Investigation on 3D printing of shrimp surimi under different printing parameters and thermal processing conditions.

Improving the printing accuracy and stability of shrimp surimi and finding appropriate printing parameters and suitable thermal processing method can help to develop high value-added 3D printing products of shrimp surimi. It was found that in order to make the 3D printing products of shrimp surimi have higher printing adaptability (printing accuracy and printing stability reach more than 97%), by choosing nozzle diameter of 1.20 mm and setting the printing height of the nozzle to 2.00 mm, the layers of the printed products were better fused with each other, and the printing accuracy of the products could be greatly improved; there was no uneven discharge and filament breakage when the nozzle moved at the speed of 30 mm/s; and the products were internally compact and had good stability when the printing filling rate was 80%. In addition, the deformation rates of steamed, boiled and deep-fried shrimp surimi products were significantly higher than those of oven-baked and microwaved shrimp surimi products (P < 0.05). Microwave heating had a greater effect on the deformation and color of shrimp surimi products, and was not favored by the evaluators. In terms of deformation rate, sensory score, and textural characteristic, the oven-baked thermal processing method was selected to obtain higher sensory evaluation scores and lower deformation rates of shrimp surimi 3D printed products. In the future, DIY design can be carried out in 3D printing products of shrimp surimi to meet the needs of different groups of people for modern food.

Investigation on 3D Printing of Shrimp Surimi Adding Three Edible Oils.

Three-dimensional (3D) printing provides a new method for innovative processing of shrimp surimi. However, there still exists a problem of uneven discharge during the 3D printing of surimi. The effects of different amounts of lard oil (LO), soybean oil (SO), and olive oil (OO) (0%, 2%, 4%, and 6%, respectively) added to shrimp surimi on the 3D printability of surimi were evaluated. The findings showed that with the increase in the added oil, the rheological properties, texture properties, water-holding capacity (WHC), and water distribution of surimi with the same kind of oil were significantly improved; the printing accuracy first increased and then decreased; and the printing stability showed an increasing trend (p < 0.05). The surimi with 4% oil had the highest printing adaptability (accuracy and stability). Different kinds of oil have different degrees of impact on the physical properties of surimi, thereby improving 3D-printing adaptability. Among all kinds of oil, LO had the best printing adaptability. In addition, according to various indicators and principal component analysis, adding 4% LO to shrimp surimi gave the best 3D-printing adaptability. But from the aspects of 3D printing properties and nutrition, adding 4% SO was more in line with the nutritional needs of contemporary people.

Insight into the allergenicity and structure changes of parvalbumin from Trachinotus ovatus induced by dense-phase carbon dioxide.

Parvalbumin (PV) is a major allergen in fish, and traditional treatments cannot reduce its sensitization. The effects of dense-phase carbon dioxide (DPCD) treatment on the sensitization and spatial structure of PV in Trachinotus ovatus were evaluated in this study. Western blotting and indirect ELISA were used to determine the allergenicity changes and spatial conformations of PV treated by DPCD. Tris-tricine-SDS-PAGE, circular dichroism, surface hydrophobicity, endogenous fluorescence, UV spectrophotometry, free amino group, total sulfhydryl group and SEM analyses were applied to characterize PV structure. The results showed that DPCD treatment (15 MPa, 30 min, 50 °C) could reduce PV-induced allergic reactions by 39-41 %, which destroyed the normal conformational epitopes and reduced the risk of PV-induced allergy. The secondary structure changed from ordered to disordered with a decreased content of α-helical groups, while the internal hydrophobic groups were exposed. The total sulfhydryl group content decreased significantly (P < 0.05). The surface hydrophobicity and ultraviolet absorption spectrum were enhanced, and the endogenous fluorescence peak shifted to a long wavelength. Meanwhile, the content of free amino groups increased significantly (P < 0.05). This study could provide a theoretical basis and a promising technical approach for reduction of PV allergenicities.

Effect of MDA-mediated oxidation on the protein structure and digestive properties of golden pomfret.

In this study, golden pomfret myofibrillar protein (MP) was used as the research object, and the oxidation system of malondialdehyde (MDA) as an inducer and the static digestion model in vitro was established for the analysis of the changes in protein structure and molecular morphology during oxidation and digestion. Subsequently, the effects of MDA-mediated oxidation on the structure and digestive properties of golden pomfret myofibrillar fibrillar protein were determined. The results showed that the hydrolysis degree and digestion rate of MP were inhibited with the increase in MDA concentration (0, 0.5, 1, 2, 5, 10 mmol/L), and the carbonyl group, surface hydrophobicity, irregular curling, and MDA content increased significantly (P < 0.05), whereas the total sulfhydryl groups, α-helices, free amino groups, hydrolysis degree, and MDA incorporation decreased significantly (P < 0.05), The molecular particle size was significantly reduced (P < 0.05), and the molecular morphology and molecular structure were analyzed (P >0.05). Finally, the molecular size and cross-linking degree gradually increased. In conclusion, MDA can alter the structure and morphology of proteins, resulting in a decrease in hydrolysis and digestion rate. This study can provide theoretical support and reference for the regulation of protein digestion.

Oxidized myoglobin: Revealing new perspectives and insights on factors affecting the water retention of myofibrillar proteins.

The impact of oxidized myoglobin (Mb) on myofibrillar protein (MP) oxidation and water retention was investigated. Results showed that the oxidation of Mb increased with increasing concentration of oxidized linoleic acid (OLA). In the presence of 100 mmol/L OLA, hemin iron decreased by 62.07 % compared to the control group. Further investigation showed that mild oxidation of Mb (≤10 mmol/L OLA) increased the water retention and the absolute value of the zeta potential of MP, whereas excessive oxidation (>10 mmol/L OLA) decreased these properties. With the increase of Mb oxidation, the carbonyl content in MP increased, and α-helices changed to random helix. And the tertiary structure changed. Pearson correlation analysis suggested that oxidized Mb affected the water retention of MP, which was closely related to hemin iron and non-hemin iron. In conclusion, OLA induced Mb oxidation, further promoted MP oxidation and affected its water retention.

Effect of Liquid Nitrogen Freezing Temperature on the Muscle Quality of Litopenaeus vannamei.

The implications of different liquid nitrogen freezing (LNF) temperatures (-35 °C, -65 °C, -95 °C, and -125 °C) on the ice crystal and muscle quality of white shrimp (Litopenaeus vannamei) were investigated in this essay. The results showed that better muscle quality was maintained after LNF treatment compared to that after air blast freezing (AF) treatment. As the freezing temperature of liquid nitrogen decrease, the freezing speed accelerated, with the freezing speed of LNF at -125 °C being the fastest. However, an excessively fast freezing speed was not conducive to maintaining the quality of shrimp. Among all the freezing treatments, LNF at -95 °C led to the lowest thawing losses and cooking losses, and the highest L* values, indicating that LNF at -95 °C could keep the water holding capacity of frozen shrimp better than that with other freezing methods. At the same time, LNF at -95 °C resulted in higher water holding capacity, and hardness values for shrimps than those with other frozen treatments (p < 0.05). In addition, the results of the water distribution of shrimps showed that treatment with a -95 °C LNF reduced the migration rate of bound and free water. Meanwhile, the microstructural pores of shrimps in the -95 °C LNF group were smaller, indicating that the ice crystals generated during -95 °C LNF were relatively smaller than those generated via other frozen treatments. In conclusion, an appropriate LNF temperature (-95 °C) was beneficial for improving the quality of frozen shrimp, and avoiding freezing breakage.

Quantitative analysis of the correlation between gel strength and microstructure of shrimp surimi gel induced by dense phase carbon dioxide.

The impact of treatment pressure, temperature and time of DPCD on the Pacific White Shrimp (Litopenaeus vannamei) surimi gel properties was studied and compared with the conventional heat treatment. The gel strength, crosslinking degree, and microstructure of shrimp surimi gels were investigated. Quantitative microstructural characteristics were investigated to elucidate the changes in microstructure during the formation of gel induced by DPCD. With increased DPCD treatment setting conditions, the gel strength and crosslinking degree of shrimp surimi gel significantly improved (P < 0.05) with similar variation trends. Quantitative microstructural analysis revealed that the fractal dimension (Df) and the pore equivalent diameter of gel microstructure increased with the increase of DPCD treatment conditions. The lacunarity decreased and then increased, whereas pore number increased and decreased. According to the microstructural characteristics results, the surimi gel with 51.48 % degree of crosslinking induced at 25 MPa, 50˚C, and 60 min showed the most complex and homogeneous microstructure with the highest (Df), smaller lacunarity, an average pore equivalent diameter, and a larger pore number. The correlation analysis demonstrated that the crosslinking degree was strongly positively correlated with the gel strength. The Df, pore equivalent diameter and number of pores significantly positively correlated with the crosslinking degree, whereas the lacunarity strongly negatively correlated with the crosslinking degree. The present study showed that the DPCD treatment with a crosslinking degree of 51.48 % is the most optimum condition for better gel formation. The study could provide a theoretical basis for processing shrimp surimi with improved gel properties.

A review of oil and water retention in emulsified meat products: The mechanisms of gelation and emulsification, the application of multi-layer hydrogels.

Emulsified meat products are key deep-processing products due to unique flavor and high nutritional value. Myosin dissolves, and protein aggregation and heat-induced gelation occur after myosin unfolds and hydrophobic groups are exposed. Myosin could form interfacial protein membranes and wrap fat globules. Emulsified fat globules may be filled in heat-induced gel networks. Therefore, this review intends to discuss the influences of heat-induced gelation and interfacial adsorption behavior on oil and water retention. Firstly, the mechanism of heat-induced gelation was clarified from the perspective of protein conformation and micro-structure. Secondly, the mechanism of emulsification stability and its factors affecting interfacial adsorption were demonstrated as well as limitations and challenges. Finally, the structure characteristics and application of multi-layer hydrogels in the gelation and emulsification were clarified. It could conclude that the characteristic morphology, spatial conformation and structure adjustment affected heat-induced gelation and interfacial adsorption behavior. Spatial conformation and microstructure were adjusted to improve the oil and water retention by pH, ionic strength, amino acid, oil phase characteristic and protein interaction. Multi-layer hydrogels facilitated oil and water retention. The comprehensive review of gelation and emulsification mechanisms could promote the development of meat products and improvement of meat processing technology.

Correlation between Water Characteristics and Gel Strength in the Gel Formation of Golden Pompano Surimi Induced by Dense Phase Carbon Dioxide.

The relationship between the gel quality of golden pompano surimi treated with dense phase carbon dioxide (DPCD) and changes in water characteristics was evaluated. Low-field nuclear magnetic resonance (LF-NMR) and nuclear magnetic resonance imaging were used to monitor changes in the water status of surimi gel under different treatment conditions. Whiteness, water-holding capacity and gel strength were used as the quality indicators of the surimi gel. The results showed that DPCD treatment could significantly increase the whiteness of surimi and the strength of the gel, while the water-holding capacity decreased significantly. LF-NMR analysis showed that, as the DPCD treatment intensity increased, the relaxation component T22 shifted to the right, T23 shifted to the left, the proportion of A22 decreased significantly (p < 0.05) and the proportion of A23 increased significantly (p < 0.05). A correlation analysis of water characteristics and gel strength showed that the water-holding capacity of surimi induced by DPCD was strongly positively correlated with gel strength, while A22 and T23 were strongly negatively correlated with gel strength. This study provides helpful insights into the quality control of DPCD in surimi processing and also provides an approach for the quality evaluation and detection of surimi products.

Physicochemical parameters and nutritional profile of back and abdomen muscle of fresh golden pompano (Trachinotus ovatus) and hybrid grouper (Epinephelus lanceolatus × Epinephelus fuscoguttatus).

Golden pompano (Trachinotus ovatus) and hybrid grouper (Epinephelus lanceolatus × Epinephelus fuscoguttatus) has widely been distributed in China and Southeast Asian countries with great commercial importance. In this study, the nutritional profiles, chemical and physical parameters of back and abdomen muscles were determined. Significantly different (p < .05) proximate compositions were found in two fish muscles. The contents of water-soluble protein, salt-soluble protein, and non-nitrogenous protein were higher in the golden pompano while salt-insoluble proteins were higher in the hybrid grouper. The main minerals found were K (3700.56-4495.57 µg/g) followed by P > Na > Mg > and Ca, respectively. Fatty acids contents consisted of polyunsaturated fatty acids ranging from 29.40% to 43.09% and saturated fatty acids 28.33% to 39.61%. The muscles were rich in n-3 PUFAs with n-6/n-3 ratio of 1.36%-2.96% in the back and abdomen. On the other hand, total amino acid and non-essential amino acid contents were found higher in the hybrid grouper while essential amino acid and delicious amino acid contents were higher in the golden pompano. Glutamic acid was the most predominant amino acid. The amino acid scores (AAS) of six amino acids were close to 1.00, whereas lysine showed the highest AAS while tryptophan was the most limited essential amino acid in all muscles, respectively. These results indicated golden pompano and hybrid grouper exhibited a varied nutritional composition and offered a good nutritional profile.

Gelation Process Optimization of Shrimp Surimi Induced by Dense Phase Carbon Dioxide and Quality Evaluation of Gel.

Dense phase carbon dioxide (DPCD) is a new non-thermal method to induce surimi gel. However, the gel quality is affected by many factors, such as DPCD treatment time, temperature, and pressure, which makes it complicated to determine its operating parameters. Box-Behnken and backward linear regression were used to optimize the conditions (temperature, pressure, and treatment time) of DPCD-induced shrimp surimi gel formation, and a model between shrimp surimi gel strength and treatment conditions was developed and validated in the present study. Meanwhile, the heat-induced method was used as a control to analyze the effect of DPCD on the quality of shrimp surimi gel in the present study. The results showed that DPCD treatment affected the strength of shrimp surimi gel significantly, and the pressure of DPCD had the greatest influence on the gel strength of shrimp surimi, followed by time and temperature. When the processing pressure was 30 MPa, the temperature was 55 °C, and the treatment time was 60 min, the gel strength of the shrimp surimi was as high as 197.35 N·mm, which was not significantly different from the simulated value of 198.28 N mm (p > 0.05). The results of the gel quality properties showed that, compared with the heat-induced method, DPCD reduced the nutrient and quality loss of the shrimp surimi gel, and increased the gel strength and gel water-holding capacity. The results of low-field nuclear magnet resonance showed that DPCD increased the binding capacity of shrimp surimi to bound water and immobilized water, and reduced their losses. Gel microstructure further demonstrated that DPCD could improve shrimp surimi gelation properties, characterized by a finer and uniformly dense gel network structure. In summary, DPCD is a potential method for inducing shrimp surimi to form a suitable gel. The prediction model established in this study between DPCD treatment temperature, pressure, time, and gel strength can provide a reference for the production of shrimp surimi by DPCD.

Comparative Lipidomics Profiling of Acylglycerol from Tuna Oil Selectively Hydrolyzed by Thermomyces Lanuginosus Lipase and Candida Antarctica Lipase A.

Lipase hydrolysis is an effective method to develop different functional types of lipids. In this study, tuna oil was partially hydrolyzed at 30% and 60% by Thermomyces lanuginosus lipase (TL 100 L) and Candida Antarctica lipase A (ADL), respectively, to obtain lipid-modified acylglycerols. The lipidomic profiling of the acylglycerols was investigated by UPLC-Q-TOF-MS and GC-MS to clarify the lipid modification effect of these two lipases on tuna oil. The results showed that 247 kinds of acylglycerols and 23 kinds of fatty acids were identified in the five samples. In the ADL group, the content of triacylglycerols (TAG) and diacylglycerols (DAG) increased by 4.93% and 114.38%, respectively, with an increase in the hydrolysis degree (HD), while there was a decreasing trend in the TL 100 L group. TL 100 L had a better enrichment effect on DHA, while ADL was more inclined to enrich EPA and hydrolyze saturated fatty acids. Cluster analysis showed that the lipids obtained by the hydrolysis of TL 100 L and ADL were significantly different in the cluster analysis of TAG, DAG, and monoacylglycerols (MAG). TL 100 L has strong TAG selectivity and a strong ability to hydrolyze acylglycerols, while ADL has the potential to synthesize functional lipids containing omega-3 PUFAs, especially DAG.

Research Progress on Nutritional Value, Preservation and Processing of Fish-A Review.

The global population has rapidly expanded in the last few decades and is continuing to increase at a rapid pace. To meet this growing food demand fish is considered a balanced food source due to their high nutritious value and low cost. Fish are rich in well-balanced nutrients, a good source of polyunsaturated fatty acids and impose various health benefits. Furthermore, the most commonly used preservation technologies including cooling, freezing, super-chilling and chemical preservatives are discussed, which could prolong the shelf life. Non-thermal technologies such as pulsed electric field (PEF), fluorescence spectroscopy, hyperspectral imaging technique (HSI) and high-pressure processing (HPP) are used over thermal techniques in marine food industries for processing of most economical fish products in such a way as to meet consumer demands with minimal quality damage. Many by-products are produced as a result of processing techniques, which have caused serious environmental pollution. Therefore, highly advanced technologies to utilize these by-products for high-value-added product preparation for various applications are required. This review provides updated information on the nutritional value of fish, focusing on their preservation technologies to inhibit spoilage, improve shelf life, retard microbial and oxidative degradation while extending the new applications of non-thermal technologies, as well as reconsidering the values of by-products to obtain bioactive compounds that can be used as functional ingredients in pharmaceutical, cosmetics and food processing industries.

Effect of secondary heat-induced aggregation on pork meat batter protein conformation, hydration characteristics, textural quality and in vitro digestibility.

Secondary heating (SH, 30 min at 100 °C), which has a great influence on elastic gels, has been widely applied to emulsified meat products to extend their shelf life. The effects of SH on the textural and nutritional qualities, water migration of meat batter and on the conformations, aggregation and in vitro digestibility of the meat proteins were investigated. Various heat treatments were tested, and the results revealed that an initial heating at 75 °C yielded the highest low-field NMR relaxation time T22 and peak area P22 and the highest in vitro digestibility. As this initial heating time was increased, the α-helix content, water-holding capacity (WHC) and protein digestibility all decreased. Furthermore, SH yielded a much more obvious decrease in the pepsin activity on the protein digestibility than just the initial heating, and also yielded increases in ß-sheet content, hardness, gumminess, and chewiness. This result implied that gel shrinkage and protein aggregation occurred, causing decreased WHC and protein digestibility. Also, SH resulted in significantly decreased (P < 0.05) intensities of myosin light chain gel electrophoresis bands. Therefore, SH was concluded to have reduced the textural quality and nutritional value of the meat.

The study of protein conformation and hydration characteristics of meat batters at various phase transition temperatures combined with Low-field nuclear magnetic resonance and Fourier transform infrared spectroscopy.

To get a thorough understanding of evolution of heat-induced gel in meat batters, water distribution, protein conformation and their chemical bonds at phase transition temperatures (20-74 °C) were investigated by Low-field NMR and FT-IR. Firstly, G' increased and tanδ decreased beyond 55 °C, when sol was completely changed into an elastic gel. Then water holding capacity (WHC) decreased along with decreasing relaxation time T22 and a new relaxation time T23 appeared at 50 °C, which indicated that partially immobilised water was converted into free water outside. Meanwhile, surface hydrophobicity increased significantly and free sulfhydryl contents decreased, which contributed to the formation of disulfide bonds, especially beyond 55 °C. Finally, the transformation of α-helix into ß-sheets occurred, and increasing ß-sheets are necessary for the formation of elastic gels. Moreover, there was a significant correlation between α-helical contents and water loss, surface hydrophobicity, sulfhydryl contents.