The effect of chemical and structural modifiers on the haemostatic process and cytotoxicity of the beta-chitin patch.

Beta-chitin patch has previously been proven to be an effective haemostat, but whether modifying the patch affects its efficacy and safety, remains unanswered. In this study, the patch was modified using polyethylene oxide, Pluronic-F127, calcium, increased thickness or polyphosphate, and their effect on the process of haemostasis and cytotoxicity was tested and compared with standard-of-care, Surgicel and FloSeal. Whole blood collected from volunteers was applied to the patches to test their whole blood clotting and thrombin generation capacities, whilst platelet isolates were used to test their platelet aggregation ability. The fluid absorption capacity of the patches was tested using simulated body fluid. Cytotoxicity of the patches was tested using AlamarBlue assays and PC12 cells and the results were compared with the standard-of-care. In this study, beta-chitin patch modifications failed to improve its whole blood clotting, platelet aggregation and thrombin generation capacity. Compared to non-modified patch, modifications with polyethylene oxide or calcium reduced platelet aggregation and thrombin generation capacity, while increasing the thickness or adding polyphosphate decreased platelet aggregation capacity. The cytotoxicity assays demonstrated that the beta-chitin patches were non-toxic to cells. In vivo research is required to evaluate the safety and efficacy of the beta-chitin patches in a clinical setting.

Preparation, Properties and Cell Biocompatibility of Room Temperature LCST-Hydrogels Based on Thermoresponsive PEO Stars.

A series of star and linear polymers based on a poly(ethylene oxide) core and poly(diethylene glycol ethyl ether acrylate) outer arms were synthesised by atom-transfer radical polymerization. The polydispersity of the polymers were low, showing good control of initiation and growth. They all showed lower critical solution (LCST) behaviour, and at 30% concentration most gelled at or below room temperature. The behaviour depended on the number and length of the arms, with the polymers with longer arms gelling at a lower temperature and producing stiffer gels. The shear modulus of the gels varied between 1 and 48 kPa, with the gelling temperature varying between 16 and 23 °C. Attempted cell cultures with the polymers proved unsuccessful, which was determined to be due to the high concentration of polymers needed for gelling.

Formation of a robust, double-walled LiMOF from an L-shaped di-substituted N-heterocyclic adamantane-based ligand.

The properties of adamantane render it an attractive building block towards the synthesis of robust frameworks. This work describes the synthesis of the L-shaped 1,3-bis(3'-carboxypyridine)adamantane (L1) ligand and the corresponding Li(i), Zn(ii) and Cu(ii) frameworks. Three topologically analogous Li(i) frameworks LiMOF12, LiMOF30 and LiMOF50 are reported, with calculated solvent accessible void volumes of 46, 43 and 36%, respectively. The reaction between the carboxylate groups of L1 and the Li(i) cations resulted in the formation of Li-carboxylate rods. The Li-carboxylate rods contributed to the formation of a double-walled MOF with large, open one dimensional channels. The synergistic effect of the double wall, lithium-carboxylate rods and the adamantane core itself, resulted in the formation of a robust network stable up to temperatures of 300-350 °C and a minimum of three months stability in air. Furthermore, complexation of L1 with Cu(BF4)2·H2O and Zn(CF3SO3)2 provided a 2D → 3D interpenetrated network containing a classic dimeric copper paddle-wheel SBU, and an infinite 1D chain which extended into a 3D structure facilitated by hydrogen-bonding interactions, respectively.

Tough polymeric hydrogels using ion-pair comonomers.

Hydrogels with excellent mechanical properties were synthesized by radical photo-polymerization of three different types of ion-pair comonomers (IPC), without requiring any chemical cross-linking agent. Insoluble gels formed only at a specific solution concentration range, which was unique to the particular salt. The gels changed properties after one day soaking in water, becoming less stiff and more extendible, but remained stable after that. Strains of up to 4000% were measured for one salt pair and ultimate stresses of up to 2.53 MPa for another. Self-healing properties were noted along with some recovery of creep, due to the non-covalent nature of the gel. These properties arise through a combination of electrostatic and hydrophobic interactions of the polymer chains. Immersion of the gels in salt solution screened the electrostatic interactions, resulting in dissolution of the gel.

The structure and Hirshfeld surface analysis of the salt 3-methacryl-amido-N,N,N-tri-methyl-propan-1-aminium 2-acryl-amido-2-methyl-propane-1-sulfonate.

The title salt, C10H21N2O+·C7H12NO4S-, comprises a 3-methacryl-amido-N,N,N-tri-methyl-propan-1-aminium cation and a 2-acryl-amido-2-methyl-propane-1-sulfonate anion. The salt crystallizes with two unique cation-anion pairs in the asymmetric unit of the ortho-rhom-bic unit cell. The crystal studied was an inversion twin with a 0.52 (4):0.48 (4) domain ratio. In the crystal, the cations and anions stack along the b-axis direction and are linked by an extensive series of N-H⋯O and C-H⋯O hydrogen bonds, forming a three-dimensional network. Hirshfeld surface analysis was carried out on both the asymmetric unit and the two individual salts. The contribution of inter-atomic contacts to the surfaces of the individual cations and anions are also compared.

Structure and Hirshfeld surface analysis of the salt N,N,N-trimethyl-1-(4-vinyl-phen-yl)methanaminium 4-vinyl-benzene-sulfonate.

In the title compound, the asymmetric unit comprises an N,N,N-trimethyl-1-(4-vinyl-phen-yl)methanaminium cation and a 4-vinyl-benzene-sulfonate anion, C12H18N+·C8H7O3S-. The salt has a polymerizable vinyl group attached to both the cation and the anion. The methanaminium and vinyl substituents on the benzene ring of the cation subtend angles of 86.6 (3) and 10.5 (9)° to the ring plane, while the anion is planar excluding the sulfonate O atoms. The vinyl substituent on the benzene ring of the cation is disordered over two sites with a refined occupancy ratio of 0.542 (11):0.458 (11). In the crystal, C-H⋯O hydrogen bonds dominate the packing and combine with a C-H⋯π(ring) contact to stack the cations and anions along the a-axis direction. Hirshfeld surface analysis of the salt and of the individual cation and anion components is also reported.

Gel actuators based on polymeric radicals.

Low-voltage electrochemical actuation of radical polymer gels has been demonstrated in an organic electrolyte. Polymer gels were prepared by post-modification of active-ester precursor gels with an amine-functionalised radical. A combination of few-layer graphene and multiwall carbon nanotubes gave high conductivity and improved actuation in the gels, with 32% linear actuation. The actuator system showed good stability over at least 10 cycles, showing its promise. The cycle time was several hours due to mass-transport limited transport of ions and solvent into the device.

A Design Strategy for Single-Stranded Helicates using Pyridine-Hydrazone Ligands and PbII.

The reactions of py-hz ligands (L1-L5) with Pb(CF3 SO3 )2 ⋅H2 O resulted in some rare examples of discrete single-stranded helical PbII complexes. L1 and L2 formed non-helical mononuclear complexes [PbL1(CF3 SO3 )2 ]⋅CHCl3 and PbL2(CF3 SO3 )2 ][PbL2CF3 SO3 ]CF3 SO3 ⋅CH3 CN, which reflected the high coordination number and effective saturation of PbII by the ligands. The reaction of L3 with PbII resulted in a dinuclear meso-helicate [Pb2 L3(CF3 SO3 )2 Br]CF3 SO3 ⋅CH3 CN with a stereochemically-active lone pair on PbII . L4 directed single-stranded helicates with PbII , including [Pb2 L4(CF3 SO3 )3 ]CF3 SO3 ⋅CH3 CN and [Pb2 L4CF3 SO3 (CH3 OH)2 ](CF3 SO3 )3 ⋅2 CH3 OH⋅2 H2 O. The acryloyl-modified py-hz ligand L5 formed helical and non-helical complexes with PbII , including a trinuclear PbII complex [Pb3 L5(CF3 SO3 )5 ]CF3 SO3 ⋅3CH3 CN⋅Et2 O. The high denticity of the long-stranded py-hz ligands L4 and L5 was essential to the formation of single-stranded helicates with PbII .

A mechanically strengthened polyacrylamide gel matrix fully compatible with electrophoresis of proteins and nucleic acids.

Polyacrylamide gel electrophoresis is a universal tool in a biochemist's toolkit for protein and nucleic acid separation and subsequent visualisation and analysis. The standard formulation of polyacrylamide gels consists of acrylamide (ACM) monomer crosslinked with bisacrylamide (MBA) which creates a gel with excellent sieving properties but which is mechanically fragile and prone to tearing during post-electrophoresis manipulations involved in visualisation and analysis. By adding a poly(ethylene oxide) macro-crosslinker to the standard gel formulation, we have created a tough gel matrix that can be used to fractionate proteins and nucleic acids by polyacrylamide gel electrophoresis. The protein and nucleic acid resolving capabilities and performance during staining and electroblotting of the tough gel matrix rivals that of conventional acrylamide/bisacrylamide gels. The tough gel matrix is resistant to tear and remarkably elastic, capable of stretching to over four times its original length before breaking, and represents a significant improvement over standard polyacrylamide gel formulations.

Hyperelastic Tough Gels through Macrocross-Linking.

The wet and soft nature of hydrogels makes them useful as a mimic for biological tissues, and in uses such as actuators and drug delivery vehicles. For many applications the mechanical performance of the gel is critical, but gels are notoriously weak and prone to fracture. Free radical polymerization is a very powerful technique allowing for fine spatial and temporal control of polymerization, but also allows for the use of a wide range of monomers and mixtures. In this work, it is demonstrated that extremely tough and extensible hydrogels can be readily produced through simple radical polymerization of acrylamide or acrylic acid with a poly(ethylene oxide) macrocross-linker. These gels, with a water content of 85%, are extremely elastic with an extension much more than 15 000% at 9 MPa true stress. They can be compressed over 98% at a stress of 17 MPa. They are notch-insensitive, and the usual trouser tear test does not work because the tear simply does not propagate. This highly extensible nature seems to be related to very long chain lengths between cross-links and efficient incorporation of chains into the network.

Crystal structures of the polymer precursors 3-(2,5-dimeth-oxy-3,4,6-tri-methyl-phen-yl)propyl methacrylate and 3-(2,4,5-trimethyl-3,6-dioxo-cyclo-hexa-1,4-dien-yl)propyl methacrylate.

The closely related title compounds, 3-(2,5-dimeth-oxy-3,4,6-tri-methyl-phen-yl)propyl methacrylate, C18H26O4 (I), and 3-(2,4,5-trimethyl-3,6-dioxo-cyclo-hexa-1,4-dien-yl)propyl methacrylate, C16H20O4 (II), are monomers suitable for the preparation of redox polymers. They consist of a propyl-methacrylate group and three methyl substituents on di-meth-oxy-benzene and quinone cores, respectively. Both crystal structures feature weak C-H⋯O hydrogen bonds and C-H⋯π(ring) contacts between methyl groups and the six-membered rings.

Antimicrobial Properties of Tris(homoleptic) Ruthenium(II) 2-Pyridyl-1,2,3-triazole "Click" Complexes against Pathogenic Bacteria, Including Methicillin-Resistant Staphylococcus aureus (MRSA).

A series of tris(homoleptic) ruthenium(II) complexes of 2-(1-R-1H-1,2,3-triazol-4-yl)pyridine "click" ligands (R-pytri) with various aliphatic (R = butyl, hexyl, octyl, dodecyl, and hexdecyl) and aromatic (R = phenyl and benzyl) substituents was synthesized in good yields (52%-66%). The [Ru(R-pytri)3]2+(X-)2 complexes (where X- = PF6- or Cl-) were characterized by elemental analysis, high-resolution electrospray ionization mass spectrometry (HR-ESI-MS), 1H and 13C nuclear magnetic resonance (NMR) and infrared (IR) spectroscopies, and the molecular structures of six of the compounds confirmed by X-ray crystallography. 1H NMR analysis showed that the as-synthesized materials were a statistical mixture of the mer- and fac-[Ru(R-pytri)3]2+ complexes. These diastereomers were separated using column chromatography. The electronic structures of the mer- and fac-[Ru(R-pytri)3]2+ complexes were examined using ultraviolet-visible (UV-Vis) spectroscopy and cyclic and differential pulse voltammetry. The family of R-pytri ligands and the corresponding mer- and fac-[Ru(R-pytri)3]2+ complexes were tested for antimicrobial activity in vitro against both Staphylococcus aureus and Escherichia coli bacteria. Agar-based disk diffusion assays indicated that two of the [Ru(R-pytri)3](X)2 complexes (where X = PF6- and R = hexyl or octyl) displayed good antimicrobial activity against Gram-positive S. aureus and no activity against Gram-negative E. coli at the concentrations tested. The most active [Ru(R-pytri)3]2+ complexes ([Ru(hexpytri)3]2+ and Ru(octpytri)3]2+) were converted to the water-soluble chloride salts and screened for their activity against a wider range of pathogenic bacteria. As with the preliminary screen, the complexes showed good activity against a variety of Gram-positive strains (minimum inhibitory concentration (MIC) = 1-8 µg/mL) but were less effective against Gram-negative bacteria (MIC = 16-128 µg/mL). Most interestingly, in some cases, the ruthenium(II) "click" complexes proved more active (MIC = 4-8 µg/mL) than the gentamicin control (MIC = 16 µg/mL) against two strains of methicillin-resistant S. aureus (MRSA) (MR 4393 and MR 4549). Transmission electron microscopy (TEM) experiments and propidium iodide assays suggested that the main mode of action for the ruthenium(II) R-pytri complexes was cell wall/cytoplasmic membrane disruption. Cytotoxicity experiments on human dermal keratinocyte and Vero (African green monkey kidney epithelial) cell lines suggested that the complexes were only modestly cytotoxic at concentrations well above the MIC values.

Cyclodextrin-polyhydrazine degradable gels for hydrophobic drug delivery.

An injectable and biocompatible hydrogel system was designed for hydrophobic drug delivery. This hydrogel consisted of degradable polymers with cyclodextrin (CD) moieties. CD groups were used to increase the solubility of a hydrophobic molecule (nicardipine) in an aqueous solution through the formation of the inclusion complex. Two sets of gels were prepared by mixing oxidized dextran (DA) and CD functionalized polyhydrazine (PH) at physiological conditions and different level of crosslinking via hydrazone bonds. Cytotoxicity studies on the gels and their components confirmed the biocompatibility of these materials. Gel-30 with higher crosslinking density showed a two week degradation period whereas this period was 10days for gel-10, with lower crosslinking density, to complete degradation. The results from swelling tests and rheological measurements were also found to be dependent on crosslinking density of the hydrogels. Release profile of the hydrogel displayed a sustained release of nicardipin up to 6days for gel-30 and a 4day release with initial burst release for gel-10.

Strong poly(ethylene oxide) based gel adhesives via oxime cross-linking.

There is a demand for materials to replace or augment the use of sutures and staples in surgical procedures. Currently available commercial surgical adhesives provide either high bond strength with biological toxicity or polymer and protein-based products that are biologically acceptable (though with potential sensitizing potential) but have much reduced bond strength. It is desirable to provide novel biocompatible and biodegradable surgical adhesives/sealants capable of high strength with minimal immune or inflammatory response. In this work, we report the end group derivatization of 8-arm star PEOs with aldehyde and amine end groups. Gels were prepared employing the Schiff-base chemistry between the aldehydes and the amines. Gel setting times, swelling behavior and rheological characterization were carried out for these gels. The mechanical-viscoelastic properties were found to be directly proportional to the crosslinking density of the gels, the 10K PEO gel was stiffer in comparison to the 20K PEO gel. The adhesive properties of these gels were tested using porcine skin and showed excellent adhesion properties. Cytotoxicity studies were carried out for the individual gel components using two different methods: (a) Crystal Violet Staining assay (CVS assay) and (b) impedance and cell index measurement by the xCELLigence system at concentrations >5%. Gels prepared by mixing 20% w/w solutions were also tested for cytotoxicity. The results revealed that the individual gel components as well as the prepared gels and their leachables were non-cytotoxic at these concentrations. STATEMENT OF SIGNIFICANCE: This work presents a new type of glue that is aimed at surgery applications using a water soluble star shaped polymer. It show excellent adhesion to skin and is tough and easy to use. We show that it is very biocompatible based on tests on live human cells, and could therefore in principle be used for internal surgery. Comparison with other reported and commercial glues shows that it is stronger than most, and does not swell in water to the same degree as many other water based bioadhesives.

Synthesis of triphenylphosphonium vitamin E derivatives as mitochondria-targeted antioxidants.

A series of mitochondria-targeted antioxidants comprising a lipophilic triphenylphosphonium cation attached to the antioxidant chroman moiety of vitamin E by an alkyl linker have been prepared. The synthesis of a series of mitochondria-targeted vitamin E derivatives with a range of alkyl linkers gave compounds of different hydrophobicities. This work will enable the dependence of antioxidant defence on hydrophobicity to be determined in vivo.

Structure and packing of aminoxyl and piperidinyl acrylamide monomers.

The closely related title compounds, 4-acrylamido-2,2,6,6-tetramethylpiperidine-1-oxyl, C12H21N2O2, (I), and N-(2,2,6,6-tetramethylpiperidin-4-yl)acrylamide monohydrate, C12H22N2O·H2O, (II), are important monomers in the preparation of redox-active polymers. They comprise an acrylamide group of the usual s-cis configuration appended to a 2,2,6,6-tetramethyl-substituted piperidine-1-oxyl radical or a piperidinyl chair, respectively. The adjacent amide and piperidinyl H atoms are approximately trans across the C-N bond. The packing in (I) is dominated by N-H...O hydrogen bonds; these are supported by C-H...O contacts to form an R2(1)(6) ring repeat, a motif which has been observed in other acrylamide structures. In (II), hydrogen bonds are again key to the packing arrangements. In this case, the incorporated solvent water molecule acts as an acceptor through its O atom and as a donor through both H atoms, binding three adjacent piperidinylacrylamide molecules into layers. In both structures, weak C-H...O contacts involving the piperidinyl methyl H atoms and a proximal acrylamide carbonyl O atom extend the structure in the third dimension.

Reducing the Oxidation Level of Dextran Aldehyde in a Chitosan/Dextran-Based Surgical Hydrogel Increases Biocompatibility and Decreases Antimicrobial Efficacy.

A highly oxidized form of a chitosan/dextran-based hydrogel (CD-100) containing 80% oxidized dextran aldehyde (DA-100) was developed as a post-operative aid, and found to significantly prevent adhesion formation in endoscopic sinus surgery (ESS). However, the CD-100 hydrogel showed moderate in vitro cytotoxicity to mammalian cell lines, with the DA-100 found to be the cytotoxic component. In order to extend the use of the hydrogel to abdominal surgeries, reformulation using a lower oxidized DA (DA-25) was pursued. The aim of the present study was to compare the antimicrobial efficacy, in vitro biocompatibility and wound healing capacity of the highly oxidized CD-100 hydrogel with the CD-25 hydrogel. Antimicrobial studies were performed against a range of clinically relevant abdominal microorganisms using the micro-broth dilution method. Biocompatibility testing using human dermal fibroblasts was assessed via a tetrazolium reduction assay (MTT) and a wound healing model. In contrast to the original DA-100 formulation, DA-25 was found to be non-cytotoxic, and showed no overall impairment of cell migration, with wound closure occurring at 72 h. However, the lower oxidation level negatively affected the antimicrobial efficacy of the hydrogel (CD-25). Although the CD-25 hydrogel's antimicrobial efficacy and anti-fibroblast activity is decreased when compared to the original CD-100 hydrogel formulation, previous in vivo studies show that the CD-25 hydrogel remains an effective, biocompatible barrier agent in the prevention of postoperative adhesions.

Crystal structures of two bis-(iodo-meth-yl)benzene derivatives: similarities and differences in the crystal packing.

The isomeric derivatives 1,2-bis-(iodo-meth-yl)benzene, (I), and 1,3-bis-(iodo-meth-yl)benzene (II), both C8H8I2, were prepared by metathesis from their di-bromo analogues. The ortho-derivative, (I), lies about a crystallographic twofold axis that bis-ects the C-C bond between the two iodo-methyl substituents. The packing in (I) relies solely on C-H⋯I hydrogen bonds supported by weak parallel slipped π-π stacking inter-actions [inter-centroid distance = 4.0569 (11) Å, inter-planar distance = 3.3789 (8) Šand slippage = 2.245 Å]. While C-H⋯I hydrogen bonds are also found in the packing of (II), type II, I⋯I halogen bonds [I⋯I = 3.8662 (2) Å] and C-H⋯π contacts feature prominently in stabilizing the three-dimensional structure.

Characterization of the in vivo host response to a bi-labeled chitosan-dextran based hydrogel for postsurgical adhesion prevention.

In developing a chitosan/dextran-based (CD) hydrogel as an adhesion prevention postsurgical aid, the in vivo biodegradation rate, biodistribution, and inflammatory response are important parameters to the biomedical device design. Herein, for the first time, a CD hydrogel was prepared by mixing aqueous solutions of a near infrared (NIR) labeled succinylated chitosan (SC) and tritiated [(3) H] oxidized dextran (DA). The biodegradation and biodistribution of the NIR/[(3) H]-CD hydrogel was tracked noninvasively using NIR fluorescence imaging, and by liquid scintillation counting (LSC) of organs/tissues after subcutaneous injection in BALB/c mice. The inflammatory response was assessed by measuring serum cytokine levels using a Bio-plex assay and by histological examination of injection site tissue. Fluorescence imaging showed the hydrogel to degrade in under a week. LSC revealed the hydrogel to reside mainly at the injection site, and excreted primarily via the urine within the first 48 h. The CD hydrogel showed a mild inflammatory response as cytokine levels were comparable to saline injected controls. Histological examination of injection site tissue confirmed the cytokine results. In summary, the CD hydrogel's in vivo biodegradation rate, biodistribution, and inflammatory response was determined. Our results indicate that the CD hydrogel has an appropriate biocompatibility after s.c. administration.

In vitro biocompatibility and cellular interactions of a chitosan/dextran-based hydrogel for postsurgical adhesion prevention.

In this paper, we report the in vitro biocompatibility and cellular interactions of a chitosan/dextran-based (CD) hydrogel and its components as determined by mutagenicity, cytotoxicity, cytokine/chemokine response, and wound healing assays. The CD hydrogel, developed for postsurgical adhesion prevention in ear, nose, and throat surgeries, was shown by previously published experiments in animal and human trials to be effective. The hydrogel was synthesized from the reaction between succinyl chitosan (SC) and oxidized dextran (DA). Cytotoxicity was assessed in an xCELLigence system and cytokine/chemokine responses were measured by ELISA in human macrophage, nasopharyngeal epithelial, and dermal fibroblast cells. A wound healing model utilized nasopharyngeal epithelial cells. CD hydrogel and DA were nonmutagenic in the Ames test. CD hydrogel showed moderate cytotoxicity for the cell lines, DA being the cytotoxic component. Some inhibition of wound healing occurred due to the cytotoxic nature of DA. Cells cultured with CD hydrogel showed no increase in TNF-α, IL-10, and IL-8 levels. It is hypothesized that the cytotoxicity of DA is moderated when reacted with SC and that CD hydrogel inhibits unwanted fibroblastic invasion preventing scarring and adhesions. Together with the previously published human and animal trial data, the results indicate CD hydrogel is biocompatible in the setting of endoscopic sinus surgery. This work represents the first study of CD hydrogel with human cell lines and provides essential information for its future application in biomedicine.