectively removed by the BN-PU barrier layers, eliminating the current leakage in the transverse direction. The resultant rGO-PU/BN-PU microlaminate composites deliver a remarkable dielectric constant of 1084 with a low dielectric loss of 0.091 at 1 kHz. By virtue of synergy arising from both the rGO-PU layers with a high dielectric constant and the BN-PU barrier layers with a high dielectric strength, the microlaminate composites present a maximum energy density of 22.7 J/cm3, 44 folds of the neat rGO-PU composite acting alone. The promising overall dielectric performance based on a microlaminate structure offers a new insight into the development of next-generation dielectric materials.
ABSTRACT
Unidirectional graphene aerogels (UGAs) with tunable densities, degrees of alignment, and electrical conductivities are prepared by varying the average size of precursor graphene oxide (GO) sheets between 1.1 and 1596 µm2. UGAs prepared using ultralarge GO (UL-UGA) outperform those made from small GO in these properties. The UL-UGA/epoxy composites prepared by infiltrating liquid epoxy resin into the porous UGA structure exhibit an excellent electrical conductivity of 0.135 S/cm, along with an ultralow percolation threshold of 0.0066 vol %, which is one of the lowest values ever reported for all graphene-based composites. Owing to their three-dimensional interconnected network, a high degree of alignment, and effective reduction, UL-UGAs effectively enhance the fracture toughness of epoxy by 69% at 0.11 vol % graphene content through unique toughening mechanisms, such as crack pinning, crack deflection, interfacial debonding, and graphene rupture. These aerogels and composites can be mass-produced thanks to the facile, scalable, and cost-efficient fabrication process, which will find various multifunctional applications.