ABSTRACT
Hydrogen bonds serve as important intermolecular interactions organizing the spatial arrangement of molecular crystals. Determining the hydrogen-bond orientations remains a challenging task. In the previous XRD study, the authors assumed a single crystal structure of 4-fluorophenol in which molecules form hexamer-ring clusters via anticlockwise hydrogen bonding. However, the existence of the other structure, which adopts clockwise hydrogen bonding, remains uncertain and warrants further exploration. We unveil distinctive fingerprint information associated with both structures by using high-resolution terahertz spectroscopy. The distinct structures result in different intramolecular geometries of 4-fluorophenol regarding the O-H bond configurations, which are manifested by a noticeable peak splitting in the 20-200 cm-1 frequency range. This result illustrates the sensitivity of THz spectroscopy to hydrogen-bond conformational polymorphism. Our findings represent a significant advancement in utilizing high-resolution THz spectroscopy to resolve hydrogen-bond orientations in molecular crystals with possible broad applicability across diverse hydrogen-bonded organic and inorganic framework materials.
ABSTRACT
This study introduces a novel paradigm for achieving widely tunable many-body Fano quantum interference in low-dimensional semiconducting nanostructures, beyond the conventional requirement of closely matched energy levels between discrete and continuum states observed in atomic Fano systems. Leveraging Floquet engineering, the remarkable tunability of Fano lineshapes is demonstrated, even when the original discrete and continuum states are separated by over 1 eV. Specifically, by controlling the quantum pathways of discrete phonon Raman scattering using femtosecond laser pulses, the Raman intermediate states across the excitonic Floquet band are tuned. This manipulation yields continuous transitions of Fano lineshapes from antiresonance to dispersive and to symmetric Lorentzian profiles, accompanied by significant variations in Fano parameter q and Raman intensity spanning 2 orders of magnitude. A subtle shift in the excitonic Floquet resonance is further shown, achieved by controlling the intensity of the femtosecond laser, which profoundly modifies quantum interference strength from destructive to constructive interference. The study reveals the crucial roles of Floquet engineering in coherent light-matter interactions and opens up new avenues for coherent control of Fano quantum interference over a broad energy spectrum in low-dimensional semiconducting nanostructures.
ABSTRACT
The substitution of fluorine atoms for oxygen atoms/hydroxyl groups has emerged as a promising strategy to enhance the physical and chemical properties of oxides/hydroxides in fluorine chemistry. However, distinguishing fluorine from oxygen/hydroxyl in the reaction products poses a significant challenge in existing characterization methods. In this study, we illustrate that terahertz (THz) spectroscopy provides a powerful tool for addressing this challenge. To this end, we investigated two fluorination reactions of boric acid, utilizing MHF2 (M=Na, C(NH2)3) as fluorine reagents. Through an interplay between THz spectroscopy and solid-state density functional theory, we have conclusively demonstrated that fluorine atoms exclusively bind with the sp3-boron but not with the sp2-boron in the reaction products of Na[B(OH)3][B3O3F2(OH)2] (NaBOFH) and [C(NH2)3]2B3O3F4OH (GBF2). Based on this evidence, we have proposed a reaction pathway for the fluorinations under investigation, a process previously hindered due to structural ambiguity. This work represents a step forward in gaining a deeper understanding of the precise structures and reaction mechanisms involved in the fluorination of oxides/hydroxides, illuminated by the insights provided by THz spectroscopy.
ABSTRACT
Atomically thin Ti3C2T x (MXene) nanosheets with rich termination groups, acting as active sites for effective functionalization, are used as an efficient solid support to host rhenium (Re) nanoparticles for the electrocatalytic hydrogen evolution reaction (HER). The newly designed electrocatalyst - Re nanoparticles anchored on Ti3C2T x MXene nanosheets (Re@Ti3C2T x ) - exhibited promising catalytic activity with a low overpotential of 298 mV to achieve a current density of 10 mV cm-2, while displaying excellent stability. In comparison, the pristine Ti3C2T x MXene requires higher overpotential of 584 mV to obtain the same current density. After being stored under ambient conditions for 30 days, Re@Ti3C2T x retained 100% of its initial catalytic activity for the HER, while the pristine Ti3C2T x retained only 74.8% of its initial value. According to our theoretical calculations using density functional theory, dual Re anchored MXene (Re@Ti3C2T x ) exhibits a near-zero value of Gibbs free energy (ΔG H* = -0.06 eV) for the HER, demonstrating that the presence of Re significantly enhances the electrocatalytic activity of MXene nanosheets. This work introduces a facile strategy to develop an effective electrocatalyst for electrocatalytic hydrogen production.
ABSTRACT
We report the synthesis and characterization of a 2D semiconductive and photoconductive coordination polymer. [Zn(TPPB)(Cl2)]·H2O (1) (TPPB = N 1,N 1,N 4,N 4-tetrakis(4-(pyridin-4-yl)phenyl)benzene-1,4-diamine) consists of a TPPB redox-active linker with bis(triarylamine) as the core. It consists of two redox sites connected with a benzene ring as a bridge. Thus, this forms an extended conjugation pathway when the TPPB ligand is coordinated with the Zn2+ metal ions. The single crystal conductivity measurement revealed conductivity of 1 to be in the range of 0.83 to 1.9 S cm-1. Band structure analysis predicted that 1 is a semiconductor from the delocalization of electronic transport in the network. The computational calculations show the difference in charge distribution between holes and electrons, which led to spatial separation. This implies a long charge carrier lifetime as indicated by lifetime measurement. Incorporating a bis(triarylamine)-based redox-active linker could lead to a new semiconductive scaffold material with photocatalytic applications.
ABSTRACT
Photoconductivity, a crucial property, determines the potential of semiconductor materials for use in optoelectronic and photocatalytic device applications. The one-dimensional metal-organic nanotube semiconducting material [{Re(CO)3}6(bho)(phpy)6]n (MBT 1, where bho is benzene-1,2,3,4,5,6-hexaoate and phpy is 4-phenylpyridine) reported herein exhibits record photocurrent responses at a broad spectral range. MBT 1 is comprised of a unique nanotube structure that is composed of six rhenium sites, six 4-phenylpyridine ligands, and a benzene-1,2,3,4,5,6-hexaoate unit. The highly organized self-assembled molecular bamboo tube MBT 1 displays semiconducting characteristics with a low activation energy of 1.63 meV. The alternating current (AC) and direct current (DC) conductivities of pellet devices are approximately 10-4 S/cm. For a single-crystal device, DC conductivity was found to be 1.5 S/cm, an unprecedented 10â¯000 times higher. The bandgap of MBT 1 was determined to be 1.03 eV, consistent with the theoretically estimated value of 1.2 eV. Theoretical calculations suggest that the unique structural architecture of MBT 1 allows for effective charge transport, which is facilitated by the spatial separation of electrons and holes that MBT 1 contains. This also eliminates fast charge recombination. The findings are not only chemically and fundamentally important but also have great potential for applications in innovative nano-optoelectronics.
ABSTRACT
The dielectric properties of coordination polymers has been a topic of recent interest, but the role of different functional groups on the dielectric properties of these polymers has not yet been fully addressed. Herein, the effects of electron-donating (R=NH2 ) and electron-withdrawing (R=NO2 ) groups on the dielectric behavior of such materials were investigated for two thermally stable and guest-free Zn-based coordination polymers, [Zn(L1 )(L2 )]n (1) and [Zn(L1 )(L3 )]n (2) [L1 =2-(2-pyridyl) benzimidazole (Pbim), L2 =5-aminoisophthalate (Aip), and L3 =5-nitroisophthalate (Nip)]. The results of dielectric studies of 1 revealed that it possesses a high dielectric constant (κ=65.5 at 1â kHz), while compound 2 displayed an even higher dielectric constant (κ=110.3 at 1â kHz). The electron donating and withdrawing effects of the NH2 and NO2 substituents induce changes in the polarity of the polymers, which is due to the inductive effect from the aryl ring for both NO2 and NH2 . Theoretical results from density functional theory (DFT) calculations, which also support the experimental findings, show that both compounds have a distinct electronic behavior with diverse wide bandgaps. The significance of the current work is to provide information about the structure-dielectric property relationships. So, this study promises to pave the way for further research on the effects of different functional groups on coordination polymers on their dielectric properties.
ABSTRACT
Ascertaining the function of in-plane intrinsic defects and edge atoms is necessary for developing efficient low-dimensional photocatalysts. We report the wireless photocatalytic CO2 reduction to CH4 over reconstructed edge atoms of monolayer 2H-WSe2 artificial leaves. Our first-principles calculations demonstrate that reconstructed and imperfect edge configurations enable CO2 binding to form linear and bent molecules. Experimental results show that the solar-to-fuel quantum efficiency is a reciprocal function of the flake size. It also indicates that the consumed electron rate per edge atom is two orders of magnitude larger than the in-plane intrinsic defects. Further, nanoscale redox mapping at the monolayer WSe2-liquid interface confirms that the edge is the most preferred region for charge transfer. Our results pave the way for designing a new class of monolayer transition metal dichalcogenides with reconstructed edges as a non-precious co-catalyst for wired or wireless hydrogen evolution or CO2 reduction reactions.
ABSTRACT
The methylammonium ion (CH3NH3+, or noted as MA-H+) is one of the smallest organic ammonium ions that play important roles in organic-inorganic halide perovskites. Despite the simple structure, the vibrational spectra of MA-H+ exhibit complicated features in the 3 µm region which are sensitive to the solvation environment. In the present work, we have applied the ab initio anharmonic algorithm at the CCSD/aug-cc-pVDZ level to simulate the IR and Raman spectra of the solvated methylammonium ion, MA-H+â¯X3, where X denotes the solvent molecules, to understand the Fermi resonance mechanism in which the overtones of NH bending modes are coupled with the fundamentals of NH stretching modes. The spectral features of the solvated clusters with proper solvent species resemble those observed in the perovskite crystal, indicating that they have similar solvation environments and hydrogen bond interactions. Therefore, a linkage between the gas-phase cluster models and the condensed-phase materials can be established, and our simulations and anharmonic analyses help in interpreting the spectral assignments of the observed IR and Raman spectra of perovskites reliably. Furthermore, we have extended this approach to the SFG spectra to demonstrate the selective appearance of bands depending on both the beam polarization configurations and the symmetry of vibrational modes.
ABSTRACT
A recent report on the azo coupling of 4-nitrobenzo-15-crown-ether (4NB15C) and 4-nitrothiophenol (4NTP) indicated that the reaction barrier could be reduced greatly with surface plasmonic effects on silver dendritic nanostructures in aqueous solution. Accordingly, an azo coupling reaction mechanism was proposed based on one or two SERS peaks. Toward a profound understanding of this azo coupling reaction mechanism, it is crucial to scrutinize the origin of the full SERS spectrum. Here, we construct a molecular model consisting of 4NTP and 4NB15C on an Ag7 cluster that simulates a silver dendritic nanostructure, and investigate the SERS spectra of the azo coupling of these two molecules. We propose five different adsorption sites and 13 different orientations of 4NTP on the Ag7 cluster and optimize the geometries of the five configurations. With each optimized configuration of 4NTP adsorbed on Ag7, we further consider the azo coupling product with a 4NB15C molecule and simulate the corresponding Raman spectra. Comparing the measured Raman spectra and model analysis, we conclude that the azo coupling reaction depends decisively on a parallel molecular orientation of the adsorbed 4NTP relative to the facets of Ag7, the orientation of which further directs the subsequent reaction for the product of 4NB15C-4NTP.
ABSTRACT
2D-layered materials have attracted increasing attention as low-cost supports for developing active catalysts for the hydrogen evolution reaction (HER). In addition, atomically thin Ti3 C2 Tx (MXene) nanosheets have surface termination groups (Tx : F, O, and OH), which are active sites for effective functionalization. In this work, heteroatom (boron)-doped Ti3 C2 Tx (MXene) nanosheets are developed as an efficient solid support to host ultrasmall ruthenium (Ru) nanoparticles for electrocatalytic HER. The quantum-mechanical first-principles calculations and electrochemical tests reveal that the B-doping onto 2D MXene nanosheets can largely improve the intermediate H* adsorption kinetics and reduce the charge-transfer resistance toward the HER, leading to increased reactivity of active sites and favorable electrode kinetics. Importantly, the newly designed electrocatalyst based on Ru nanoparticles supported on B-doped MXene (Ru@B-Ti3 C2 Tx ) nanosheets shows a remarkable catalytic activity with low overpotentials of 62.9 and 276.9 mV to drive 10 and 100 mA cm-2 , respectively, for the HER, while exhibiting excellent cycling stabilities. Moreover, according to the theoretical calculations, Ru@B-Ti3 C2 Tx exhibits a near-zero value of Gibbs free energy (ΔGH* = 0.002 eV) for the HER. This work introduces a facile strategy to functionalize MXene for use as a solid support for efficient electrocatalysts.
ABSTRACT
Solvent-dependent magnetism in Cu-based metal-organic frameworks (MOFs) is reported. Spin-flop magnetic behaviour occurs at different dehydrated states of MOFs. The oxygens of guest and coordinated water molecules are responsible as water removal tunes the coordination geometry around the Cu centre and the electronic structure of the framework.
ABSTRACT
Metal-organic frameworks (MOFs) are superior for multiple applications including drug delivery, sensing, and gas storage because of their tunable physiochemical properties and fascinating architectures. Optoelectronic application of MOFs is difficult because of their porous geometry and conductivity issues. Recently, a few optoelectronic devices have been fabricated by a suitable design of integrating MOFs with other materials. However, demonstration of laser action arising from MOFs as intrinsic gain media still remains challenging, even though some studies endeavor on encapsulating luminescence organic laser dyes into the porous skeleton of MOFs to achieve laser action. Unfortunately, the aggregation of such unstable laser dyes causes photoluminescence quenching and energy loss, which limits their practical application. In this research, unprecedently, we demonstrated ultralow-threshold (â¼13 nJ/cm2) MOF laser action by a judicious choice of metal nodes and organic linkers during synthesis of MOFs. Importantly, we also demonstrated that the white random lasing from the beautiful microflowers of organic linkers possesses a porous network, which is utilized to synthesize the MOFs. The highly luminescent broad-band organic linker 1,4-NDC, which itself exhibits a strong white random laser, is used not only to achieve the stimulated emission in MOFs but also to reduce the lasing threshold. Such white lasing has multiple applications from bioimaging to the recently developed versatile Li-Fi technology. In addition, we showed that the smooth facets of MOF microcrystals can show Fabry-Perot resonant cavities having a high quality factor of â¼103 with excellent photostability. Our unique discovery of stable, nontoxic, high-performance MOF laser action will open up a new route for the development of new optoelectronic devices.
ABSTRACT
The molecular mechanism of blue color formation in an iodine-starch reaction is studied by employing the iodine-α-cyclodextrin (α-CD) complex as a practical model system that resembles the structural properties of the blue amylose-iodine complex. To this end, we construct, using the quantum chemistry method, a molecular model of the complex (I5-/Li+/2α-CD) that consists of one I5-, two molecules of α-CD, and a lithium cation, and this model is employed as a basic unit in constructing the structural models of polyiodide ions (I5-)n. The initial structure in the geometry optimization is adopted from the α-CD-iodine complex structure obtained from the X-ray crystallography study. The structural models of (I5-)n are built by adding the basic unit n times along the crystal axis and by optimizing the structure using quantum mechanics/molecular mechanics (QM (iodine)/MM (α-CD)) calculations. The electronic absorption spectra of the resulting model structures are calculated by time-dependent density functional theory (TD-DFT). We find that I5- acts as a basic unit of coloration in the visible region. The visible color originates from the electronic transition within the I5- molecule, and any charge transfer between the I5- ion and either of α-CD or a coexisting counter cation is not involved. We also reveal that the electronic transitions of (I5-)n are delocalized, which accounts for the well-known observation that the color of the iodine-starch reaction becomes bluish with an increase in the chain length of amylose. Furthermore, the preresonance Raman spectra calculated from the model suggest that the vibrational motions are localized in the I5- subunit dominantly. A comparison between an experimental absorption spectrum feature of the α-CD-iodine complex and the calculated ones of (I5-)n ions with various n values suggests that (I5-)4 polyiodide ions tend to be populated dominantly in the α-CD-iodine complex under aqueous conditions.
ABSTRACT
Using low-wavenumber Raman spectroscopy in combination with theoretical calculations via solid-state density functional theory (DFT)-D3, we studied the vibrational structures and interaction with solvent of poly-l-proline and the oligoproline P12 series. The P12 series includes P12, the positively charged amino acid residue (arginine and lysine) N-terminus proline oligomers RP11 and KP11, and the C-terminus P11R and P11K. We assigned the spring-type phonon mode to 74-76 cm-1 bands for the PPI and PPII conformers and the carbonyl group ring-opening mode 122 cm-1 in the PPI conformer of poly-l-proline. Amide I and II were assigned based on the results of mode analysis for O, N, and C atom displacements. The broad band feature of the H-bond transverse mode in the Raman spectra indicates that the positively charged proline oligomers PPII form H-bonds with water in the solid phase, whereas P12 is relatively more hydrophobic. In propanol, the PPI conformer of the P12 series forms less H-bond network with the solvent. The PPII conformer exhibits a distinct Raman band at 310 cm-1, whereas the PPI has bands at 365, 660, and 960 cm-1 with reasonable intensity that can be used to quantitatively determine these two conformational forms. The 365 cm-1 mode comprising the motion of a C[double bond, length as m-dash]O group turning to the helix axis was used to monitor the isomerization reaction PPI â PPII. In pure propanol, RP11 and KP11 were found to have mostly PPI present, but P11R and P11K preferred PPII. After adding 20% water, the PPI in P11R and P11K was completely converted to PPII, whereas a small fraction of PPI remained in RP11 and KP11. The substituted positively charged amino acid affected the balance of the PPI/PPII population ratio.
ABSTRACT
Natural oxygen defects play a vital role in the integrity, functional properties, and performance of well-known two-dimensional (2D) materials. The recently discovered chromium triiodide (CrI3) monolayer is the first real 2D magnet. However, its interaction with oxygen remains an open fundamental question, an understanding of which is essential for further exploration of its application potentials. Employing the quantum first-principles calculation method, we investigated the influence of oxygen defects on the structural, electronic, and magnetic properties of the CrI3 monolayer at the atomic level. We considered two oxygen-defective CrI3 monolayers with either a single O-attached or single O-doped structure, comparing them with an un-defective pristine monolayer. The two different oxygen defects significantly affect the original architecture of the CrI3 monolayer, being energetically favorable and increasing the stability of the CrI3 monolayer. Moreover, these point defects introduce either deep band lines or middle gap states in the band structure. As a result, the bandgap of oxygen-defective monolayers is reduced by up to 58%, compared with the pristine sheet. Moreover, the magnetic property of the CrI3 monolayer is drastically induced by oxygen defects. Importantly, O-defective CrI3 monolayers possess robust exchange coupling parameters, suggesting relatively higher Curie temperature compared with the un-defective sheet. Our findings reveal that the natural oxygen defects in the CrI3 monolayer enrich its structural, electronic, and magnetic properties. Thus, the controlled oxidation can be an effective way to tune properties and functionalities of the CrI3 monolayer and other ultrathin magnetic materials.
ABSTRACT
Photocatalytic water splitting is a promising way to produce hydrogen fuel from solar energy. In this regard, the search for new photocatalytic materials that can efficiently split water into hydrogen is essential. Here, using first-principles simulations, we demonstrate that the dual-defective SnS2 (Ni-SnS2-VS), by both single-atom nickel doping and sulfur monovacancies, becomes a promising two-dimensional photocatalyst compared with SnS2. The Ni-SnS2-VS monolayer, in particular, exhibits a suitable band alignment that perfectly overcomes the redox potentials for overall water splitting. The dual-defective monolayer displays remarkable photocatalytic activity, a spatially separated carrier, a broadened optical absorption spectrum, and enhanced adsorption energy of H2O. Therefore, the dual-defective SnS2 monolayer can serve as an efficient photocatalyst for overall water splitting to produce hydrogen fuel. Furthermore, a novel dual-defect method can be an effective strategy to enhance the photocatalytic behavior of 2D materials; it may pave inroads in the development of solar-fuel generation.
ABSTRACT
This work proposes a terahertz (THz) spectroscopy approach to the investigation of one of the outstanding problems in crystallography-the structure analysis of a crystal with disorder. Form I of diflunisal, in which the two ortho sites on one phenyl ring of diflunisal show occupational disorder, was used for an illustration. THz radiation interacts with the collective vibrations of correlated disorder, thus providing a promising tool to examine the symmetry of short-range correlations of disordered atoms. Through a thorough examination of the selection rule of THz vibrations in which the disordered atoms are involved to different extents, we deduced that only four short-range correlation possibilities of disorder exist and all of them display unambiguous fingerprint peaks in the 50-170 cm-1 frequency region. We finally proposed an alternating packing model in which the correlation lengths of disorder are on the nanometer scale.
ABSTRACT
Designing highly conducting metal-organic frameworks (MOFs) is currently a subject of great interest for their potential applications in diverse areas encompassing energy storage and generation. Herein, a strategic design in which a metal-sulfur plane is integrated within a MOF to achieve high electrical conductivity, is successfully demonstrated. The MOF {[Cu2(6-Hmna)(6-mn)]·NH4}n (1, 6-Hmna = 6-mercaptonicotinic acid, 6-mn = 6-mercaptonicotinate), consisting of a two dimensional (-Cu-S-)n plane, is synthesized from the reaction of Cu(NO3)2, and 6,6'-dithiodinicotinic acid via the in situ cleavage of an S-S bond under hydrothermal conditions. A single crystal of the MOF is found to have a low activation energy (6 meV), small bandgap (1.34 eV) and a highest electrical conductivity (10.96 S cm-1) among MOFs for single crystal measurements. This approach provides an ideal roadmap for producing highly conductive MOFs with great potential for applications in batteries, thermoelectric, supercapacitors and related areas.