Investigation of Erosion/Corrosion Behavior of GRP under Harsh Operating Conditions.

Glass-fiber-reinforced pipe (GRP) is a strong alternative to many other materials, such as cast iron and concrete. It is characterized by high corrosion resistance, resulting in good erosion/corrosion. For the erosion/corrosion test, commercially available GRPs were used, which are frequently utilized for oil field wastewater in harsh environments. This type of GRP material was subjected to simulated conditions replicating in situ or harsh environments. An extensive experiment was conducted. Three quantities of abrasive sand (250 g, 400 g and 500 g with a size of 65 µm) were mixed with 0.015 m3 of water. The abrasive sand samples were taken at a 90 degree angle from the wall of the cylinder tubes. Three flow rate conditions were selected, 0.01 m3/min, 0.0067 m3/min and 0.01 m3/min, with 10 wt.% chlorine. Furthermore, these tests were conducted at five different times: 1 h, 2 h, 3 h, 4 h and 5 h. The results show that the erosion rate increased both with an increasing amount of abrasive sand and with increasing flow rate. The maximum value for the erosion rate was more than three for a flow rate of 0.015 m3 with chlorine for 500 g of sand. The corrosion rate also showed the same trend, with the maximum corrosion rate being reached under the same conditions. It was found that the corrosion rate largely depends on the amount of weight loss, which is an indicator of the erosion effect. Therefore, GFRP provides better erosion/corrosion resistance in a harsh environment or in situ conditions.

Reducing zoonotic avian influenza transmission at household poultry slaughter using a behaviour change tool for limited literacy audiences.

Human infections in Egypt with highly pathogenic avian influenza (HPAI) likely due to airborne transmission of HPAI virus (HPAIV) during home slaughter of poultry predominately affect women and children, who are the primary caregivers of household poultry. This study developed a safe contained poultry slaughter procedure to reduce airborne HPAIV and zoonotic infections and simultaneously created an educational outreach tool for teaching the modified procedure. The tool designed for limited literacy audiences used two illustrated posters and handouts for teaching the safe contained poultry slaughter procedure. The posters were developed with advice of animal health professionals and then refined by target audience women's focus groups. These women's focus groups proved to be the critical step for assuring the understanding, acceptance, effectiveness and accuracy of the outreach tool. The safe contained poultry slaughter procedure was designed to be low or no cost, sustainable by using a universal implement found in village households and designed as a minor variation of standard poultry halal slaughter. It was crafted to be culturally appropriate and religiously acceptable.

A Comparative Study to Evaluate the Essential Work of Fracture to Measure the Fracture Toughness of Quasi-Brittle Material.

In the present work, three different woven composite laminates were fabricated using the hand lay-up method. The woven reinforcement fibres were carbon fibres (CFRP), glass fibres (GFRP-W) and (GFRP-R) in combination with epoxy resin. Then, the central notch specimen tensile test (CNT) was used to measure the fracture toughness and the corresponding surface release energy (GIC). Then, the data were compared with the essential work of fracture (we) values based on the stored energy of the body to obtain a new standard fracture toughness test for composite laminates using relatively simple techniques. In addition to an extended finite element model, XFEM was implemented over a central notch specimen geometry to obtain a satisfactory validation of the essential work of fracture concepts. Therefore, the average values of (GIC) were measured with CNT specimens 25.15 kJ/m2, 32.5 kJ/m2 and 20.22 kJ/m2 for CFRP, GFRP-W and GFRP-R, respectively. The data are very close as the percentage error for the surface release energy measured by the two methods was 0.83, 4.6 and 5.16 for carbon, glass and random fibre composite laminates, respectively. The data for the fracture toughness of XFEM are also very close. The percentage error is 4.6, 5.25 and 2.95 for carbon, glass and random fibre composite laminates, respectively. Therefore, the fundamental work of the fracture concept is highly recommended as a fracture toughness test for composite laminates or quasi-brittle Material.

Phylogenomics of Scorpions Reveal Contemporaneous Diversification of Scorpion Mammalian Predators and Mammal-Active Sodium Channel Toxins.

Scorpions constitute a charismatic lineage of arthropods and comprise more than 2500 described species. Found throughout various tropical and temperate habitats, these predatory arachnids have a long evolutionary history, with a fossil record that began in the Silurian. While all scorpions are venomous, the asymmetrically diverse family Buthidae harbors nearly half the diversity of extant scorpions, and all but one of the 58 species that are medically significant to humans. However, the lack of a densely sampled scorpion phylogeny has hindered broader inferences of the diversification dynamics of scorpion toxins. To redress this gap, we assembled a phylogenomic data set of 100 scorpion venom gland transcriptomes and genomes, emphasizing the sampling of highly toxic buthid genera. To infer divergence times of venom gene families, we applied a phylogenomic node dating approach for the species tree in tandem with phylostratigraphic bracketing to estimate the minimum ages of mammal-specific toxins. Our analyses establish a robustly supported phylogeny of scorpions, particularly with regard to relationships between medically significant taxa. Analysis of venom gene families shows that mammal-active sodium channel toxins (NaTx) have independently evolved in five lineages within Buthidae. Temporal windows of mammal-targeting toxin origins are correlated with the basal diversification of major scorpion mammal predators such as shrews, bats, and rodents. These results suggest an evolutionary model of relatively recent diversification of buthid NaTx homologs in response to the diversification of scorpion predators. [Adaptation; arachnids; phylogenomic dating; phylostratigraphy; venom.].

Possible Protective Potency of Argun Nut (Medemia argun - An Ancient Egyptian Palm) against Hepatocellular Carcinoma in Rats.

IntroductionHepatocellular carcinoma (HCC) is one of the most common cancers worldwide. Medemia argun (MA) fruits have been found to possess proanthocyanidins (PACs), having antioxidant activity. Methods: Intraperitoneal (IP) diethyl nitrosamine (DENA; 200 mg/kg, once) and carbon tetra chloride (CCl4, 3 ml/kg/week, subcutaneously, for 6 weeks) induced HCC in rats. Animals groups: Group I; received vehicle (control). Group II; received MA seed extract, 100 mg/kg (twice/week) for 12 weeks, IP. Group III; received carcinogenic agents only. Group IV; received MA for two weeks before administration of DENA/CCl4 till the end of the experiment. The total period of the experiment was three months. Results: DENA and CCl4 induced HCC, elevated serum alpha-fetoprotein (AFP), liver size, weight, tissue lymphocytic infiltration, nuclear/cytoplasmic ratio, collagen fiber and polysaccharide deposition, cellular proliferation, excessive pro-apoptotic caspase-3 accumulation, disrupted apoptosis. MA prior to DENA/CCl4, significantly protected liver against cancer progression, indicated by serum enzymes, antioxidant markers(glutathione, nitric oxide, and depressed malondialdehyde contents) in the MA-pretreated group, compared to the HCC one, without apparent useful action on superoxide dismutase activity, enhanced apoptosis in liver, through increased casapase-3 expression. The HCC group showed decreased antioxidant defense and BAX/Bcl-2 ratio. Conclusions: This study assumes that MA has a chemo-preventive effect against hepatocarcinogenesis.

Cyclic Relaxation, Impact Properties and Fracture Toughness of Carbon and Glass Fiber Reinforced Composite Laminates.

In this paper, the mechanical properties of fiber-reinforced epoxy laminates are experimentally tested. The relaxation behavior of carbon and glass fiber composite laminates is investigated at room temperature. In addition, the impact strength under drop-weight loading is measured. The hand lay-up technique is used to fabricate composite laminates with woven 8-ply carbon and glass fiber reinforced epoxy. Tensile tests, cyclic relaxation tests and drop weight impacts are carried out on the carbon and glass fiber-reinforced epoxy laminates. The surface release energy GIC and the related fracture toughness KIC are important characteristic properties and are therefore measured experimentally using a standard test on centre-cracked specimens. The results show that carbon fiber-reinforced epoxy laminates with high tensile strength give high cyclic relaxation performance, better than the specimens with glass fiber composite laminates. This is due to the higher strength and stiffness of carbon fiber-reinforced epoxy with 600 MPa compared to glass fiber-reinforced epoxy with 200 MPa. While glass fibers show better impact behavior than carbon fibers at impact energies between 1.9 and 2.7 J, this is due to the large amount of epoxy resin in the case of glass fiber composite laminates, while the impact behavior is different at impact energies between 2.7 and 3.4 J. The fracture toughness KIC is measured to be 192 and 31 MPa √m and the surface energy GIC is measured to be 540.6 and 31.1 kJ/m2 for carbon and glass fiber-reinforced epoxy laminates, respectively.

Novel Bis-Thiazole Derivatives: Synthesis and Potential Cytotoxic Activity Through Apoptosis With Molecular Docking Approaches.

A series of bis-thiazoles 5a-g were synthesized from bis-thiosemicarbazone 3 with hydrazonoyl chlorides 4a-g. Reaction of 3 with two equivalents of α-halocarbonyl compounds 6-8, 10, and 12a-d afforded the corresponding bis-thiazolidines 9, 11, and 13a-d, respectively. Condensation of bis-thiazolidin-4-one 9 with different aromatic aldehydes furnished bis-thiazolidin-4-ones 14a-d. Compounds 5a-g, 9, and 13a,c,d were screened in vitro for their cytotoxic activities in a panel of cancer cell lines. Compounds 5a-c, 5f-g, and 9 exhibited remarkable cytotoxic activities, especially compound 5c with potent IC50 value 0.6 nM (against cervical cancer, Hela cell line) and compound 5f with high IC50 value 6 nM (against ovarian cancer, KF-28 cell line). Compound 5f-induced appreciated apoptotic cell death was measured as 82.76% associated with cell cycle arrest at the G1 phase. The apoptotic pathways activated in KF-28 cells treated with 5a, 5b, and 5f were further investigated. The upregulation of some pro-apoptotic genes, bax and puma, and the downregulation of some anti-apoptotic genes including the Bcl-2 gene were observed, indicating activation of the mitochondrial-dependent apoptosis. Together with the molecular docking studies of compounds 5a and 5b, our data revealed potential Pim-1 kinase inhibition through their high binding affinities indicated by inhibition of phosphorylated C-myc as a downstream target for Pim-1 kinase. Our study introduces a set of bis-thiazoles with potent anti-cancer activities, in vitro.

Temporal Dynamics of Influenza A(H5N1) Subtype before and after the Emergence of H5N8.

Highly pathogenic avian influenza (HPAI) viruses continue to circulate worldwide, causing numerous outbreaks among bird species and severe public health concerns. H5N1 and H5N8 are the two most fundamental HPAI subtypes detected in birds in the last two decades. The two viruses may compete with each other while sharing the same host population and, thus, suppress the spread of one of the viruses. In this study, we performed a statistical analysis to investigate the temporal correlation of the HPAI H5N1 and HPAI H5N8 subtypes using globally reported data in 2015-2020. This was joined with an in-depth analysis using data generated via our national surveillance program in Egypt. A total of 6412 outbreaks were reported worldwide during this period, with 39% (2529) as H5N1 and 61% (3883) as H5N8. In Egypt, 65% of positive cases were found in backyards, while only 12% were found in farms and 23% in live bird markets. Overall, our findings depict a trade-off between the number of positive H5N1 and H5N8 samples around early 2017, which is suggestive of the potential replacement between the two subtypes. Further research is still required to elucidate the underpinning mechanisms of this competitive dynamic. This, in turn, will implicate the design of effective strategies for disease control.

High Temperature Drives Topoisomerase Mediated Chromosomal Break Repair Pathway Choice.

Cancer-causing mutations often arise from inappropriate DNA repair, yet acute exposure to DNA damage is widely used to treat cancer. The challenge remains in how to specifically induce excessive DNA damage in cancer cells while minimizing the undesirable effects of genomic instability in noncancerous cells. One approach is the acute exposure to hyperthermia, which suppresses DNA repair and synergizes with radiotherapy and chemotherapy. An exception, however, is the protective effect of hyperthermia on topoisomerase targeting therapeutics. The molecular explanation for this conundrum remains unclear. Here, we show that hyperthermia suppresses the level of topoisomerase mediated single- and double-strand breaks induced by exposure to topoisomerase poisons. We further uncover that, hyperthermia suppresses hallmarks of genomic instability induced by topoisomerase targeting therapeutics by inhibiting nuclease activities, thereby channeling repair to error-free pathways driven by tyrosyl-DNA phosphodiesterases. These findings provide an explanation for the protective effect of hyperthermia from topoisomerase-induced DNA damage and may help to explain the inverse relationship between cancer incidence and temperature. They also pave the way for the use of controlled heat as a therapeutic adjunct to topoisomerase targeting therapeutics.

Alkali-Treated Titanium Coated with a Polyurethane, Magnesium and Hydroxyapatite Composite for Bone Tissue Engineering.

The aim of this study was to form a functional layer on the surface of titanium (Ti) implants to enhance their bioactivity. Layers of polyurethane (PU), containing hydroxyapatite (HAp) nanoparticles (NPs) and magnesium (Mg) particles, were deposited on alkali-treated Ti surfaces using a cost-effective dip-coating approach. The coatings were assessed in terms of morphology, chemical composition, adhesion strength, interfacial bonding, and thermal properties. Additionally, cell response to the variably coated Ti substrates was investigated using MC3T3-E1 osteoblast-like cells, including assessment of cell adhesion, cell proliferation, and osteogenic activity through an alkaline phosphatase (ALP) assay. The results showed that the incorporation of HAp NPs enhanced the interfacial bonding between the coating and the alkali-treated Ti surface. Furthermore, the presence of Mg and HAp particles enhanced the surface charge properties as well as cell attachment, proliferation, and differentiation. Our results suggest that the deposition of a bioactive composite layer containing Mg and HAp particles on Ti implants may have the potential to induce bone formation.

A Novel and Highly Effective Natural Vibration Modal Analysis to Predict Nominal Strength of Open Hole Glass Fiber Reinforced Polymer Composites Structure.

Glass fiber reinforced polymer (GFRP) composite laminates are considered the key material in many industries such as the infrastructure industries and the aerospace sector, and in building structures due to their superior specific strength and lightweight properties. The prediction of specimens' nominal strength with open holes is still an attractive and questionable field of study. The specimen size effect is referred to its strength degradation due to the presence of holes when specimen geometry gets scaled. The non-destructive test used to measure the nominal strength of such material is a great tool for fast selection purposes, but not secure enough for several purposes. Furthermore, the destructive tests which are more expensive and time-consuming should be avoided in such structures. The present work aims to predict the nominal strength of open-hole GFRP's composite using modal analysis of their natural frequency as non-destructive tests. At this end, the natural frequency, which is measured using modal analysis procedures, is combined with both linear elastic fracture mechanics (LEFM) and the theory of elasticity to predict the nominal strength of open-hole composite laminates. This advanced model employs two parameters of surface release energy resulting from a simple tension test and Young's modulus based on vibration modal analysis. It is well established that these types of materials are also subjected to a size effect in dynamic response. Inversely to the known static loading size effect, the size effect in dynamic response increases with specimen size. The novel model gives excellent and acceptable results when compared with experimental and finite element ones. Size effects curves of a nominal strength of these laminates have a very close relative value with those obtained from finite element and analytical modeling. Moreover, the received design tables and graphs would be highly applicable when selecting suitable materials for similar industrial applications.

Epigenetic modulation of autophagy genes linked to diabetic nephropathy by administration of isorhamnetin in Type 2 diabetes mellitus rats.

Aim: To assess isorhamnetin efficacy for diabetic kidney disease in a Type 2 diabetes mellitus rat model, through investigating its effect at the epigenetic, mRNA and protein levels. Materials & methods: Type 2 diabetes mellitus was induced in rats by streptozotocin and high-fat diet. Rats were treated with isorhamnetin (50 mg/kg/d) for 4 or 8 weeks. Fasting blood glucose, renal and lipid profiles were evaluated. Renal tissues were examined by light and electron microscopy. Autophagy genes (FYCO1, ULK, TECPR1 and WIPI2) and miR-15b, miR-34a and miR-633 were assessed by qRT-PCR, and LC3A/B by immunoblotting. Results: Isorhamnetin improved fasting blood glucose, renal and lipid profiles with increased autophagosomes in renal tissues. It suppressed miRNA regulation of autophagy genes. Conclusion: We propose a molecular mechanism for the isorhamnetin renoprotective effect by modulation of autophagy epigenetic regulators.

Integrative microRNA and gene expression analysis identifies new epigenetically regulated microRNAs mediating taxane resistance in ovarian cancer.

Taxane is a family of front-line chemotherapeutic agents against ovarian cancer (OC). The therapeutic efficacy is frequently counteracted by the development of chemoresistance, leading to high rates of relapse in OC patients. The role(s) of microRNAs (miRNAs) in cancer chemoresistance had been supported by many evidences Epigenetic regulation by miRNAs has been reported to influence cancer development and response to therapeutics, however, their role in OC resistance to paclitaxel (PTX) is unclear. Here, we conducted miRNA profiling in the responsive and PTX-resistant OC cell lines before and after treatment with epigenetic modulators. We reveal 157 miRNAs to be downregulated in the PTX-resistant cells compared to parental controls. The expression of five miRNAs (miRNA-7-5p, -204-3p, -501-5p, -3652 and -4286) was restored after epigenetic modulation, which was further confirmed by qPCR. In silico analysis of the signaling pathways targeted by the selected miRNAs identified the PI3K-AKT pathway as the primary target. Subsequent cDNA array analysis confirmed multiple PI3K-AKT pathway members such as AKT2, PIK3R3, CDKN1A, CCND2 and FGF2 to be upregulated in PTX-resistant cells. STRING analysis showed the deregulated genes in PTX-resistant cells to be primarily involved in cell cycle progression and survival. Thus, high throughput miRNA and cDNA profiling coupled with pathway analysis and data mining provide evidence for epigenetically regulated miRNAs-induced modulation of signaling pathways in PTX resistant OC cells. It paves the way to more in-depth mechanistic studies and new therapeutic strategies to combat chemoresistance.

Urtica dioica extracts abolish scopolamine-induced neuropathies in rats.

Alzheimer's disease (AD) is characterized by alterations in monoamines, oxidative stress, and metabolic dysfunctions. We aim to assess the therapeutic impacts of roots or leaf extract from Urtica dioica (UD; stinging nettle) against scopolamine (SCOP)-induced memory dysfunction, amnesia, and oxidative stress in rats. Spatial memory was assessed by Y maze test. Tissue analyses of norepinephrine (NE), dopamine (DA), serotonin (5-HT), malondialdehyde (MDA), nitric oxide (NO), glutathione (GSH, GSSG), AMP, ADP, and ATP were assessed by HPLC. mRNA levels of Tau and Hsp70 were estimated by PCR. UD extracts particularly nettle root (NR) significantly normalized the SCOP-induced memory deficits even more potent than sermion (SR) and donepezil (DON). Similarly, NR had potent therapeutic impacts on the levels of cortical and hippocampal monoamines e.g. DA, NE, and 5-HT. SCOP induced a dramatic oxidative stress as measured by MDA, NO, and GSSG levels; however, UD extracts showed significant anti-oxidative stress impacts. Additionally, UD extracts restored ATP levels and reduced the levels of AMP and ADP compared to SCOP-treated rats. Furthermore, cortical Tau and hippocampal Hsp70 were modulated by UD extracts particularly NR compared to the SCOP group. In conclusion, UD extracts particularly roots have potential therapeutic impacts against SCOP-induced neuroinflammatory and/or Alzheimer-like phenotype in rats.

Assessment of the Corrosion Behavior of Friction-Stir-Welded Dissimilar Aluminum Alloys.

The fuel consumption of high-density automobiles has increased in recent years. Aluminum (Al) alloy is a suitable material for weight reduction in vehicles with high ductility and low weight. To address environmental problems in aircraft and maritime applications, in particular rust development and corrosion, the current study assesses the corrosion behavior during friction stir welding (FSW) of two dissimilar Al alloys (AA6061 and AA8011) in various corrosive conditions using salt spraying and submersion tests. Two acidic solutions and one alkaline solution are used in these tests, which are performed at room temperature. The two specimens (AA6061 and AA8011) and the weld region are suspended in a salt spraying chamber and a 5 wt.% NaCl solution is continually sprayed using the circulation pump for 60 h, with the specimens being weighed every 15 h to determine the corrosion rates. According to the salt spraying data, the weld zone has a higher corrosion resistance than the core components. For twenty-eight days, individual specimens are submerged in 3.5 wt.% HCl + H2O and H2SO4 + H2O solutions and seawater. The weld area specimens exhibit stronger corrosion resistance than the base material specimens, and weight loss in the saltwater medium is lower when compared to the other test solutions, according to the corrosion analysis. The scanning electron microscope (SEM) analysis demonstrates that the base metal AA8011 is considerably corroded on its surface.

Deep learning model for classification and bioactivity prediction of essential oil-producing plants from Egypt.

Reliance on deep learning techniques has become an important trend in several science domains including biological science, due to its proven efficiency in manipulating big data that are often characterized by their non-linear processes and complicated relationships. In this study, Convolutional Neural Networks (CNN) has been recruited, as one of the deep learning techniques, to be used in classifying and predicting the biological activities of the essential oil-producing plant/s through their chemical compositions. The model is established based on the available chemical composition's information of a set of endemic Egyptian plants and their biological activities. Another type of machine learning algorithms, Multiclass Neural Network (MNN), has been applied on the same Essential Oils (EO) dataset. This aims to fairly evaluate the performance of the proposed CNN model. The recorded accuracy in the testing process for both CNN and MNN is 98.13% and 81.88%, respectively. Finally, the CNN technique has been adopted as a reliable model for classifying and predicting the bioactivities of the Egyptian EO-containing plants. The overall accuracy for the final prediction process is reported as approximately 97%. Hereby, the proposed deep learning model could be utilized as an efficient model in predicting the bioactivities of, at least Egyptian, EOs-producing plants.

Fracture toughness, vibration modal analysis and viscoelastic behavior of Kevlar, glass, and carbon fiber/epoxy composites for dental-post applications.

The use of flexible dental posts concentrates the stress at the dentin and the use of stiff posts increases the stress at the interface. Efforts were directed toward introducing inhomogeneous materials for resolving the disadvantages of both flexible and stiff posts. The main objective of this study was to develop three different fiber/epoxy composite posts. These composites were fabricated using carbon, glass, and Kevlar fibers. Characterization tests were conducted. In the tensile tests, the carbon, glass and Kevlar fiber composites exhibited tensile strengths of 200%, 91%, and 40% of the stainless-steel tensile strength, respectively, and exhibited stiffness values of 62%, 33%, and 12% of the stainless-steel stiffness. The carbon fiber/epoxy composite have a fracture toughness close to that of aluminum alloy. Vibration modal analysis indicated that the frequency response of the carbon fiber composite was lower than those of the glass and Kevlar composites. The highest tensile strength, storage moduli, and stiffness were recorded for the carbon fiber composites and the lowest were for Kevlar fiber composite. The low stiffness and strength of the Kevlar composite are attributed to the fact that Kevlar fibers had lower wettability with epoxy resin than both glass and carbon fibers. Moreover, the Kevlar fiber composite exhibited higher delamination. However, the stiffness and strength of Kevlar made its composite more sensitive than the other composites to free vibrations generated by a simple force induced by a hammer. Based on the results, the carbon fiber/epoxy composite has appropriate characteristics for application in new dental posts.

Field evaluation of common poultry viral vaccinesin Egypt: a need for reassessment of the vaccine value chain.

Egypt has a large traditional and exotic poultry sector which is challenged regularly by poultry diseases in endemic and epidemic proportions. The household poultry in particular is a source of livelihoods and employment for millions of low income citizens. Highly pathogenic avian influenza (HPAI) H5N1 and Newcastle disease are the most important poultry diseases in this sector. Whereas poultry vaccines are available to reduce the incidence of disease in Egypt, their effectiveness is doubtful. We conducted a biological evaluation of selected viral vaccines of poultry in three governorates in Egypt. Fifty­four percent of the vaccines had reduced vaccine titres and the effect of secondary vaccine distributions was associated with the observed vaccine titres. External contamination was observed in some vaccines and break in cold chain was reported. Whereas no vaccine distributor used purpose­built vaccine refrigerator, none also had prescribed protocol for vaccine handling or kept record of vaccine. There is a need to review vaccine handling procedure, monitor of vaccine cold chain more critically and review the whole chain that support vaccine distributions in Egypt.

Isolation of a Novel Reassortant Highly Pathogenic Avian Influenza (H5N2) Virus in Egypt.

Highly pathogenic avian influenza (HPAI) H5N1 and H5N8 have become endemic among domestic poultry in Egypt since 2006 and 2016, respectively. In parallel, the low pathogenic avian influenza H9N2 virus has been endemic since 2010. Despite the continuous circulation of these subtypes for several years, no natural reassortant has been detected so far among the domestic poultry population in Egypt. In this study, the HPAI (H5N2) virus was isolated from a commercial duck farm, giving evidence of the emergence of the first natural reassortment event in domestic poultry in Egypt. The virus was derived as a result of genetic reassortment between avian influenza viruses of H5N8 and H9N2 subtypes circulating in Egypt. The exchange of the neuraminidase segment and high number of acquired mutations might be associated with an alteration in the biological propensities of this virus.

Potential Biological and Climatic Factors That Influence the Incidence and Persistence of Highly Pathogenic H5N1 Avian Influenza Virus in Egypt.

Highly pathogenic H5N1 avian influenza virus (A/H5N1) of clade 2.2.1 is endemic in poultry in Egypt where the highest number of human infections worldwide was reported. During the last 12 years the Egyptian A/H5N1 evolved into several genotypes. In 2007-2014 vaccinated poultry suffered from antigenic drift variants of clade 2.2.1.1 and in 2014/2015 an unprecedented upsurge of A/H5N1 clade 2.2.1.2 occurred in poultry and humans. Factors contributing to the endemicity or re-emergence of A/H5N1 in poultry in Egypt remain unclear. Here, three potential factors were studied: climatic factors (temperature, relative humidity, and wind speed), biological fitness in vitro, and pathogenicity in domestic Pekin and Muscovy ducks. Statistical analyses using negative binomial regression models indicated that ambient temperature in winter months influenced the spread of A/H5N1 in different geographic areas analyzed in this study. In vitro, at 4 and 56°C 2.2.1.1 and recent 2.2.1.2 viruses were more stable than other viruses used in this study. Further, Pekin ducks were more resistant than Muscovy ducks and the viruses were excreted for up to 2 weeks post-infection assuming a strong role as a reservoir. Taken together, ambient temperature in winter months potentially contributes to increasing outbreaks in some regions in Egypt. Heat stability of clade 2.2.1.1 and recent 2.2.1.2 viruses probably favors their persistence at elevated temperatures. Importantly, asymptomatically infected Pekin ducks may play an important role in the spread of avian and human-like A/H5N1 in Egypt. Therefore, control measures including targeted surveillance and culling of silently infected Pekin ducks should be considered.