ABSTRACT
Tissue biofabrication that replicates an organ-specific architecture and function requires physiologically-relevant cell densities. Bioprinting using spheroids has the potential to create constructs with native cell densities, but its application is limited due to the lack of practical, scalable techniques. This study presents HITS-Bio (High-throughput Integrated Tissue Fabrication System for Bioprinting), a novel multiarray spheroid bioprinting technology enabling scalable tissue fabrication by rapidly positioning a number of spheroids simultaneously using a digitally-controlled nozzle array (DCNA) platform. HITS-Bio achieves an unprecedented speed, an order of magnitude faster compared to existing techniques while maintaining high cell viability (>90%). The platform's ability to pattern multiple spheroids simultaneously enhances fabrication rates proportionally to the size of DCNA used. The utility of HITS-Bio was exemplified in multiple applications, including intraoperative bioprinting with microRNA transfected spheroids for calvarial bone regeneration (â¼30 mm 3 ) in a rat model achieving a near-complete defect closure (â¼91% in 3 weeks and â¼96% in 6 weeks). Additionally, the successful fabrication of scalable cartilage constructs (1 cm 3 ) containing â¼600 chondrogenic spheroids highlights its high-throughput efficiency (under 40 min per construct) and potential for repairing volumetric tissue defects.
ABSTRACT
Cell aggregates are widely used to study heterotypic cellular interactions during the development of vascularization in vitro. In this study, we examined heterotypic cellular spheroids made of adipose-derived stem cells and CD34+/CD31- endothelial progenitor cells induced by the transfection of miR-148b mimic for de novo induction of osteogenic differentiation and miR-210 mimic for de novo induction of endotheliogenesis, respectively. The effect of the microRNA (miRs) mimic treatment group and induction time on codifferentiation was assessed in spheroids formed of transfected cells over the course of a 4-week culture. Based on gene and protein markers of osteogenic and endotheliogenic differentiation, as well as mineralization assays, our results showed that miRs directed cell differentiation and that progenitor maturity influenced the development of heterotypic cellular regions in aggregates. Overall, the success of coculture to create a prevascularized bone model is dependent on a number of factors, particularly the induction time of differentiation before combining the multiple cell types in aggregates. The approach that has been proposed could be valuable in creating vascularized bone tissue by employing spheroids as the building blocks of more complex issues through the use of cutting-edge methods such as 3D bioprinting.
ABSTRACT
A significant amount of organic carbon is transported in dissolved form from soils to coastal oceans via inland water systems, bridging land and ocean carbon reservoirs. However, it has been discovered that the presence of terrigenous dissolved organic carbon (tDOC) in oceans is relatively limited. Therefore, understanding the fates of tDOC in coastal oceans is essential to account for carbon sequestration through land ecosystems and ensure accurate regional carbon budgeting. In this study, we developed a state-of-the-art modeling approach by coupling a land-to-ocean tDOC flux simulation model and a coastal tDOC tracking model to determine the potential fates of tDOC exported from three primary drainage basins in the Gulf of Maine (GoM). According to our findings, over half a year in the GoM, 56.4% of tDOC was mineralized. Biomineralization was responsible for 90% of that amount, with the remainder attributed to photomineralization. Additionally, 37% of the tDOC remained suspended in the GoM, and 6.6% was buried in the marine sediment.
ABSTRACT
Current nucleic acid delivery methods have not achieved efficient, non-toxic delivery of miRNAs with tumor-specific selectivity. In this study, a new delivery system based on light-inducible gold-silver-gold, core-shell-shell (CSS) nanoparticles is presented. This system delivers small nucleic acid therapeutics with precise spatiotemporal control, demonstrating the potential for achieving tumor-specific selectivity and efficient delivery of miRNA mimics. The light-inducible particles leverage the photothermal heating of metal nanoparticles due to the local surface plasmonic resonance for controlled chemical cleavage and release of the miRNA mimic payload. The CSS morphology and composition result in a plasmonic resonance within the near-infrared (NIR) region of the light spectrum. Through this method, exogenous miR-34a-5p mimics are effectively delivered to human squamous cell carcinoma TE10 cells, leading to apoptosis induction without adverse effects on untransformed keratinocytes in vitro. The CSS nanoparticle delivery system is tested in vivo in Foxn1nu athymic nude mice with bilateral human esophageal TE10 cancer cells xenografts. These experiments reveal that this CSS nanoparticle conjugates, when systemically administered, followed by 850 nm light emitting diode irradiation at the tumor site, 6 h post-injection, produce a significant and sustained reduction in tumor volume, exceeding 87% in less than 72 h.
Subject(s)
Esophageal Neoplasms , Metal Nanoparticles , MicroRNAs , Nanoparticles , Animals , Mice , Humans , Mice, Nude , Nanoparticles/chemistry , MicroRNAs/genetics , Metal Nanoparticles/chemistry , Esophageal Neoplasms/drug therapy , Gold/chemistry , Cell Line, TumorABSTRACT
This study describes the development of an ultrasound-responsive polymer system that provides on-demand degradation when exposed to high-intensity focused ultrasound (HIFU). Diels-Alder cycloadducts were used to crosslink polycaprolactone (PCL) polymers and underwent a retro Diels-Alder reaction when stimulated with HIFU. Two Diels-Alder polymer compositions were explored to evaluate the link between reverse reaction energy barriers and polymer degradation rates. PCL crosslinked with isosorbide was also used as a non-Diels-Alder-based control polymer. An increase of HIFU exposure time and amplitude correlated with an increase of PCL degradation for Diels-Alder-based polymers. Ultrasound imaging during HIFU allowed for real-time visualization of the on-demand degradation through cavitation-based mechanisms. The temperature surrounding the sample was monitored with a thermocouple during HIFU stimulation; a minimal increase in temperature was observed. PCL polymers were characterized using Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), optical profilometry, and mechanical testing. PCL degradation byproducts were identified by mass spectrometry, and their cytocompatibility was evaluated in vitro. Overall, this study demonstrated that HIFU is an effective image-guided, external stimulus to control the degradation of Diels-Alder-based PCL polymers on-demand.
Subject(s)
Polyesters , Polymers , Polymers/chemistry , Polyesters/chemistry , Magnetic Resonance Spectroscopy , UltrasonographyABSTRACT
BACKGROUND: Timber harvesting and industrial wood processing laterally transfer the carbon stored in forest sectors to wood products creating a wood products carbon pool. The carbon stored in wood products is allocated to end-use wood products (e.g., paper, furniture), landfill, and charcoal. Wood products can store substantial amounts of carbon and contribute to the mitigation of greenhouse effects. Therefore, accurate accounts for the size of wood products carbon pools for different regions are essential to estimating the land-atmosphere carbon exchange by using the bottom-up approach of carbon stock change. RESULTS: To quantify the carbon stored in wood products, we developed a state-of-the-art estimator (Wood Products Carbon Storage Estimator, WPsCS Estimator) that includes the wood products disposal, recycling, and waste wood decomposition processes. The wood products carbon pool in this estimator has three subpools: (1) end-use wood products, (2) landfill, and (3) charcoal carbon. In addition, it has a user-friendly interface, which can be used to easily parameterize and calibrate an estimation. To evaluate its performance, we applied this estimator to account for the carbon stored in wood products made from the timber harvested in Maine, USA, and the carbon storage of wood products consumed in the United States. CONCLUSION: The WPsCS Estimator can efficiently and easily quantify the carbon stored in harvested wood products for a given region over a specific period, which was demonstrated with two illustrative examples. In addition, WPsCS Estimator has a user-friendly interface, and all parameters can be easily modified.
ABSTRACT
Stimuli-responsive hydrogel drug delivery systems are designed to release a payload when prompted by an external stimulus. These platforms have become prominent in the field of drug delivery due to their ability to provide spatial and temporal control for drug release. Among the different external triggers that have been used, ultrasound possesses several advantages: it is non-invasive, has deep tissue penetration, and can safely transmit acoustic energy to a localized area. This review summarizes the current state of understanding about ultrasound-responsive hydrogels used for drug delivery. The mechanisms of inducing payload release and activation using ultrasound are examined, along with the latest innovative formulations and hydrogel design strategies. We also report on the most recent applications leveraging ultrasound activation for both cancer treatment and tissue engineering. Finally, the future perspectives offered by ultrasound-sensitive hydrogels are discussed.
ABSTRACT
In this study, we utilized selectively modified, biodegradable polymer-based polyplexes to deliver custom, exogenous miR-148b mimics to induce apoptosis in human lung cancer (A549) cells. The gene regulatory effects of the payload miRNA mimics (miR-148b-3p) were first evaluated through bioinformatic analyses to uncover specific gene targets involved in critical carcinogenic pathways. Hyperbranched poly(ß amino ester) polyplexes (hPBAE) loaded with custom miR-148b mimics were then developed for targeted therapy. When evaluated in vitro, these hPBAE-based polyplexes sustained high intracellular uptake, low cytotoxicity, and efficient escape from endosomes to deliver functionally intact miRNA mimics to the cytosol. High-resolution confocal microscopy revealed successful intracellular uptake, cell viability was assessed through qualitative fluorescence microscopy and fluorescence-based DNA quantification, and successful cytosolic delivery of intact miRNA mimics was evaluated using real-time polymerase chain reaction (RT-PCR) to demonstrate target gene knockdown. The hPBAE-miRNA mimic polyplexes were shown to induce apoptosis among A549 cells through direct modulation of intracellular protein expression, targeting multiple potential carcinogenic pathways at the gene level. These results indicated that spatially controlled miR-148b mimic delivery can promote efficient cancer cell death in vitro and may lead to an enhanced therapeutic design for in vivo application.
Subject(s)
Esters , MicroRNAs , A549 Cells , Apoptosis , Cell Proliferation , Humans , MicroRNAs/genetics , Poly A , PolymersABSTRACT
The engineering of osteochondral interfaces remains a challenge. MicroRNAs (miRs) have emerged as significant tools to regulate the differentiation and proliferation of osteogenic and chondrogenic formation in the human musculoskeletal system. Here, we describe a novel approach to osteochondral reconstruction based on the three-dimensional (3D) bioprinting of miR-transfected adipose-derived stem cell (ADSC) spheroids to produce a heterotypic interface that addresses the intrinsic limitations of the traditional approach to inducing zonal differentiation via the use of diffusible cytokines. We evaluated the delivery of miR-148b for osteogenic differentiation and the codelivery of miR-140 and miR-21 for the chondrogenic differentiation of ADSC spheroids. Our results demonstrated that miR-transfected ADSC spheroids exhibited upregulated expression of osteogenic and chondrogenic differentiation related gene and protein markers, and enhanced mineralization and cell proliferation compared to spheroids differentiated using a commercially-available differentiation medium. Upon confirmation of the osteogenic and chondrogenic potential of miR-transfected ADSC spheroids, using aspiration-assisted bioprinting, these spheroids were 3D bioprinted into a dual-layer heterotypic osteochondral interface with a stratified arrangement of distinct osteogenic and chondrogenic zones. The proposed approach holds great promise for the biofabrication of stratified tissues, not only for the osteochondral interfaces presented in this work, but also for other composite tissues and tissue interfaces, such as, but not limited to, the bone-tendon-muscle interface and craniofacial tissues.
Subject(s)
Bioprinting , MicroRNAs , Bioprinting/methods , Cell Differentiation , Chondrogenesis , Humans , MicroRNAs/genetics , Osteogenesis , Tissue Engineering/methods , Tissue ScaffoldsABSTRACT
The development of tunable, ultrasound-responsive hydrogels that can deliver protein payload on-demand when exposed to focused ultrasound is described in this study. Reversible Diels-Alder linkers, which undergo a retro reaction when stimulated with ultrasound, were used to cross-link chitosan hydrogels with entrapped FITC-BSA as a model protein therapeutic payload. Two Diels-Alder linkage compositions with large differences in the reverse reaction energy barriers were compared to explore the influence of linker composition on ultrasound response. Selected physicochemical properties of the hydrogel construct, its basic degradation kinetics, and its cytocompatibility were measured with respect to Diels-Alder linkage composition. Focused ultrasound initiated the retro Diels-Alder reaction, controlling the release of the entrapped payload while also allowing for real-time visualization of the ongoing process. Additionally, increasing the focused ultrasound amplitude and time correlated with an increased rate of protein release, indicating stimuli responsive control.
Subject(s)
Chitosan , Hydrogels , Chitosan/chemistry , Cycloaddition Reaction , Hydrogels/chemistryABSTRACT
While tissue engineering investigators have appreciated adipose tissue as a repository of stromal/stem cells, they are only now beginning to see its value as a decellularized tissue resource. Independent academic investigators have successfully extracted lipid, genomic DNA and proteins from human fat to create a decellularized extracellular matrix enriched in collagen, glycoproteins, and proteoglycans. Pre-clinical studies have validated its compatibility with stromal/stem cells and its ability to support adipogenesis in vitro and in vivo in both small (murine) and large (porcine) subcutaneous implant models. Furthermore, Phase I safety clinical trials have injected decellularized human adipose tissue scaffolds in human volunteers without incident for periods of up to 127 days. This commentary takes an opinionated look at the under-appreciated but potential benefits of obesity as an increasingly available biomaterial resource.
ABSTRACT
Failure to regenerate the gradient tendon-bone interface of the enthesis results in poor clinical outcomes for surgical repair. The goal of this study was to evaluate the potential of composite cell sheets for engineering of the tendon-bone interface to improve regeneration of the functionally graded tissue. We hypothesize that stacking cell sheets at early stages of differentiation into tenogenic and osteogenic progenitors will create a composite structure with integrated layers. Cell sheets were fabricated on methyl cellulose and poly(N-isopropylacrylamide) thermally reversible polymers with human adipose-derived stem cells and differentiated into progenitors of tendon and bone with chemical induction media. Tenogenic and osteogenic cell sheets were stacked, and the engineered tendon-bone interface (TM-OM) was characterized in vitro in comparison to stacked cell sheet controls cultured in basal growth medium (GM-GM), osteogenic medium (OM-OM), and tenogenic medium (TM-TM). Samples were characterized by histology, quantitative real-time polymerase chain reaction, and immunofluorescent staining for markers of tendon, fibrocartilage, and bone including mineralization, scleraxis, tenomodulin, COL2, COLX, RUNX2, osteonectin, and osterix. After 1 week co-culture in basal growth medium, TM-OM cell sheets formed a tissue construct with integrated layers expressing markers of tendon, mineralized fibrocartilage, and bone with a spatial gradient in RUNX2 expression. Tenogenic cell sheets had increased expression of scleraxis and tenomodulin. Osteogenic cell sheets exhibited mineralization 1 week after stacking and upregulation of osterix and osteonectin. Additionally, in the engineered interface, there was significantly increased gene expression of IHH and COLX, indicative of endochondral ossification. These results highlight the potential for composite cell sheets fabricated with adipose-derived stem cells for engineering of the tendon-bone interface. Impact statement This study presents a method for fabrication of the tendon-bone interface using stacked cell sheets of tenogenic and osteogenic progenitors differentiated from human adipose-derived mesenchymal stem cells, resulting in a composite structure expressing markers of tendon, mineralized fibrocartilage, and bone. This work is an important step toward regeneration of the biological gradient of the enthesis and demonstrates the potential for engineering complex tissue interfaces from a single autologous cell source to facilitate clinical translation.
Subject(s)
Core Binding Factor Alpha 1 Subunit , Mesenchymal Stem Cells , Cell Differentiation , Core Binding Factor Alpha 1 Subunit/metabolism , Humans , Osteonectin/metabolism , Tendons/metabolism , Tissue Engineering/methodsABSTRACT
Decellularized extracellular matrix (ECM) from tissues is a promising biomaterial that can provide a complex 3D microenvironment capable of modulating cell response and tissue regeneration. In this study, we have integrated the decellularized thiolated adipose-derived ECM, at different concentrations, with polyethylene glycol (PEG) using Michael addition between thiol and acrylate moieties. The potential for this material to support adipogenic differentiation of human adipose-derived stem cells was evaluated by encapsulating cells in hydrogels with increasing concentrations of chemically modified ECM (mECM). Our results demonstrated a positive correlation between the ECM content in the hydrogels and cell proliferation, adipogenic marker expression, and lipid formation and accumulation. Furthermore, we have shown host cell infiltration and enhanced adipogenesis in vivo after implantation. These findings support the graft as a potential alternative for adipose tissue regeneration.
Subject(s)
Extracellular Matrix , Tissue Scaffolds , Adipogenesis , Adipose Tissue , Biocompatible Materials/chemistry , Extracellular Matrix/chemistry , Humans , Hydrogels/chemistry , Hydrogels/pharmacology , Tissue Engineering/methods , Tissue Scaffolds/chemistryABSTRACT
Engineered bone grafts require a vascular network to supply cells with oxygen, nutrients and remove waste. Using heterotypic mature cells to create these graftsin vivohas resulted in limited cell density, ectopic tissue formation and disorganized tissue. Despite evidence that progenitor cell aggregates, such as progenitor spheroids, are a potential candidate for fabrication of native-like pre-vascularized bone tissue, the factors dictating progenitor co-differentiation to create heterotypic pre-vascularized bone tissue remains poorly understood. In this study, we examined a three-dimensional heterotypic pre-vascularized bone tissue model, using osteogenic and endotheliogenic progenitor spheroids induced by miR-148b and miR-210 mimic transfection, respectively. Spheroids made of transfected cells were assembled into heterotypic structures to determine the impact on co-differentiation as a function of micro-RNA (miRNA) mimic treatment group and induction time. Our results demonstrated that miRNAs supported the differentiation in heterotypic structures, and that developing heterotypic structures is determined in part by progenitor maturity, as confirmed by gene and protein markers of osteogenic and endotheliogenic differentiation and the mineralization assay. As a proof of concept, miRNA-transfected spheroids were also bioprinted using aspiration-assisted bioprinting and organized into hollow structures to mimic the Haversian canal. Overall, the presented approach could be useful in fabrication of vascularized bone tissue using spheroids as building blocks.
Subject(s)
Adipose Tissue , Cell Differentiation , Osteogenesis , Stem Cells , MicroRNAs/genetics , Tissue Engineering , Tissue ScaffoldsABSTRACT
The lateral flux of dissolved organic carbon (DOC) from soils to inland waters and ultimately to the ocean represents a fundamental component of the global carbon cycle. To estimate the DOC flux, we developed an empirical terrestrial-aquatic DOC fluxes model (TAF-DOC). TAF-DOC incorporates various environmental factors (e.g., meteorology, sulfur, and nitrogen deposition) that to-date have not been comprehensively considered or well-represented in existing modeling frameworks. TAF-DOC was applied to estimate spatial-temporal patterns of DOC flux and potential fates across the conterminous United States during the 1985 to 2018 time period. Our results suggest that TAF-DOC successfully characterized spatial-temporal of DOC flux. As expected, the interannual pattern of DOC flux was strongly regulated by precipitation, but the long-term trend was significantly influenced by the rate of atmospheric wet sulfur deposition. From 1985 to 2018, TAF-DOC estimated DOC loading from terrestrial to aquatic ecosystems in the conterminous United States to be 33.5 ± 2.2 TgC per year, which was roughly 0.39-0.49% of total soil organic carbon stock estimates. The dominant fate of terrestrially-derived DOC was delivery to the coastal ocean in riverine export (41%), with another 21% buried in sediment and the remaining 12.8 ± 0.4 TgC per year (38%) returned to the atmosphere through outgassing from inland waters. Assuming the quantities of DOC sediment burial and export to the ocean as an annual sink of terrestrially-derived carbon, budget inventories and models that do not account for DOC flux in the conterminous United States will underestimate the net annual carbon sink by as much as 5.5-6.4%.
ABSTRACT
International regulatory agencies such as the Food and Drug Administration have mandated that the scientific community develop humanized microphysiological systems (MPS) as an in vitro alternative to animal models in the near future. While the breast cancer research community has long appreciated the importance of three-dimensional growth dynamics in their experimental models, there are remaining obstacles preventing a full conversion to humanized MPS for drug discovery and pathophysiological studies. This perspective evaluates the current status of human tissue-derived cells and scaffolds as building blocks for an "idealized" breast cancer MPS based on bioengineering design principles. It considers the utility of adipose tissue as a potential source of endothelial, lymphohematopoietic, and stromal cells for the support of breast cancer epithelial cells. The relative merits of potential MPS scaffolds derived from adipose tissue, blood components, and synthetic biomaterials is evaluated relative to the current "gold standard" material, Matrigel, a murine chondrosarcoma-derived basement membrane-enriched hydrogel. The advantages and limitations of a humanized breast cancer MPS are discussed in the context of in-process and destructive read-out assays. Impact statement Regulatory authorities have highlighted microphysiological systems as an emerging tool in breast cancer research. This has been led by calls for more predictive human models and reduced animal experimentation. This perspective describes how human-derived cells, extracellular matrices, and hydrogels will provide the building blocks to create breast cancer models that accurately reflect diversity at multiple levels, that is, patient ethnicity, pathophysiology, and metabolic status.
Subject(s)
Breast Neoplasms , Animals , Bioengineering , Female , Humans , Mice , United StatesABSTRACT
The role of time in estimating the cost of forest carbon is often ignored in the literature, nor does the literature address the issues of where and when the purchase of forest carbon storage becomes socially beneficial. In our study, we identify the spatial and temporal allocations of forest carbon investments that are socially beneficial based on empirical analysis. We use the Central and Southern Appalachian region in the Eastern United States as a case study over three periods (i.e., 1992-2001, 2001-2006, and 2006-2011) that are roughly in line with moderate, upturn, and downturn market conditions. The areas from which it is socially beneficial to buy carbon storage are mainly in flat terrain and further away from urban boundaries, hence facing lower development pressure and lower urban net returns. These areas also have less urban land and more forestland. The mapping of carbon cost over the three market conditions in our case study also indicates that the socially beneficial carbon area shrinks as the opportunity cost increases when the real-estate market evolves from a moderately growing to a booming market. The socially beneficial carbon area shrinks further as the demand from urban development on forestland collapses when the real-estate market enters a downturn stage.
Subject(s)
Carbon , Forests , Appalachian Region , Carbon/analysis , United StatesABSTRACT
In this study, CD34+/CD31- progenitor cells were isolated from the stromal vascular fraction (SVF) of adipose tissue using magnetic activated cell sorting. The endothelial differentiation capability of these cells in vitro was evaluated by culturing them in vascular endothelial growth factor (VEGF) induced medium for 14 days. Viability, proliferation, differentiation and tube formation of these cells were evaluated. Cell viability study revealed that both undifferentiated and endothelial differentiated cells remained healthy for 14 days. However, the proliferation rate was higher in undifferentiated cells compared to endothelial differentiated ones. Upregulation of endothelial characteristic genes (Von Willebrand Factor (vWF) and VE Cadherin) was observed in 2D culture. However, PECAM (CD31) was only found to be upregulated after the cells had formed tube-like structures in 3D Matrigel culture. These results indicate that adipose derived CD34+/CD31- cells when cultured in VEGF induced medium, are capable differentiation into endothelial-like lineages. Tube formation of the cells started 3h after seeding the cells on Matrigel and formed more stable and connected network 24 h post seeding in presence of VEGF.
ABSTRACT
Acute and chronic skin wounds due to burns, pressure injuries, and trauma represent a substantial challenge to healthcare delivery with particular impacts on geriatric, paraplegic, and quadriplegic demographics worldwide. Nevertheless, the current standard of care relies extensively on preventive measures to mitigate pressure injury, surgical debridement, skin flap procedures, and negative pressure wound vacuum measures. This article highlights the potential of adipose-, blood-, and cellulose-derived products (cells, decellularized matrices and scaffolds, and exosome and secretome factors) as a means to address this unmet medical need. The current status of this research area is evaluated and discussed in the context of promising avenues for future discovery.
Subject(s)
Burns/therapy , Exosomes/transplantation , Hydrogels/therapeutic use , Wound Healing/genetics , Burns/pathology , Cell- and Tissue-Based Therapy/trends , Cellulose/therapeutic use , Exosomes/genetics , Humans , Hydrogels/chemistry , Mesenchymal Stem Cell Transplantation/trends , Mesenchymal Stem Cells/cytology , Skin/growth & development , Skin/injuries , Skin/metabolismABSTRACT
While decellularized adipose tissue (DAT) has potential as an "off-the-shelf" biomaterial product for regenerative medicine, it remains to be determined if donor-source body mass index (BMI) impacts the functionality of DAT. This study set out to comparatively characterize lean versus overweight/obese-donor derived DAT hydrogel based on proteome and to analyze their respective effects on adipose stromal/stem cell (ASC) viability, and differentiation in vitro. Decellularized adipose tissue from lean (lDAT) and overweight/obese (oDAT) donors is produced and characterized. Variability in the fibril microstructures is found, with dense fibrotic fiber clusters and large pore area uniquely present in the oDAT samples. Proteomic analysis reveals that lDAT contains a greater proportion of enriched extracellular proteins and a smaller proportion of enriched intracellular proteins relative to oDAT. Biocompatibility studies show that ASCs cultured in lDAT and oDAT hydrogels remain viable. The adipogenic and osteogenic differentiation capability of ASCs seeded in lDAT and oDAT hydrogels is confirmed by an upregulation in marker gene expression and phenotypic analysis. In conclusion, this study establishes that DAT hydrogels derived from lean and overweight/obese adipose donors present similar physicochemical profiles with some distinctive features while comparably supporting the viability and adipogenic differentiation of ASCs in vitro.