ABSTRACT
The biocompatibility of biomedical materials is vital to their applicability and functionality. However, modifying surfaces for enhanced biocompatibility using traditional surface treatment techniques is challenging. We employed a mineralizing elastin-like recombinamer (ELR) self-assembling platform to mediate mineralization on Zr-16Nb-xTi (x = 4,16 wt%) alloy surfaces, resulting in the modification of surface morphology and bioactivity while improving the biocompatibility of the material. We modulated the level of nanocrystal organization by adjusting the cross-linker ratio. Nanoindentation tests revealed that the mineralized configuration had nonuniformity with respect to Young's modulus and hardness, with the center areas having higher values (5.626 ± 0.109 GPa and 0.264 ± 0.022 GPa) compared to the edges (4.282 ± 0.327 GPa and 0.143 ± 0.023 GPa). The Scratch test results indicated high bonding strength (2.668 ± 0.117 N) between the mineralized coating and the substrate. Mineralized Zr-16Nb-xTi (x = 4,16 wt%) alloys had higher viability compared to untreated alloys, which exhibited high cell viability (>100 %) after 5 days and high alkaline phosphatase activity after 7 days. Cell proliferation assays indicated that MG 63 cells grew faster on mineralized surfaces than on untreated surfaces. Scanning electron microscopy imaging confirmed that the cells adhered and spread well on mineralized surfaces. Furthermore, hemocompatibility test results revealed that all mineralized samples were non-hemolytic. Our results demonstrate the viability of employing the ELR mineralizing platform to improve alloy biocompatibility.
Subject(s)
Alloys , Elastin , Elastin/chemistry , Biocompatible Materials , Microscopy, Electron, ScanningABSTRACT
Design and fabrication of implants that can perform better than autologous bone grafts remain an unmet challenge for the hard tissue regeneration in craniomaxillofacial applications. Here, we report an integrated approach combining additive manufacturing with supramolecular chemistry to develop acellular mineralizing 3D printed scaffolds for hard tissue regeneration. Our approach relies on an elastin-like recombinamer (ELR) coating designed to trigger and guide the growth of ordered apatite on the surface of 3D printed nylon scaffolds. Three test samples including a) uncoated nylon scaffolds (referred to as "Uncoated"), b) ELR coated scaffolds (referred to as "ELR only"), and c) ELR coated and in vitro mineralized scaffolds (referred to as "Pre-mineralized") were prepared and tested for in vitro and in vivo performance. All test samples supported normal human immortalized mesenchymal stem cell adhesion, growth, and differentiation with enhanced cell proliferation observed in the "Pre-mineralized" samples. Using a rabbit calvarial in vivo model, 'Pre-mineralized' scaffolds also exhibited higher bone ingrowth into scaffold pores and cavities with higher tissue-implant integration. However, the coated scaffolds ("ELR only" and "Pre-mineralized") did not exhibit significantly more new bone formation compared to "Uncoated" scaffolds. Overall, the mineralizing coating offers an opportunity to enhance integration of 3D printed bone implants. However, there is a need to further decipher and tune their immunologic response to develop truly osteoinductive/conductive surfaces.
ABSTRACT
The objective of our present work is to analyze the effect of carbon derived fillers (GO/RGO) on microstructural, mechanical and osteoinductive potential of xylan/chitosan/HAp composite matrix for bone tissue engineering application. The composites were characterized by FTIR, XRD and SEM to evaluate the composition and morphological parameters. Change in microstructural and mechanical properties of scaffold was observed on tuning filler type (GO/RGO) and concentration. Composites with GO and RGO content demonstrated significant mineralization potential with dense apatite growth. A comparative evaluation of cell viability using MG-63 cell line revealed improved cell response in samples incorporated with carbon fillers than their native parent matrix. MTT Assay revealed highest cell viability in composite with 0.75% RGO content. Cell attachment was observed in all the scaffold samples cultured for 72 h. The filler incorporated X/C/HAp matrix demonstrated increase in ALP activity over a period of 7 and 14 days. Synergistic effect of these fillers in enhancing in vitro mineralization tendency and osteogenic differentiation capability make the composites a potential candidate for bone tissue engineering construct.
Subject(s)
Tissue EngineeringABSTRACT
Poly(N-substituted glycine) "peptoids" are an interesting class of peptidomimics that can resist proteolysis and mimic naturally found antimicrobial peptides (AMPs), which exhibit wide spectrum activity against bacteria. This work investigates the possibility of modifying peptoid AMP mimics (AMPMs) with aliphatic lipid "tails" to generate "lipopeptoids" that can assemble into micellar nanostructures, and evaluates their antimicrobial activities. Two families of AMPMs with different distributions of hydrophobic and cationic residues were employed-one with a uniform repeating amphiphilicity, the other with a surfactant-like head-to-tail amphiphilicity. To further evaluate the interplay between self-assembly and activity, the lipopeptoids were variously modified at the AMPM chain ends with a diethylene glycol (EG2) and/or a cationic group (Nlys-Nlys dipeptoid) to adjust amphiphilicity and chain flexibility. Self-assembly was investigated by critical aggregation concentration (CAC) fluorescence assays and dynamic light scattering (DLS). The structure of a key species was also verified by small-angle X-ray scattering (SAXS) and cryo-electron microscopy (cryo-EM). To screen for antibacterial properties, we measured the minimum inhibitory concentrations (MIC) against S. aureus, E. coli, and P. aeruginosa. We found that certain combinations of lipid tail and AMPM sequences exhibit increased antibacterial activity (i.e., decreased MICs). Perhaps counter-intuitively, we were particularly interested in increased MICs in combination with low CACs. Concealing antimicrobial interactions due to packing of AMPMs in nano-assemblies could pave the way to AMPMs that may be "inert" even if unintentionally released and prevent microbes from gaining resistance to the lipopeptoids. Overall, incorporation of EG2 significantly improved lipopeptoids packing while the hydrophobic tail length was found to have a major influence over the MIC. One particular sequence, which we named C15-EG2-(kss)4, exhibited a very low CAC of 34 µM (0.0075 wt.%) and a significantly increased MIC above values for the unmodified AMPM. With the sequence design trends uncovered from this study, future work will focus on discovering more species such as C15-EG2-(kss)4 and on investigating release mechanisms and the potency of the released lipopeptoids.
ABSTRACT
Peptoids are biofunctional N-substituted glycine peptidomimics. Their self-assembly is of fundamental interest because they demonstrate alternatives to conventional peptide structures based on backbone chirality and beta-sheet hydrogen bonding. The search for self-assembling, water-soluble "minimal" sequences, be they peptide or peptidomimic, is a further challenge. Such sequences are highly desired for their compatibility with biomacromolecules and convenient synthesis for broader application. We report the self-assembly of a set of trimeric, water-soluble α-peptoids that exhibit a relatively low critical aggregation concentration (CAC â¼ 0.3 wt %). Cryo-EM and angle-resolved DLS show different sequence-dependent morphologies, namely uniform ca. 6 nm wide nanofibers, sheets, and clusters of globular assemblies. Absorbance and fluorescence spectroscopies indicate unique phenyl environments for π-interactions in the highly ordered nanofibers. Assembly of our peptoids takes place when the sequences are fully ionized, representing a departure from superficially similar amyloid-type hydrogen-bonded peptide nanostructures and expanding the horizons of assembly for sequence-specific bio- and biomimetic macromolecules.
ABSTRACT
Biological waste from marine sources is discarded into various water bodies which leads to dramatic increase in the water pollution near coastal areas. This animal waste consists of bioactive compounds such as fatty acids, amino acids, and chitin which can be used in agricultural and pharmaceutical sectors. The aim of the current study was to extract chitosan (CS) from the discarded shells of Carinosquilla multicarinata and prepare anti-inflammatory drug diclofenac potassium (DP) encapsulated chitosan nanoparticles (DP-CSNPs). The CS was extracted, purified and physicochemical and morphological properties were characterized such as viscosity (1.44cPs), molecular weight (~57 kDa), degree of deacetylation (83%). The DP-CSNPs were prepared by ionic gelation of extracted chitosan with tripolyphosphate (TPP) anions by varying chitosan, TPP, and drug concentrations. SEM imaging showed that DP-CSNPs were nano-sized (248 nm) along with small, spherical, and uniformity in shape. The endothermic peak appeared at 180°C while performing the thermal analysis of DP-CSNPs by differential scanning calorimetry (DSC). The Loading capacity (LC) and encapsulation efficiency (EE) were determined for all combinations while maximum EE (79.42%), LC (42.08%), and +0.00459 mV for Zeta potential were found for nanoparticles synthesized from CS with 2.5mg/mL concentration and 1mg/mL of TPP and drug concentrations. Moreover, in vitro drug release study was performed at simulated biological fluid (pH 7.4) and at 10th hr maximum (80%) of the drug was released from DP-CSNPs. Therefore, this waste source would be a better model system for the drug release. Implications: Dumping of marine waste into deep ocean has led to dramatic increase in water pollution leading to the endangerment of various oceanic animals. This discarded waste can be used sustainably for the isolation of various biopolymers into the ultimate use for human community. The work provides a detailed guide into the method of extraction of low molecular weight chitosan and preparation of nanoparticles for the delivery of anti-inflammatory drug diclofenac.
Subject(s)
Animal Shells , Anti-Inflammatory Agents, Non-Steroidal/chemistry , Chitosan/chemistry , Crustacea , Diclofenac/chemistry , Drug Carriers/chemistry , Nanoparticles/chemistry , Animals , Drug Liberation , Polyphosphates/chemistryABSTRACT
Microbial surface attachment negatively impacts a wide range of devices from water purification membranes to biomedical implants. Mimics of antimicrobial peptides (AMPs) constituted from poly(N-substituted glycine) "peptoids" are of great interest as they resist proteolysis and can inhibit a wide spectrum of microbes. We investigate how terminal modification of a peptoid AMP-mimic and its surface immobilization affect antimicrobial activity. We also demonstrate a convenient surface modification strategy for enabling alkyne-azide "click" coupling on amino-functionalized surfaces. Our results verified that the N- and C-terminal peptoid structures are not required for antimicrobial activity. Moreover, our peptoid immobilization density and choice of PEG tether resulted in a "volumetric" spatial separation between AMPs that, compared to past studies, enabled the highest AMP surface activity relative to bacterial attachment. Our analysis suggests the importance of spatial flexibility for membrane activity and that AMP separation may be a controlling parameter for optimizing surface anti-biofouling.
Subject(s)
Anti-Bacterial Agents/chemistry , Antimicrobial Cationic Peptides/chemistry , Bacteria/drug effects , Peptoids/chemistry , Anti-Bacterial Agents/pharmacology , BiofoulingABSTRACT
[This corrects the article DOI: 10.1021/acsmacrolett.9b01010.].
ABSTRACT
An aromatic peptoid analogue of the diphenylalanine dipeptide self-assembles in aqueous solution and the first crystal structure was obtained for this class of compound. This reveals molecular packing stabilized by networks of hydrogen bonds. Free-floating nanosheet lamellar structures are observed in solution, which form via cooperative intermolecular interactions driven by π stacking.
ABSTRACT
The use of gadolinium orthoferrite for biomedical application like as contrast agents for magnetic resonance imaging (MRI) has been found to be very promising due to its fascinating properties. The present study focuses on the determination of the effect of the gadolinium concentration in the formation biphasic α-Fe2O3-GdFeO3 for hyperthermia applications. An in-situ sol-gel technique was adopted for the synthesis of biphasic orthoferrites with four different gadolinium concentrations. The XRD analysis confirmed the formation of gadolinium orthoferrites after heat treatment at 1000⯰C, 1100⯰C, and 1200⯰C. The presence of α-Fe2O3 in trace amounts was observed in the materials with low gadolinium concentrations. VSM (Vibrating-sample magnetometer) analysis was performed to ensure the magnetic properties of the materials, which were found to be weakly ferromagnetic. The biocompatibility of the materials was investigated through MTT assay and no cytotoxic effect was observed. The assessment of heating ability of the materials was performed under an alternating magnetic field using an induction heating instrument and all the samples showed temperature rise in the range of hyperthermia temperature with a maximum temperature of 55.71⯰C in 6â¯min. The heating experiments at 44⯰C in the absence of samples established the vulnerability of cancer cells as compared to normal cells.
Subject(s)
Ferric Compounds/chemistry , Gadolinium/chemistry , Hyperthermia, Induced/methods , Magnetic Fields , Magnetic Resonance ImagingABSTRACT
BACKGROUND & OBJECTIVE: Over the last two decades, Alzheimer disease (AD) associated research has accomplished an overwhelming momentum, as it is one of the major current healthcare issues in the developed world. AD is characterized by the presence of Aß mediated extracellular amyloid fibrils and tau-mediated intracellular neurofibrillar tangles and reports have highlighted their subsequent effects on neuronal synaptic activity, antioxidant response and recently explored mitochondrial dysfunction. Additionally, recent reports have demonstrated the mitochondrial dysfunction and associated physiological as well as cellular alterations triggered by fibrillar structures inside the brain tissue. Accumulated evidence indicated that mitochondrial dysfunction also plays a detrimental role in AD pathogenesis and reduction in mitochondrial dysfunction may provide an additional beneficial effect in AD patients. Currently available drugs are ineffective in disease progression and more symptomatic while mechanism oriented drug explorations have been intensively investigated. Therefore, search for effective therapeutic approaches in Alzheimer disease has directed the ongoing research more towards specific biomarker selection, physicochemical properties of drugs and its subsequent interaction with target molecules. CONCLUSION: In present review, we have comprised an overview of the therapeutic advancement in Alzheimer disease with a prevalent hypothesis and current ongoing putative therapeutic approaches to provide recent insights in AD pathogenesis.
Subject(s)
Alzheimer Disease/complications , Alzheimer Disease/drug therapy , Amyloid beta-Peptides/metabolism , Antipsychotic Agents/therapeutic use , Mitochondrial Diseases/etiology , Amyloid beta-Peptides/genetics , Amyloid beta-Protein Precursor/genetics , Amyloid beta-Protein Precursor/metabolism , Animals , Antipsychotic Agents/pharmacology , HumansABSTRACT
Physicochemical interactions of proteins with surfaces mediate the interactions between the implant and the biological system. Surface chemistry of the implant is crucial as it regulates the events at the interface. The objective of this study was to explore the performance of modified surfaces for such interactions relevant to various biomedical applications. Because of a wide range of surface wettability, we aimed to study protein behavior (i.e., conformational changes and their packing) during competitive protein adsorption. Three serum proteins (bovine serum albumin, BSA; fibrinogen, FB; and immunoglobulin G, IgG) were tested for their conformational changes and orientation upon adsorption on hydrophilic (COOH and amine), moderately hydrophobic (mixed and hybrid), and hydrophobic (octyl) surfaces generated via silanization. Modified surfaces were characterized using Fourier-transform infrared spectroscopy, contact angle, and atomic force microscopy (AFM) techniques. Adsorbed masses of proteins from single and binary protein solutions on different surfaces were quantified along with their secondary structure analyses. Maximum adsorbed protein masses were found to be on negatively charged and hydrophobic (octyl) surfaces because of ionic and hydrophobic interactions between protein molecules and surfaces, respectively. Side-on and end-on orientations of adsorbed protein molecules were analyzed using theoretical and AFM analyses. We observed compact and elongated forms of BSA molecules on hydrophilic and hydrophobic surfaces, respectively. We further found a linear increase in the α-helix content of BSA and ß-sheet contents of FB and IgG proteins with the increasing side-on (%)-oriented protein molecules on the surfaces. This indicates that side-on orientations of adsorbed FB and IgG lead to the formation of ß-sheets. Sodium dodecyl sulfate polyacrylamide gel electrophoresis was employed to quantify the protein types and their ratio in competitively adsorbed proteins on different surfaces. A theoretical analysis was also used to determine the % secondary structures of competitively adsorbed proteins from BSA/FB and BSA/IgG solutions, which very well agreed with experimental results. The competitive protein adsorption from both BSA/FB and BSA/IgG solutions was found to be entropy-driven, as revealed by thermodynamic studies performed using isothermal titration calorimetry.
Subject(s)
Blood Proteins/chemistry , Adsorption , Hydrophobic and Hydrophilic Interactions , Microscopy, Atomic Force , Protein Structure, Secondary , Surface PropertiesABSTRACT
A nano-biosorbent for the removal of methylene blue (MB) was prepared by encapsulating iron oxide nanoparticles (NPs) and Agrobacterium fabrum strain SLAJ731, in calcium alginate. The prepared biosorbent was optimized for the maximum adsorption capacity at pH 11, 160 rpm, and 25 °C. Adsorption kinetics was examined using pseudo-first-order, pseudo-second-order, and intra-particle diffusion (IPD) models. The kinetic data agreed to pseudo-second-order model indicating chemisorption of MB, which was also explained by FTIR analysis. The adsorption rate constant (k2) decreased and initial adsorption rate (h, mg g-1 min-1) increased, with an increase in initial dye concentration. The dye adsorption process included both IPD and surface adsorption, where IPD was found to be a rate-limiting step after 60 min of adsorption. The adsorption capacity was found to be 91 mg g-1 at 200 mg L-1 dye concentration. Adsorption data fitted well to Freundlich isotherm; however, it did not fit to Langmuir isotherm, indicating adsorbent surfaces were not completely saturated (monolayer formed) up to the concentration of 200 mg L-1 of MB. Thermodynamic studies proposed that the adsorption process was spontaneous and exothermic in nature. Biosorbent showed no significant decrease in adsorption capacity even after four consecutive cycles. The present study demonstrated dead biomass along with NPs as a potential biosorbent for the treatment of toxic industrial effluents.
Subject(s)
Agrobacterium/chemistry , Ferric Compounds/chemistry , Methylene Blue/isolation & purification , Water Pollutants, Chemical/isolation & purification , Water Purification/methods , Adsorption , Alginates , Biomass , Diffusion , Hydrogen-Ion Concentration , Kinetics , Nanoparticles/chemistry , Thermodynamics , WaterABSTRACT
Remediation of heavy metal-contaminated soils has been drawing our attention toward it for quite some time now and a need for developing new methods toward reclamation has come up as the need of the hour. Conventional methods of heavy metal-contaminated soil remediation have been in use for decades and have shown great results, but they have their own setbacks. The chemical and physical techniques when used singularly generally generate by-products (toxic sludge or pollutants) and are not cost-effective, while the biological process is very slow and time-consuming. Hence to overcome them, an amalgamation of two or more techniques is being used. In view of the facts, new methods of biosorption, nanoremediation as well as microbial fuel cell techniques have been developed, which utilize the metabolic activities of microorganisms for bioremediation purpose. These are cost-effective and efficient methods of remediation, which are now becoming an integral part of all environmental and bioresource technology. In this contribution, we have highlighted various augmentations in physical, chemical, and biological methods for the remediation of heavy metal-contaminated soils, weighing up their pros and cons. Further, we have discussed the amalgamation of the above techniques such as physiochemical and physiobiological methods with recent literature for the removal of heavy metals from the contaminated soils. These combinations have showed synergetic effects with a many fold increase in removal efficiency of heavy metals along with economic feasibility.
ABSTRACT
Although metallic biomaterials find numerous biomedical applications, their inherent low bioactivity and poor osteointegration had been a great challenge for decades. Surface modification via silanization can serve as an attractive method for improving the aforementioned properties of such substrates. However, its effect on protein adsorption/conformation and subsequent cell adhesion and spreading has rarely been investigated. This work reports the in-depth study of the effect of Ti6Al4V surface functionalization on protein adsorption and cell behavior. We prepared self-assembled monolayers (SAMs) of five different surfaces (amine, octyl, mixed [1:1 ratio of amine:octyl], hybrid, and COOH). Synthesized surfaces were characterized by Fourier transform infrared-attenuated total reflection (FTIR-ATR) spectroscopy, contact angle goniometry, profilometry, and field emission scanning electron microscopy (FESEM). Quantification of adsorbed mass of bovine serum albumin (BSA) and fibronectin (FN) was determined on different surfaces along with secondary structure analysis. The adsorbed amount of BSA was found to increase with an increase in surface hydrophobicity with the maximum adsorption on the octyl surface while the reverse trend was detected for FN adsorption, having the maximum adsorbed mass on the COOH surface. The α-helix content of adsorbed BSA increased on amine and COOH surfaces while it decreased for other surfaces. Whereas increasing ß-turn content of the adsorbed FN with the increase in the surface hydrophobicity was observed. In FN, RGD loops are located in the ß-turn and consequently the increase in Δ adhered cells (%) was predominantly increased with the increasing Δ ß-turn content (%). We found hybrid surfaces to be the most promising surface modifier due to maximum cell adhesion (%) and proliferation, larger nuclei area, and the least cell circularity. Bacterial density increased with the increasing hydrophobicity and was found maximum for the amine surface (θ = 63 ± 1°) which further decreased with the increasing hydrophobicity. Overall, modified surfaces (in particular hybrid surface) showed better protein adsorption and cell adhesion properties as compared to unmodified Ti6Al4V and can be potentially used for tissue engineering applications.
Subject(s)
Biocompatible Materials/chemistry , Cell Adhesion/physiology , Fibronectins/chemistry , Serum Albumin, Bovine/chemistry , Titanium/chemistry , Adsorption , Alloys , Animals , Bacterial Adhesion/physiology , Cattle , Cell Line , Cell Survival/drug effects , Escherichia coli/physiology , Fibroblasts/cytology , Fibroblasts/physiology , Hydrophobic and Hydrophilic Interactions , Mice , Protein Structure, Secondary/drug effects , Staphylococcus aureus/physiology , WettabilityABSTRACT
In the present work, we aimed to synthesize highly efficient nano-composite polymeric scaffolds with controllable pore size and mechanical strength. We prepared nanocomposite (CCNWs-AgNPs) of silver nanoparticles (AgNPs) decorated on carboxylated CNWs (CCNWs) which serves dual functions of providing mechanical strength and antimicrobial activity. Scaffolds containing chitosan (CS) and carboxymethyl cellulose (CMC) with varying percent of nanocomposite were fabricated using freeze drying method. XRD and FESEM analysis of nanocomposite revealed highly crystalline structure with AgNPs (5.2â¯nmâ¯dia) decorated on ~200â¯nm long CCNWs surface. FTIR analysis confirmed the interaction between CCNWs and AgNPs. Incorporation of nanocomposite during scaffolds preparation helped in achieving the desirable 80-90% porosity with pore diameter ranging between 150 and 500⯵m and mechanical strength was also significantly improved matching with the mechanical strength of cancellous bone. The swelling capacity of scaffolds decreased after the incorporation of nanocomposite. In turn, scaffold degradation rate was tuned to support angiogenesis and vascularization. Scaffolds apart from exhibiting excellent antimicrobial activity, also supported MG63 cells adhesion and proliferation. Incorporation of CCNWs also resulted in improved biomineralization for bone growth. Overall, these studies confirmed excellent properties of fabricated scaffolds, making them self-sustained and potential antimicrobial scaffolds (without any loaded drug) to overcome bone related infections like osteomyelitis.
Subject(s)
Carboxymethylcellulose Sodium/chemistry , Chitosan/chemistry , Metal Nanoparticles/chemistry , Tissue Engineering , Biocompatible Materials/chemistry , Biocompatible Materials/therapeutic use , Bone and Bones/drug effects , Carboxymethylcellulose Sodium/therapeutic use , Chitosan/therapeutic use , Humans , Metal Nanoparticles/therapeutic use , Osteoblasts/drug effects , Porosity , Silver/chemistry , Tissue Scaffolds/chemistryABSTRACT
Surface modification plays a vital role in regulating protein adsorption and subsequently cell adhesion. In the present work, we prepared nanoscaled modified surfaces using silanization and characterized them using Fourier-transform infrared spectroscopy (FTIR), water contact angle (WCA), and atomic force microscopy (AFM). Five different (amine, octyl, mixed, hybrid, and COOH) surfaces were prepared based on their functionality and varying wettability and their effect on protein adsorption and initial cell adhesion was investigated. AFM analysis revealed nanoscale roughness on all modified surfaces. Fetal bovine serum (FBS) was used for protein adsorption experiment and effect of FBS was analyzed on initial cell adhesion kinetics (up to 6 h) under three different experimental conditions: (a) with FBS in media, (b) with preadsorbed FBS on surfaces, and (c) incomplete media, i.e., without FBS. Various cell features such as cell morphology/circularity, cell area and nuclei size were also studied for the above stated conditions at different time intervals. The cell adhesion rate as well as cell spread area were highest in the case of surfaces with preadsorbed FBS. We observed higher surface coverage rate by adhering cells on hybrid (rate, 0.073 h-1) and amine (0.072 h-1) surfaces followed by COOH (0.062 h-1) and other surfaces under preadsorbed FBS condition. Surface treated with cells in incomplete media exhibited least adhesion rate, poor cell spreading and improper morphology. Furthermore, we found that initial cell adhesion rate and Δadhered cells (%) linearly increased with the change in α-helix content of adsorbed FBS on surfaces. Among all the modified surfaces and under all three experimental conditions, hybrid surface exhibited excellent properties for supporting cell adhesion and growth and hence can be potentially used as surface modifiers in biomedical applications to design biocompatible surfaces.
ABSTRACT
This study describes the preparation of composite film using chitosan (CS) and polyvinylpyrrolidone (PVP) with incorporated cellulose nanowhiskers (CNWs) for drug delivery application. CNWs were prepared by acid hydrolysis of cellulose with sulfuric acid. Field emission scanning electron microscopy studies revealed nanofibrous morphology of CNWs with 20-30 nm diameter and 200-250 nm in length. X-ray powder diffraction analysis confirmed highly crystalline nature of CNWs with 92.81% crystallinity. Incorporation of CNWs enhanced the thermal and mechanical properties of films. Fourier transform infrared spectroscopy data showed physical interactions between polymer-polymer and polymer-drug. Films prepared with CNWs showed improved swelling behavior which resulted in sustained drug release from polymeric matrix. In vitro curcumin release data were fitted with two-step release model; Step 1 as desorption from the outer surface of the film, and Step 2 as diffusion from within the film and subsequent desorption. The release kinetics confirmed biphasic release profile with different release rates along with diffusion controlled curcumin release. Prepared films showed high biocompatibility with excellent antibacterial activities. Overall, the performed studies confirmed CS-PVP-CNWs based release system can as a potential candidate for wound dressing applications with sustained drug release. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 2391-2404, 2017.
Subject(s)
Cellulose/chemistry , Chitosan/chemistry , Drug Delivery Systems , Nanocomposites/chemistry , Povidone/chemistry , Wound Healing , Adsorption , Animals , Anti-Infective Agents/pharmacology , Bacteria/drug effects , Calorimetry, Differential Scanning , Cell Death/drug effects , Cell Line , Curcumin/administration & dosage , Curcumin/pharmacology , Diffusion , Drug Liberation , Kinetics , Mice , Microbial Sensitivity Tests , Muramidase/metabolism , Nanocomposites/ultrastructure , Spectroscopy, Fourier Transform Infrared , Tensile Strength , Thermogravimetry , Wettability , Wound Healing/drug effects , X-Ray DiffractionABSTRACT
The present study deals with kinetic studies of the chemical modification for synthesizing a hydrophobic silica surface. Surface silanization (modification) via formation of Self-Assembled Monolayer (SAM) using a short chain triethoxyoctylsilane (TEOS) was carried out under inert atmosphere at room temperature. Fourier transmission infrared (FTIR) spectroscopy, water contact angle (WCA) and atomic force microscopy (AFM) were employed to investigate surface modification. FTIR analysis in the range from 900-1200cm(-1) and 2850-3000cm(-1) confirmed surface modification and re-orientation of the attached molecules. Kinetic studies of TEOS SAM formation were fitted by Exponential Association function. Kinetic fitting of FTIR data in the range from 900-1200cm(-1) revealed a very fast attachment of TEOS molecules resulting in total surface coverage within 16min whereas re-orientation rate was slow and continued till 512min. Further, change in orientation from lying-down to standing-up state was supported by contact angle analysis. AFM images initially showed small islands of ~20nm, which in-fill with time indicating formation of a smooth monolayer. Our findings indicate that formation of octyl SAM is fast process and completes within 8.5h in contrary to reported 24h in conventional SAM formation protocols. The kinetic fitting data can be explored to design a nanopatterned surface for a specific application.
Subject(s)
Silanes/chemistry , Silicon Dioxide/chemistry , Surface PropertiesABSTRACT
In recent years, water pollution and pesticide accumulation in the food chain have become a serious environmental and health hazard problem. Direct determination of these contaminants is a difficult task due to their low concentration level and the matrix interferences. Therefore, an efficient separation and preconcentration procedure is often required prior to the analysis. With the advancement in nanotechnology, various types of magnetic core-shell nanoparticles have successfully been synthesized and received considerable attention as sorbents for decontamination of diverse matrices. Magnetic core-shell nanoparticles with surface modifications have the advantages of large surface-area-to-volume ratio, high number of surface active sites, no secondary pollutant, and high magnetic properties. Due to their physicochemical properties, surface-modified magnetic core-shell nanoparticles exhibit high adsorption efficiency, high rate of removal of contaminants, and easy as well as rapid separation of adsorbent from solution via external magnetic field. Such facile separation is essential to improve the operation efficiency. In addition, reuse of nanoparticles would substantially reduce the treatment cost. In this review article, we have attempted to summarize recent studies that address the preconcentration methods of pesticide residue analysis and removal of toxic contaminants from aquatic systems using magnetic core-shell nanoparticles as adsorbents.