ABSTRACT
Over the past two decades, nanofillers have attracted significant interest due to their proven chemical, mechanical, and tribological performances. However, despite the significant progress realized in the application of nanofiller-reinforced coatings in various prominent fields, such as aerospace, automobiles and biomedicine, the fundamental effects of nanofillers on the tribological properties of coatings and their underlying mechanisms have rarely been explored by subdividing them into different sizes ranging from zero-dimensional (0D) to three-dimensional (3D) architectures. Herein, we present a systematic review of the latest advances on multi-dimensional nanofillers for enhancing the friction reduction and wear resistance of metal/ceramic/polymer matrix composite coatings. Finally, we conclude with an outlook for future investigations on multi-dimensional nanofillers in tribology, providing possible solutions for the key challenges in their commercial applications.
ABSTRACT
This study evaluated the adsorption of five volatile organic compounds (VOCs) on Opoka, precipitated silica, and palygorskite, to elucidate the effect of their pore size on VOCs adsorption. The adsorption capacity of these adsorbents is not only highly correlated with their surface area and pore volume, but also notably improved by the presence of micropores. The variation in adsorption capacity for different VOCs was primarily influenced by their boiling point and polarity. Palygorskite, which had the smallest total pore volume (0.357 cm3/g) but the largest micropore volume (0.043 cm3/g) among the three adsorbents, exhibited the highest adsorption capacity for all tested VOCs. Additionally, the study constructed slit pore models of palygorskite with micropores (0.5 and 1.5 nm) and mesopores (3.0 and 6.0 nm), calculated and discussed the heat of adsorption, concentration distribution, and interaction energy of VOCs adsorbed on different pore models. The results revealed that the adsorption heat, concentration distribution, total interaction energy, and van der Waals energy decrease with increasing pore size. The concentration of VOCs in 0.5 nm pore was nearly three times that in 6.0 nm pore. This work can also provide guidance for further research on using adsorbents with mixed microporous and mesoporous structures to control VOCs.
ABSTRACT
Splenic abscesses in children are very rare, and multiple splenic abscesses are rarer. These lesions are difficult to diagnose quickly because of their low incidence and the low specificity of the associated clinical and imaging findings. The treatment of splenic abscesses includes conservative treatment, percutaneous drainage, and splenectomy, but the selection criteria for treatment are still unclear. We present a case of a 13-year-old girl with multiple splenic abscesses. Her blood culture report was negative. We eventually confirmed the diagnosis by enhanced magnetic resonance imaging (MRI). The patient underwent a successful laparoscopic total splenectomy, and her symptoms were resolved thereafter.
ABSTRACT
For improving the tribological behaviors of traditional Ti alloys, high-nickel Ti alloy with sinusoidal micropores was prepared by laser additive manufacturing (LAM). MgAl (MA), MA-graphite (MA-GRa), MA-graphenes (MA-GNs), and MA-carbon nanotubes (MA-CNTs) were respectively filled into the Ti-alloy micropores to prepare interface microchannels through high-temperature infiltration. In a ball-on-disk tribopair system, the tribological and regulating behaviors of the microchannels in Ti-base composites were elucidated. The results showed that the regulation functions of MA were noticeably improved at 420 °C, resulting in their superior tribological behaviors than those at other temperatures. It could be concluded that GRa, GNs, and CNTs combined with MA further enhanced the regulation behaviors compared to individual MA lubrication. The following regulation factors were responsible for the excellent tribological properties: the interlayer separation of graphite, which accelerated the plastic flow of MA, improved the interface crack self-healing of Ti-MA-GRa, and regulated the friction and wear resistance abilities. Compared with GRa, GNs were easier to slide, and helped to produce a greater deformation of MA, facilitating a good self-healing of cracks, and further enhancing the wear regulation of Ti-MA-GNs. CNTs showed good synergism with MA to allow the rolling friction, which effectively repaired the cracks to improve interface self-healing, resulting in a better tribological performance of Ti-MA-CNTs compared to Ti-MA-GRa and Ti-MA-GNs.
ABSTRACT
Surface corrosion is considered to be a main reason for the surface pattern damages of copper coin sourced from the Qing Dynasty. In this study, micromorphology and the structural feature of the copper coins were analyzed to determine their corrosion mechanisms. The results revealed that the etching rates successively reduced with decreasing corrosion thickness, possibly because of unique macrofeatures of the surface pattern. Variable phases, bonding morphologies, and three-/two-dimensional structures of Ql-TB (Qianlong-Tongbao) coins were visibly different at the microscale, which induced disproportional stresses and microscopic cracks, facilitating an unhindered entry of oxide and hydroxyl (OH-) ions. These species resulted in the competitive interplay of self-healing and self-degradation mechanisms on the coin surfaces and formed corrosion thickness of ~9.31 µm and a mean corrosion rate of ~2.7%. This study provided an important guideline for preserving microstructures and surface patterns of historical copper coins.