ABSTRACT
The present work aims to explore the new solid forms of telmisartan (TEL) with alpha-ketoglutaric acid (KGA) and glutamic acid (GA) as potential coformers using mechanochemical approach and their role in augmentation in physicochemical parameters over pure crystalline TEL. Mechanochemical synthesis was performed using 1:1 stoichiometric ratio of TEL and the selected coformers in the presence of catalytic amount of ethanol for 1 h. The ground product was characterized by PXRD, DSC, and FTIR. The new solid forms were evaluated for apparent solubility, intrinsic dissolution, and physical stability. Preliminary characterization revealed the amorphization of the mechanochemical product as an alternate outcome of cocrystallization screening. Mechanistic understanding of the amorphous phase highlights the formation of amorphous-mediated cocrystallization that involves three steps, viz., molecular recognition, intermediate amorphous phase, and product nucleation. The solubility curves of both multicomponent amorphous solid forms (TEL-KGA and TEL-GA) showed the spring-parachute effect and revealed significant augmentation in apparent solubility (8-10-folds), and intrinsic dissolution release (6-9-folds) as compared to the pure drug. Besides, surface anisotropy and differential elemental distributions in intrinsic dissolution compacts of both solid forms were confirmed by FESEM and EDX mapping. Therefore, amorphous phases prepared from mechanochemical synthesis can serve as a potential solid form for the investigation of a cocrystal through amorphous-mediated cocrystallization. This has greater implications in solubility kinetics wherein the rapid precipitation of the amorphous phase can be prevented by the metastable cocrystal phase and contribute to the significant augmentation in the physicochemical parameters.
Subject(s)
Telmisartan , Crystallization , Solubility , Drug StabilityABSTRACT
During persistent hyperglycaemia, albumin, one of the major blood proteins, can undergo fast glycation. It can be expected that timely inhibition of protein glycation might be add quality years to diabetic patients' life. Therefore, this study was designed to analyse the role of silibinin to reduced or delay amadori adduct formation at early glycation and its beneficial effect to improve the glycated albumin structure and conformation. We also analysed cytotoxic effect of amadori-albumin in the presence of silibinin on murine macrophage cell line RAW cells by MTT (3-(4, 5-dimethylthiazolyl-2)-2, 5-diphenyltetrazolium bromide) assay. Formation of early glycated product (furosine) in all samples was confirmed by LCMS. Albumin incubated with glucose only showed presence of furosine like structure. Albumin treated with silibinin in the presence of glucose did not show such furosine like peak. This LCMS result showed the silibinin play a protective role in the formation of early glycated product. HMF contents were also reduced in the presence of silibinin, when albumin was incubated with increasing concentrations of silibinin (100 and 200 µM) in the presence of glucose. ANS binding fluorescence decrease by increasing silibinin concentrations with amadori-albumin. SDS-PAGE was also showed that no significant difference in the band mobility of albumin treated with silibinin as compared to native albumin. The secondary conformational alteration in amadori-albumin due to silibinin were conï¬rmed by FTIR. This spectrum showed slight shift in amide I and Amide II band in albumin co-incubated with glucose and silibinin as compared to albumin incubated with glucose only. We further discussed about cytotoxic effect of amadori albumin and its prevention by silibinin. MTT assay results demonstrated that amadori-albumin showed cytotoxic effect on RAW cells but silibinin showed protective role and increased the cell viability. Moreover, the results showed that silibinin has anti-glycating potential and playing a role to prevent the formation of Amadori-albumin in-vitro. Silibinin possesses strong anti-glycating capacity and can improve albumin structure and function at early stage. It might be useful in delaying the progression of diabetes mellitus and its secondary complications at early stage.
Subject(s)
Antineoplastic Agents , Diabetes Mellitus , Animals , Mice , Amides , Glucose , Glycosylation , Maillard Reaction , Serum Albumin/chemistry , Serum Albumin/metabolism , Silybin/pharmacology , RAW 264.7 CellsABSTRACT
There is a pressing need for the development of greener liquid chromatographic bioanalytical methods for antidiabetic drugs for plasma monitoring and revisiting patients' dosage regimens. Besides, analytical methods are also needed for the quality assurance of finished drug products and regulatory approval. Therefore, the present review focuses on the reported liquid chromatographic methods (LC and LC-MS/MS) that are applied for quality control, forced degradation, and pharmacokinetic studies of a newer antidiabetic agent, canagliflozin (CNG). These reported studies are summarized based on liquid chromatographic separation parameters, such as column dimensions, mobile-phase compositions, flow rate, and use of different detection systems (UV, PDA, and mass spectrometry). The sample pretreatment of biological fluids, which is important for minimizing the matrix effect, is dealt with separately. Liquid-liquid extraction was found to be the most preferred methodology adopted for sample pretreatment followed by the solid-phase extraction technique. However, miniaturized novel pretreatment methods are untraceable in the literature for the extraction of CNG. Special emphasis is paid to the assessment of the greenness profiles of the reported analytical methods for the consideration of sustainable development and green analytical chemistry. Based on the National Environmental Method Index (NEMI) assessment tool, most of the reported studies fulfilled around half of the parameters and were found to be about 50% greener. It is proposed that toxic or hazardous solvents, such as acetonitrile or methanol, should be replaced with greener and environmentally friendly solvents. Thus, there is a need to develop more robust, efficient, and greener liquid chromatographic methods for the determination of CNG in biological fluids and drug products.
Subject(s)
Canagliflozin , Tandem Mass Spectrometry , Humans , Chromatography, Liquid , Chemistry, Analytic , Hypoglycemic Agents , SolventsABSTRACT
Drug stability plays a significant role in the pharmaceutical industry from early-phase drug discovery to product registration as well as the entire life cycle of a product. Various formulation approaches have been employed to overcome drug stability issues. These approaches are sometimes time-consuming which ultimately affect the timeline of the product launch and may further require formulation optimization steps, affecting the overall cost. Pharmaceutical cocrystal is a well-established route to fine tune the biopharmaceutical properties of drugs without covalent modification. This article highlights the role of cocrystallization in mitigating the stability issues of challenging drug molecules. Representative case studies wherein the drug stability issue is addressed through pharmaceutical cocrystals have been discussed briefly and are summarized in tabular form. The emphasis has been made on the structural information of cocrystals and understanding the mechanism that improves the stability of the parent drug through cocrystallization. Besides, a guided strategy has been proposed to modulate the stability of drug molecules through cocrystallization approach. Finally, the stability concern of fixed-dose or drug combinations and the challenges associated with cocrystals are also touched.
Subject(s)
Chemistry, Pharmaceutical , Drug Discovery , Crystallization , Drug Stability , Pharmaceutical PreparationsABSTRACT
This study describes the development and characterization of curcumin with graphene oxide complex (CUR + GO) loaded into liposomes for treating skin disease. The developed complex was characterized by X-ray diffraction and showed a broad halo pattern, confirming the amorphous nature of the resulting complex. Furthermore, scanning electron microscopy revealed the irregular porous morphology of the complex-highlighting loss of the crystallinity and the emergence of the amorphous phase. Additionally, the liposomes showed long-term stability at 2-8 °C and 25 ± 2 °C/60 ± 5%RH with nonsignificant variations in the particle size, polydispersity index, and zeta potential. Overall, optical and high-resolution transmission electron microscopy images of liposomes showed a consistent shape, and no aggregation with uniform particle size distribution was observed. Furthermore, the cumulative drug release in the first 6 h was 71.24 and 64.24% for CUR-loaded liposomes and CUR-GO-loaded liposomes, respectively. The lower value of drug release might be attributed to the complex development. The drug release model found the first order with non-Fickian diffusion process, which is often observed at higher n > 0.5. The antibacterial activity of the CUR with GO-loaded liposome (D2) offered higher anti-microbial activity over other formulations against the mentioned bacterial microorganism that causes skin diseases.
ABSTRACT
In the present investigation, a nanoemulgel of minocycline was formulated and optimized for an improved drug delivery and longer retention time in the targeted area. Combining eucalyptus oil, Tween 20, and Transcutol HP, different o/w nanoemulsions were formulated by the oil phase titration method and optimized by pseudo-ternary phase diagrams. The morphology, droplet size, viscosity, and refractive index of the thermodynamically stable nanoemulsion were determined. Furthermore, optimized nanoemulsion was suspended in 1.0% w/v of Carbopol 940 gel to formulate the nanoemulgel, and for this, pH, viscosity, and spreadability were determined and texture analysis was performed. To compare the extent of drug penetration between nanoemulsion and nanoemulgel, ex vivo skin permeation studies were conducted with Franz diffusion cell using rat skin as the permeation membrane, and the nanoemulgel exhibited sustained-release behavior. It can be concluded that the suggested minocycline-containing naoemulgel is expected to treat acne rosacea more effectively.
ABSTRACT
Complexity and heterogeneous nature of most diseases have posed greater challenges in the modern healthcare system. Fixed-dose combination can offer an ideal way to improve patient compliance and higher therapeutic efficacy. However, biopharmaceutical issues associated with the drug combinations remain unaddressed. Multidrug eutectics (MDE) have demonstrated significant promise in improving the biopharmaceutical attributes with synergistic therapeutic action. Eutectic mixtures are the multicomponent solid forms that possess lesser melting point than the individual components at a fixed composition. Non-covalent linking of drug combinations as MDE is an innovative strategy with enhanced solubility, dissolution, and mechanical and potential therapeutic efficacy. This review provides a comprehensive overview of the design of MDE, rational selection of drugs, characterization tools, and their therapeutic potential. Besides, the futuristic perspective where MDE could make a significant impact on combination therapy is briefly outlined. Graphical Abstract.
Subject(s)
Drug Combinations , Drug Liberation , Drug Synergism , Humans , SolubilityABSTRACT
AIM: To develop a co-crytsal of Telmisartan for enhancing its solubility in water. BACKGROUND: Intermolecular interaction happens in crystal packing; it utilizes and helps to understand the design of new solid with their respective chemical and physical properties called crystal engineering. It is a blueprint of molecular solids with specific chemical and physical properties through an understanding and handling of intermolecular interaction for increasing the solubility, in case of poor water-soluble drugs. OBJECTIVES: The study was taken under consideration with an aim to generate and synthesize a cocrystal form of Telmisartan (TEL) with L-lysine to improve its water solubility, dissolution, and micrometric properties. METHODS: Using dry grinding technique, solvent evaporation and cooling crystallization, the results revealed a generation of co-crystals with enhanced solubility by liquid drop grinding method. Hence, this process was further explored to investigate various formulations and process parameters that could significantly affect the crystal solubility, dissolution, and micrometric properties. RESULTS: The solubility of TEL co-crystals was enhanced by L-lysine. Further, the optimized batch was subjected to its micrometric evaluation and physiochemical characterization like FT-IR, NMR, PXRD. The result of the micrometric evaluation showed better results as compared to standards. The dissolution studies also showed a better dissolution rate for TEL co-crystal tablets than TEL tablets formulation. CONCLUSION: Co-crystals of TEL with L-lysine showed better solubility and dissolution rate.
Subject(s)
Crystallography , Lysine , Telmisartan/chemistry , Amino Acids/chemistry , Pharmaceutical Preparations , Solubility , Spectroscopy, Fourier Transform InfraredABSTRACT
Crystal engineering approach was utilized for the development of different multicomponent solid forms of telmisartan (TEL) to improve its oral bioavailability. In this context, two cocrystals, gentisic acid (GA) and maleic acid (MA), while two eutectic mixtures, para-aminobenzoic acid (PABA) and adipic acid (AA), were successfully prepared and characterized by different analytical tools. Both the cocrystals exhibited characteristic heterosynthons, viz. OHacidâ¯Narom and OHacidâ¯O, to propagate new network. Structural features of coformers has been correlated with the outcomes of cocrystallization approach. Coformers having auxiliary functionality in addition to complementary functional groups have high propensity to generate cocrystals. However, multicomponent where auxiliary functionality is lacking, such combinations, is shown to form eutectic mixtures owing to strong homomeric interaction. Besides, the developed cocrystals and eutectic mixtures showed higher aqueous solubility (3-5.5-fold) and intrinsic dissolution rate (1-2.6-fold) over pure TEL. In vivo studies also revealed significant improvement in relative bioavailability (2-2.6-fold). The study also shed light on the implications of eutectic mixtures in mitigating the solubility issues of drugs which are often considered negative results of cocrystallization strategy.
Subject(s)
Biological Products/chemical synthesis , Biological Products/pharmacokinetics , Telmisartan/chemical synthesis , Telmisartan/pharmacokinetics , Animals , Antihypertensive Agents/chemical synthesis , Antihypertensive Agents/pharmacokinetics , Biological Availability , Crystallization/methods , Male , Rats , Rats, Wistar , Solubility , Structure-Activity RelationshipABSTRACT
The aim of the present study was to compare the dissolution rate and in vivo biopharmaceutical performance of 2 polymorphic forms (form I and II) of ambrisentan and correlate with their surface molecular environment. Dominance of various functionalities on the surface of specific crystal facets of both forms was predicted by Bravais-Friedel-Donnay-Harker method. Hirshfeld surface analysis maps and 2D fingerprint plots indicate a difference in shape index, curvedness, and relative percentage contribution of various contacts in both forms. Pre- and post-intrinsic dissolution compact studied by atomic force microscopy showed a significant difference in surface roughness and defects formation in form II as compared to form I which is attributed to the presence of more hydrophilic surfaces. The hydrophilic molecular surface environment of form II is ascribed to its improved intrinsic dissolution rate than form I. Furthermore, in vivo pharmacokinetic study also showed significantly higher AUC0-24 and Cmax in form II compared to form I. Overall, this study demonstrates that form I and II of ambrisentan exhibited the differential surface anisotropy which has significant implications on their biopharmaceutical performance.
Subject(s)
Biological Products/chemistry , Phenylpropionates/chemistry , Pyridazines/chemistry , Anisotropy , Crystallization/methods , Hydrophobic and Hydrophilic Interactions , SolubilityABSTRACT
The present work highlights a novel polymorph (form II) of ambrisentan (AMT), a selective endothelin type A (ETA) receptor antagonist used in the treatment of pulmonary arterial hypertension (PAH). Form II was isolated by solution crystallization and characterised by differential scanning calorimetry, powder X-ray diffraction, solution calorimetry and aqueous solubility. The single crystal X-ray diffraction shows that it crystallizes in monoclinic system with space group P21/c different from the form I (commercial form). Form II was found to be enantiotropically related to form I. Apparent solubility of form II was performed in 0.1â¯N HCl (pH 1.2) was found to be higher (1.5 fold) than of form I. Solution mediated and stress-induced phase transformation studies revealed conversion of form II to form I. Accelerated stability studies (40⯰C & 75% RH) also reveal that form II converted to form I after one month. However, this does not belittle the improved solubility of a new solid form.
Subject(s)
Phenylpropionates/blood , Pyridazines/blood , Calorimetry, Differential Scanning/methods , Crystallization/methods , Crystallography, X-Ray/methods , Powders/chemistry , Solubility , Water/chemistry , X-Ray Diffraction/methodsABSTRACT
The present research work highlights the development of multicomponent solid form of the antihypertensive drug irbesartan (IRB) to improve its biopharmaceutical attributes. Mechanochemical synthesis of a new solid form of IRB with coformers having antioxidant properties (syringic acid, nicotinic acid, and ascorbic acid) resulted into three eutectic mixtures (EMs). Formation of eutectic was ascertained by differential scanning calorimetry whereas exact stoichiometry (50/50% w/w) was established by phase diagram and Tamman's triangle. The strong homomeric interaction between individual components and steric hindrances is responsible for the eutectic formation. EMs exhibited superior apparent solubility (five- to nine fold) and significant enhancement in intrinsic dissolution rate (two- to three fold) as compared to the plain drug. In vivo pharmacokinetic and in vivo pharmacodynamic studies revealed a significant improvement in the biopharmaceutical performance of EMs. Marked protection against oxidative stress was observed in EMs over plain drug by controlling the level/activity of plasma H2O2 and antioxidant enzymes (superoxide dismutase and catalase) in the kidney matrix of dexamethasone (Dexa)-induced hypertensive rats. Thus, these solid forms of IRB can serve as viable multicomponent forms to be translated into product development for better therapeutic efficacy in the management of hypertension.
Subject(s)
Antihypertensive Agents/chemistry , Antioxidants/chemistry , Biphenyl Compounds/chemistry , Hypertension/drug therapy , Tetrazoles/chemistry , Animals , Antihypertensive Agents/pharmacokinetics , Antihypertensive Agents/therapeutic use , Antioxidants/pharmacokinetics , Antioxidants/therapeutic use , Ascorbic Acid/chemistry , Biphenyl Compounds/pharmacokinetics , Biphenyl Compounds/therapeutic use , Calorimetry, Differential Scanning , Gallic Acid/analogs & derivatives , Gallic Acid/chemistry , Hydrogen Peroxide/blood , Hypertension/chemically induced , Hypertension/enzymology , Irbesartan , Kidney/drug effects , Kidney/enzymology , Male , Niacin/chemistry , Rats , Solubility , Tetrazoles/pharmacokinetics , Tetrazoles/therapeutic useABSTRACT
OBJECTIVES: This study aimed to improve biopharmaceutical parameters of the poorly soluble antihypertensive drug, felodipine, by preparing multicomponent solid forms using three coformers, viz. imidazole, nicotinamide and malonic acid. METHODS: The multicomponent solid forms were prepared by mechanochemical synthesis and characterised by various analytical techniques. These solid forms were further assessed for their physicochemical parameters. Pharmacokinetic and in-vivo antihypertensive activity was performed in rats. KEY FINDINGS: Felodipine (FEL) was found to be cocrystallised with imidazole (FEL-IM) while it formed eutectic with nicotinamide (FEL-NCT) and malonic acid (FEL-MA). Cocrystal was sustained by NH N and NH .O hydrogen-bonded network. Solubility and intrinsic dissolution studies in 0.1 N HCl (pH 1.2) revealed that eutectics exhibited higher solubility and release rate than cocrystal vis-a-vis pure drug and were found to be stable under accelerated storage condition. Significant enhancement of bioavailability was observed in eutectics (3.5- to twofold) and cocrystal (1.3-fold) compared with the pure drug. Antihypertensive activity of new solid forms in an animal model showed a marked decrease in systolic blood pressure. CONCLUSIONS: Mechanochemical approach was successful to prepare multicomponent solid forms that have the potential to improve biopharmaceutical parameters of the poorly soluble drug, FEL.
Subject(s)
Antihypertensive Agents/chemistry , Antihypertensive Agents/pharmacology , Felodipine/chemistry , Felodipine/pharmacology , Animals , Antihypertensive Agents/metabolism , Biological Availability , Chemistry, Pharmaceutical/methods , Crystallization/methods , Drug Compounding/methods , Drug Stability , Felodipine/metabolism , Male , Malonates/chemistry , Rats , Rats, Wistar , Solubility , X-Ray DiffractionABSTRACT
The present study deals with the application of mechanochemical approach for the preparation of drug-drug multicomponent solid forms of three poorly soluble antihypertensive drugs (telmisartan, irbesartan and hydrochlorothiazide) using atenolol as a coformer. The resultant solid forms comprise of cocrystal (telmisartan-atenolol), coamorphous (irbesartan-atenolol) and eutectic (hydrochlorothiazide-atenolol). The study emphasizes that solid-state transformation of drug molecules into new forms is a result of the change in structural patterns, diminishing of dimers and creating new facile hydrogen bonding network based on structural resemblance. The propensity for heteromeric or homomeric interaction between two different drugs resulted into diverse solid forms (cocrystal/coamorphous/eutectics) and become one of the interesting aspects of this research work. Evaluation of these solid forms revealed an increase in solubility and dissolution leading to better antihypertensive activity in deoxycorticosterone acetate (DOCA) salt-induced animal model. Thus, development of these drug-drug multicomponent solid forms is a promising and viable approach to addressing the issue of poor solubility and could be of considerable interest in dual drug therapy for the treatment of hypertension.
Subject(s)
Antihypertensive Agents/administration & dosage , Animals , Antihypertensive Agents/chemistry , Atenolol/administration & dosage , Benzimidazoles/administration & dosage , Benzoates/administration & dosage , Biphenyl Compounds/administration & dosage , Crystallization , Drug Combinations , Female , Hydrochlorothiazide/administration & dosage , Irbesartan , Rats , Rats, Wistar , Solubility , Telmisartan , Tetrazoles/administration & dosageABSTRACT
Traditional herbal medicines (THMs) are gaining popularity worldwide as an alternative approach to prescription drugs for many reasons including a general perception that they are safe. But recently there have been number of reported studies that reveal adulteration of THMs with undeclared synthetic drugs, which may potentially cause serious toxic adverse effects. This paper reviews the various classes of synthetic drugs that were found to be adulterated in THMs worldwide. The main focus is to highlight newer analytical tools used to detect adulteration. Due to the advancement in hyphenated techniques like liquid chromatography tandem mass spectrometry (LC-MS/MS), gas chromatography-tandem mass spectrometry (GC-MS/MS) and other conventional tools, it has become possible to detect synthetic drugs and their structural analogues as adulterants even if they are present in small quantities. This review also gives an overview of health-related risks after consuming such spurious products and challenges for future perspectives to control such type of malpractices.
Subject(s)
Chromatography, Liquid/methods , Drug Contamination , Magnetic Resonance Spectroscopy/methods , Mass Spectrometry/methods , Pharmaceutical Preparations/analysis , Plants, Medicinal/chemistry , HumansABSTRACT
Liquid chromatography tandem mass chromatography (LC-MS/MS) is an important hyphenated technique for quantitative analysis of drugs in biological fluids. Because of high sensitivity and selectivity, LC-MS/MS has been used for pharmacokinetic studies, metabolites identification in the plasma and urine. This manuscript gives comprehensive analytical review, focusing on chromatographic separation approaches (column packing materials, column length and mobile phase) as well as different acquisition modes (SIM, MRM) for quantitative analysis of glucocorticoids and stimulants. This review is not meant to be exhaustive but rather to provide a general overview for detection and confirmation of target drugs using LC-MS/MS and thus useful in the doping analysis, toxicological studies as well as in pharmaceutical analysis.