Assessing the Biodegradability of Tire Tread Particles and Influencing Factors.

Abrasion of tire tread, caused by friction between vehicle tires and road surfaces, causes release of tire wear particles (TWPs) into various environmental compartments. These TWPs contribute to chemical, microplastic, and particulate matter pollution. Their fate remains largely unknown, especially regarding the extent and form in which they persist in the environment. The present study investigated (1) the biodegradability of tread particles (TPs) in the form of ground tire tread, (2) how accelerated ultraviolet (UV) weathering affects their biodegradability, and (3) which TP constituents are likely contributors to TP biodegradability based on their individual biodegradability. A series of closed-bottle tests, with aerobic aqueous medium inoculated with activated sludge, were carried out for pristine TPs, UV-weathered TPs, and selected TP constituents; natural rubber (NR), isoprene rubber (IR), butadiene rubber (BR), and treated distillate aromatic extracts (TDAE). Biodegradation was monitored by manometric respirometry, quantifying biological oxygen consumption over 28 days. Pristine TP biodegradability was found to be 4.5%; UV-weathered TPs showed higher biodegradability of 6.7% and 8.0% with similar and increased inoculum concentrations, respectively. The observed TP biodegradation was mainly attributed to biodegradation of NR and TDAE, with individual biodegradability of 35.4% and 8.0%, respectively; IR and BR showed negligible biodegradability. These findings indicate that biodegradability of individual constituents is decreased by a factor of 2 to 5 when compounded into TPs. Through scanning electron microscopy analysis, biodegradation was found to cause surface erosion. Processes of TP biodegradation are expected to change throughout their lifetime as new constituents are incorporated from the road and others degrade and/or leach out. Tire emissions likely persist as particles with an increased fraction of synthetic rubbers and carbon black. Environ Toxicol Chem 2024;43:31-41. © 2023 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Time to integrate "One Health Approach" into nanoplastic research.

Image 1.

Exposure protocol for ecotoxicity testing of microplastics and nanoplastics.

Despite the increasing concern about the harmful effects of micro- and nanoplastics (MNPs), there are no harmonized guidelines or protocols yet available for MNP ecotoxicity testing. Current ecotoxicity studies often use commercial spherical particles as models for MNPs, but in nature, MNPs occur in variable shapes, sizes and chemical compositions. Moreover, protocols developed for chemicals that dissolve or form stable dispersions are currently used for assessing the ecotoxicity of MNPs. Plastic particles, however, do not dissolve and also show dynamic behavior in the exposure medium, depending on, for example, MNP physicochemical properties and the medium's conditions such as pH and ionic strength. Here we describe an exposure protocol that considers the particle-specific properties of MNPs and their dynamic behavior in exposure systems. Procedure 1 describes the top-down production of more realistic MNPs as representative of MNPs in nature and particle characterization (e.g., using thermal extraction desorption-gas chromatography/mass spectrometry). Then, we describe exposure system development for short- and long-term toxicity tests for soil (Procedure 2) and aquatic (Procedure 3) organisms. Procedures 2 and 3 explain how to modify existing ecotoxicity guidelines for chemicals to target testing MNPs in selected exposure systems. We show some examples that were used to develop the protocol to test, for example, MNP toxicity in marine rotifers, freshwater mussels, daphnids and earthworms. The present protocol takes between 24 h and 2 months, depending on the test of interest and can be applied by students, academics, environmental risk assessors and industries.

The Behavior of Planktonic Copepods Minimizes the Entry of Microplastics in Marine Food Webs.

The entry of microplastics (MPs) into marine food webs is a major environmental concern. We investigated how the behavior of planktonic copepods influences the risk of MPs to enter marine food webs by applying a trait-based approach and by combining experiments (bottle incubations and video observations) with biogeographical analyses. We aimed to evaluate which type of feeding behavior is most risky in terms of MP ingestion and which marine geographical areas are more susceptible to MP ingestion by planktonic copepods. We used different species as models of the main foraging behaviors in planktonic copepods: feeding-current, cruising, ambush, and mixed behavior feeding. All behaviors showed a similarly low risk of MP ingestion, up to 1 order of magnitude lower than for similar-sized microalgae. We did not observe any influence of the prey type or MP size (8 and 20 µm) on MP ingestion for any of the behaviors. By mapping the global distribution of feeding behaviors, we showed that feeding-current feeding is the most common behavior, but the risk of MP ingestion remains equally low across the global ocean, independently of the predominant behavior. Overall, our results suggest a low risk of MP ingestion by planktonic copepods and therefore a minimal risk of trophic transfer of MPs via marine pelagic copepods in marine ecosystems.

Finding the tiny plastic needle in the haystack: how field flow fractionation can help to analyze nanoplastics in food.

While the exact health risks associated with nanoplastics are currently the focus of intense research, there is no doubt that humans are exposed to nanoplastics and that food could be a major source of exposure. Nanoplastics are released from plastic materials and articles used during food production, processing, storage, preparation, and serving. They are also likely to enter the food chain via contaminated water, air, and soil. However, very limited exposure data for risk assessment exists so far due to the lack of suitable analytical methods. Nanoplastic detection in food poses a great analytical challenge due to the complexity of plastics and food matrices as well as the small size and expectedly low concentration of the plastic particles. Multidetector field flow fractionation has emerged as a valuable analytical technique for nanoparticle separation over the last decades, and the first studies using the technique for analyzing nanoplastics in complex matrices are emerging. In combination with online detectors and offline analysis, multidetector field flow fractionation is a powerful platform for advanced characterization of nanoplastics in food by reducing sample complexity, which otherwise hampers the full potential of most analytical techniques. The focus of this article is to present the current state of the art of multidetector field flow fractionation for nanoplastic analysis and to discuss future trends and needs aiming at the analysis of nanoplastics in food.

Separating toxicity and shading in algal growth inhibition tests of nanomaterials and colored substances.

Nanoparticles and colored substances can inhibit algal growth by light shading and chemical toxicity. This study presents two complementary approaches to account for shading in algal growth inhibition tests of engineered nanomaterials (ENMs) and colored substances. The first approach distinguishes between shading effects and toxicity by varying the light path in parallel algal growth inhibition tests. This Multiple Path-Length (MPL) test was applied to TiO2 ENMs and the colored substances sodium picramate and Rhodamine B. A left shifting of concentration-response curves, with increasing light path lengths, indicated shading for Rhodamine B, sodium picramate and TiO2 ENMs. EC50-values obtained at the shortest light path length were generally found best suited to quantify the toxicity of ENMs and colored substances. The second approach addresses shading at the cellular level, where particles can attach to the cell surface and affect photo-pigment content and composition. Pigments associated with photosystem I and II were determined at varying light intensities and concentrations of TiO2 ENMs. The photo-pigments that increased in response to physical shading, decreased after TiO2 ENMs exposure. This indicates that toxicity rather than cellular shading dominated the response of algae exposed to TiO2 ENMs. Additional tests were conducted with the nanomaterials CeO2 and goethite to evaluate the applicability of this approach to other ENMs. On this basis, we recommend MPL testing for determining EC50-values that are not confounded by shading in the test solution, and the pigment-based approach for investigating shading on the cellular level.

Unpalatable Plastic: Efficient Taste Discrimination of Microplastics in Planktonic Copepods.

Planktonic copepods are the most abundant animals in the ocean and key players in global biochemical processes. Recent modeling suggests that zooplankton ingestion of microplastics (MPs) can disrupt the biological carbon pump and accelerate a global loss of oceanic oxygen. Here we investigate the behavioral responses and ingestion rates of a model feeding-current generating copepod when exposed to microplastics of different characteristics by small-scale video observations and bottle incubations. We found that copepods rejected 80% of the microplastics after touching them with their mouth parts, in essence exhibiting a kind of taste discrimination. High rejection rates of microplastics were independent of polymer type, shape, presence of biofilms, or sorbed pollutant (pyrene), indicating that microplastics are unpalatable for feeding-current feeding copepods and that post-capture taste discrimination is a main sensorial mechanism in the rejection of microplastics. In an ecological context, taking into account the behaviors of planktonic copepods and the concentrations of microplastics found in marine waters, our results suggest a low risk of microplastic ingestion by zooplankton and a low impact of microplastics on the vertical exportation of fecal pellets.

Reuse of Water in Laundry Applications with Micro- and Ultrafiltration Ceramic Membrane.

This study compares the performance of a microfiltration membrane, made by silicon carbide (SiC) and an ultrafiltration membrane, made by zirconia (ZrO2), in the treatment of wastewater from a washing machine designed to clean industrial tents. The filtration of deionized water, containing model microplastics (i.e., nylon fiber), was performed. This was followed by the filtration of real wastewater from a single washing cycle of industrial tents, made from polyvinyl chloride (PVC) textile. The filtration parameters of the membranes and physical-chemical parameters of the wastewater, including the concentration of microplastics in the shape of tent fibers (PVC), were calculated before and after filtration. The microfiltration membrane manifested a greater decrease in permeability (95%) compared to the ultrafiltration membrane (37%). The resulting water quality in terms of Total Solids, turbidity, and microplastics concentration was better for the ultrafiltration. This is evident from 99.2% versus 98.55% removal efficiency of microplastics from the laundering wastewater, respectively.

How fast, how far: Diversification and adoption of novel methods in aquatic microplastic monitoring.

Since 2004, there has been a marked diversification in the methods used to determine aquatic microplastic (MP) concentrations. Despite calls for a unified approach to MP sampling, the proliferation of new methods has accelerated in recent years. Both minor method adaptations and entirely novel approaches have been introduced to overcome barriers to reliable MP sampling, extraction and quantification, resulting in a variety of complimentary but also competing approaches. However, there is little clarity regarding the extent to which new methods are acknowledged and adopted, or of the apparent drivers of, as well as barriers to, said adoption. To explore these issues, the rate of method diversification was examined in a systematic review. The rate and degree of diversification were determined by scoring each method by its "degree of novelty": highly novel methods, secondary adaptations of existing methods and smaller, tertiary adaptations of existing methods. This analysis revealed that the rate of method diversification has been greatest since 2011. Our results indicate limited use of these novel methods and adaptations in the subsequent literature, with many researchers falling back on methods that are well established in the existing literature. Importantly, there is little consistency in the units used when reporting MP concentrations. However, these differences are seldom driven by method selection and are rather the result of discrepancies between researchers. Thus, in understanding the requirements of comparability and consistent reporting for monitoring purposes, we can apply a diverse approach to sampling whilst maintaining the applicability and usefulness of the resulting data.

Accelerated Weathering Increases the Release of Toxic Leachates from Microplastic Particles as Demonstrated through Altered Toxicity to the Green Algae Raphidocelis subcapitata.

Studies that evaluate the impact of microplastic particles (MPs) often apply particles of pristine material. However, MPs are affected by various abiotic and biotic processes in the environment that possibly modify their physical and chemical characteristics, which might then result in their altered toxic effect. This study evaluated the consequence of weathering on the release of toxic leachates from microplastics. MPs derived from six marine antifouling paints, end-of-life tires, and unplasticised PVC were exposed to UV-C radiation to simulate weathering. Non-weathered and weathered MPs were leached in algae growth medium for 72 h to demonstrate additive release under freshwater conditions. The model organism, green algae Raphidocelis subcapitata, was exposed to the resulting leachates of both non-weathered and weathered MPs. The results of the growth inhibition tests showed that the leachates of weathered microparticles were more toxic than of the non-weathered material, which was reflected in their lower median effect concentration (EC50) values. Chemical analysis of the leachates revealed that the concentration of heavy metals was several times higher in the leachates of the weathered MPs compared to the non-weathered ones, which likely contributed to the increased toxicity. Our findings suggest including weathered microplastic particles in exposure studies due to their probably differing impact on biota from MPs of pristine materials.

Quality of nanoplastics and microplastics ecotoxicity studies: Refining quality criteria for nanomaterial studies.

It is becoming increasingly important to develop assessment criteria for the quality of nanoplastics studies. This study is an attempt to establish such criteria based on those developed for engineered nanomaterials, the GUIDEnano and DaNa criteria being two representatives. These criteria were applied to studies on polystyrene nanoparticles (PS NPs), which currently represent the majority of studies on nanoplastics. We compiled a list of existing nanomaterial-related criteria that are not fully relevant to PS NPs and propose additional nanoplastic-specific criteria targeting polymer chemical composition, source, production and field collection, impurities/chemical additives, density, hydrophobicity, colour, and chemical leaching. For each criterion, scientific justification is provided. We conclude that the existing study quality assessments originally developed for nano(eco)toxicity studies can, through refinements, be applied to those dealing with nanoplastics studies, with a further outlook on microplastics. The final quality criteria catalogue presented here is intended as a starting point for further elaborations considering different purposes of an assessment.

A nationwide assessment of plastic pollution in the Danish realm using citizen science.

Plastic pollution is considered one of today's major environmental problems. Current land-based monitoring programs typically rely on beach litter data and seldom include plastic pollution further inland. We initiated a citizen science project known as the Mass Experiment inviting schools throughout The Danish Realm (Denmark, Greenland and the Faeroe Islands) to collect litter samples of and document plastic pollution in 8 different nature types. In total approximately 57,000 students (6-19 years) collected 374,082 plastic items in 94 out of 98 Danish municipalities over three weeks during fall 2019. The Mass Experiment was the first scientific survey of plastic litter to cover an entire country. Here we show how citizen science, conducted by students, can be used to fill important knowledge gaps in plastic pollution research, increase public awareness, establish large scale clean-up activities and subsequently provide information to political decision-makers aiming for a more sustainable future.

Publisher Correction: On the issue of transparency and reproducibility in nanomedicine.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

Publisher Correction: On the issue of transparency and reproducibility in nanomedicine.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

When Fluorescence Is not a Particle: The Tissue Translocation of Microplastics in Daphnia magna Seems an Artifact.

Previous research reported the translocation of nano- and microplastics from the gastrointestinal tract to tissues in Daphnia magna, most prominently of fluorescent polystyrene beads to lipid droplets. For particles >300 nm, such transfer is biologically implausible as the peritrophic membrane retains these in the daphnid gut. We used confocal laser scanning microscopy to study tissue transfer applying the setup from a previous study (neonates exposed to 20 and 1000 nm polystyrene beads at 2 µg L-1 for 4 and 24 h), the same setup with a fructose-based clearing, and a setup with a 1000-fold higher concentration (2 mg L-1 ). We used passive sampling to investigate whether the beads leach the fluorescent dye. Although the 1000 nm beads were visible in the gut at both exposure concentrations, the 20 nm beads were detectable at 2 mg L-1 only. At this concentration, we observed fluorescence in lipid droplets in daphnids exposed to both particle types. However, this did not colocalize with the 1000 nm beads, which remained visible in the gut. We further confirmed the leaching of the fluorescent dye using a passive sampler, a method that can also be applied in future studies. In summary, we cannot replicate the original study but demonstrate that the fluorescence in the lipid droplets of D. magna results from leaching of the dye. Thus, the use of fluorescence as a surrogate for particles can lead to artifacts in uptake and translocation studies. This highlights the need to confirm the stability of the fluorescence label or to localize particles using alternative methods. Environ Toxicol Chem 2019;38:1495-1503. © 2019 SETAC OPEN PRACTICES: The present study has earned Open Data/Materials badges for making publicly available the digitally shareable data necessary to reproduce the reported results. Learn more about the Open Practices badges from the Center for Open Science: https://osf.io/tvyxz/wiki.

Ingestion and effects of micro- and nanoplastics in blue mussel (Mytilus edulis) larvae.

It is well known that mussels are exposed to microplastics but ingestion and potential effects on mussel larvae are not well understood. We quantified ingestion and egestion of 100 nm and 2 µm polystyrene beads in blue mussel larvae after 4 h exposure and 16 h depuration using different plastic-to-microalgae ratios. Effects on growth and development of mussel larvae were investigated at 0.42, 28.2 and 282 µgL-1 within 15 days of exposure. We found that, on a mass basis, larvae ingested a higher amount of 2 µm than 100 nm beads, while egestion was independent of particle size and the plastics-to-algae ratio. Although particle egestion occurred readily, microplastics remained inside the larvae. Larval growth was not affected but abnormally developed larvae increased after exposure to polystyrene beads. Malformations were more pronounced for 100 nm beads, at higher concentration and after longer exposure time.

Are We Speaking the Same Language? Recommendations for a Definition and Categorization Framework for Plastic Debris.

The accumulation of plastic litter in natural environments is a global issue. Concerns over potential negative impacts on the economy, wildlife, and human health provide strong incentives for improving the sustainable use of plastics. Despite the many voices raised on the issue, we lack a consensus on how to define and categorize plastic debris. This is evident for microplastics, where inconsistent size classes are used and where the materials to be included are under debate. While this is inherent in an emerging research field, an ambiguous terminology results in confusion and miscommunication that may compromise progress in research and mitigation measures. Therefore, we need to be explicit on what exactly we consider plastic debris. Thus, we critically discuss the advantages and disadvantages of a unified terminology, propose a definition and categorization framework, and highlight areas of uncertainty. Going beyond size classes, our framework includes physicochemical properties (polymer composition, solid state, solubility) as defining criteria and size, shape, color, and origin as classifiers for categorization. Acknowledging the rapid evolution of our knowledge on plastic pollution, our framework will promote consensus building within the scientific and regulatory community based on a solid scientific foundation.

The fate of microplastics during uptake and depuration phases in a blue mussel exposure system.

We present a blue mussel exposure system where the fate of microplastics (polystyrene beads) is tracked during exposure and depuration phases. This enabled the establishment of a complete mass balance. Quantification of beads in mussels was done with a novel enzymatic digestion protocol. We found a similar relative distribution of beads for 2 environmentally realistic concentrations (5 and 100 beads L-1 ) and no substantial egestion of particles within 2 h of depuration. Environ Toxicol Chem 2019;38:99-105. © 2018 SETAC.