Photophore-Anchored Molecular Switch for High-Performance Nonvolatile Organic Memory Transistor.

Over the past decade, molecular-switch-embedded memory devices, particularly field-effect transistors (FETs), have gained significant interest. Molecular switches are integrated to regulate the resistance or current levels in FETs. Despite substantial efforts, realizing large memory window with a long retention time, a critical factor in memory device functionality, remains a challenge. This is due to the inability of an isomeric state of a molecular switch to serve as a stable deep trap state within the semiconductor layer. Herein, the study addresses this limitation by introducing chemical bonding between molecular switch and conjugated polymeric semiconductor, facilitating closed isomer of diarylethene (DAE) to operate as a morphologically stable deep trap state. Azide- and diazirine-anchored DAEs are synthesized, which form chemical bonds to the polymer through photocrosslinking, thereby implementing permanent and controllable trapping states nearby conjugated backbone of polymer semiconductor. Consequently, when diazirine-anchored DAE is blended with F8T2 and subjected to photocrosslinking, the resulting organic FETs exhibit remarkable memory performance, including a memory window of 22 V with a retention time over 106 s, a high photoprogrammable on/off ratio over 103, and a high operational stability over 100 photocycles. Further, photophore-anchored DAEs can achieve precise patterning, which enables meticulous control over the semiconductor layer structure.

Visible-Light Communication with Lighting: RGB Wavelength Division Multiplexing OLEDs/OPDs Platform.

A multichannel/multicolor visible light communication (VLC) system using entirely organic components, including organic light emitting diodes (OLEDs) and organic photodiodes (OPDs), is developed to demonstrate indoor lighting applications where the integration of OLEDs and OPDs has significant potential. To achieve this, tricolor (Red/Green/Blue(R/G/B))-selective OPD arrays for the receiver and tricolor OLED arrays for the emitter are developed. For (R/G/B)-selective OPDs, a Fabry-Pérot electrode to enhance color selectivity and a thick junction structure to effectively accommodate a wide range of driving voltages are introduced. For tricolor OLEDs, fluorescent-emitting materials are used to enhance the operating frequency in addition to introducing a cavity structure to achieve narrow emission. Utilizing these spectrally refined tricolor OPDs/OLEDs, a VLC system is designed for indoor lighting applications, and a systematic analysis of their signal-to-interference ratio dependence on the distance or angle between the transmitter and receiver is performed. The study's findings indicate the importance of emission angle-dependent wavelength shift of the OLED and the luminosity function, which varies with wavelength, in the R/G/B mixed-white-light-based VLC systems. Finally, the feasibility of VLC using tricolor OPDs/OLEDs in the real-life context of indoor white-color lighting is demonstrated, showing that the transmitted data patterns well-matched the received data patterns.

Liquid-Film Rupture for Web-like Ag Nanowires toward High-Performance Organic Schottky Barrier Transistors.

Organic vertical transistors are promising device with benefits such as high operation speed, high saturation current density, and low-voltage operation owing to their short channel length. However, a short channel length leads to a high off-current, which is undesirable because it affects the on-off ratio and power consumption. This study presents a breakthrough in the development of high-performance organic Schottky barrier transistors (OSBTs) with a low off-current by utilizing a near-ideal source electrode with a web-like Ag nanowire (AgNW) morphology. This is achieved by employing a humidity- and surface-tension-mediated liquid-film rupture technique, which facilitates the formation of well-connected AgNW networks with large pores between them. Therefore, the gate electric field is effectively transmitted to the semiconductor layer. Also, the minimized surface area of the AgNWs causes complete suppression of the off-current and induces ideal saturation of the OSBT output characteristics. p- and n-type OSBTs exhibit off-currents in the picoampere range with on/off ratios exceeding 106 and 105, respectively. Furthermore, complementary inverters are prepared using an aryl azide cross-linker for patterning, with a gain of >16. This study represents a significant milestone in the development of high-performance organic vertical transistors and verifies their applicability in organic electronic circuitry.

Molecular-Switch-Embedded Solution-Processed Semiconductors.

Recent improvements in the performance of solution-processed semiconductor materials and optoelectronic devices have shifted research interest to the diversification/advancement of their functionality. Embedding a molecular switch capable of transition between two or more metastable isomers by light stimuli is one of the most straightforward and widely accepted methods to potentially realize the multifunctionality of optoelectronic devices. A molecular switch embedded in a semiconductor can effectively control various parameters such as trap-level, dielectric constant, electrical resistance, charge mobility, and charge polarity, which can be utilized in photoprogrammable devices including transistors, memory, and diodes. This review classifies the mechanism of each optoelectronic transition driven by molecular switches regardless of the type of semiconductor material or molecular switch or device. In addition, the basic characteristics of molecular switches and the persisting technical/scientific issues corresponding to each mechanism are discussed to help researchers. Finally, interesting yet infrequently reported applications of molecular switches and their mechanisms are also described.

Azide-functionalized ligand enabling organic-inorganic hybrid dielectric for high-performance solution-processed oxide transistors.

We propose a highly efficient crosslinking strategy for organic-inorganic hybrid dielectric layers using azide-functionalized acetylacetonate, which covalently connect inorganic particles to polymers, enabling highly efficient inter- and intra-crosslinking of organic and inorganic inclusions, resulting in a dense and defect-free thin-film morphology. From the optimized processing conditions, we obtained an excellent dielectric strength of over 4.0 MV cm-1, a high dielectric constant of ~14, and a low surface energy of 38 mN m-1. We demonstrated the fabrication of exceptionally high-performance, hysteresis-free n-type solution-processed oxide transistors comprising an In2O3/ZnO double layer as an active channel with an electron mobility of over 50 cm2 V-1 s-1, on/off ratio of ~107, subthreshold swing of 108 mV dec-1, and high bias-stress stability. From temperature-dependent I-V analyses combined with charge transport mechanism analyses, we demonstrated that the proposed hybrid dielectric layer provides percolation-limited charge transport for the In2O3/ZnO double layer under field-effect conditions.

Covalent Networking of a Conjugated-Polymer Photocatalyst to Promote Exciton Diffusion in the Aqueous Phase for Efficient Hydrogen Production.

A conjugated polymer particle in an aqueous phase is covalently networked in 3D by crosslinking with azide groups, leading to significantly enhanced activity-a high photocatalytic H2 evolution rate (11 024 µmol g-1 h-1 (λ > 420 nm)) and a high apparent quantum yield (up to 0.8%). The reaction between the photoactive azide and the alkyl chains of the conjugated polymer provides more intact intermolecular polymeric interactions in the colloidal state, thus preventing physical swelling and inhibiting the recombination of photoproduced carriers. The covalent network efficiently promotes exciton diffusion, which greatly facilitates charge separation and transfer. The azide photo-crosslinking also leads to more compact and better-packed nanoparticles in the aqueous phase and efficient transfer of excitons to the outer surface of the nanoparticles, where photocatalytic reactions occur. These results show that photo-crosslinking can suppress the adverse effects of alkyl chains which inhibit photocatalytic performance. Therefore, covalent crosslinking is a promising strategy for the development of solar and hydrogen energy.

Topochemical Postulates: Are They Relevant for Topochemical Reactions Occurring at Elevated Temperatures?

A rigid inositol-derived monomer functionalized with azide and alkyne as the complementary reactive groups (CRGs) crystallized as three distinct polymorphs I-III. Despite the unsuitable orientation of CRGs in the crystals for complete polymerization, all the three polymorphs underwent regiospecific and quantitative topochemical azide-alkyne cycloaddition (TAAC) polymerization upon heating to yield three different polymorphs of 1,2,3-triazol-1,4-diyl-linked-poly-neo-inositol. The molecules in these polymorphs exploit the weak intermolecular interactions, free space in the crystal lattice, and heat energy for their large and cooperative molecular motion to attain a transient reactive orientation, ultimately leading to the regiospecific TAAC reaction yielding distinct crystalline polymers. This study cautions that the overreliance on topochemical postulates for the prediction of topochemical reactivity at high temperatures could be misleading.

A Molecular-Switch-Embedded Organic Photodiode for Capturing Images against Strong Backlight.

When the intensity of the incident light increases, the photocurrents of organic photodiodes (OPDs) exhibit relatively early saturation, due to which OPDs cannot easily detect objects against strong backlights, such as sunlight. In this study, this problem is addressed by introducing a light-intensity-dependent transition of the operation mode, such that the operation mode of the OPD autonomously changes to overcome early photocurrent saturation as the incident light intensity passes the threshold intensity. The photoactive layer is doped with a strategically designed and synthesized molecular switch, 1,2-bis-(2-methyl-5-(4-cyanobiphenyl)-3-thienyl)tetrafluorobenzene (DAB). The proposed OPD exhibits a typical OPD performance with an external quantum efficiency (EQE) of <100% and a photomultiplication behavior with an EQE of >100% under low-intensity and high-intensity light illuminations, respectively, thereby resulting in an extension of the photoresponse linearity to a light intensity of 434 mW cm-2 . This unique and reversible transition of the operation mode can be explained by the unbalanced quantum yield of photocyclization/photocycloreversion of the molecular switch. The details of the operation mechanism are discussed in conjunction with various photophysical analyses. Furthermore, they establish a prototype image sensor with an array of molecular-switch-embedded OPD pixels to demonstrate their extremely high sensitivity against strong light illumination.

Sublimation-doping with super bases for high-performance solution-processed heterojunction oxide thin film transistors.

We elucidate how non-destructive sublimation-doping of In2O3/ZnO heterojunctions with various amidine-based organic dopants affects the degree of band bending of the heterojunction and thus the overall performance of solution-processed heterojunction oxide thin-film transistors (TFTs). Ultraviolet photoelectron spectroscopy and X-ray photoelectron spectroscopy analyses show that the stronger the basicity of the dopant, the smaller the EC - EF of ZnO that can be induced within a short doping time, resulting in a high electron mobility due to the increased electron density of the In2O3 layer at the vicinity of the heterointerface. Mott-Schottky analysis combined with secondary ion mass spectroscopy shows the preferential modification of EC - EF selectively for the ZnO layer. The use of a super base with the highest basicity exhibits a high electron mobility of 17.8 cm2 V-1 s-1 for the SiO2 and 37.8 cm2 V-1 s-1 on average (46.6 cm2 V-1 s-1 maximum) for the ZrO2 dielectric layers and enhanced operational bias-stress stability via sublimation-doping for 6 min, which can be attributed to the trap-filled, percolation-limited charge transport behavior. Reproducibility tests are conducted for more than 50 independently fabricated TFTs using the optimized doping technique, and electron mobility distributions with deviations <±10% are demonstrated. This study shows that sublimation doping with super bases can be a good solution for high mobility oxide TFTs with stability and reliability.

Synergetic contribution of fluorinated azide for high EQE and operational stability of top-illuminated, semitransparent, photomultiplication-type organic photodiodes.

In this study, it is shown that fluorinated azide, employed as a functional additive to photomultiplication-type organic photodiodes (PM-OPDs), can not only enhance the operational stability by freezing the morphology consisting of matrix polymer/localized acceptor but also stabilize the trapped electron states such that the photomultiplication mechanism can be accelerated further, leading to exceptionally high external quantum efficiency (EQE). The consequent semitransparent OPD consisting of molybdenum oxide (MoO3)/Au/MoO3/photoactive layer/polyethyleneimine ethoxylated/indium tin oxide (ITO) rendered a maximum EQE of over 500 000% and 370 000% under bottom and top illumination, respectively. Owing to the remarkably high EQE, high specific detectivity of 5.6 × 1013 Jones and low noise-equivalent power of 5.35 × 10-15 W Hz-0.5 were also demonstrated. Furthermore, the OPD demonstrated stable performance during 20 h of continuous operation and minimal performance degradation even after the damp heat test. To fully visualize the advantages of the proposed high-EQE, top-illuminated, semitransparent OPD with spectral asymmetry between absorption and detection, a reflection-type fingerprint platform consisting of 1 OPD-1 oxide field-effect transistor complementary metal-oxide-semiconductor backplane (300 ppi) is designed and fabricated. The successful recognition of the fingerprint of one of the authors is demonstrated, which indicates the feasibility of the proposed PM-OPD for sensing weak light intensity.

Surfactant-Induced Solubility Control To Realize Water-Processed High-Precision Patterning of Polymeric Semiconductors for Full Color Organic Image Sensor.

A fully water-based patterning method for polymer semiconductors was developed and utilized to realize high-precision lateral patterning of various polymers. Water-borne polymer colloids, wherein hydrophobic polymers are dispersed in water with the assistance of surfactant molecules, possess a hydrophilic surface when printed onto a substrate. When this surface is exposed to a washing molecule, the surface of the polymer film recovers its original hydrophobic nature. Such surfactant-induced solubility control (SISC) enables environmentally benign, water-processed, and high-precision patterning of various polymer semiconductors with totally different solubilities, so that fully water-processed polymer organic image sensors (OISs) can be realized. B-/G-/R-selective photodiodes with a pixel size of 100 µm × 100 µm were fabricated and patterned by this water-based SISC method, leading to not only high average specific detectivity values (over 1012 Jones) but also narrow pixel-to-pixel deviation. Thanks to the superiority of the SISC method, we demonstrate the image capturing ability of OISs without B-/G-/R-color filters, from a fully water-based fabrication process.

Synthesis of a photo-responsive single-walled nanoscroll and its photo-reactivity in a nano-layered microenvironment.

A photo-responsive nanoscroll composed of niobate nanosheets and a polyfluoroalkyl azobenzene derivative (C3F-Azo-C6H) is one of the most interesting layered materials because the reversible winding and unwinding motion could be efficiently induced by photo-irradiations. Previously, we have studied a double-walled nanoscroll (DWNS) of niobate that could be synthesized by the intercalation of a cationic polyfluorinated surfactant only into the interlayer I of the layered niobate among the two interlayers, I and II. In this study, we have successfully synthesized another novel photo-responsive single-walled nanoscroll (SWNS) of niobate by a stepwise guest-guest ion-exchange method. All niobate nanosheets that were exfoliated at both interlayers I and II were efficiently converted to nanoscrolls by the intercalation of C3F-Azo-C6H. The synthetic yield has been quantitatively estimated. Though the photo-isomerization reaction of C3F-Azo-C6H was induced in the SWNS, its photo-reactivity was the lowest when compared with those of the nanosheet-stacked film and the DWNS. The photo-reactivity of C3F-Azo-C6H decreased in the order of DWNS > nanosheet-stacked film > SWNS. The different flexibility of the layered miroenvironment might influence the photo-reactivity of C3F-Azo-C6H in the niobate hybrid. The SWNS exhibited a reversible expansion and shrinkage of its interlayer spaces upon photo-irradiation, while the winding and unwinding motion was not observed, contrary to the DWNS. The direction of the expansion and shrinkage of the interlayer of the SWNS was opposite to those of the nanosheet-stacked film and the DWNS. Based on the experimental results, the tilt angle of C3F-Azo-C6H against the nanosheet surface and the matching structures of the top and bottom surfaces of the nanosheet could be the probable key factors that control the photo-reactivity of C3F-Azo-C6H in the layered microenvironment; the morphological changes of the nano hybrids was also discussed.

Molecular Engineering of a Donor-Acceptor Polymer To Realize Single Band Absorption toward a Red-Selective Thin-Film Organic Photodiode.

Herein, we explore the strategy of realizing a red-selective thin-film organic photodiode (OPD) by synthesizing a new copolymer with a highly selective red-absorption feature. PCZ-Th-DPP, with phenanthrocarbazole (PCZ) and diketopyrrolopyrrole (DPP) as donor and acceptor units, respectively, was strategically designed/synthesized based on a time-dependent density functional theory calculation, which predicted the significant suppression of the band II absorption of PCZ-Th-DPP due to the extremely efficient intramolecular charge transfer. We demonstrate that the synthesized PCZ-Th-DPP exhibits not only a high absorption coefficient within the red-selective band I region, as theoretically predicted, but also a preferential face-on intermolecular structure in the thin-film state, which is beneficial for vertical charge extraction as an outcome of a glancing incidence X-ray diffraction study. By employing PCZ-Th-DPP as a photoactive layer of Schottky OPD, to fully match its absorption characteristic to the spectral response of the red-selective OPD, we demonstrate a genuine red-selective specific detectivity in the order of 1012 Jones while maintaining a thin active layer thickness of ∼300 nm. This work demonstrates the possibility of realizing a full color image sensor with a synthetic approach to the constituting active layers without optical manipulation.

Polyvinyl alcohol covalently grafted CNT for free-standing, flexible, and high-performance thermoelectric generator film.

We introduce a strategic approach to synthesize covalntly cross-linked carbon nanotube (CNT)-polymer nanocomposites, which can be applied as a free-standing and flexible organic thermoelectric generator film. Esterification of polyvinyl alcohol (PVA) to render PVA-COOH followed by an amide reaction with single-walled CNTs (SWCNTs) functionalized with amino groups (SWCNT-NH2) yielded a covalently grafted PVA/SWCNT composite film with an excellent dispersion of SWCNTs within the polymer matrix as confirmed using Fourier-transform infrared spectroscopy and scanning electron microscopy. This amide reaction could be further optimized with the addition of a small amount of Triton™ X-100, which resulted in a better dispersion of SWCNT prior to the amide condensation reaction. Consequently, a covalently cross-linked PVA/SWCNT composite film showed better Seebeck coefficients than those of previously reported non-covalently, physically wrapped polymer/CNT composite films, resulting in a high power factor up to 275 µW m-1 K-2. Furthermore, a covalent amide-linking between PVA and SWCNT yielded a free-standing film (30 × 30 mm) with excellent flexibility and notable shelf stability as confirmed by negligible changes in thermoelectric parameters after bending test for 10 000 times with a bending radius of 2 mm and also shelf stability test in ambient condition without any passivation layer for 30 d.

Regioselective SN2 reactions for rapid syntheses of azido-inositols by one-pot sequence-specific nucleophilysis.

Triflates of myo-inositol undergo facile solvolysis in DMSO and DMF yielding SN2 products substituted with O-nucleophiles; DMF showed slower kinetics. Axial O-triflate undergoes faster substitution than equatorial O-triflate. By exploiting this difference in kinetics, solvent-tuning and sequence-controlled nucleophilysis, rapid synthesis of three azido-inositols of myo-configuration from myo-inositol itself has been achieved.

Photo-induced morphological winding and unwinding motion of nanoscrolls composed of niobate nanosheets with a polyfluoroalkyl azobenzene derivative.

Photo-responsive nanoscrolls can be successfully fabricated by mixing a polyfluoroalkyl azobenzene derivative and a niobate nanosheet, which is exfoliated from potassium hexaniobate. In this study, we have found that the photo-responsive nanoscroll shows a morphological motion of winding and unwinding, which is basically due to the nanosheet sliding within the nanoscroll, by efficient photo-isomerization reactions of the intercalated azobenzene in addition to the interlayer distance change of the nanoscrolls. The relative nanosheet sliding of the nanoscroll is estimated to be ca. 280 nm from the AFM morphology analysis. The distance of the sliding motion is over 20 times that of the averaged nanosheet sliding in the azobenzene/niobate hybrid film reported previously. Photo-responsive nanoscrolls can be expected to be novel photo-activated actuators and artificial muscle model materials.

Synthesis of double-wall nanoscrolls intercalated with polyfluorinated cationic surfactant into layered niobate and their magnetic alignment.

The orientation of nanomaterials with an anisotropic nature such as nanoscrolls is very important for realizing their efficient and sophisticated functions in devices, including nanostructured electrodes in artificial photosynthetic cells. In this study, we successfully synthesized a nanoscroll by intercalation of a cationic polyfluorinated surfactant into the interlayer spaces of layered niobate and successfully controlled its orientation by applying an external magnetic field in water. The exfoliated niobate nanosheets were efficiently rolled-up to form nanoscrolls, which have a fine layered structure (d020 = 3.64 nm), by mixing with heptafluorobutanoylaminoethylhexadecyldimethylammonium bromide (C3F-S) in water, whereas the corresponding hydrocarbon analogue (C3H-S) did not form nanoscrolls. The synthetic yield for the purified and isolated nanoscrolls from the nanosheets was estimated to be 62% by weight. It was confirmed by atomic force microscopy (AFM) that most of the niobate nanosheets (98%) were converted to nanoscrolls. An external magnetic field was applied to the nanoscrolls to force them to align. After the magnetic treatment, the orientation of the nanoscrolls was investigated by small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The non-uniform ring distribution of the SAXS patterns indicates that the nanoscrolls dispersed in water were aligned well on applying the magnetic field. The long axis of the nanoscroll was oriented in the direction of the applied field and long nanoscrolls were aligned more efficiently. When the intercalated C3F-S molecules were removed from the nanoscrolls by treating with an acid, the resultant nanoscrolls did not exhibit magnetic alignment, strongly suggesting that C3F-S plays an important role in the orientation control of the nanoscrolls by the magnetic field.