Fabrication, Characterization and Application of Biomolecule Micropatterns on Cyclic Olefin Polymer (COP) Surfaces with Adjustable Contrast.

Peptide and protein micropatterns are powerful tools for the investigation of various cellular processes, including protein-protein interactions (PPIs). Within recent years, various approaches for the production of functional surfaces have been developed. Most of these systems use glass as a substrate, which has several drawbacks, including high fragility and costs, especially if implemented for fluorescence microscopy. In addition, conventional fabrication technologies such as microcontact printing (µCP) are frequently used for the transfer of biomolecules to the glass surface. In this case, it is challenging to adjust the biomolecule density. Here, we show that cyclic olefin polymer (COP) foils, with their encouraging properties, including the ease of manufacturing, chemical resistance, biocompatibility, low water absorption, and optical clarity, are a promising alternative to glass substrates for the fabrication of micropatterns. Using a photolithography-based approach, we generated streptavidin/biotinylated antibody patterns on COPs with the possibility of adjusting the pattern contrast by varying plasma activation parameters. Our experimental setup was finally successfully implemented for the analysis of PPIs in the membranes of live cells via total internal reflection fluorescence (TIRF) microscopy.

A Double-Hybridization Approach for the Transcription- and Amplification-Free Detection of Specific mRNA on a Microarray.

A double-hybridization approach was developed for the enzyme-free detection of specific mRNA of a housekeeping gene. Targeted mRNA was immobilized by hybridization to complementary DNA capture probes spotted onto a microarray. A second hybridization step of Cy5-conjugated label DNA to another section of the mRNA enabled specific labeling of the target. Thus, enzymatic artifacts could be avoided by omitting transcription and amplification steps. This manuscript describes the development of capture probe molecules used in the transcription- and amplification-free analysis of RPLP0 mRNA in isolated total RNA. An increase in specific signal was found with increasing length of the target-specific section of capture probes. Unspecific signal comprising spot autofluorescence and unspecific label binding did not correlate with the capture length. An additional spacer between the specific part of the capture probe and the substrate attachment site increased the signal significantly only on a short capture probe of approximately 30 nt length.

A microfluidic multiwell chip for enzyme-free detection of mRNA from few cells.

Isogenic cell populations possess heterogeneous gene expression patterns. Most methods for mRNA expression analysis start with the reverse transcription of mRNA into cDNA, a process that can introduce strong signal variations not related to the actual mRNA levels. Miniaturized lab-on-a-chip systems offer properties - e.g. low sample dilution, low contamination - that enable new reaction schemes for molecular analyses. To enable transcription-free mRNA expression analysis of few single cells, a one-step cell lysis, target labelling and hybridisation approach as well as a corresponding passive multiwell chip with a volume of 25.5 nL/well were developed. The method enabled the parallel analysis of up to 96 samples and 6 target genes per sample. Preceding light microscopy of the living cells allowed correlating mRNA levels and cell number. As a proof-of-principle, the pancreatic cancer cell line Panc-1 was investigated for expression heterogeneity of a reference gene plus 5 genes reported to be overexpressed in cancer stem cells (CSCs). A good correlation (r(51)=0.739, p<0.001; rs(51)=0.744, p<0.001) between the cell number per well and the number of detected reference gene mRNA confirmed the proper function of the device. Moreover, a heterogeneous expression of the CSC-associated target genes was found which matched well with reports on the presence of CSCs in the Panc-1 cell line.

Co-Immobilization of Proteins and DNA Origami Nanoplates to Produce High-Contrast Biomolecular Nanoarrays.

The biofunctionalization of nanopatterned surfaces with DNA origami nanostructures is an important topic in nanobiotechnology. An unexplored challenge is, however, to co-immobilize proteins with DNA origami at pre-determined substrate sites in high contrast relative to the nontarget areas. The immobilization should, in addition, preferably be achieved on a transparent substrate to allow ultrasensitive optical detection. If successful, specific co-binding would be a step towards stoichiometrically defined arrays with few to individual protein molecules per site. Here, we successfully immobilize with high specificity positively charged avidin proteins and negatively charged DNA origami nanoplates on 100 nm-wide carbon nanoislands while suppressing undesired adsorption to surrounding nontarget areas. The arrays on glass slides achieve unprecedented selectivity factors of up to 4000 and allow ultrasensitive fluorescence read-out. The co-immobilization onto the nanoislands leads to layered biomolecular architectures, which are functional because bound DNA origami influences the number of capturing sites on the nanopatches for other proteins. The novel hybrid DNA origami-protein nanoarrays allow the fabrication of versatile research platforms for applications in biosensing, biophysics, and cell biology, and, in addition, represent an important step towards single-molecule protein arrays.

A microfluidic platform for transcription- and amplification-free detection of zepto-mole amounts of nucleic acid molecules.

Here we report the development of a device for the transcription- and amplification-free detection of DNA and RNA molecules down to the zepto-mole range. A microfluidic chip with a built-in microarray was used for manipulation of nano-liter sample volumes. Specific staining and immobilization of the target molecules was achieved via a double hybridization approach thereby avoiding bias due to enzymatic processes like reverse transcription and PCR amplification. Therefore, target molecules were indirectly labeled by pre-hybridization to complementary Cy5-labeled probes. The remaining single-stranded portion of each target molecule could subsequently hybridize to complementary capture probes of a microarray. Thus a target-mediated immobilization of labeled DNA took place. By means of an ultra-sensitive fluorescence readout, all molecules hybridized to the microarray could be detected. The combination of minimized sample volume and single molecule detection yielded a detection limit of 39 fM (831 molecules in 35.4 nl assay volume) for target DNA and 16 fM (338 molecules) for target RNA after 1h on-chip hybridization.

Micro-structured peptide surfaces for the detection of high-affinity peptide-receptor interactions in living cells.

Peptide ligands have great potential as selective agents for diagnostic imaging and therapeutic targeting of human cancers. A number of high-throughput assays for screening potential candidate peptides have been developed. Although these screening assays are indispensable for the identification of peptide ligands at a large scale, it is crucial to validate peptide binding and selectivity for targeted receptors in a live-cell context. For testing high-affinity peptide-receptor interactions in the plasma membrane of living cells, we developed cell-resistant, micro-structured glass surfaces with high-density and high-contrast peptide features. Cell adhesion and recruitment of fluorescent receptors to micro-patterned peptides in the live-cell membrane were evaluated by reflection interference contrast (RIC) and total internal reflection (TIRF) microscopy, respectively. To demonstrate both the specificity and modularity of the assay, co-patterning of fluorescent receptors with three different immobilized micro-structured ligands was shown: first, interaction of green fluorescent protein (GFP)-tagged epidermal growth factor (EGF) receptor expressed in Jurkat cells with immobilized EGF was detected and quantified. Second, using Jurkat cells, we demonstrated specific interaction of yellow fluorescent protein (YFP)-tagged ß3 integrin with c(RGDfK) peptide. Third, we identified indirect recruitment of GFP-tagged α5 integrin to an 11-mer peptide. In summary, our results show that the developed micro-structured surfaces are a useful tool for the validation and quantification of peptide-receptor interactions in their natural cellular environment.

High-throughput, multiparameter analysis of single cells.

Heterogeneity of cell populations in various biological systems has been widely recognized, and the highly heterogeneous nature of cancer cells has been emerging with clinical relevance. Single-cell analysis using a combination of high-throughput and multiparameter approaches is capable of reflecting cell-to-cell variability, and at the same time of unraveling the complexity and interdependence of cellular processes in the individual cells of a heterogeneous population. In this review, analytical methods and microfluidic tools commonly used for high-throughput, multiparameter single-cell analysis of DNA, RNA, and proteins are discussed. Applications and limitations of currently available technologies for cancer research and diagnostics are reviewed in the light of the ultimate goal to establish clinically applicable assays.

Mapping the nucleotide binding site of uncoupling protein 1 using atomic force microscopy.

A tight regulation of proton transport in the inner mitochondrial membrane is crucial for physiological processes such as ATP synthesis, heat production, or regulation of the reactive oxygen species as proposed for the uncoupling protein family members (UCP). Specific regulation of proton transport is thus becoming increasingly important in the therapy of obesity and inflammatory, neurodegenerative, and ischemic diseases. We and other research groups have shown previously that UCP1- and UCP2-mediated proton transport is inhibited by purine nucleotides. Several hypotheses have been proposed to explain the inhibitory effect of ATP, although structural details are still lacking. Moreover, the unresolved mystery is how UCP operates in vivo despite the permanent presence of high (millimolar) concentrations of ATP in mitochondria. Here we use the topographic and recognition (TREC) mode of an atomic force microscope to visualize UCP1 reconstituted into lipid bilayers and to analyze the ATP-protein interaction at a single molecule level. The comparison of recognition patterns obtained with anti-UCP1 antibody and ATP led to the conclusion that the ATP binding site can be accessed from both sides of the membrane. Using cantilever tips with different cross-linker lengths, we determined the location of the nucleotide binding site inside the membrane with 1 Å precision. Together with the recently published NMR structure of a UCP family member (Berardi et al. Nature, 2011, 476, 109-113), our data provide a valuable insight into the mechanism of the nucleotide binding and pave the way for new pharmacological approaches against the diseases mentioned above.

Painting with biomolecules at the nanoscale: biofunctionalization with tunable surface densities.

We present a generic and flexible method to nanopattern biomolecules on surfaces. Carbon-containing nanofeatures are written at variable diameter and spacing by a focused electron beam on a poly(ethylene glycol) (PEG)-coated glass substrate. Proteins physisorb to the nanofeatures with remarkably high contrast factors of more than 1000 compared to the surrounding PEG surfaces. The biological activity of model proteins can be retained as shown by decorating avidin spots with biotinylated DNA, thereby underscoring the universality of the nano-biofunctionalized platform for the binding of other biotinylated ligands. In addition, biomolecule densities can be tuned over several orders of magnitude within the same array, as demonstrated by painting a microscale image with nanoscale pixels. We expect that these unique advantages open up entirely new ways to design biophysical experiments, for instance, on cells that respond to the nanoscale densities of activating molecules.

Probing binding pocket of serotonin transporter by single molecular force spectroscopy on living cells.

The serotonin transporter (SERT) terminates neurotransmission by removing serotonin from the synaptic cleft. In addition, it is the site of action of antidepressants (which block the transporter) and of amphetamines (which induce substrate efflux). The interaction energies involved in binding of such compounds to the transporter are unknown. Here, we used atomic force microscopy (AFM) to probe single molecular interactions between the serotonin transporter and MFZ2-12 (a potent cocaine analog) in living CHOK1 cells. For the AFM measurements, MFZ2-12 was immobilized on AFM tips by using a heterobifunctional cross-linker. By varying the pulling velocity in force distance cycles drug-transporter complexes were ruptured at different force loadings allowing for mapping of the interaction energy landscape. We derived chemical rate constants from these recordings and compared them with those inferred from inhibition of transport and ligand binding: koff values were in good agreement with those derived from uptake experiments; in contrast, the kon values were scaled down when determined by AFM. Our observations generated new insights into the energy landscape of the interaction between SERT and inhibitors. They thus provide a useful framework for molecular dynamics simulations by exploring the range of forces and energies that operate during the binding reaction.

Linking of sensor molecules with amino groups to amino-functionalized AFM tips.

The measuring tip of an atomic force microscope (AFM) can be upgraded to a specific biosensor by attaching one or a few biomolecules to the apex of the tip. The biofunctionalized tip is then used to map cognate target molecules on a sample surface or to study biophysical parameters of interaction with the target molecules. The functionality of tip-bound sensor molecules is greatly enhanced if they are linked via a thin, flexible polymer chain. In a typical scheme of tip functionalization, reactive groups are first generated on the tip surface, a bifunctional cross-linker is then attached with one of its two reactive ends, and finally the probe molecule of interest is coupled to the free end of the cross-linker. Unfortunately, the most popular functional group generated on the tip surface is the amino group, while at the same time, the only useful coupling functions of many biomolecules (such as antibodies) are also NH(2) groups. In the past, various tricks or detours were applied to minimize the undesired bivalent reaction of bifunctional linkers with adjacent NH(2) groups on the tip surface. In the present study, an uncompromising solution to this problem was found with the help of a new cross-linker ("acetal-PEG-NHS") which possesses one activated carboxyl group and one acetal-protected benzaldehyde function. The activated carboxyl ensures rapid unilateral attachment to the amino-functionalized tip, and only then is the terminal acetal group converted into the amino-reactive benzaldehyde function by mild treatment (1% citric acid, 1-10 min) which does not harm the AFM tip. As an exception, AFM tips with magnetic coating become demagnetized in 1% citric acid. This problem was solved by deprotecting the acetal group before coupling the PEG linker to the AFM tip. Bivalent binding of the corresponding linker ("aldehyde-PEG-NHS") to adjacent NH(2) groups on the tip was largely suppressed by high linker concentrations. In this way, magnetic AFM tips could be functionalized with an ethylene diamine derivative of ATP which showed specific interaction with mitochondrial uncoupling protein 1 (UCP1) that had been purified and reconstituted in a mica-supported planar lipid bilayer.

Temporal resolution of protein-protein interactions in the live-cell plasma membrane.

We have recently devised a method to quantify interactions between a membrane protein ("bait") and a fluorophore-labeled protein ("prey") directly in the live-cell plasma membrane (Schwarzenbacher et al. Nature Methods 5:1053-1060 2008). The idea is to seed cells on surfaces containing micro-patterned antibodies against the exoplasmic domain of the bait, and monitor the co-patterning of the fluorescent prey via fluorescence microscopy. Here, we characterized the time course of bait and prey micropattern formation upon seeding the cells onto the micro-biochip. Patterns were formed immediately after contact of the cells with the surface. Cells were able to migrate over the chip surface without affecting the micropattern contrast, which remained constant over hours. On single cells, bait contrast may be subject to fluctuations, indicating that the bait can be released from and recaptured on the micropatterns. We conclude that interaction studies can be performed at any time-point ranging from 5 min to several hours post seeding. Monitoring interactions with time opens up the possibility for new assays, which are briefly sketched in the discussion section.

Detection of protein-protein interactions in the live cell plasma membrane by quantifying prey redistribution upon bait micropatterning.

Our understanding of complex biological systems is based on high-quality proteomics tools for the parallelized detection and quantification of protein interactions. Current screening platforms, however, rely on measuring protein interactions in rather artificial systems, rendering the results difficult to confer on the in vivo situation. We describe here a detailed protocol for the design and the construction of a system to detect and quantify interactions between a fluorophore-labeled protein ("prey") and a membrane protein ("bait") in living cells. Cells are plated on micropatterned surfaces functionalized with antibodies to the bait exoplasmic domain. Bait-prey interactions are assayed via the redistribution of the fluorescent prey. The method is characterized by high sensitivity down to the level of single molecules, the capability to detect weak interactions, and high throughput, making it applicable as a screening tool. The proof-of-concept is demonstrated for the interaction between CD4, a major coreceptor in T-cell signaling, and Lck, a protein tyrosine kinase essential for early T-cell signaling.

Functionalization of probe tips and supports for single-molecule recognition force microscopy.

The measuring tip of a force microscope can be converted into a monomolecular sensorif one or few "ligand" molecules are attached to the apex of the tip while maintainingligand function. Functionalized tips are used to study fine details of receptor-ligand interactionby force spectroscopy or to map cognate "receptor" molecules on the sample surface. Thereceptor (or target) molecules can be present on the surface of a biological specimen; alternatively,soluble target molecules must be immobilized on ultraflat supports. This review describes the methodsof tip functionalization, as well as target molecule immobilization. Silicon nitride tips, siliconchips, and mica have usually been functionalized in three steps: (1) aminofunctionalization,(2) crosslinker attachment, and (3) ligand/receptor coupling, whereby numerous crosslinkersare available to couple widely different ligand molecules. Gold-covered tips and/or supports haveusually been coated with a self-assembled monolayer, on top of which the ligand/receptor moleculehas been coupled either directly or via a crosslinker molecule. Apart from these general strategies,many simplified methods have been used for tip and/or support functionalization, even single-stepmethods such as adsorption or chemisorption being very efficient under suitable circumstances. Allmethods are described with the same explicitness and critical parameters are discussed. In conclusion,this review should help to find suitable methods for specific problems of tip and support functionalization.